new file mode 100644
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/socionext,synquacer-netsec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext NetSec Ethernet Controller IP
+
+maintainers:
+ - Jassi Brar <jaswinder.singh@linaro.org>
+ - Ilias Apalodimas <ilias.apalodimas@linaro.org>
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+properties:
+ compatible:
+ const: socionext,synquacer-netsec
+
+ reg:
+ items:
+ - description: control register area
+ - description: EEPROM holding the MAC address and microengine firmware
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: phy_ref_clk
+
+ dma-coherent: true
+
+ interrupts:
+ maxItems: 1
+
+ mdio:
+ $ref: mdio.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - mdio
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ ethernet@522d0000 {
+ compatible = "socionext,synquacer-netsec";
+ reg = <0x522d0000 0x10000>, <0x10000000 0x10000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_netsec>;
+ clock-names = "phy_ref_clk";
+ phy-mode = "rgmii";
+ max-speed = <1000>;
+ max-frame-size = <9000>;
+ phy-handle = <&phy1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+ };
+ };
+...
deleted file mode 100644
@@ -1,56 +0,0 @@
-* Socionext NetSec Ethernet Controller IP
-
-Required properties:
-- compatible: Should be "socionext,synquacer-netsec"
-- reg: Address and length of the control register area, followed by the
- address and length of the EEPROM holding the MAC address and
- microengine firmware
-- interrupts: Should contain ethernet controller interrupt
-- clocks: phandle to the PHY reference clock
-- clock-names: Should be "phy_ref_clk"
-- phy-mode: See ethernet.txt file in the same directory
-- phy-handle: See ethernet.txt in the same directory.
-
-- mdio device tree subnode: When the Netsec has a phy connected to its local
- mdio, there must be device tree subnode with the following
- required properties:
-
- - #address-cells: Must be <1>.
- - #size-cells: Must be <0>.
-
- For each phy on the mdio bus, there must be a node with the following
- fields:
- - compatible: Refer to phy.txt
- - reg: phy id used to communicate to phy.
-
-Optional properties: (See ethernet.txt file in the same directory)
-- dma-coherent: Boolean property, must only be present if memory
- accesses performed by the device are cache coherent.
-- max-speed: See ethernet.txt in the same directory.
-- max-frame-size: See ethernet.txt in the same directory.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt. The 'phy-mode' property is required, but may
-be set to the empty string if the PHY configuration is programmed by
-the firmware or set by hardware straps, and needs to be preserved.
-
-Example:
- eth0: ethernet@522d0000 {
- compatible = "socionext,synquacer-netsec";
- reg = <0 0x522d0000 0x0 0x10000>, <0 0x10000000 0x0 0x10000>;
- interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_netsec>;
- clock-names = "phy_ref_clk";
- phy-mode = "rgmii";
- max-speed = <1000>;
- max-frame-size = <9000>;
- phy-handle = <&phy1>;
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- phy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
- };
@@ -19029,7 +19029,7 @@ M: Jassi Brar <jaswinder.singh@linaro.org>
M: Ilias Apalodimas <ilias.apalodimas@linaro.org>
L: netdev@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/net/socionext-netsec.txt
+F: Documentation/devicetree/bindings/net/socionext,synquacer-netsec.yaml
F: drivers/net/ethernet/socionext/netsec.c
SOCIONEXT (SNI) Synquacer SPI DRIVER
Convert the Socionext NetSec Ethernet binding to DT schema format. Signed-off-by: Rob Herring <robh@kernel.org> --- .../net/socionext,synquacer-netsec.yaml | 73 +++++++++++++++++++ .../bindings/net/socionext-netsec.txt | 56 -------------- MAINTAINERS | 2 +- 3 files changed, 74 insertions(+), 57 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/socionext,synquacer-netsec.yaml delete mode 100644 Documentation/devicetree/bindings/net/socionext-netsec.txt