| Message ID | 20221213095938.1280861-1-biju.das.jz@bp.renesas.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net-next] ravb: Fix "failed to switch device to config mode" message during unbind | expand |
On Tue, Dec 13, 2022 at 09:59:38AM +0000, Biju Das wrote: > This patch fixes the error "ravb 11c20000.ethernet eth0: failed to switch > device to config mode" during unbind. > > We are doing register access after pm_runtime_put_sync(). > > We usually do cleanup in reverse order of init. Currently in > remove(), the "pm_runtime_put_sync" is not in reverse order. > > Probe > reset_control_deassert(rstc); > pm_runtime_enable(&pdev->dev); > pm_runtime_get_sync(&pdev->dev); > > remove > pm_runtime_put_sync(&pdev->dev); > unregister_netdev(ndev); > .. > ravb_mdio_release(priv); > pm_runtime_disable(&pdev->dev); > > Consider the call to unregister_netdev() > unregister_netdev->unregister_netdevice_queue->rollback_registered_many > that calls the below functions which access the registers after > pm_runtime_put_sync() > 1) ravb_get_stats > 2) ravb_close > > Fixes: a0d2f20650e8 ("Renesas Ethernet AVB PTP clock driver") I don't know how you came to this fixes line, but the more correct one is c156633f1353 ("Renesas Ethernet AVB driver proper") Ant the title should need to be "PATCH net". When you resend the patch, feel free to add my tag. Thanks, Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Hi Leon Romanovsky, Thanks for the feedback. > Subject: Re: [PATCH net-next] ravb: Fix "failed to switch device to config > mode" message during unbind > > On Tue, Dec 13, 2022 at 09:59:38AM +0000, Biju Das wrote: > > This patch fixes the error "ravb 11c20000.ethernet eth0: failed to > > switch device to config mode" during unbind. > > > > We are doing register access after pm_runtime_put_sync(). > > > > We usually do cleanup in reverse order of init. Currently in remove(), > > the "pm_runtime_put_sync" is not in reverse order. > > > > Probe > > reset_control_deassert(rstc); > > pm_runtime_enable(&pdev->dev); > > pm_runtime_get_sync(&pdev->dev); > > > > remove > > pm_runtime_put_sync(&pdev->dev); > > unregister_netdev(ndev); > > .. > > ravb_mdio_release(priv); > > pm_runtime_disable(&pdev->dev); > > > > Consider the call to unregister_netdev() > > unregister_netdev->unregister_netdevice_queue->rollback_registered_man > > y that calls the below functions which access the registers after > > pm_runtime_put_sync() > > 1) ravb_get_stats > > 2) ravb_close > > > > Fixes: a0d2f20650e8 ("Renesas Ethernet AVB PTP clock driver") > > I don't know how you came to this fixes line, but the more correct one is > c156633f1353 ("Renesas Ethernet AVB driver proper") I got the details from [1]. The file name is renamed immediately after c156633f1353. So from Stable backporting point I feel [1] is better. What do you think? [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/net/ethernet/renesas/ravb_main.c?h=next-20221214&id=a0d2f20650e81407d8e51ad2cbdc492861c74e9c > > Ant the title should need to be "PATCH net". > > When you resend the patch, feel free to add my tag. > > Thanks, > Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
On Wed, Dec 14, 2022 at 08:07:55AM +0000, Biju Das wrote: > Hi Leon Romanovsky, > > Thanks for the feedback. > > > Subject: Re: [PATCH net-next] ravb: Fix "failed to switch device to config > > mode" message during unbind > > > > On Tue, Dec 13, 2022 at 09:59:38AM +0000, Biju Das wrote: > > > This patch fixes the error "ravb 11c20000.ethernet eth0: failed to > > > switch device to config mode" during unbind. > > > > > > We are doing register access after pm_runtime_put_sync(). > > > > > > We usually do cleanup in reverse order of init. Currently in remove(), > > > the "pm_runtime_put_sync" is not in reverse order. > > > > > > Probe > > > reset_control_deassert(rstc); > > > pm_runtime_enable(&pdev->dev); > > > pm_runtime_get_sync(&pdev->dev); > > > > > > remove > > > pm_runtime_put_sync(&pdev->dev); > > > unregister_netdev(ndev); > > > .. > > > ravb_mdio_release(priv); > > > pm_runtime_disable(&pdev->dev); > > > > > > Consider the call to unregister_netdev() > > > unregister_netdev->unregister_netdevice_queue->rollback_registered_man > > > y that calls the below functions which access the registers after > > > pm_runtime_put_sync() > > > 1) ravb_get_stats > > > 2) ravb_close > > > > > > Fixes: a0d2f20650e8 ("Renesas Ethernet AVB PTP clock driver") > > > > I don't know how you came to this fixes line, but the more correct one is > > c156633f1353 ("Renesas Ethernet AVB driver proper") > > I got the details from [1]. The file name is renamed immediately after c156633f1353. > > So from Stable backporting point I feel [1] is better. No, you should use correct tag from the beginning, @stable will figure it. Thanks
> Subject: Re: [PATCH net-next] ravb: Fix "failed to switch device to config > mode" message during unbind > > On Wed, Dec 14, 2022 at 08:07:55AM +0000, Biju Das wrote: > > Hi Leon Romanovsky, > > > > Thanks for the feedback. > > > > > Subject: Re: [PATCH net-next] ravb: Fix "failed to switch device to > > > config mode" message during unbind > > > > > > On Tue, Dec 13, 2022 at 09:59:38AM +0000, Biju Das wrote: > > > > This patch fixes the error "ravb 11c20000.ethernet eth0: failed to > > > > switch device to config mode" during unbind. > > > > > > > > We are doing register access after pm_runtime_put_sync(). > > > > > > > > We usually do cleanup in reverse order of init. Currently in > > > > remove(), the "pm_runtime_put_sync" is not in reverse order. > > > > > > > > Probe > > > > reset_control_deassert(rstc); > > > > pm_runtime_enable(&pdev->dev); > > > > pm_runtime_get_sync(&pdev->dev); > > > > > > > > remove > > > > pm_runtime_put_sync(&pdev->dev); > > > > unregister_netdev(ndev); > > > > .. > > > > ravb_mdio_release(priv); > > > > pm_runtime_disable(&pdev->dev); > > > > > > > > Consider the call to unregister_netdev() > > > > unregister_netdev->unregister_netdevice_queue->rollback_registered > > > > _man y that calls the below functions which access the registers > > > > after > > > > pm_runtime_put_sync() > > > > 1) ravb_get_stats > > > > 2) ravb_close > > > > > > > > Fixes: a0d2f20650e8 ("Renesas Ethernet AVB PTP clock driver") > > > > > > I don't know how you came to this fixes line, but the more correct > > > one is > > > c156633f1353 ("Renesas Ethernet AVB driver proper") > > > > I got the details from [1]. The file name is renamed immediately after > c156633f1353. > > > > So from Stable backporting point I feel [1] is better. > > No, you should use correct tag from the beginning, @stable will figure it. OK will send v2 with PATCH net and correct fixes tag. Cheers, Biju
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 33f723a9f471..b4e0fc7f65bd 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -2903,12 +2903,12 @@ static int ravb_remove(struct platform_device *pdev) priv->desc_bat_dma); /* Set reset mode */ ravb_write(ndev, CCC_OPC_RESET, CCC); - pm_runtime_put_sync(&pdev->dev); unregister_netdev(ndev); if (info->nc_queues) netif_napi_del(&priv->napi[RAVB_NC]); netif_napi_del(&priv->napi[RAVB_BE]); ravb_mdio_release(priv); + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); reset_control_assert(priv->rstc); free_netdev(ndev);
This patch fixes the error "ravb 11c20000.ethernet eth0: failed to switch device to config mode" during unbind. We are doing register access after pm_runtime_put_sync(). We usually do cleanup in reverse order of init. Currently in remove(), the "pm_runtime_put_sync" is not in reverse order. Probe reset_control_deassert(rstc); pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); remove pm_runtime_put_sync(&pdev->dev); unregister_netdev(ndev); .. ravb_mdio_release(priv); pm_runtime_disable(&pdev->dev); Consider the call to unregister_netdev() unregister_netdev->unregister_netdevice_queue->rollback_registered_many that calls the below functions which access the registers after pm_runtime_put_sync() 1) ravb_get_stats 2) ravb_close Fixes: a0d2f20650e8 ("Renesas Ethernet AVB PTP clock driver") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- drivers/net/ethernet/renesas/ravb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)