diff mbox series

[v3,01/15] scsi: Add struct for args to execution functions

Message ID 20221214235001.57267-2-michael.christie@oracle.com (mailing list archive)
State Superseded
Headers show
Series scsi: Add struct for args to execution functions | expand

Commit Message

Mike Christie Dec. 14, 2022, 11:49 p.m. UTC
This begins to move the SCSI execution functions to use a struct for
passing in optional args. This patch adds the new struct, temporarily
converts scsi_execute and scsi_execute_req ands a new helper,
scsi_execute_cmd, which takes the scsi_exec_args struct.

There should be no change in behavior. We no longer alilow users to pass
in any request->rq_flags valu, but they were only passing in RQF_QUIET
which we do support by allowing users to pass in the BLK_MQ_REQ flags used
by blk_mq_alloc_request.

The next patches will convert scsi_execute and scsi_execute_req users to
the new helpers then remove scsi_execute and scsi_execute_req.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
---
 drivers/scsi/scsi_lib.c    | 52 ++++++++++++++++++--------------------
 include/scsi/scsi_device.h | 51 +++++++++++++++++++++++++++----------
 2 files changed, 62 insertions(+), 41 deletions(-)

Comments

Bart Van Assche Dec. 15, 2022, 1:13 a.m. UTC | #1
On 12/14/22 15:49, Mike Christie wrote:
> This begins to move the SCSI execution functions to use a struct for
> passing in optional args. This patch adds the new struct, temporarily
> converts scsi_execute and scsi_execute_req ands a new helper,
> scsi_execute_cmd, which takes the scsi_exec_args struct.
> 
> There should be no change in behavior. We no longer alilow users to pass
                                                       ^^^^^^
                                                       allow?
> in any request->rq_flags valu, but they were only passing in RQF_QUIET
                            ^^^^                                ^^^^^^^^^
                            value?                              RQF_PM?
> which we do support by allowing users to pass in the BLK_MQ_REQ flags used
> by blk_mq_alloc_request.
> 
> The next patches will convert scsi_execute and scsi_execute_req users to
> the new helpers then remove scsi_execute and scsi_execute_req.

After the patch description has been updated, please add:

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Christoph Hellwig Dec. 15, 2022, 8:13 a.m. UTC | #2
Looks good:

Reviewed-by: Christoph Hellwig <hch@lst.de>
John Garry Dec. 15, 2022, 9:59 a.m. UTC | #3
On 14/12/2022 23:49, Mike Christie wrote:
> This begins to move the SCSI execution functions to use a struct for
> passing in optional args. This patch adds the new struct, temporarily
> converts scsi_execute and scsi_execute_req ands a new helper,
> scsi_execute_cmd, which takes the scsi_exec_args struct.
> 
> There should be no change in behavior. We no longer alilow users to pass
> in any request->rq_flags valu, but they were only passing in RQF_QUIET
> which we do support by allowing users to pass in the BLK_MQ_REQ flags used
> by blk_mq_alloc_request.
> 
> The next patches will convert scsi_execute and scsi_execute_req users to
> the new helpers then remove scsi_execute and scsi_execute_req.
> 
> Signed-off-by: Mike Christie<michael.christie@oracle.com>

Reviewed-by: John Garry <john.g.garry@oracle.com>

> ---
>   drivers/scsi/scsi_lib.c    | 52 ++++++++++++++++++--------------------
>   include/scsi/scsi_device.h | 51 +++++++++++++++++++++++++++----------
>   2 files changed, 62 insertions(+), 41 deletions(-)

...

>   
> -	req = scsi_alloc_request(sdev->request_queue,
> -			data_direction == DMA_TO_DEVICE ?
> -			REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
> -			rq_flags & RQF_PM ? BLK_MQ_REQ_PM : 0);
> +	if (!args)
> +		args = &default_args;
> +	else if (WARN_ON_ONCE(args->sense &&
> +			      args->sense_len != SCSI_SENSE_BUFFERSIZE))

As mentioned elsewhere, this size check is not fool proof as it does 
rely on the caller to set sense_len to what really is the size of the 
memory pointed to by args->sense. Better than nothing, I suppose.

> +		return -EINVAL;
> +
diff mbox series

Patch

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index a29d87e57430..7baad7ec8887 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -185,39 +185,37 @@  void scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
 	__scsi_queue_insert(cmd, reason, true);
 }
 
-
 /**
- * __scsi_execute - insert request and wait for the result
- * @sdev:	scsi device
+ * scsi_execute_cmd - insert request and wait for the result
+ * @sdev:	scsi_device
  * @cmd:	scsi command
- * @data_direction: data direction
+ * @opf:	block layer request cmd_flags
  * @buffer:	data buffer
  * @bufflen:	len of buffer
- * @sense:	optional sense buffer
- * @sshdr:	optional decoded sense header
  * @timeout:	request timeout in HZ
  * @retries:	number of times to retry request
- * @flags:	flags for ->cmd_flags
- * @rq_flags:	flags for ->rq_flags
- * @resid:	optional residual length
+ * @args:	Optional args. See struct definition for field descriptions
  *
  * Returns the scsi_cmnd result field if a command was executed, or a negative
  * Linux error code if we didn't get that far.
  */
-int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
-		 int data_direction, void *buffer, unsigned bufflen,
-		 unsigned char *sense, struct scsi_sense_hdr *sshdr,
-		 int timeout, int retries, blk_opf_t flags,
-		 req_flags_t rq_flags, int *resid)
+int scsi_execute_cmd(struct scsi_device *sdev, const unsigned char *cmd,
+		     blk_opf_t opf, void *buffer, unsigned int bufflen,
+		     int timeout, int retries,
+		     const struct scsi_exec_args *args)
 {
+	static const struct scsi_exec_args default_args;
 	struct request *req;
 	struct scsi_cmnd *scmd;
 	int ret;
 
-	req = scsi_alloc_request(sdev->request_queue,
-			data_direction == DMA_TO_DEVICE ?
-			REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
-			rq_flags & RQF_PM ? BLK_MQ_REQ_PM : 0);
+	if (!args)
+		args = &default_args;
+	else if (WARN_ON_ONCE(args->sense &&
+			      args->sense_len != SCSI_SENSE_BUFFERSIZE))
+		return -EINVAL;
+
+	req = scsi_alloc_request(sdev->request_queue, opf, args->req_flags);
 	if (IS_ERR(req))
 		return PTR_ERR(req);
 
@@ -232,8 +230,7 @@  int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 	memcpy(scmd->cmnd, cmd, scmd->cmd_len);
 	scmd->allowed = retries;
 	req->timeout = timeout;
-	req->cmd_flags |= flags;
-	req->rq_flags |= rq_flags | RQF_QUIET;
+	req->rq_flags |= RQF_QUIET;
 
 	/*
 	 * head injection *required* here otherwise quiesce won't work
@@ -249,20 +246,21 @@  int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 	if (unlikely(scmd->resid_len > 0 && scmd->resid_len <= bufflen))
 		memset(buffer + bufflen - scmd->resid_len, 0, scmd->resid_len);
 
-	if (resid)
-		*resid = scmd->resid_len;
-	if (sense && scmd->sense_len)
-		memcpy(sense, scmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
-	if (sshdr)
+	if (args->resid)
+		*args->resid = scmd->resid_len;
+	if (args->sense)
+		memcpy(args->sense, scmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
+	if (args->sshdr)
 		scsi_normalize_sense(scmd->sense_buffer, scmd->sense_len,
-				     sshdr);
+				     args->sshdr);
+
 	ret = scmd->result;
  out:
 	blk_mq_free_request(req);
 
 	return ret;
 }
-EXPORT_SYMBOL(__scsi_execute);
+EXPORT_SYMBOL(scsi_execute_cmd);
 
 /*
  * Wake up the error handler if necessary. Avoid as follows that the error
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 3642b8e3928b..f6b33c6c1064 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -455,28 +455,51 @@  extern const char *scsi_device_state_name(enum scsi_device_state);
 extern int scsi_is_sdev_device(const struct device *);
 extern int scsi_is_target_device(const struct device *);
 extern void scsi_sanitize_inquiry_string(unsigned char *s, int len);
-extern int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
-			int data_direction, void *buffer, unsigned bufflen,
-			unsigned char *sense, struct scsi_sense_hdr *sshdr,
-			int timeout, int retries, blk_opf_t flags,
-			req_flags_t rq_flags, int *resid);
+
+/* Optional arguments to scsi_execute_cmd */
+struct scsi_exec_args {
+	unsigned char *sense;		/* sense buffer */
+	unsigned int sense_len;		/* sense buffer len */
+	struct scsi_sense_hdr *sshdr;	/* decoded sense header */
+	blk_mq_req_flags_t req_flags;	/* BLK_MQ_REQ flags */
+	int *resid;			/* residual length */
+};
+
+int scsi_execute_cmd(struct scsi_device *sdev, const unsigned char *cmd,
+		     blk_opf_t opf, void *buffer, unsigned int bufflen,
+		     int timeout, int retries,
+		     const struct scsi_exec_args *args);
+
 /* Make sure any sense buffer is the correct size. */
-#define scsi_execute(sdev, cmd, data_direction, buffer, bufflen, sense,	\
-		     sshdr, timeout, retries, flags, rq_flags, resid)	\
+#define scsi_execute(_sdev, _cmd, _data_dir, _buffer, _bufflen, _sense,	\
+		     _sshdr, _timeout, _retries, _flags, _rq_flags,	\
+		     _resid)						\
 ({									\
-	BUILD_BUG_ON((sense) != NULL &&					\
-		     sizeof(sense) != SCSI_SENSE_BUFFERSIZE);		\
-	__scsi_execute(sdev, cmd, data_direction, buffer, bufflen,	\
-		       sense, sshdr, timeout, retries, flags, rq_flags,	\
-		       resid);						\
+	scsi_execute_cmd(_sdev, _cmd, (_data_dir == DMA_TO_DEVICE ?	\
+			 REQ_OP_DRV_OUT : REQ_OP_DRV_IN) | _flags,	\
+			 _buffer, _bufflen, _timeout, _retries,	\
+			 &(struct scsi_exec_args) {			\
+				.sense = _sense,			\
+				.sshdr = _sshdr,			\
+				.req_flags = _rq_flags & RQF_PM  ?	\
+						BLK_MQ_REQ_PM : 0,	\
+				.resid = _resid,			\
+			 });						\
 })
+
 static inline int scsi_execute_req(struct scsi_device *sdev,
 	const unsigned char *cmd, int data_direction, void *buffer,
 	unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
 	int retries, int *resid)
 {
-	return scsi_execute(sdev, cmd, data_direction, buffer,
-		bufflen, NULL, sshdr, timeout, retries,  0, 0, resid);
+	return scsi_execute_cmd(sdev, cmd,
+				data_direction == DMA_TO_DEVICE ?
+				REQ_OP_DRV_OUT : REQ_OP_DRV_IN, buffer,
+				bufflen, timeout, retries,
+				&(struct scsi_exec_args) {
+					.sshdr = sshdr,
+					.resid = resid,
+				});
 }
 extern void sdev_disable_disk_events(struct scsi_device *sdev);
 extern void sdev_enable_disk_events(struct scsi_device *sdev);