diff mbox series

[2/2] dt-bindings: usb: rockchip,dwc3: Move RK3399 to its own schema

Message ID 20221219191038.1973807-2-robh@kernel.org (mailing list archive)
State New, archived
Headers show
Series [1/2] dt-bindings: usb: snps,dwc3: Allow power-domains property | expand

Commit Message

Rob Herring (Arm) Dec. 19, 2022, 7:10 p.m. UTC
The rockchip,dwc3.yaml schema defines a single DWC3 node, but the RK3399
uses the discouraged parent wrapper node and child 'generic' DWC3 node.
The intent was to modify the RK3399 DTs to use a single node, but the DT
changes were rejected for ABI reasons. However, the schema was accepted
as-is.

To fix this, we need to move the RK3399 binding to its own schema file.
The RK3328 and RK3568 bindings are correct and use a single node.

Cc: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../bindings/usb/rockchip,dwc3.yaml           |  10 +-
 .../bindings/usb/rockchip,rk3399-dwc3.yaml    | 115 ++++++++++++++++++
 2 files changed, 119 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/rockchip,rk3399-dwc3.yaml

Comments

Felipe Balbi Dec. 20, 2022, 7:37 a.m. UTC | #1
Rob Herring <robh@kernel.org> writes:

> The rockchip,dwc3.yaml schema defines a single DWC3 node, but the RK3399
> uses the discouraged parent wrapper node and child 'generic' DWC3 node.

Why discouraged? Splitting those two separate devices (yes, they are
separate physical modules) has greatly simplified e.g. power management
and encapsulation of the core module.
Rob Herring (Arm) Dec. 20, 2022, 1:54 p.m. UTC | #2
On Tue, Dec 20, 2022 at 1:37 AM Felipe Balbi <balbi@kernel.org> wrote:
>
> Rob Herring <robh@kernel.org> writes:
>
> > The rockchip,dwc3.yaml schema defines a single DWC3 node, but the RK3399
> > uses the discouraged parent wrapper node and child 'generic' DWC3 node.
>
> Why discouraged? Splitting those two separate devices (yes, they are
> separate physical modules) has greatly simplified e.g. power management
> and encapsulation of the core module.

Sometimes they are separate and that's fine, but often it's just
different clocks, resets, etc. and that's no different from every
other block. If there's wrapper registers or something clearly extra,
then I agree a wrapper parent node makes sense. Otherwise, for cases
like RK3399, I don't think it does, but we're stuck with it now.

Also, we have this pattern pretty much nowhere else and DWC3 is not special.

Rob
Felipe Balbi Dec. 23, 2022, 10:34 a.m. UTC | #3
Rob Herring <robh@kernel.org> writes:

> On Tue, Dec 20, 2022 at 1:37 AM Felipe Balbi <balbi@kernel.org> wrote:
>>
>> Rob Herring <robh@kernel.org> writes:
>>
>> > The rockchip,dwc3.yaml schema defines a single DWC3 node, but the RK3399
>> > uses the discouraged parent wrapper node and child 'generic' DWC3 node.
>>
>> Why discouraged? Splitting those two separate devices (yes, they are
>> separate physical modules) has greatly simplified e.g. power management
>> and encapsulation of the core module.
>
> Sometimes they are separate and that's fine, but often it's just
> different clocks, resets, etc. and that's no different from every
> other block.

Right, then the argument is that all other blocks are not modelling the
HW as they should :)

> If there's wrapper registers or something clearly extra, then I agree
> a wrapper parent node makes sense.

There's always wrapper-specific registers. Some wrappers even add custom
functionality. IIRC Qcom added a HW-based URB "scheduler" or some sort.

> Otherwise, for cases like RK3399, I don't think it does, but we're
> stuck with it now.
>
> Also, we have this pattern pretty much nowhere else and DWC3 is not
> special.

No, it's not. But it could just be the first example of the driver
actually modelling the underlying HW.

In any case, I was just curious with your opinion that this model is
discouraged, as it's not stated anywhere in the kernel's documentation.

Happy holidays
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
index b3798d94d2fd..edb130c780e4 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
@@ -29,7 +29,6 @@  select:
       contains:
         enum:
           - rockchip,rk3328-dwc3
-          - rockchip,rk3399-dwc3
           - rockchip,rk3568-dwc3
   required:
     - compatible
@@ -39,7 +38,6 @@  properties:
     items:
       - enum:
           - rockchip,rk3328-dwc3
-          - rockchip,rk3399-dwc3
           - rockchip,rk3568-dwc3
       - const: snps,dwc3
 
@@ -90,7 +88,7 @@  required:
 
 examples:
   - |
-    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/clock/rk3328-cru.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     bus {
@@ -98,11 +96,11 @@  examples:
       #size-cells = <2>;
 
       usbdrd3_0: usb@fe800000 {
-        compatible = "rockchip,rk3399-dwc3", "snps,dwc3";
+        compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
         reg = <0x0 0xfe800000 0x0 0x100000>;
         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
-                 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
+        clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+                <&cru ACLK_USB3OTG>;
         clock-names = "ref_clk", "suspend_clk",
                       "bus_clk", "grf_clk";
         dr_mode = "otg";
diff --git a/Documentation/devicetree/bindings/usb/rockchip,rk3399-dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,rk3399-dwc3.yaml
new file mode 100644
index 000000000000..e39a8a3a7ab3
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/rockchip,rk3399-dwc3.yaml
@@ -0,0 +1,115 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/rockchip,rk3399-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3399 SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3399-dwc3
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+  ranges: true
+
+  clocks:
+    items:
+      - description:
+          Controller reference clock, must to be 24 MHz
+      - description:
+          Controller suspend clock, must to be 24 MHz or 32 KHz
+      - description:
+          Master/Core clock, must to be >= 62.5 MHz for SS
+          operation and >= 30MHz for HS operation
+      - description:
+          USB3 aclk peri
+      - description:
+          USB3 aclk
+      - description:
+          Controller grf clock
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: suspend_clk
+      - const: bus_clk
+      - const: aclk_usb3_rksoc_axi_perf
+      - const: aclk_usb3
+      - const: grf_clk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: usb3-otg
+
+patternProperties:
+  '^usb@':
+    $ref: snps,dwc3.yaml#
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/power/rk3399-power.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb {
+            compatible = "rockchip,rk3399-dwc3";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+            clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+              <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+              <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+            clock-names = "ref_clk", "suspend_clk",
+                    "bus_clk", "aclk_usb3_rksoc_axi_perf",
+                    "aclk_usb3", "grf_clk";
+            resets = <&cru SRST_A_USB3_OTG0>;
+            reset-names = "usb3-otg";
+
+            usb@fe800000 {
+                compatible = "snps,dwc3";
+                reg = <0x0 0xfe800000 0x0 0x100000>;
+                interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>,
+                  <&cru SCLK_USB3OTG0_SUSPEND>;
+                clock-names = "ref", "bus_early", "suspend";
+                dr_mode = "otg";
+                phys = <&u2phy0_otg>, <&tcphy0_usb3>;
+                phy-names = "usb2-phy", "usb3-phy";
+                phy_type = "utmi_wide";
+                snps,dis_enblslpm_quirk;
+                snps,dis-u2-freeclk-exists-quirk;
+                snps,dis_u2_susphy_quirk;
+                snps,dis-del-phy-power-chg-quirk;
+                snps,dis-tx-ipgap-linecheck-quirk;
+                power-domains = <&power RK3399_PD_USB3>;
+            };
+        };
+    };
+...