diff mbox series

[v14,3/8] block: add block layer APIs resembling Linux ZonedBlockDevice ioctls

Message ID 20221219072919.6204-4-faithilikerun@gmail.com (mailing list archive)
State New, archived
Headers show
Series Add support for zoned device | expand

Commit Message

Sam Li Dec. 19, 2022, 7:29 a.m. UTC
Add a new zoned_host_device BlockDriver. The zoned_host_device option
accepts only zoned host block devices. By adding zone management
operations in this new BlockDriver, users can use the new block
layer APIs including Report Zone and four zone management operations
(open, close, finish, reset, reset_all).

Qemu-io uses the new APIs to perform zoned storage commands of the device:
zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
zone_finish(zf).

For example, to test zone_report, use following command:
$ ./build/qemu-io --image-opts -n driver=zoned_host_device, filename=/dev/nullb0
-c "zrp offset nr_zones"

Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 block/block-backend.c             | 147 ++++++++++++
 block/file-posix.c                | 364 ++++++++++++++++++++++++++++++
 block/io.c                        |  41 ++++
 include/block/block-io.h          |   7 +
 include/block/block_int-common.h  |  21 ++
 include/block/raw-aio.h           |   6 +-
 include/sysemu/block-backend-io.h |  18 ++
 meson.build                       |   4 +
 qapi/block-core.json              |   8 +-
 qemu-io-cmds.c                    | 149 ++++++++++++
 10 files changed, 762 insertions(+), 3 deletions(-)

Comments

Stefan Hajnoczi Dec. 20, 2022, 8:58 p.m. UTC | #1
On Mon, Dec 19, 2022 at 03:29:14PM +0800, Sam Li wrote:
> Add a new zoned_host_device BlockDriver. The zoned_host_device option
> accepts only zoned host block devices. By adding zone management
> operations in this new BlockDriver, users can use the new block
> layer APIs including Report Zone and four zone management operations
> (open, close, finish, reset, reset_all).
> 
> Qemu-io uses the new APIs to perform zoned storage commands of the device:
> zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
> zone_finish(zf).
> 
> For example, to test zone_report, use following command:
> $ ./build/qemu-io --image-opts -n driver=zoned_host_device, filename=/dev/nullb0
> -c "zrp offset nr_zones"
> 
> Signed-off-by: Sam Li <faithilikerun@gmail.com>
> Reviewed-by: Hannes Reinecke <hare@suse.de>
> ---
>  block/block-backend.c             | 147 ++++++++++++
>  block/file-posix.c                | 364 ++++++++++++++++++++++++++++++
>  block/io.c                        |  41 ++++
>  include/block/block-io.h          |   7 +
>  include/block/block_int-common.h  |  21 ++
>  include/block/raw-aio.h           |   6 +-
>  include/sysemu/block-backend-io.h |  18 ++
>  meson.build                       |   4 +
>  qapi/block-core.json              |   8 +-
>  qemu-io-cmds.c                    | 149 ++++++++++++
>  10 files changed, 762 insertions(+), 3 deletions(-)

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
diff mbox series

Patch

diff --git a/block/block-backend.c b/block/block-backend.c
index ba7bf1d6bc..a4847b9131 100644
--- a/block/block-backend.c
+++ b/block/block-backend.c
@@ -1451,6 +1451,15 @@  typedef struct BlkRwCo {
     void *iobuf;
     int ret;
     BdrvRequestFlags flags;
+    union {
+        struct {
+            unsigned int *nr_zones;
+            BlockZoneDescriptor *zones;
+        } zone_report;
+        struct {
+            unsigned long op;
+        } zone_mgmt;
+    };
 } BlkRwCo;
 
 int blk_make_zero(BlockBackend *blk, BdrvRequestFlags flags)
@@ -1795,6 +1804,144 @@  int coroutine_fn blk_co_flush(BlockBackend *blk)
     return ret;
 }
 
+static void coroutine_fn blk_aio_zone_report_entry(void *opaque)
+{
+    BlkAioEmAIOCB *acb = opaque;
+    BlkRwCo *rwco = &acb->rwco;
+
+    rwco->ret = blk_co_zone_report(rwco->blk, rwco->offset,
+                                   rwco->zone_report.nr_zones,
+                                   rwco->zone_report.zones);
+    blk_aio_complete(acb);
+}
+
+BlockAIOCB *blk_aio_zone_report(BlockBackend *blk, int64_t offset,
+                                unsigned int *nr_zones,
+                                BlockZoneDescriptor  *zones,
+                                BlockCompletionFunc *cb, void *opaque)
+{
+    BlkAioEmAIOCB *acb;
+    Coroutine *co;
+    IO_CODE();
+
+    blk_inc_in_flight(blk);
+    acb = blk_aio_get(&blk_aio_em_aiocb_info, blk, cb, opaque);
+    acb->rwco = (BlkRwCo) {
+        .blk    = blk,
+        .offset = offset,
+        .ret    = NOT_DONE,
+        .zone_report = {
+            .zones = zones,
+            .nr_zones = nr_zones,
+        },
+    };
+    acb->has_returned = false;
+
+    co = qemu_coroutine_create(blk_aio_zone_report_entry, acb);
+    bdrv_coroutine_enter(blk_bs(blk), co);
+
+    acb->has_returned = true;
+    if (acb->rwco.ret != NOT_DONE) {
+        replay_bh_schedule_oneshot_event(blk_get_aio_context(blk),
+                                         blk_aio_complete_bh, acb);
+    }
+
+    return &acb->common;
+}
+
+static void coroutine_fn blk_aio_zone_mgmt_entry(void *opaque)
+{
+    BlkAioEmAIOCB *acb = opaque;
+    BlkRwCo *rwco = &acb->rwco;
+
+    rwco->ret = blk_co_zone_mgmt(rwco->blk, rwco->zone_mgmt.op,
+                                 rwco->offset, acb->bytes);
+    blk_aio_complete(acb);
+}
+
+BlockAIOCB *blk_aio_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
+                              int64_t offset, int64_t len,
+                              BlockCompletionFunc *cb, void *opaque) {
+    BlkAioEmAIOCB *acb;
+    Coroutine *co;
+    IO_CODE();
+
+    blk_inc_in_flight(blk);
+    acb = blk_aio_get(&blk_aio_em_aiocb_info, blk, cb, opaque);
+    acb->rwco = (BlkRwCo) {
+        .blk    = blk,
+        .offset = offset,
+        .ret    = NOT_DONE,
+        .zone_mgmt = {
+            .op = op,
+        },
+    };
+    acb->bytes = len;
+    acb->has_returned = false;
+
+    co = qemu_coroutine_create(blk_aio_zone_mgmt_entry, acb);
+    bdrv_coroutine_enter(blk_bs(blk), co);
+
+    acb->has_returned = true;
+    if (acb->rwco.ret != NOT_DONE) {
+        replay_bh_schedule_oneshot_event(blk_get_aio_context(blk),
+                                         blk_aio_complete_bh, acb);
+    }
+
+    return &acb->common;
+}
+
+/*
+ * Send a zone_report command.
+ * offset is a byte offset from the start of the device. No alignment
+ * required for offset.
+ * nr_zones represents IN maximum and OUT actual.
+ */
+int coroutine_fn blk_co_zone_report(BlockBackend *blk, int64_t offset,
+                                    unsigned int *nr_zones,
+                                    BlockZoneDescriptor *zones)
+{
+    int ret;
+    IO_CODE();
+
+    blk_inc_in_flight(blk); /* increase before waiting */
+    blk_wait_while_drained(blk);
+    if (!blk_is_available(blk)) {
+        blk_dec_in_flight(blk);
+        return -ENOMEDIUM;
+    }
+    ret = bdrv_co_zone_report(blk_bs(blk), offset, nr_zones, zones);
+    blk_dec_in_flight(blk);
+    return ret;
+}
+
+/*
+ * Send a zone_management command.
+ * op is the zone operation;
+ * offset is the byte offset from the start of the zoned device;
+ * len is the maximum number of bytes the command should operate on. It
+ * should be aligned with the device zone size.
+ */
+int coroutine_fn blk_co_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
+        int64_t offset, int64_t len)
+{
+    int ret;
+    IO_CODE();
+
+    blk_inc_in_flight(blk);
+    blk_wait_while_drained(blk);
+
+    ret = blk_check_byte_request(blk, offset, len);
+    if (ret < 0) {
+        blk_dec_in_flight(blk);
+        return ret;
+    }
+
+    ret = bdrv_co_zone_mgmt(blk_bs(blk), op, offset, len);
+    blk_dec_in_flight(blk);
+    return ret;
+}
+
 void blk_drain(BlockBackend *blk)
 {
     BlockDriverState *bs = blk_bs(blk);
diff --git a/block/file-posix.c b/block/file-posix.c
index 676dd65c65..269c5b508a 100644
--- a/block/file-posix.c
+++ b/block/file-posix.c
@@ -67,6 +67,9 @@ 
 #include <sys/param.h>
 #include <sys/syscall.h>
 #include <sys/vfs.h>
+#if defined(CONFIG_BLKZONED)
+#include <linux/blkzoned.h>
+#endif
 #include <linux/cdrom.h>
 #include <linux/fd.h>
 #include <linux/fs.h>
@@ -215,6 +218,13 @@  typedef struct RawPosixAIOData {
             PreallocMode prealloc;
             Error **errp;
         } truncate;
+        struct {
+            unsigned int *nr_zones;
+            BlockZoneDescriptor *zones;
+        } zone_report;
+        struct {
+            unsigned long op;
+        } zone_mgmt;
     };
 } RawPosixAIOData;
 
@@ -1350,6 +1360,50 @@  static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
         zoned = BLK_Z_NONE;
     }
     bs->bl.zoned = zoned;
+    if (zoned != BLK_Z_NONE) {
+        /*
+         * The zoned device must at least have zone size and nr_zones fields.
+         */
+        ret = get_sysfs_long_val(&st, "chunk_sectors");
+        if (ret < 0) {
+            error_setg_errno(errp, -ret, "Unable to read chunk_sectors "
+                                         "sysfs attribute");
+            goto out;
+        } else if (!ret) {
+            error_setg(errp, "Read 0 from chunk_sectors sysfs attribute");
+            goto out;
+        }
+        bs->bl.zone_size = ret << BDRV_SECTOR_BITS;
+
+        ret = get_sysfs_long_val(&st, "nr_zones");
+        if (ret < 0) {
+            error_setg_errno(errp, -ret, "Unable to read nr_zones "
+                                         "sysfs attribute");
+            goto out;
+        } else if (!ret) {
+            error_setg(errp, "Read 0 from nr_zones sysfs attribute");
+            goto out;
+        }
+        bs->bl.nr_zones = ret;
+
+        ret = get_sysfs_long_val(&st, "zone_append_max_bytes");
+        if (ret > 0) {
+            bs->bl.max_append_sectors = ret >> BDRV_SECTOR_BITS;
+        }
+
+        ret = get_sysfs_long_val(&st, "max_open_zones");
+        if (ret >= 0) {
+            bs->bl.max_open_zones = ret;
+        }
+
+        ret = get_sysfs_long_val(&st, "max_active_zones");
+        if (ret >= 0) {
+            bs->bl.max_active_zones = ret;
+        }
+        return;
+    }
+out:
+    bs->bl.zoned = BLK_Z_NONE;
 }
 
 static int check_for_dasd(int fd)
@@ -1384,6 +1438,24 @@  static int hdev_probe_blocksizes(BlockDriverState *bs, BlockSizes *bsz)
     return probe_physical_blocksize(s->fd, &bsz->phys);
 }
 
+#if defined(CONFIG_BLKZONED)
+/**
+ * Zoned storage needs to be virtualized with the correct physical block size
+ * and logical block size.
+ */
+static int hdev_probe_zoned_blocksizes(BlockDriverState *bs, BlockSizes *bsz)
+{
+    BDRVRawState *s = bs->opaque;
+    int ret;
+
+    ret = probe_logical_blocksize(s->fd, &bsz->log);
+    if (ret < 0) {
+        return ret;
+    }
+    return probe_physical_blocksize(s->fd, &bsz->phys);
+}
+#endif
+
 /**
  * Try to get @bs's geometry: cyls, heads, sectors.
  * On success, store them in @geo and return 0.
@@ -1844,6 +1916,146 @@  static off_t copy_file_range(int in_fd, off_t *in_off, int out_fd,
 }
 #endif
 
+/*
+ * parse_zone - Fill a zone descriptor
+ */
+#if defined(CONFIG_BLKZONED)
+static inline int parse_zone(struct BlockZoneDescriptor *zone,
+                              const struct blk_zone *blkz) {
+    zone->start = blkz->start << BDRV_SECTOR_BITS;
+    zone->length = blkz->len << BDRV_SECTOR_BITS;
+    zone->wp = blkz->wp << BDRV_SECTOR_BITS;
+
+#ifdef HAVE_BLK_ZONE_REP_CAPACITY
+    zone->cap = blkz->capacity << BDRV_SECTOR_BITS;
+#else
+    zone->cap = blkz->len << BDRV_SECTOR_BITS;
+#endif
+
+    switch (blkz->type) {
+    case BLK_ZONE_TYPE_SEQWRITE_REQ:
+        zone->type = BLK_ZT_SWR;
+        break;
+    case BLK_ZONE_TYPE_SEQWRITE_PREF:
+        zone->type = BLK_ZT_SWP;
+        break;
+    case BLK_ZONE_TYPE_CONVENTIONAL:
+        zone->type = BLK_ZT_CONV;
+        break;
+    default:
+        error_report("Unsupported zone type: 0x%x", blkz->type);
+        return -ENOTSUP;
+    }
+
+    switch (blkz->cond) {
+    case BLK_ZONE_COND_NOT_WP:
+        zone->state = BLK_ZS_NOT_WP;
+        break;
+    case BLK_ZONE_COND_EMPTY:
+        zone->state = BLK_ZS_EMPTY;
+        break;
+    case BLK_ZONE_COND_IMP_OPEN:
+        zone->state = BLK_ZS_IOPEN;
+        break;
+    case BLK_ZONE_COND_EXP_OPEN:
+        zone->state = BLK_ZS_EOPEN;
+        break;
+    case BLK_ZONE_COND_CLOSED:
+        zone->state = BLK_ZS_CLOSED;
+        break;
+    case BLK_ZONE_COND_READONLY:
+        zone->state = BLK_ZS_RDONLY;
+        break;
+    case BLK_ZONE_COND_FULL:
+        zone->state = BLK_ZS_FULL;
+        break;
+    case BLK_ZONE_COND_OFFLINE:
+        zone->state = BLK_ZS_OFFLINE;
+        break;
+    default:
+        error_report("Unsupported zone state: 0x%x", blkz->cond);
+        return -ENOTSUP;
+    }
+    return 0;
+}
+#endif
+
+#if defined(CONFIG_BLKZONED)
+static int handle_aiocb_zone_report(void *opaque)
+{
+    RawPosixAIOData *aiocb = opaque;
+    int fd = aiocb->aio_fildes;
+    unsigned int *nr_zones = aiocb->zone_report.nr_zones;
+    BlockZoneDescriptor *zones = aiocb->zone_report.zones;
+    /* zoned block devices use 512-byte sectors */
+    uint64_t sector = aiocb->aio_offset / 512;
+
+    struct blk_zone *blkz;
+    size_t rep_size;
+    unsigned int nrz;
+    int ret, n = 0, i = 0;
+
+    nrz = *nr_zones;
+    rep_size = sizeof(struct blk_zone_report) + nrz * sizeof(struct blk_zone);
+    g_autofree struct blk_zone_report *rep = NULL;
+    rep = g_malloc(rep_size);
+
+    blkz = (struct blk_zone *)(rep + 1);
+    while (n < nrz) {
+        memset(rep, 0, rep_size);
+        rep->sector = sector;
+        rep->nr_zones = nrz - n;
+
+        do {
+            ret = ioctl(fd, BLKREPORTZONE, rep);
+        } while (ret != 0 && errno == EINTR);
+        if (ret != 0) {
+            error_report("%d: ioctl BLKREPORTZONE at %" PRId64 " failed %d",
+                         fd, sector, errno);
+            return -errno;
+        }
+
+        if (!rep->nr_zones) {
+            break;
+        }
+
+        for (i = 0; i < rep->nr_zones; i++, n++) {
+            ret = parse_zone(&zones[n], &blkz[i]);
+            if (ret != 0) {
+                return ret;
+            }
+
+            /* The next report should start after the last zone reported */
+            sector = blkz[i].start + blkz[i].len;
+        }
+    }
+
+    *nr_zones = n;
+    return 0;
+}
+#endif
+
+#if defined(CONFIG_BLKZONED)
+static int handle_aiocb_zone_mgmt(void *opaque)
+{
+    RawPosixAIOData *aiocb = opaque;
+    int fd = aiocb->aio_fildes;
+    uint64_t sector = aiocb->aio_offset / 512;
+    int64_t nr_sectors = aiocb->aio_nbytes / 512;
+    struct blk_zone_range range;
+    int ret;
+
+    /* Execute the operation */
+    range.sector = sector;
+    range.nr_sectors = nr_sectors;
+    do {
+        ret = ioctl(fd, aiocb->zone_mgmt.op, &range);
+    } while (ret != 0 && errno == EINTR);
+
+    return ret;
+}
+#endif
+
 static int handle_aiocb_copy_range(void *opaque)
 {
     RawPosixAIOData *aiocb = opaque;
@@ -3037,6 +3249,107 @@  static void raw_account_discard(BDRVRawState *s, uint64_t nbytes, int ret)
     }
 }
 
+/*
+ * zone report - Get a zone block device's information in the form
+ * of an array of zone descriptors.
+ * zones is an array of zone descriptors to hold zone information on reply;
+ * offset can be any byte within the entire size of the device;
+ * nr_zones is the maxium number of sectors the command should operate on.
+ */
+#if defined(CONFIG_BLKZONED)
+static int coroutine_fn raw_co_zone_report(BlockDriverState *bs, int64_t offset,
+                                           unsigned int *nr_zones,
+                                           BlockZoneDescriptor *zones) {
+    BDRVRawState *s = bs->opaque;
+    RawPosixAIOData acb;
+
+    acb = (RawPosixAIOData) {
+        .bs         = bs,
+        .aio_fildes = s->fd,
+        .aio_type   = QEMU_AIO_ZONE_REPORT,
+        .aio_offset = offset,
+        .zone_report    = {
+            .nr_zones       = nr_zones,
+            .zones          = zones,
+        },
+    };
+
+    return raw_thread_pool_submit(bs, handle_aiocb_zone_report, &acb);
+}
+#endif
+
+/*
+ * zone management operations - Execute an operation on a zone
+ */
+#if defined(CONFIG_BLKZONED)
+static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op,
+        int64_t offset, int64_t len) {
+    BDRVRawState *s = bs->opaque;
+    RawPosixAIOData acb;
+    int64_t zone_size, zone_size_mask;
+    const char *op_name;
+    unsigned long zo;
+    int ret;
+    int64_t capacity = bs->total_sectors << BDRV_SECTOR_BITS;
+
+    zone_size = bs->bl.zone_size;
+    zone_size_mask = zone_size - 1;
+    if (offset & zone_size_mask) {
+        error_report("sector offset %" PRId64 " is not aligned to zone size "
+                     "%" PRId64 "", offset / 512, zone_size / 512);
+        return -EINVAL;
+    }
+
+    if (((offset + len) < capacity && len & zone_size_mask) ||
+        offset + len > capacity) {
+        error_report("number of sectors %" PRId64 " is not aligned to zone size"
+                      " %" PRId64 "", len / 512, zone_size / 512);
+        return -EINVAL;
+    }
+
+    switch (op) {
+    case BLK_ZO_OPEN:
+        op_name = "BLKOPENZONE";
+        zo = BLKOPENZONE;
+        break;
+    case BLK_ZO_CLOSE:
+        op_name = "BLKCLOSEZONE";
+        zo = BLKCLOSEZONE;
+        break;
+    case BLK_ZO_FINISH:
+        op_name = "BLKFINISHZONE";
+        zo = BLKFINISHZONE;
+        break;
+    case BLK_ZO_RESET:
+        op_name = "BLKRESETZONE";
+        zo = BLKRESETZONE;
+        break;
+    default:
+        error_report("Unsupported zone op: 0x%x", op);
+        return -ENOTSUP;
+    }
+
+    acb = (RawPosixAIOData) {
+        .bs             = bs,
+        .aio_fildes     = s->fd,
+        .aio_type       = QEMU_AIO_ZONE_MGMT,
+        .aio_offset     = offset,
+        .aio_nbytes     = len,
+        .zone_mgmt  = {
+            .op = zo,
+        },
+    };
+
+    ret = raw_thread_pool_submit(bs, handle_aiocb_zone_mgmt, &acb);
+    if (ret != 0) {
+        ret = -errno;
+        error_report("ioctl %s failed %d", op_name, ret);
+    }
+
+    return ret;
+}
+#endif
+
 static coroutine_fn int
 raw_do_pdiscard(BlockDriverState *bs, int64_t offset, int64_t bytes,
                 bool blkdev)
@@ -3767,6 +4080,54 @@  static BlockDriver bdrv_host_device = {
 #endif
 };
 
+#if defined(CONFIG_BLKZONED)
+static BlockDriver bdrv_zoned_host_device = {
+    .format_name = "zoned_host_device",
+    .protocol_name = "zoned_host_device",
+    .instance_size = sizeof(BDRVRawState),
+    .bdrv_needs_filename = true,
+    .bdrv_probe_device  = hdev_probe_device,
+    .bdrv_file_open     = hdev_open,
+    .bdrv_close         = raw_close,
+    .bdrv_reopen_prepare = raw_reopen_prepare,
+    .bdrv_reopen_commit  = raw_reopen_commit,
+    .bdrv_reopen_abort   = raw_reopen_abort,
+    .bdrv_co_create_opts = bdrv_co_create_opts_simple,
+    .create_opts         = &bdrv_create_opts_simple,
+    .mutable_opts        = mutable_opts,
+    .bdrv_co_invalidate_cache = raw_co_invalidate_cache,
+    .bdrv_co_pwrite_zeroes = hdev_co_pwrite_zeroes,
+
+    .bdrv_co_preadv         = raw_co_preadv,
+    .bdrv_co_pwritev        = raw_co_pwritev,
+    .bdrv_co_flush_to_disk  = raw_co_flush_to_disk,
+    .bdrv_co_pdiscard       = hdev_co_pdiscard,
+    .bdrv_co_copy_range_from = raw_co_copy_range_from,
+    .bdrv_co_copy_range_to  = raw_co_copy_range_to,
+    .bdrv_refresh_limits = raw_refresh_limits,
+    .bdrv_io_plug = raw_aio_plug,
+    .bdrv_io_unplug = raw_aio_unplug,
+    .bdrv_attach_aio_context = raw_aio_attach_aio_context,
+
+    .bdrv_co_truncate       = raw_co_truncate,
+    .bdrv_getlength = raw_getlength,
+    .bdrv_get_info = raw_get_info,
+    .bdrv_get_allocated_file_size
+                        = raw_get_allocated_file_size,
+    .bdrv_get_specific_stats = hdev_get_specific_stats,
+    .bdrv_check_perm = raw_check_perm,
+    .bdrv_set_perm   = raw_set_perm,
+    .bdrv_abort_perm_update = raw_abort_perm_update,
+    .bdrv_probe_blocksizes = hdev_probe_zoned_blocksizes,
+    .bdrv_probe_geometry = hdev_probe_geometry,
+    .bdrv_co_ioctl = hdev_co_ioctl,
+
+    /* zone management operations */
+    .bdrv_co_zone_report = raw_co_zone_report,
+    .bdrv_co_zone_mgmt = raw_co_zone_mgmt,
+};
+#endif
+
 #if defined(__linux__) || defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
 static void cdrom_parse_filename(const char *filename, QDict *options,
                                  Error **errp)
@@ -4027,6 +4388,9 @@  static void bdrv_file_init(void)
     bdrv_register(&bdrv_file);
 #if defined(HAVE_HOST_BLOCK_DEVICE)
     bdrv_register(&bdrv_host_device);
+#if defined(CONFIG_BLKZONED)
+    bdrv_register(&bdrv_zoned_host_device);
+#endif
 #ifdef __linux__
     bdrv_register(&bdrv_host_cdrom);
 #endif
diff --git a/block/io.c b/block/io.c
index d87788dfbb..1e67265e99 100644
--- a/block/io.c
+++ b/block/io.c
@@ -3089,6 +3089,47 @@  out:
     return co.ret;
 }
 
+int coroutine_fn bdrv_co_zone_report(BlockDriverState *bs, int64_t offset,
+                        unsigned int *nr_zones,
+                        BlockZoneDescriptor *zones)
+{
+    BlockDriver *drv = bs->drv;
+    CoroutineIOCompletion co = {
+            .coroutine = qemu_coroutine_self(),
+    };
+    IO_CODE();
+
+    bdrv_inc_in_flight(bs);
+    if (!drv || !drv->bdrv_co_zone_report) {
+        co.ret = -ENOTSUP;
+        goto out;
+    }
+    co.ret = drv->bdrv_co_zone_report(bs, offset, nr_zones, zones);
+out:
+    bdrv_dec_in_flight(bs);
+    return co.ret;
+}
+
+int coroutine_fn bdrv_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op,
+        int64_t offset, int64_t len)
+{
+    BlockDriver *drv = bs->drv;
+    CoroutineIOCompletion co = {
+            .coroutine = qemu_coroutine_self(),
+    };
+    IO_CODE();
+
+    bdrv_inc_in_flight(bs);
+    if (!drv || !drv->bdrv_co_zone_mgmt) {
+        co.ret = -ENOTSUP;
+        goto out;
+    }
+    co.ret = drv->bdrv_co_zone_mgmt(bs, op, offset, len);
+out:
+    bdrv_dec_in_flight(bs);
+    return co.ret;
+}
+
 void *qemu_blockalign(BlockDriverState *bs, size_t size)
 {
     IO_CODE();
diff --git a/include/block/block-io.h b/include/block/block-io.h
index 2ed6214909..dae200a377 100644
--- a/include/block/block-io.h
+++ b/include/block/block-io.h
@@ -95,6 +95,13 @@  int coroutine_fn bdrv_co_flush(BlockDriverState *bs);
 
 int coroutine_fn bdrv_co_pdiscard(BdrvChild *child, int64_t offset,
                                   int64_t bytes);
+/* Report zone information of zone block device. */
+int coroutine_fn bdrv_co_zone_report(BlockDriverState *bs, int64_t offset,
+                                     unsigned int *nr_zones,
+                                     BlockZoneDescriptor *zones);
+int coroutine_fn bdrv_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op,
+                                   int64_t offset, int64_t len);
+
 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs);
 int bdrv_block_status(BlockDriverState *bs, int64_t offset,
                       int64_t bytes, int64_t *pnum, int64_t *map,
diff --git a/include/block/block_int-common.h b/include/block/block_int-common.h
index 4941c24488..dc6ee8006c 100644
--- a/include/block/block_int-common.h
+++ b/include/block/block_int-common.h
@@ -707,6 +707,12 @@  struct BlockDriver {
     int coroutine_fn GRAPH_RDLOCK_PTR (*bdrv_load_vmstate)(
         BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos);
 
+    int coroutine_fn (*bdrv_co_zone_report)(BlockDriverState *bs,
+            int64_t offset, unsigned int *nr_zones,
+            BlockZoneDescriptor *zones);
+    int coroutine_fn (*bdrv_co_zone_mgmt)(BlockDriverState *bs, BlockZoneOp op,
+            int64_t offset, int64_t len);
+
     /* removable device specific */
     bool (*bdrv_is_inserted)(BlockDriverState *bs);
     void (*bdrv_eject)(BlockDriverState *bs, bool eject_flag);
@@ -843,6 +849,21 @@  typedef struct BlockLimits {
 
     /* device zone model */
     BlockZoneModel zoned;
+
+    /* zone size expressed in bytes */
+    uint32_t zone_size;
+
+    /* total number of zones */
+    uint32_t nr_zones;
+
+    /* maximum sectors of a zone append write operation */
+    int64_t max_append_sectors;
+
+    /* maximum number of open zones */
+    int64_t max_open_zones;
+
+    /* maximum number of active zones */
+    int64_t max_active_zones;
 } BlockLimits;
 
 typedef struct BdrvOpBlocker BdrvOpBlocker;
diff --git a/include/block/raw-aio.h b/include/block/raw-aio.h
index 21fc10c4c9..877b2240b3 100644
--- a/include/block/raw-aio.h
+++ b/include/block/raw-aio.h
@@ -29,6 +29,8 @@ 
 #define QEMU_AIO_WRITE_ZEROES 0x0020
 #define QEMU_AIO_COPY_RANGE   0x0040
 #define QEMU_AIO_TRUNCATE     0x0080
+#define QEMU_AIO_ZONE_REPORT  0x0100
+#define QEMU_AIO_ZONE_MGMT    0x0200
 #define QEMU_AIO_TYPE_MASK \
         (QEMU_AIO_READ | \
          QEMU_AIO_WRITE | \
@@ -37,7 +39,9 @@ 
          QEMU_AIO_DISCARD | \
          QEMU_AIO_WRITE_ZEROES | \
          QEMU_AIO_COPY_RANGE | \
-         QEMU_AIO_TRUNCATE)
+         QEMU_AIO_TRUNCATE | \
+         QEMU_AIO_ZONE_REPORT | \
+         QEMU_AIO_ZONE_MGMT)
 
 /* AIO flags */
 #define QEMU_AIO_MISALIGNED   0x1000
diff --git a/include/sysemu/block-backend-io.h b/include/sysemu/block-backend-io.h
index 7ec6d978d4..cb2510dde7 100644
--- a/include/sysemu/block-backend-io.h
+++ b/include/sysemu/block-backend-io.h
@@ -45,6 +45,13 @@  BlockAIOCB *blk_aio_pwritev(BlockBackend *blk, int64_t offset,
                             BlockCompletionFunc *cb, void *opaque);
 BlockAIOCB *blk_aio_flush(BlockBackend *blk,
                           BlockCompletionFunc *cb, void *opaque);
+BlockAIOCB *blk_aio_zone_report(BlockBackend *blk, int64_t offset,
+                                unsigned int *nr_zones,
+                                BlockZoneDescriptor *zones,
+                                BlockCompletionFunc *cb, void *opaque);
+BlockAIOCB *blk_aio_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
+                              int64_t offset, int64_t len,
+                              BlockCompletionFunc *cb, void *opaque);
 BlockAIOCB *blk_aio_pdiscard(BlockBackend *blk, int64_t offset, int64_t bytes,
                              BlockCompletionFunc *cb, void *opaque);
 void blk_aio_cancel_async(BlockAIOCB *acb);
@@ -165,6 +172,17 @@  int co_wrapper_mixed blk_pwrite_zeroes(BlockBackend *blk, int64_t offset,
 int coroutine_fn blk_co_pwrite_zeroes(BlockBackend *blk, int64_t offset,
                                       int64_t bytes, BdrvRequestFlags flags);
 
+int coroutine_fn blk_co_zone_report(BlockBackend *blk, int64_t offset,
+                                    unsigned int *nr_zones,
+                                    BlockZoneDescriptor *zones);
+int co_wrapper_mixed blk_zone_report(BlockBackend *blk, int64_t offset,
+                                         unsigned int *nr_zones,
+                                         BlockZoneDescriptor *zones);
+int coroutine_fn blk_co_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
+                                  int64_t offset, int64_t len);
+int co_wrapper_mixed blk_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
+                                       int64_t offset, int64_t len);
+
 int co_wrapper_mixed blk_pdiscard(BlockBackend *blk, int64_t offset,
                                   int64_t bytes);
 int coroutine_fn blk_co_pdiscard(BlockBackend *blk, int64_t offset,
diff --git a/meson.build b/meson.build
index 5c6b5a1c75..a3336836f3 100644
--- a/meson.build
+++ b/meson.build
@@ -1948,6 +1948,7 @@  config_host_data.set('CONFIG_REPLICATION', get_option('replication').allowed())
 # has_header
 config_host_data.set('CONFIG_EPOLL', cc.has_header('sys/epoll.h'))
 config_host_data.set('CONFIG_LINUX_MAGIC_H', cc.has_header('linux/magic.h'))
+config_host_data.set('CONFIG_BLKZONED', cc.has_header('linux/blkzoned.h'))
 config_host_data.set('CONFIG_VALGRIND_H', cc.has_header('valgrind/valgrind.h'))
 config_host_data.set('HAVE_BTRFS_H', cc.has_header('linux/btrfs.h'))
 config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h'))
@@ -2042,6 +2043,9 @@  config_host_data.set('HAVE_SIGEV_NOTIFY_THREAD_ID',
 config_host_data.set('HAVE_STRUCT_STAT_ST_ATIM',
                      cc.has_member('struct stat', 'st_atim',
                                    prefix: '#include <sys/stat.h>'))
+config_host_data.set('HAVE_BLK_ZONE_REP_CAPACITY',
+                     cc.has_member('struct blk_zone', 'capacity',
+                                   prefix: '#include <linux/blkzoned.h>'))
 
 # has_type
 config_host_data.set('CONFIG_IOVEC',
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 95ac4fa634..d86ad0907b 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -2942,6 +2942,7 @@ 
 # @compress: Since 5.0
 # @copy-before-write: Since 6.2
 # @snapshot-access: Since 7.0
+# @zoned_host_device: Since 7.2
 #
 # Since: 2.9
 ##
@@ -2963,7 +2964,8 @@ 
             { 'name': 'virtio-blk-vfio-pci', 'if': 'CONFIG_BLKIO' },
             { 'name': 'virtio-blk-vhost-user', 'if': 'CONFIG_BLKIO' },
             { 'name': 'virtio-blk-vhost-vdpa', 'if': 'CONFIG_BLKIO' },
-            'vmdk', 'vpc', 'vvfat' ] }
+            'vmdk', 'vpc', 'vvfat',
+            { 'name': 'zoned_host_device', 'if': 'CONFIG_BLKZONED' } ] }
 
 ##
 # @BlockdevOptionsFile:
@@ -4416,7 +4418,9 @@ 
                       'if': 'CONFIG_BLKIO' },
       'vmdk':       'BlockdevOptionsGenericCOWFormat',
       'vpc':        'BlockdevOptionsGenericFormat',
-      'vvfat':      'BlockdevOptionsVVFAT'
+      'vvfat':      'BlockdevOptionsVVFAT',
+      'zoned_host_device': { 'type': 'BlockdevOptionsFile',
+                             'if': 'CONFIG_BLKZONED' }
   } }
 
 ##
diff --git a/qemu-io-cmds.c b/qemu-io-cmds.c
index 952dc940f1..3a3bad77c3 100644
--- a/qemu-io-cmds.c
+++ b/qemu-io-cmds.c
@@ -1712,6 +1712,150 @@  static const cmdinfo_t flush_cmd = {
     .oneline    = "flush all in-core file state to disk",
 };
 
+static inline int64_t tosector(int64_t bytes)
+{
+    return bytes >> BDRV_SECTOR_BITS;
+}
+
+static int zone_report_f(BlockBackend *blk, int argc, char **argv)
+{
+    int ret;
+    int64_t offset;
+    unsigned int nr_zones;
+
+    ++optind;
+    offset = cvtnum(argv[optind]);
+    ++optind;
+    nr_zones = cvtnum(argv[optind]);
+
+    g_autofree BlockZoneDescriptor *zones = NULL;
+    zones = g_new(BlockZoneDescriptor, nr_zones);
+    ret = blk_zone_report(blk, offset, &nr_zones, zones);
+    if (ret < 0) {
+        printf("zone report failed: %s\n", strerror(-ret));
+    } else {
+        for (int i = 0; i < nr_zones; ++i) {
+            printf("start: 0x%" PRIx64 ", len 0x%" PRIx64 ", "
+                   "cap"" 0x%" PRIx64 ", wptr 0x%" PRIx64 ", "
+                   "zcond:%u, [type: %u]\n",
+                    tosector(zones[i].start), tosector(zones[i].length),
+                    tosector(zones[i].cap), tosector(zones[i].wp),
+                    zones[i].state, zones[i].type);
+        }
+    }
+    return ret;
+}
+
+static const cmdinfo_t zone_report_cmd = {
+    .name = "zone_report",
+    .altname = "zrp",
+    .cfunc = zone_report_f,
+    .argmin = 2,
+    .argmax = 2,
+    .args = "offset number",
+    .oneline = "report zone information",
+};
+
+static int zone_open_f(BlockBackend *blk, int argc, char **argv)
+{
+    int ret;
+    int64_t offset, len;
+    ++optind;
+    offset = cvtnum(argv[optind]);
+    ++optind;
+    len = cvtnum(argv[optind]);
+    ret = blk_zone_mgmt(blk, BLK_ZO_OPEN, offset, len);
+    if (ret < 0) {
+        printf("zone open failed: %s\n", strerror(-ret));
+    }
+    return ret;
+}
+
+static const cmdinfo_t zone_open_cmd = {
+    .name = "zone_open",
+    .altname = "zo",
+    .cfunc = zone_open_f,
+    .argmin = 2,
+    .argmax = 2,
+    .args = "offset len",
+    .oneline = "explicit open a range of zones in zone block device",
+};
+
+static int zone_close_f(BlockBackend *blk, int argc, char **argv)
+{
+    int ret;
+    int64_t offset, len;
+    ++optind;
+    offset = cvtnum(argv[optind]);
+    ++optind;
+    len = cvtnum(argv[optind]);
+    ret = blk_zone_mgmt(blk, BLK_ZO_CLOSE, offset, len);
+    if (ret < 0) {
+        printf("zone close failed: %s\n", strerror(-ret));
+    }
+    return ret;
+}
+
+static const cmdinfo_t zone_close_cmd = {
+    .name = "zone_close",
+    .altname = "zc",
+    .cfunc = zone_close_f,
+    .argmin = 2,
+    .argmax = 2,
+    .args = "offset len",
+    .oneline = "close a range of zones in zone block device",
+};
+
+static int zone_finish_f(BlockBackend *blk, int argc, char **argv)
+{
+    int ret;
+    int64_t offset, len;
+    ++optind;
+    offset = cvtnum(argv[optind]);
+    ++optind;
+    len = cvtnum(argv[optind]);
+    ret = blk_zone_mgmt(blk, BLK_ZO_FINISH, offset, len);
+    if (ret < 0) {
+        printf("zone finish failed: %s\n", strerror(-ret));
+    }
+    return ret;
+}
+
+static const cmdinfo_t zone_finish_cmd = {
+    .name = "zone_finish",
+    .altname = "zf",
+    .cfunc = zone_finish_f,
+    .argmin = 2,
+    .argmax = 2,
+    .args = "offset len",
+    .oneline = "finish a range of zones in zone block device",
+};
+
+static int zone_reset_f(BlockBackend *blk, int argc, char **argv)
+{
+    int ret;
+    int64_t offset, len;
+    ++optind;
+    offset = cvtnum(argv[optind]);
+    ++optind;
+    len = cvtnum(argv[optind]);
+    ret = blk_zone_mgmt(blk, BLK_ZO_RESET, offset, len);
+    if (ret < 0) {
+        printf("zone reset failed: %s\n", strerror(-ret));
+    }
+    return ret;
+}
+
+static const cmdinfo_t zone_reset_cmd = {
+    .name = "zone_reset",
+    .altname = "zrs",
+    .cfunc = zone_reset_f,
+    .argmin = 2,
+    .argmax = 2,
+    .args = "offset len",
+    .oneline = "reset a zone write pointer in zone block device",
+};
+
 static int truncate_f(BlockBackend *blk, int argc, char **argv);
 static const cmdinfo_t truncate_cmd = {
     .name       = "truncate",
@@ -2504,6 +2648,11 @@  static void __attribute((constructor)) init_qemuio_commands(void)
     qemuio_add_command(&aio_write_cmd);
     qemuio_add_command(&aio_flush_cmd);
     qemuio_add_command(&flush_cmd);
+    qemuio_add_command(&zone_report_cmd);
+    qemuio_add_command(&zone_open_cmd);
+    qemuio_add_command(&zone_close_cmd);
+    qemuio_add_command(&zone_finish_cmd);
+    qemuio_add_command(&zone_reset_cmd);
     qemuio_add_command(&truncate_cmd);
     qemuio_add_command(&length_cmd);
     qemuio_add_command(&info_cmd);