diff mbox series

[1/2] dt-bindings: clock: SC7280: Add resets for LPASS audio clock controller

Message ID 1671618061-6329-2-git-send-email-quic_srivasam@quicinc.com (mailing list archive)
State Changes Requested, archived
Headers show
Series Add resets for ADSP based audio clock controller driver. | expand

Commit Message

Srinivasa Rao Mandadapu Dec. 21, 2022, 10:21 a.m. UTC
Add support for LPASS audio clock gating for RX/TX/SWA core bus clocks
for audioreach based SC7280 platforms.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
---
 Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Krzysztof Kozlowski Dec. 21, 2022, 10:42 a.m. UTC | #1
On 21/12/2022 11:21, Srinivasa Rao Mandadapu wrote:
> Add support for LPASS audio clock gating for RX/TX/SWA core bus clocks
> for audioreach based SC7280 platforms.

Use subject prefixes matching the subsystem (git log --oneline -- ...).
The final prefix should be "qcom,sc7280-lpasscc" and then the actual
subject should drop redundant pieces.

>  ...

Best regards,
Krzysztof
Srinivasa Rao Mandadapu Dec. 21, 2022, 12:22 p.m. UTC | #2
On 12/21/2022 4:12 PM, Krzysztof Kozlowski wrote:
Thanks for your time Krzyszto!!!
> On 21/12/2022 11:21, Srinivasa Rao Mandadapu wrote:
>> Add support for LPASS audio clock gating for RX/TX/SWA core bus clocks
>> for audioreach based SC7280 platforms.
> Use subject prefixes matching the subsystem (git log --oneline -- ...).
> The final prefix should be "qcom,sc7280-lpasscc" and then the actual
> subject should drop redundant pieces.

Sorry. I didn't understand much from your statement.

Do you mean subject should something like below?

  dt-bindings: clock: qcom: sc7280-lpasscc: Add resets for audio clock 
controller

>
>>   ...
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski Dec. 21, 2022, 12:24 p.m. UTC | #3
On 21/12/2022 13:22, Srinivasa Rao Mandadapu wrote:
> 
> On 12/21/2022 4:12 PM, Krzysztof Kozlowski wrote:
> Thanks for your time Krzyszto!!!
>> On 21/12/2022 11:21, Srinivasa Rao Mandadapu wrote:
>>> Add support for LPASS audio clock gating for RX/TX/SWA core bus clocks
>>> for audioreach based SC7280 platforms.
>> Use subject prefixes matching the subsystem (git log --oneline -- ...).
>> The final prefix should be "qcom,sc7280-lpasscc" and then the actual

                                ^^^^^^^ it's written here

>> subject should drop redundant pieces.
> 
> Sorry. I didn't understand much from your statement.
> 
> Do you mean subject should something like below?
> 
>   dt-bindings: clock: qcom: sc7280-lpasscc: Add resets for audio clock 
> controller

1. The last prefix should be "qcom,sc7280-lpasscc:".
2. And then drop "audio clock controller" because it is obvious, isn't it?

> 
>>
>>>   ...
>> Best regards,
>> Krzysztof
>>

Best regards,
Krzysztof
Srinivasa Rao Mandadapu Dec. 21, 2022, 12:27 p.m. UTC | #4
On 12/21/2022 5:54 PM, Krzysztof Kozlowski wrote:
> On 21/12/2022 13:22, Srinivasa Rao Mandadapu wrote:
>> On 12/21/2022 4:12 PM, Krzysztof Kozlowski wrote:
>> Thanks for your time Krzyszto!!!
>>> On 21/12/2022 11:21, Srinivasa Rao Mandadapu wrote:
>>>> Add support for LPASS audio clock gating for RX/TX/SWA core bus clocks
>>>> for audioreach based SC7280 platforms.
>>> Use subject prefixes matching the subsystem (git log --oneline -- ...).
>>> The final prefix should be "qcom,sc7280-lpasscc" and then the actual
>                                  ^^^^^^^ it's written here
>
>>> subject should drop redundant pieces.
>> Sorry. I didn't understand much from your statement.
>>
>> Do you mean subject should something like below?
>>
>>    dt-bindings: clock: qcom: sc7280-lpasscc: Add resets for audio clock
>> controller
> 1. The last prefix should be "qcom,sc7280-lpasscc:".
> 2. And then drop "audio clock controller" because it is obvious, isn't it?
Okay!. Thanks for clarifying. I will change accordingly. Actually I 
followed previous similar commits.
>
>>>>    ...
>>> Best regards,
>>> Krzysztof
>>>
> Best regards,
> Krzysztof
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
index 6151fde..b9be5f1 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
@@ -31,6 +31,9 @@  properties:
   '#clock-cells':
     const: 1
 
+  '#reset-cells':
+    const: 1
+
   reg:
     items:
       - description: LPASS qdsp6ss register
@@ -61,5 +64,6 @@  examples:
       clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
       clock-names = "iface";
       #clock-cells = <1>;
+      #reset-cells = <1>;
     };
 ...