diff mbox series

[v4,3/5] usb: gadget: udc: add Renesas RZ/N1 USBF controller support

Message ID 20221213133302.218955-4-herve.codina@bootlin.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series Add the Renesas USBF controller support | expand

Commit Message

Herve Codina Dec. 13, 2022, 1:33 p.m. UTC
Add support for the Renesas USBF controller.
This controller is an USB2.0 UDC controller available in the
Renesas r9a06g032 SoC (RZ/N1 family).

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 drivers/usb/gadget/udc/Kconfig        |   11 +
 drivers/usb/gadget/udc/Makefile       |    1 +
 drivers/usb/gadget/udc/renesas_usbf.c | 3420 +++++++++++++++++++++++++
 3 files changed, 3432 insertions(+)
 create mode 100644 drivers/usb/gadget/udc/renesas_usbf.c

Comments

Geert Uytterhoeven Dec. 21, 2022, 1:03 p.m. UTC | #1
Hi Hervé,

On Tue, Dec 13, 2022 at 2:33 PM Herve Codina <herve.codina@bootlin.com> wrote:
> Add support for the Renesas USBF controller.
> This controller is an USB2.0 UDC controller available in the
> Renesas r9a06g032 SoC (RZ/N1 family).
>
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>

Thanks for your patch!

> --- /dev/null
> +++ b/drivers/usb/gadget/udc/renesas_usbf.c

> +#ifdef DEBUG
> +#define TRACE(_fmt, ...) trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__)
> +#define USBF_TRACE_EP_MASK 0x0ffff /* All the 16 endpoints */
> +#define TRACEEP(_ep, _fmt, ...)                                             \
> +       do {                                                                \
> +               if ((1 << (_ep)->id) & USBF_TRACE_EP_MASK)                  \
> +                       trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__); \
> +       } while (0)
> +#else
> +#define TRACE(_fmt, ...) do { } while (0)
> +#define TRACEEP(_ep, _fmt, ...) do { } while (0)

Please use "no_printk(fmt, ##__VA_ARGS__)" instead of dummy loops,
to avoid bad callers going unnoticed if DEBUG is not defined.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Greg Kroah-Hartman Dec. 21, 2022, 1:07 p.m. UTC | #2
On Wed, Dec 21, 2022 at 02:03:43PM +0100, Geert Uytterhoeven wrote:
> Hi Hervé,
> 
> On Tue, Dec 13, 2022 at 2:33 PM Herve Codina <herve.codina@bootlin.com> wrote:
> > Add support for the Renesas USBF controller.
> > This controller is an USB2.0 UDC controller available in the
> > Renesas r9a06g032 SoC (RZ/N1 family).
> >
> > Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> 
> Thanks for your patch!
> 
> > --- /dev/null
> > +++ b/drivers/usb/gadget/udc/renesas_usbf.c
> 
> > +#ifdef DEBUG
> > +#define TRACE(_fmt, ...) trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__)
> > +#define USBF_TRACE_EP_MASK 0x0ffff /* All the 16 endpoints */
> > +#define TRACEEP(_ep, _fmt, ...)                                             \
> > +       do {                                                                \
> > +               if ((1 << (_ep)->id) & USBF_TRACE_EP_MASK)                  \
> > +                       trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__); \
> > +       } while (0)
> > +#else
> > +#define TRACE(_fmt, ...) do { } while (0)
> > +#define TRACEEP(_ep, _fmt, ...) do { } while (0)
> 
> Please use "no_printk(fmt, ##__VA_ARGS__)" instead of dummy loops,
> to avoid bad callers going unnoticed if DEBUG is not defined.

Even better, do NOT define custom debug/trace macros for a single
driver, just use the ones that the rest of the kernel uses instead
please.

thanks,

greg k-h
Herve Codina Dec. 22, 2022, 3:24 p.m. UTC | #3
Hi Geert, Greg,

On Wed, 21 Dec 2022 14:07:53 +0100
Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> On Wed, Dec 21, 2022 at 02:03:43PM +0100, Geert Uytterhoeven wrote:
> > Hi Hervé,
> > 
> > On Tue, Dec 13, 2022 at 2:33 PM Herve Codina <herve.codina@bootlin.com> wrote:  
> > > Add support for the Renesas USBF controller.
> > > This controller is an USB2.0 UDC controller available in the
> > > Renesas r9a06g032 SoC (RZ/N1 family).
> > >
> > > Signed-off-by: Herve Codina <herve.codina@bootlin.com>  
> > 
> > Thanks for your patch!
> >   
> > > --- /dev/null
> > > +++ b/drivers/usb/gadget/udc/renesas_usbf.c  
> >   
> > > +#ifdef DEBUG
> > > +#define TRACE(_fmt, ...) trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__)
> > > +#define USBF_TRACE_EP_MASK 0x0ffff /* All the 16 endpoints */
> > > +#define TRACEEP(_ep, _fmt, ...)                                             \
> > > +       do {                                                                \
> > > +               if ((1 << (_ep)->id) & USBF_TRACE_EP_MASK)                  \
> > > +                       trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__); \
> > > +       } while (0)
> > > +#else
> > > +#define TRACE(_fmt, ...) do { } while (0)
> > > +#define TRACEEP(_ep, _fmt, ...) do { } while (0)  
> > 
> > Please use "no_printk(fmt, ##__VA_ARGS__)" instead of dummy loops,
> > to avoid bad callers going unnoticed if DEBUG is not defined.  
> 
> Even better, do NOT define custom debug/trace macros for a single
> driver, just use the ones that the rest of the kernel uses instead
> please.
> 
> thanks,
> 
> greg k-h

I would like to keep some granularity in debug messages and
also keep the function name automatically added.
I propose 3 kinds of messages:
- general ones,
- specific Endpoint0 ones,
- other Endpoints ones.

So before doing any modification in the source code, what do you
think about:
    /*
     * Suggested tracers:
     * - no_printk:    Disable tracing
     * - trace_printk: Print to trace buffer
     */
    #define usbf_dbg(_fmt, ...) no_printk("%s: " _fmt, __func__, ##__VA_ARGS__)
    #define usbf_dbg_ep0(_fmt, ...) no_printk("%s: " _fmt, __func__, ##__VA_ARGS__)
    #define usbf_dbg_epn(_fmt, ...) no_printk("%s: " _fmt, __func__, ##__VA_ARGS__)

The code will use only these macros instead of the previously
defined TRACE and TRACEEP as follow:
- usbf_dbg() will be called instead of TRACE()
- usbf_dbg_ep0() will be called instead of TRACEEP() for Endpoint0
- usbf_dbg_epn() will be called instead of TRACEEP() for other Endpoints

Is that ok for you ?

Best regards,
Hervé
Greg Kroah-Hartman Dec. 22, 2022, 4:28 p.m. UTC | #4
On Thu, Dec 22, 2022 at 04:24:38PM +0100, Herve Codina wrote:
> Hi Geert, Greg,
> 
> On Wed, 21 Dec 2022 14:07:53 +0100
> Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> 
> > On Wed, Dec 21, 2022 at 02:03:43PM +0100, Geert Uytterhoeven wrote:
> > > Hi Hervé,
> > > 
> > > On Tue, Dec 13, 2022 at 2:33 PM Herve Codina <herve.codina@bootlin.com> wrote:  
> > > > Add support for the Renesas USBF controller.
> > > > This controller is an USB2.0 UDC controller available in the
> > > > Renesas r9a06g032 SoC (RZ/N1 family).
> > > >
> > > > Signed-off-by: Herve Codina <herve.codina@bootlin.com>  
> > > 
> > > Thanks for your patch!
> > >   
> > > > --- /dev/null
> > > > +++ b/drivers/usb/gadget/udc/renesas_usbf.c  
> > >   
> > > > +#ifdef DEBUG
> > > > +#define TRACE(_fmt, ...) trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__)
> > > > +#define USBF_TRACE_EP_MASK 0x0ffff /* All the 16 endpoints */
> > > > +#define TRACEEP(_ep, _fmt, ...)                                             \
> > > > +       do {                                                                \
> > > > +               if ((1 << (_ep)->id) & USBF_TRACE_EP_MASK)                  \
> > > > +                       trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__); \
> > > > +       } while (0)
> > > > +#else
> > > > +#define TRACE(_fmt, ...) do { } while (0)
> > > > +#define TRACEEP(_ep, _fmt, ...) do { } while (0)  
> > > 
> > > Please use "no_printk(fmt, ##__VA_ARGS__)" instead of dummy loops,
> > > to avoid bad callers going unnoticed if DEBUG is not defined.  
> > 
> > Even better, do NOT define custom debug/trace macros for a single
> > driver, just use the ones that the rest of the kernel uses instead
> > please.
> > 
> > thanks,
> > 
> > greg k-h
> 
> I would like to keep some granularity in debug messages and
> also keep the function name automatically added.
> I propose 3 kinds of messages:
> - general ones,
> - specific Endpoint0 ones,
> - other Endpoints ones.

All of those can work just fine using dev_dbg() today, no need to make
anything special for the driver.  You can turn those messages on/off
with no need to ever rebuild your driver, which is the key point.

> So before doing any modification in the source code, what do you
> think about:
>     /*
>      * Suggested tracers:
>      * - no_printk:    Disable tracing
>      * - trace_printk: Print to trace buffer
>      */
>     #define usbf_dbg(_fmt, ...) no_printk("%s: " _fmt, __func__, ##__VA_ARGS__)
>     #define usbf_dbg_ep0(_fmt, ...) no_printk("%s: " _fmt, __func__, ##__VA_ARGS__)
>     #define usbf_dbg_epn(_fmt, ...) no_printk("%s: " _fmt, __func__, ##__VA_ARGS__)

Nope, just use dev_dbg() only please.  It provides MUCH more
funcationality and a unified interface with the rest of the kernel.
Please do not attempt to "roll your own" version of debugging macros for
just a single driver.

thanks,

greg k-h
diff mbox series

Patch

diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 5756acb07b8d..f856d2c61603 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -204,6 +204,17 @@  config USB_RENESAS_USB3
 	   dynamically linked module called "renesas_usb3" and force all
 	   gadget drivers to also be dynamically linked.
 
+config USB_RENESAS_USBF
+	tristate 'Renesas USB Function controller'
+	depends on ARCH_RENESAS || COMPILE_TEST
+	help
+	   Renesas USB Function controller is a USB peripheral controller
+	   available on RZ/N1 Renesas SoCs.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "renesas_usbf" and force all
+	   gadget drivers to also be dynamically linked.
+
 config USB_PXA27X
 	tristate "PXA 27x"
 	depends on HAS_IOMEM
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index 12f9e4c9eb0c..99a2221c0f8b 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -27,6 +27,7 @@  obj-$(CONFIG_USB_TEGRA_XUDC)	+= tegra-xudc.o
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
 obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
 obj-$(CONFIG_USB_RENESAS_USB3)	+= renesas_usb3.o
+obj-$(CONFIG_USB_RENESAS_USBF)	+= renesas_usbf.o
 obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
 obj-$(CONFIG_USB_S3C_HSUDC)	+= s3c-hsudc.o
 obj-$(CONFIG_USB_LPC32XX)	+= lpc32xx_udc.o
diff --git a/drivers/usb/gadget/udc/renesas_usbf.c b/drivers/usb/gadget/udc/renesas_usbf.c
new file mode 100644
index 000000000000..8d3d36d0510d
--- /dev/null
+++ b/drivers/usb/gadget/udc/renesas_usbf.c
@@ -0,0 +1,3420 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas USBF USB Function driver
+ *
+ * Copyright 2022 Schneider Electric
+ * Author: Herve Codina <herve.codina@bootlin.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/kfifo.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/types.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/role.h>
+
+#ifdef DEBUG
+#define TRACE(_fmt, ...) trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__)
+#define USBF_TRACE_EP_MASK 0x0ffff /* All the 16 endpoints */
+#define TRACEEP(_ep, _fmt, ...)                                             \
+	do {                                                                \
+		if ((1 << (_ep)->id) & USBF_TRACE_EP_MASK)                  \
+			trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__); \
+	} while (0)
+#else
+#define TRACE(_fmt, ...) do { } while (0)
+#define TRACEEP(_ep, _fmt, ...) do { } while (0)
+#endif
+
+#define USBF_NUM_ENDPOINTS	16
+#define USBF_EP0_MAX_PCKT_SIZE	64
+
+/* EPC registers */
+#define USBF_REG_USB_CONTROL	0x000
+#define     USBF_USB_PUE2		BIT(2)
+#define     USBF_USB_CONNECTB		BIT(3)
+#define     USBF_USB_DEFAULT		BIT(4)
+#define     USBF_USB_CONF		BIT(5)
+#define     USBF_USB_SUSPEND		BIT(6)
+#define     USBF_USB_RSUM_IN		BIT(7)
+#define     USBF_USB_SOF_RCV		BIT(8)
+#define     USBF_USB_FORCEFS		BIT(9)
+#define     USBF_USB_INT_SEL		BIT(10)
+#define     USBF_USB_SOF_CLK_MODE	BIT(11)
+
+#define USBF_REG_USB_STATUS	0x004
+#define     USBF_USB_RSUM_OUT		BIT(1)
+#define     USBF_USB_SPND_OUT		BIT(2)
+#define     USBF_USB_USB_RST		BIT(3)
+#define     USBF_USB_DEFAULT_ST		BIT(4)
+#define     USBF_USB_CONF_ST		BIT(5)
+#define     USBF_USB_SPEED_MODE		BIT(6)
+#define     USBF_USB_SOF_DELAY_STATUS	BIT(31)
+
+#define USBF_REG_USB_ADDRESS	0x008
+#define     USBF_USB_SOF_STATUS		BIT(15)
+#define     USBF_USB_SET_USB_ADDR(_a)	((_a) << 16)
+#define     USBF_USB_GET_FRAME(_r)	((_r) & 0x7FF)
+
+#define USBF_REG_SETUP_DATA0	0x018
+#define USBF_REG_SETUP_DATA1	0x01C
+#define USBF_REG_USB_INT_STA	0x020
+#define     USBF_USB_RSUM_INT		BIT(1)
+#define     USBF_USB_SPND_INT		BIT(2)
+#define     USBF_USB_USB_RST_INT	BIT(3)
+#define     USBF_USB_SOF_INT		BIT(4)
+#define     USBF_USB_SOF_ERROR_INT	BIT(5)
+#define     USBF_USB_SPEED_MODE_INT	BIT(6)
+#define     USBF_USB_EPN_INT(_n)	(BIT(8) << (_n)) /* n=0..15 */
+
+#define USBF_REG_USB_INT_ENA	0x024
+#define     USBF_USB_RSUM_EN		BIT(1)
+#define     USBF_USB_SPND_EN		BIT(2)
+#define     USBF_USB_USB_RST_EN		BIT(3)
+#define     USBF_USB_SOF_EN		BIT(4)
+#define     USBF_USB_SOF_ERROR_EN	BIT(5)
+#define     USBF_USB_SPEED_MODE_EN	BIT(6)
+#define     USBF_USB_EPN_EN(_n)		(BIT(8) << (_n)) /* n=0..15 */
+
+#define USBF_BASE_EP0		0x028
+/* EP0 registers offsets from Base + USBF_BASE_EP0 (EP0 regs area) */
+#define     USBF_REG_EP0_CONTROL	0x00
+#define         USBF_EP0_ONAK			BIT(0)
+#define         USBF_EP0_INAK			BIT(1)
+#define         USBF_EP0_STL			BIT(2)
+#define         USBF_EP0_PERR_NAK_CLR		BIT(3)
+#define         USBF_EP0_INAK_EN		BIT(4)
+#define         USBF_EP0_DW_MASK		(0x3 << 5)
+#define         USBF_EP0_DW(_s)			((_s) << 5)
+#define         USBF_EP0_DEND			BIT(7)
+#define         USBF_EP0_BCLR			BIT(8)
+#define         USBF_EP0_PIDCLR			BIT(9)
+#define         USBF_EP0_AUTO			BIT(16)
+#define         USBF_EP0_OVERSEL		BIT(17)
+#define         USBF_EP0_STGSEL			BIT(18)
+
+#define     USBF_REG_EP0_STATUS		0x04
+#define         USBF_EP0_SETUP_INT		BIT(0)
+#define         USBF_EP0_STG_START_INT		BIT(1)
+#define         USBF_EP0_STG_END_INT		BIT(2)
+#define         USBF_EP0_STALL_INT		BIT(3)
+#define         USBF_EP0_IN_INT			BIT(4)
+#define         USBF_EP0_OUT_INT		BIT(5)
+#define         USBF_EP0_OUT_OR_INT		BIT(6)
+#define         USBF_EP0_OUT_NULL_INT		BIT(7)
+#define         USBF_EP0_IN_EMPTY		BIT(8)
+#define         USBF_EP0_IN_FULL		BIT(9)
+#define         USBF_EP0_IN_DATA		BIT(10)
+#define         USBF_EP0_IN_NAK_INT		BIT(11)
+#define         USBF_EP0_OUT_EMPTY		BIT(12)
+#define         USBF_EP0_OUT_FULL		BIT(13)
+#define         USBF_EP0_OUT_NULL		BIT(14)
+#define         USBF_EP0_OUT_NAK_INT		BIT(15)
+#define         USBF_EP0_PERR_NAK_INT		BIT(16)
+#define         USBF_EP0_PERR_NAK		BIT(17)
+#define         USBF_EP0_PID			BIT(18)
+
+#define     USBF_REG_EP0_INT_ENA	0x08
+#define         USBF_EP0_SETUP_EN		BIT(0)
+#define         USBF_EP0_STG_START_EN		BIT(1)
+#define         USBF_EP0_STG_END_EN		BIT(2)
+#define         USBF_EP0_STALL_EN		BIT(3)
+#define         USBF_EP0_IN_EN			BIT(4)
+#define         USBF_EP0_OUT_EN			BIT(5)
+#define         USBF_EP0_OUT_OR_EN		BIT(6)
+#define         USBF_EP0_OUT_NULL_EN		BIT(7)
+#define         USBF_EP0_IN_NAK_EN		BIT(11)
+#define         USBF_EP0_OUT_NAK_EN		BIT(15)
+#define         USBF_EP0_PERR_NAK_EN		BIT(16)
+
+#define     USBF_REG_EP0_LENGTH		0x0C
+#define         USBF_EP0_LDATA			(0x7FF << 0)
+#define     USBF_REG_EP0_READ		0x10
+#define     USBF_REG_EP0_WRITE		0x14
+
+#define USBF_BASE_EPN(_n)	(0x040 + (_n) * 0x020)
+/* EPn registers offsets from Base + USBF_BASE_EPN(n-1). n=1..15 */
+#define     USBF_REG_EPN_CONTROL	0x000
+#define         USBF_EPN_ONAK			BIT(0)
+#define         USBF_EPN_OSTL			BIT(2)
+#define         USBF_EPN_ISTL			BIT(3)
+#define         USBF_EPN_OSTL_EN		BIT(4)
+#define         USBF_EPN_DW_MASK		(0x3 << 5)
+#define         USBF_EPN_DW(_s)			((_s) << 5)
+#define         USBF_EPN_DEND			BIT(7)
+#define         USBF_EPN_CBCLR			BIT(8)
+#define         USBF_EPN_BCLR			BIT(9)
+#define         USBF_EPN_OPIDCLR		BIT(10)
+#define         USBF_EPN_IPIDCLR		BIT(11)
+#define         USBF_EPN_AUTO			BIT(16)
+#define         USBF_EPN_OVERSEL		BIT(17)
+#define         USBF_EPN_MODE_MASK		(0x3 << 24)
+#define         USBF_EPN_MODE_BULK		(0x0 << 24)
+#define         USBF_EPN_MODE_INTR		(0x1 << 24)
+#define         USBF_EPN_MODE_ISO		(0x2 << 24)
+#define         USBF_EPN_DIR0			BIT(26)
+#define         USBF_EPN_BUF_TYPE_DOUBLE	BIT(30)
+#define         USBF_EPN_EN			BIT(31)
+
+#define     USBF_REG_EPN_STATUS		0x004
+#define         USBF_EPN_IN_EMPTY		BIT(0)
+#define         USBF_EPN_IN_FULL		BIT(1)
+#define         USBF_EPN_IN_DATA		BIT(2)
+#define         USBF_EPN_IN_INT			BIT(3)
+#define         USBF_EPN_IN_STALL_INT		BIT(4)
+#define         USBF_EPN_IN_NAK_ERR_INT		BIT(5)
+#define         USBF_EPN_IN_END_INT		BIT(7)
+#define         USBF_EPN_IPID			BIT(10)
+#define         USBF_EPN_OUT_EMPTY		BIT(16)
+#define         USBF_EPN_OUT_FULL		BIT(17)
+#define         USBF_EPN_OUT_NULL_INT		BIT(18)
+#define         USBF_EPN_OUT_INT		BIT(19)
+#define         USBF_EPN_OUT_STALL_INT		BIT(20)
+#define         USBF_EPN_OUT_NAK_ERR_INT	BIT(21)
+#define         USBF_EPN_OUT_OR_INT		BIT(22)
+#define         USBF_EPN_OUT_END_INT		BIT(23)
+#define         USBF_EPN_ISO_CRC		BIT(24)
+#define         USBF_EPN_ISO_OR			BIT(26)
+#define         USBF_EPN_OUT_NOTKN		BIT(27)
+#define         USBF_EPN_ISO_OPID		BIT(28)
+#define         USBF_EPN_ISO_PIDERR		BIT(29)
+
+#define     USBF_REG_EPN_INT_ENA	0x008
+#define         USBF_EPN_IN_EN			BIT(3)
+#define         USBF_EPN_IN_STALL_EN		BIT(4)
+#define         USBF_EPN_IN_NAK_ERR_EN		BIT(5)
+#define         USBF_EPN_IN_END_EN		BIT(7)
+#define         USBF_EPN_OUT_NULL_EN		BIT(18)
+#define         USBF_EPN_OUT_EN			BIT(19)
+#define         USBF_EPN_OUT_STALL_EN		BIT(20)
+#define         USBF_EPN_OUT_NAK_ERR_EN		BIT(21)
+#define         USBF_EPN_OUT_OR_EN		BIT(22)
+#define         USBF_EPN_OUT_END_EN		BIT(23)
+
+#define     USBF_REG_EPN_DMA_CTRL	0x00C
+#define         USBF_EPN_DMAMODE0		BIT(0)
+#define         USBF_EPN_DMA_EN			BIT(4)
+#define         USBF_EPN_STOP_SET		BIT(8)
+#define         USBF_EPN_BURST_SET		BIT(9)
+#define         USBF_EPN_DEND_SET		BIT(10)
+#define         USBF_EPN_STOP_MODE		BIT(11)
+
+#define     USBF_REG_EPN_PCKT_ADRS	0x010
+#define         USBF_EPN_MPKT(_l)		((_l) << 0)
+#define         USBF_EPN_BASEAD(_a)		((_a) << 16)
+
+#define     USBF_REG_EPN_LEN_DCNT	0x014
+#define         USBF_EPN_GET_LDATA(_r)		((_r) & 0x7FF)
+#define         USBF_EPN_SET_DMACNT(_c)		((_c) << 16)
+#define         USBF_EPN_GET_DMACNT(_r)		(((_r) >> 16) & 0x1ff)
+
+#define     USBF_REG_EPN_READ		0x018
+#define     USBF_REG_EPN_WRITE		0x01C
+
+/* AHB-EPC Bridge registers */
+#define USBF_REG_AHBSCTR	0x1000
+#define USBF_REG_AHBMCTR	0x1004
+#define     USBF_SYS_WBURST_TYPE	BIT(2)
+#define     USBF_SYS_ARBITER_CTR	BIT(31)
+
+#define USBF_REG_AHBBINT	0x1008
+#define     USBF_SYS_ERR_MASTER		 (0x0F << 0)
+#define     USBF_SYS_SBUS_ERRINT0	 BIT(4)
+#define     USBF_SYS_SBUS_ERRINT1	 BIT(5)
+#define     USBF_SYS_MBUS_ERRINT	 BIT(6)
+#define     USBF_SYS_VBUS_INT		 BIT(13)
+#define     USBF_SYS_DMA_ENDINT_EPN(_n)	 (BIT(16) << (_n)) /* _n=1..15 */
+
+#define USBF_REG_AHBBINTEN	0x100C
+#define     USBF_SYS_SBUS_ERRINT0EN	  BIT(4)
+#define     USBF_SYS_SBUS_ERRINT1EN	  BIT(5)
+#define     USBF_SYS_MBUS_ERRINTEN	  BIT(6)
+#define     USBF_SYS_VBUS_INTEN		  BIT(13)
+#define     USBF_SYS_DMA_ENDINTEN_EPN(_n) (BIT(16) << (_n)) /* _n=1..15 */
+
+#define USBF_REG_EPCTR		0x1010
+#define     USBF_SYS_EPC_RST		BIT(0)
+#define     USBF_SYS_PLL_RST		BIT(2)
+#define     USBF_SYS_PLL_LOCK		BIT(4)
+#define     USBF_SYS_PLL_RESUME		BIT(5)
+#define     USBF_SYS_VBUS_LEVEL		BIT(8)
+#define     USBF_SYS_DIRPD		BIT(12)
+
+#define USBF_REG_USBSSVER	0x1020
+#define USBF_REG_USBSSCONF	0x1024
+#define    USBF_SYS_DMA_AVAILABLE(_n)	(BIT(0) << (_n)) /* _n=0..15 */
+#define    USBF_SYS_EP_AVAILABLE(_n)	(BIT(16) << (_n)) /* _n=0..15 */
+
+#define USBF_BASE_DMA_EPN(_n)	(0x1110 + (_n) * 0x010)
+/* EPn DMA registers offsets from Base USBF_BASE_DMA_EPN(n-1). n=1..15*/
+#define     USBF_REG_DMA_EPN_DCR1	0x00
+#define         USBF_SYS_EPN_REQEN		BIT(0)
+#define         USBF_SYS_EPN_DIR0		BIT(1)
+#define         USBF_SYS_EPN_SET_DMACNT(_c)	((_c) << 16)
+#define         USBF_SYS_EPN_GET_DMACNT(_r)	(((_r) >> 16) & 0x0FF)
+
+#define     USBF_REG_DMA_EPN_DCR2	0x04
+#define         USBF_SYS_EPN_MPKT(_s)		((_s) << 0)
+#define         USBF_SYS_EPN_LMPKT(_l)		((_l) << 16)
+
+#define     USBF_REG_DMA_EPN_TADR	0x08
+
+/* USB request */
+struct usbf_req {
+	struct usb_request	req;
+	struct list_head	queue;
+	unsigned int		is_zero_sent : 1;
+	unsigned int		is_mapped : 1;
+	enum {
+		USBF_XFER_START,
+		USBF_XFER_WAIT_DMA,
+		USBF_XFER_SEND_NULL,
+		USBF_XFER_WAIT_END,
+		USBF_XFER_WAIT_DMA_SHORT,
+		USBF_XFER_WAIT_BRIDGE,
+	}			xfer_step;
+	size_t			dma_size;
+};
+
+/* USB Endpoint */
+struct usbf_ep {
+	struct usb_ep		ep;
+	char			name[32];
+	struct list_head	queue;
+	unsigned int		is_processing : 1;
+	unsigned int		is_in : 1;
+	struct			usbf_udc *udc;
+	void __iomem		*regs;
+	void __iomem		*dma_regs;
+	unsigned int		id : 8;
+	unsigned int		disabled : 1;
+	unsigned int		is_wedged : 1;
+	unsigned int		delayed_status : 1;
+	u32			status;
+	void			(*bridge_on_dma_end)(struct usbf_ep *ep);
+};
+
+enum usbf_ep0state {
+	EP0_IDLE,
+	EP0_IN_DATA_PHASE,
+	EP0_OUT_DATA_PHASE,
+	EP0_OUT_STATUS_START_PHASE,
+	EP0_OUT_STATUS_PHASE,
+	EP0_OUT_STATUS_END_PHASE,
+	EP0_IN_STATUS_START_PHASE,
+	EP0_IN_STATUS_PHASE,
+	EP0_IN_STATUS_END_PHASE,
+};
+
+struct usbf_udc {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	struct device			*dev;
+	void __iomem			*regs;
+	spinlock_t			lock;
+	bool				is_remote_wakeup;
+	bool				is_usb_suspended;
+	struct usbf_ep			ep[USBF_NUM_ENDPOINTS];
+	/* for EP0 control messages */
+	enum usbf_ep0state		ep0state;
+	struct usbf_req			setup_reply;
+	u8				ep0_buf[USBF_EP0_MAX_PCKT_SIZE];
+};
+
+struct usbf_ep_info {
+	const char		*name;
+	struct usb_ep_caps	caps;
+	u16			base_addr;
+	unsigned int		is_double : 1;
+	u16			maxpacket_limit;
+};
+
+#define USBF_SINGLE_BUFFER 0
+#define USBF_DOUBLE_BUFFER 1
+#define USBF_EP_INFO(_name, _caps, _base_addr, _is_double, _maxpacket_limit)  \
+	{                                                                     \
+		.name            = _name,                                     \
+		.caps            = _caps,                                     \
+		.base_addr       = _base_addr,                                \
+		.is_double       = _is_double,                                \
+		.maxpacket_limit = _maxpacket_limit,                          \
+	}
+
+/* This table is computed from the recommended values provided in the SOC
+ * datasheet. The buffer type (single/double) and the endpoint type cannot
+ * be changed. The mapping in internal RAM (base_addr and number of words)
+ * for each endpoints depends on the max packet size and the buffer type.
+ */
+static const struct usbf_ep_info usbf_ep_info[USBF_NUM_ENDPOINTS] = {
+	/* ep0: buf @0x0000 64 bytes, fixed 32 words */
+	[0] = USBF_EP_INFO("ep0-ctrl",
+			   USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL,
+				       USB_EP_CAPS_DIR_ALL),
+			   0x0000, USBF_SINGLE_BUFFER, USBF_EP0_MAX_PCKT_SIZE),
+	/* ep1: buf @0x0020, 2 buffers 512 bytes -> (512 * 2 / 4) words */
+	[1] = USBF_EP_INFO("ep1-bulk",
+			   USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+				       USB_EP_CAPS_DIR_ALL),
+			   0x0020, USBF_DOUBLE_BUFFER, 512),
+	/* ep2: buf @0x0120, 2 buffers 512 bytes -> (512 * 2 / 4) words */
+	[2] = USBF_EP_INFO("ep2-bulk",
+			   USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+				       USB_EP_CAPS_DIR_ALL),
+			   0x0120, USBF_DOUBLE_BUFFER, 512),
+	/* ep3: buf @0x0220, 1 buffer 512 bytes -> (512 * 2 / 4) words */
+	[3] = USBF_EP_INFO("ep3-bulk",
+			   USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+				       USB_EP_CAPS_DIR_ALL),
+			   0x0220, USBF_SINGLE_BUFFER, 512),
+	/* ep4: buf @0x02A0, 1 buffer 512 bytes -> (512 * 1 / 4) words */
+	[4] = USBF_EP_INFO("ep4-bulk",
+			   USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+				       USB_EP_CAPS_DIR_ALL),
+			   0x02A0, USBF_SINGLE_BUFFER, 512),
+	/* ep5: buf @0x0320, 1 buffer 512 bytes -> (512 * 2 / 4) words */
+	[5] = USBF_EP_INFO("ep5-bulk",
+			   USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+				       USB_EP_CAPS_DIR_ALL),
+			   0x0320, USBF_SINGLE_BUFFER, 512),
+	/* ep6: buf @0x03A0, 1 buffer 1024 bytes -> (1024 * 1 / 4) words */
+	[6] = USBF_EP_INFO("ep6-int",
+			   USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+				       USB_EP_CAPS_DIR_ALL),
+			   0x03A0, USBF_SINGLE_BUFFER, 1024),
+	/* ep7: buf @0x04A0, 1 buffer 1024 bytes -> (1024 * 1 / 4) words */
+	[7] = USBF_EP_INFO("ep7-int",
+			   USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+				       USB_EP_CAPS_DIR_ALL),
+			   0x04A0, USBF_SINGLE_BUFFER, 1024),
+	/* ep8: buf @0x0520, 1 buffer 1024 bytes -> (1024 * 1 / 4) words */
+	[8] = USBF_EP_INFO("ep8-int",
+			   USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+				       USB_EP_CAPS_DIR_ALL),
+			   0x0520, USBF_SINGLE_BUFFER, 1024),
+	/* ep9: buf @0x0620, 1 buffer 1024 bytes -> (1024 * 1 / 4) words */
+	[9] = USBF_EP_INFO("ep9-int",
+			   USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+				       USB_EP_CAPS_DIR_ALL),
+			   0x0620, USBF_SINGLE_BUFFER, 1024),
+	/* ep10: buf @0x0720, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */
+	[10] = USBF_EP_INFO("ep10-iso",
+			    USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
+			    0x0720, USBF_DOUBLE_BUFFER, 1024),
+	/* ep11: buf @0x0920, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */
+	[11] = USBF_EP_INFO("ep11-iso",
+			    USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
+			    0x0920, USBF_DOUBLE_BUFFER, 1024),
+	/* ep12: buf @0x0B20, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */
+	[12] = USBF_EP_INFO("ep12-iso",
+			    USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
+			    0x0B20, USBF_DOUBLE_BUFFER, 1024),
+	/* ep13: buf @0x0D20, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */
+	[13] = USBF_EP_INFO("ep13-iso",
+			    USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
+			    0x0D20, USBF_DOUBLE_BUFFER, 1024),
+	/* ep14: buf @0x0F20, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */
+	[14] = USBF_EP_INFO("ep14-iso",
+			    USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
+			    0x0F20, USBF_DOUBLE_BUFFER, 1024),
+	/* ep15: buf @0x1120, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */
+	[15] = USBF_EP_INFO("ep15-iso",
+			    USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
+			    0x1120, USBF_DOUBLE_BUFFER, 1024),
+};
+
+static inline u32 usbf_reg_readl(struct usbf_udc *udc, uint offset)
+{
+	return readl(udc->regs + offset);
+}
+
+static inline void usbf_reg_writel(struct usbf_udc *udc, uint offset, u32 val)
+{
+	writel(val, udc->regs + offset);
+}
+
+static inline void usbf_reg_bitset(struct usbf_udc *udc, uint offset, u32 set)
+{
+	u32 tmp;
+
+	tmp = usbf_reg_readl(udc, offset);
+	tmp |= set;
+	usbf_reg_writel(udc, offset, tmp);
+}
+
+static inline void usbf_reg_bitclr(struct usbf_udc *udc, uint offset, u32 clr)
+{
+	u32 tmp;
+
+	tmp = usbf_reg_readl(udc, offset);
+	tmp &= ~clr;
+	usbf_reg_writel(udc, offset, tmp);
+}
+
+static inline void usbf_reg_clrset(struct usbf_udc *udc, uint offset,
+				   u32 clr, u32 set)
+{
+	u32 tmp;
+
+	tmp = usbf_reg_readl(udc, offset);
+	tmp &= ~clr;
+	tmp |= set;
+	usbf_reg_writel(udc, offset, tmp);
+}
+
+static inline u32 usbf_ep_reg_readl(struct usbf_ep *ep, uint offset)
+{
+	return readl(ep->regs + offset);
+}
+
+static inline void usbf_ep_reg_read_rep(struct usbf_ep *ep, uint offset,
+				       void *dst, uint count)
+{
+	readsl(ep->regs + offset, dst, count);
+}
+
+static inline void usbf_ep_reg_writel(struct usbf_ep *ep, uint offset, u32 val)
+{
+	writel(val, ep->regs + offset);
+}
+
+static inline void usbf_ep_reg_write_rep(struct usbf_ep *ep, uint offset,
+					 const void *src, uint count)
+{
+	writesl(ep->regs + offset, src, count);
+}
+
+static inline void usbf_ep_reg_bitset(struct usbf_ep *ep, uint offset, u32 set)
+{
+	u32 tmp;
+
+	tmp = usbf_ep_reg_readl(ep, offset);
+	tmp |= set;
+	usbf_ep_reg_writel(ep, offset, tmp);
+}
+
+static inline void usbf_ep_reg_bitclr(struct usbf_ep *ep, uint offset, u32 clr)
+{
+	u32 tmp;
+
+	tmp = usbf_ep_reg_readl(ep, offset);
+	tmp &= ~clr;
+	usbf_ep_reg_writel(ep, offset, tmp);
+}
+
+static inline void usbf_ep_reg_clrset(struct usbf_ep *ep, uint offset,
+				      u32 clr, u32 set)
+{
+	u32 tmp;
+
+	tmp = usbf_ep_reg_readl(ep, offset);
+	tmp &= ~clr;
+	tmp |= set;
+	usbf_ep_reg_writel(ep, offset, tmp);
+}
+
+static inline u32 usbf_ep_dma_reg_readl(struct usbf_ep *ep, uint offset)
+{
+	return readl(ep->dma_regs + offset);
+}
+
+static inline void usbf_ep_dma_reg_writel(struct usbf_ep *ep, uint offset,
+					  u32 val)
+{
+	writel(val, ep->dma_regs + offset);
+}
+
+static inline void usbf_ep_dma_reg_bitset(struct usbf_ep *ep, uint offset,
+					  u32 set)
+{
+	u32 tmp;
+
+	tmp = usbf_ep_dma_reg_readl(ep, offset);
+	tmp |= set;
+	usbf_ep_dma_reg_writel(ep, offset, tmp);
+}
+
+static inline void usbf_ep_dma_reg_bitclr(struct usbf_ep *ep, uint offset,
+					  u32 clr)
+{
+	u32 tmp;
+
+	tmp = usbf_ep_dma_reg_readl(ep, offset);
+	tmp &= ~clr;
+	usbf_ep_dma_reg_writel(ep, offset, tmp);
+}
+
+static inline void usbf_ep_dma_reg_clrset(struct usbf_ep *ep, uint offset,
+					  u32 clr, u32 set)
+{
+	u32 tmp;
+
+	tmp = usbf_ep_dma_reg_readl(ep, offset);
+	tmp &= ~clr;
+	tmp |= set;
+	usbf_ep_dma_reg_writel(ep, offset, tmp);
+}
+
+static void usbf_ep0_send_null(struct usbf_ep *ep0, bool is_data1)
+{
+	u32 set;
+
+	set = USBF_EP0_DEND;
+	if (is_data1)
+		set |= USBF_EP0_PIDCLR;
+
+	usbf_ep_reg_bitset(ep0, USBF_REG_EP0_CONTROL, set);
+}
+
+static int usbf_ep0_pio_in(struct usbf_ep *ep0, struct usbf_req *req)
+{
+	unsigned int left;
+	unsigned int nb;
+	const void *buf;
+	u32 ctrl;
+	u32 last;
+
+	left = req->req.length - req->req.actual;
+
+	if (left == 0) {
+		if (!req->is_zero_sent) {
+			if (req->req.length == 0) {
+				TRACEEP(ep0, "send null\n");
+				usbf_ep0_send_null(ep0, false);
+				req->is_zero_sent = 1;
+				return -EINPROGRESS;
+			}
+			if ((req->req.actual % ep0->ep.maxpacket) == 0) {
+				if (req->req.zero) {
+					TRACEEP(ep0, "send null\n");
+					usbf_ep0_send_null(ep0, false);
+					req->is_zero_sent = 1;
+					return -EINPROGRESS;
+				}
+			}
+		}
+		return 0;
+	}
+
+	if (left > ep0->ep.maxpacket)
+		left = ep0->ep.maxpacket;
+
+	buf = req->req.buf;
+	buf += req->req.actual;
+
+	nb = left / sizeof(u32);
+	if (nb) {
+		usbf_ep_reg_write_rep(ep0, USBF_REG_EP0_WRITE, buf, nb);
+		buf += (nb * sizeof(u32));
+		req->req.actual += (nb * sizeof(u32));
+		left -= (nb * sizeof(u32));
+	}
+	ctrl = usbf_ep_reg_readl(ep0, USBF_REG_EP0_CONTROL);
+	ctrl &= ~USBF_EP0_DW_MASK;
+	if (left) {
+		memcpy(&last, buf, left);
+		usbf_ep_reg_writel(ep0, USBF_REG_EP0_WRITE, last);
+		ctrl |= USBF_EP0_DW(left);
+		req->req.actual += left;
+	}
+	usbf_ep_reg_writel(ep0, USBF_REG_EP0_CONTROL, ctrl | USBF_EP0_DEND);
+
+	TRACEEP(ep0, "send %u/%u\n", req->req.actual, req->req.length);
+
+	return -EINPROGRESS;
+}
+
+static int usbf_ep0_pio_out(struct usbf_ep *ep0, struct usbf_req *req)
+{
+	int req_status = 0;
+	unsigned int count;
+	unsigned int recv;
+	unsigned int left;
+	unsigned int nb;
+	void *buf;
+	u32 last;
+
+	if (ep0->status & USBF_EP0_OUT_INT) {
+		recv = usbf_ep_reg_readl(ep0, USBF_REG_EP0_LENGTH) & USBF_EP0_LDATA;
+		count = recv;
+
+		buf = req->req.buf;
+		buf += req->req.actual;
+
+		left = req->req.length - req->req.actual;
+
+		TRACEEP(ep0, "recv %u, left %u\n", count, left);
+
+		if (left > ep0->ep.maxpacket)
+			left = ep0->ep.maxpacket;
+
+		if (count > left) {
+			req_status = -EOVERFLOW;
+			count = left;
+		}
+
+		if (count) {
+			nb = count / sizeof(u32);
+			if (nb) {
+				usbf_ep_reg_read_rep(ep0, USBF_REG_EP0_READ,
+					buf, nb);
+				buf += (nb * sizeof(u32));
+				req->req.actual += (nb * sizeof(u32));
+				count -= (nb * sizeof(u32));
+			}
+			if (count) {
+				last = usbf_ep_reg_readl(ep0, USBF_REG_EP0_READ);
+				memcpy(buf, &last, count);
+				req->req.actual += count;
+			}
+		}
+		TRACEEP(ep0, "recv %u/%u\n", req->req.actual, req->req.length);
+
+		if (req_status) {
+			TRACEEP(ep0, "req.status=%d\n", req_status);
+			req->req.status = req_status;
+			return 0;
+		}
+
+		if (recv < ep0->ep.maxpacket) {
+			TRACEEP(ep0, "short packet\n");
+			/* This is a short packet -> It is the end */
+			req->req.status = 0;
+			return 0;
+		}
+
+		/* The Data stage of a control transfer from an endpoint to the
+		 * host is complete when the endpoint does one of the following:
+		 * - Has transferred exactly the expected amount of data
+		 * - Transfers a packet with a payload size less than
+		 *   wMaxPacketSize or transfers a zero-length packet
+		 */
+		if (req->req.actual == req->req.length) {
+			req->req.status = 0;
+			return 0;
+		}
+	}
+
+	if (ep0->status & USBF_EP0_OUT_NULL_INT) {
+		/* NULL packet received */
+		TRACEEP(ep0, "null packet\n");
+		if (req->req.actual != req->req.length) {
+			req->req.status = req->req.short_not_ok ?
+					  -EREMOTEIO : 0;
+		} else {
+			req->req.status = 0;
+		}
+		return 0;
+	}
+
+	return -EINPROGRESS;
+}
+
+static void usbf_ep0_fifo_flush(struct usbf_ep *ep0)
+{
+	u32 sts;
+	int ret;
+
+	usbf_ep_reg_bitset(ep0, USBF_REG_EP0_CONTROL, USBF_EP0_BCLR);
+
+	ret = readl_poll_timeout_atomic(ep0->regs + USBF_REG_EP0_STATUS, sts,
+		(sts & (USBF_EP0_IN_DATA | USBF_EP0_IN_EMPTY)) == USBF_EP0_IN_EMPTY,
+		0,  10000);
+	if (ret)
+		dev_err(ep0->udc->dev, "ep0 flush fifo timed out\n");
+
+}
+
+static void usbf_epn_send_null(struct usbf_ep *epn)
+{
+	usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL, USBF_EPN_DEND);
+}
+
+static void usbf_epn_send_residue(struct usbf_ep *epn, const void *buf,
+				  unsigned int size)
+{
+	u32 tmp;
+
+	memcpy(&tmp, buf, size);
+	usbf_ep_reg_writel(epn, USBF_REG_EPN_WRITE, tmp);
+
+	usbf_ep_reg_clrset(epn, USBF_REG_EPN_CONTROL,
+				USBF_EPN_DW_MASK,
+				USBF_EPN_DW(size) | USBF_EPN_DEND);
+}
+
+static int usbf_epn_pio_in(struct usbf_ep *epn, struct usbf_req *req)
+{
+	unsigned int left;
+	unsigned int nb;
+	const void *buf;
+
+	left = req->req.length - req->req.actual;
+
+	if (left == 0) {
+		if (!req->is_zero_sent) {
+			if (req->req.length == 0) {
+				TRACEEP(epn, "ep%u send_null\n", epn->id);
+				usbf_epn_send_null(epn);
+				req->is_zero_sent = 1;
+				return -EINPROGRESS;
+			}
+			if ((req->req.actual % epn->ep.maxpacket) == 0) {
+				if (req->req.zero) {
+					TRACEEP(epn, "ep%u send_null\n",
+						epn->id);
+					usbf_epn_send_null(epn);
+					req->is_zero_sent = 1;
+					return -EINPROGRESS;
+				}
+			}
+		}
+		return 0;
+	}
+
+	if (left > epn->ep.maxpacket)
+		left = epn->ep.maxpacket;
+
+	buf = req->req.buf;
+	buf += req->req.actual;
+
+	nb = left / sizeof(u32);
+	if (nb) {
+		usbf_ep_reg_write_rep(epn, USBF_REG_EPN_WRITE, buf, nb);
+		buf += (nb * sizeof(u32));
+		req->req.actual += (nb * sizeof(u32));
+		left -= (nb * sizeof(u32));
+	}
+
+	if (left) {
+		usbf_epn_send_residue(epn, buf, left);
+		req->req.actual += left;
+	} else {
+		usbf_ep_reg_clrset(epn, USBF_REG_EPN_CONTROL,
+					USBF_EPN_DW_MASK,
+					USBF_EPN_DEND);
+	}
+
+	TRACEEP(epn, "ep%u send %u/%u\n", epn->id, req->req.actual,
+		req->req.length);
+
+	return -EINPROGRESS;
+}
+
+static void usbf_epn_enable_in_end_int(struct usbf_ep *epn)
+{
+	usbf_ep_reg_bitset(epn, USBF_REG_EPN_INT_ENA, USBF_EPN_IN_END_EN);
+}
+
+static int usbf_epn_dma_in(struct usbf_ep *epn, struct usbf_req *req)
+{
+	unsigned int left;
+	u32 npkt;
+	u32 lastpkt;
+	int ret;
+
+	if (!IS_ALIGNED((uintptr_t)req->req.buf, 4)) {
+		TRACEEP(epn, "ep%u buf unaligned -> fallback pio\n", epn->id);
+		return usbf_epn_pio_in(epn, req);
+	}
+
+	left = req->req.length - req->req.actual;
+
+	switch (req->xfer_step) {
+	default:
+	case USBF_XFER_START:
+		if (left == 0) {
+			TRACEEP(epn, "ep%u send null\n", epn->id);
+			usbf_epn_send_null(epn);
+			req->xfer_step = USBF_XFER_WAIT_END;
+			break;
+		}
+		if (left < 4) {
+			TRACEEP(epn, "ep%u send residue %u\n", epn->id, left);
+			usbf_epn_send_residue(epn,
+				req->req.buf + req->req.actual, left);
+			req->req.actual += left;
+			req->xfer_step = USBF_XFER_WAIT_END;
+			break;
+		}
+
+		ret = usb_gadget_map_request(&epn->udc->gadget, &req->req, 1);
+		if (ret < 0) {
+			dev_err(epn->udc->dev, "usb_gadget_map_request failed (%d)\n",
+				ret);
+			return ret;
+		}
+		req->is_mapped = 1;
+
+		npkt = DIV_ROUND_UP(left, epn->ep.maxpacket);
+		lastpkt = (left % epn->ep.maxpacket);
+		if (lastpkt == 0)
+			lastpkt = epn->ep.maxpacket;
+		lastpkt &= ~0x3; /* DMA is done on 32bit units */
+
+		usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR2,
+			USBF_SYS_EPN_MPKT(epn->ep.maxpacket) | USBF_SYS_EPN_LMPKT(lastpkt));
+		usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_TADR,
+			req->req.dma);
+		usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR1,
+			USBF_SYS_EPN_SET_DMACNT(npkt));
+		usbf_ep_dma_reg_bitset(epn, USBF_REG_DMA_EPN_DCR1,
+			USBF_SYS_EPN_REQEN);
+
+		usbf_ep_reg_writel(epn, USBF_REG_EPN_LEN_DCNT, USBF_EPN_SET_DMACNT(npkt));
+
+		usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL, USBF_EPN_AUTO);
+
+		/* The end of DMA transfer at the USBF level needs to be handle
+		 * after the detection of the end of DMA transfer at the brige
+		 * level.
+		 * To force this sequence, EPN_IN_END_EN will be set by the
+		 * detection of the end of transfer at bridge level (ie. bridge
+		 * interrupt).
+		 */
+		usbf_ep_reg_bitclr(epn, USBF_REG_EPN_INT_ENA,
+			USBF_EPN_IN_EN | USBF_EPN_IN_END_EN);
+		epn->bridge_on_dma_end = usbf_epn_enable_in_end_int;
+
+		/* Clear any pending IN_END interrupt */
+		usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, ~(u32)USBF_EPN_IN_END_INT);
+
+		usbf_ep_reg_writel(epn, USBF_REG_EPN_DMA_CTRL,
+			USBF_EPN_BURST_SET | USBF_EPN_DMAMODE0);
+		usbf_ep_reg_bitset(epn, USBF_REG_EPN_DMA_CTRL,
+			USBF_EPN_DMA_EN);
+
+		req->dma_size = (npkt - 1) * epn->ep.maxpacket + lastpkt;
+
+		TRACEEP(epn, "ep%u dma xfer %zu\n", epn->id, req->dma_size);
+
+		req->xfer_step = USBF_XFER_WAIT_DMA;
+		break;
+
+	case USBF_XFER_WAIT_DMA:
+		if (!(epn->status & USBF_EPN_IN_END_INT)) {
+			TRACEEP(epn, "ep%u dma not done\n", epn->id);
+			break;
+		}
+		TRACEEP(epn, "ep%u dma done\n", epn->id);
+
+		usb_gadget_unmap_request(&epn->udc->gadget, &req->req, 1);
+		req->is_mapped = 0;
+
+		usbf_ep_reg_bitclr(epn, USBF_REG_EPN_CONTROL, USBF_EPN_AUTO);
+
+		usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA,
+			USBF_EPN_IN_END_EN,
+			USBF_EPN_IN_EN);
+
+		req->req.actual += req->dma_size;
+
+		left = req->req.length - req->req.actual;
+		if (left) {
+			usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, ~(u32)USBF_EPN_IN_INT);
+
+			TRACEEP(epn, "ep%u send residue %u\n", epn->id, left);
+			usbf_epn_send_residue(epn,
+				req->req.buf + req->req.actual, left);
+			req->req.actual += left;
+			req->xfer_step = USBF_XFER_WAIT_END;
+			break;
+		}
+
+		if (req->req.actual % epn->ep.maxpacket) {
+			/* last packet was a short packet. Tell the hardware to
+			 * send it right now.
+			 */
+			TRACEEP(epn, "ep%u send short\n", epn->id);
+
+			usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS,
+				~(u32)USBF_EPN_IN_INT);
+			usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL,
+				USBF_EPN_DEND);
+
+			req->xfer_step = USBF_XFER_WAIT_END;
+			break;
+		}
+
+		/* Last packet size was a maxpacket size
+		 * Send null packet if needed
+		 */
+		if (req->req.zero) {
+			req->xfer_step = USBF_XFER_SEND_NULL;
+			break;
+		}
+
+		/* No more action to do. Wait for the end of the USB transfer */
+		req->xfer_step = USBF_XFER_WAIT_END;
+		break;
+
+	case USBF_XFER_SEND_NULL:
+		TRACEEP(epn, "ep%u send null\n", epn->id);
+		usbf_epn_send_null(epn);
+		req->xfer_step = USBF_XFER_WAIT_END;
+		break;
+
+	case USBF_XFER_WAIT_END:
+		if (!(epn->status & USBF_EPN_IN_INT)) {
+			TRACEEP(epn, "ep%u end not done\n", epn->id);
+			break;
+		}
+		TRACEEP(epn, "ep%u send done %u/%u\n", epn->id,
+			req->req.actual, req->req.length);
+		req->xfer_step = USBF_XFER_START;
+		return 0;
+	}
+
+	return -EINPROGRESS;
+}
+
+static void usbf_epn_recv_residue(struct usbf_ep *epn, void *buf,
+				  unsigned int size)
+{
+	u32 last;
+
+	last = usbf_ep_reg_readl(epn, USBF_REG_EPN_READ);
+	memcpy(buf, &last, size);
+}
+
+static int usbf_epn_pio_out(struct usbf_ep *epn, struct usbf_req *req)
+{
+	int req_status = 0;
+	unsigned int count;
+	unsigned int recv;
+	unsigned int left;
+	unsigned int nb;
+	void *buf;
+
+	if (epn->status & USBF_EPN_OUT_INT) {
+		recv = USBF_EPN_GET_LDATA(
+			usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT));
+		count = recv;
+
+		buf = req->req.buf;
+		buf += req->req.actual;
+
+		left = req->req.length - req->req.actual;
+
+		TRACEEP(epn, "ep%u recv %u, left %u, mpkt %u\n", epn->id,
+			recv, left, epn->ep.maxpacket);
+
+		if (left > epn->ep.maxpacket)
+			left = epn->ep.maxpacket;
+
+		if (count > left) {
+			req_status = -EOVERFLOW;
+			count = left;
+		}
+
+		if (count) {
+			nb = count / sizeof(u32);
+			if (nb) {
+				usbf_ep_reg_read_rep(epn, USBF_REG_EPN_READ,
+					buf, nb);
+				buf += (nb * sizeof(u32));
+				req->req.actual += (nb * sizeof(u32));
+				count -= (nb * sizeof(u32));
+			}
+			if (count) {
+				usbf_epn_recv_residue(epn, buf, count);
+				req->req.actual += count;
+			}
+		}
+		TRACEEP(epn, "ep%u recv %u/%u\n", epn->id,
+			req->req.actual, req->req.length);
+
+		if (req_status) {
+			TRACEEP(epn, "ep%u req.status=%d\n", epn->id,
+				req_status);
+			req->req.status = req_status;
+			return 0;
+		}
+
+		if (recv < epn->ep.maxpacket) {
+			TRACEEP(epn, "ep%u short packet\n", epn->id);
+			/* This is a short packet -> It is the end */
+			req->req.status = 0;
+			return 0;
+		}
+
+		/* Request full -> complete */
+		if (req->req.actual == req->req.length) {
+			req->req.status = 0;
+			return 0;
+		}
+	}
+
+	if (epn->status & USBF_EPN_OUT_NULL_INT) {
+		/* NULL packet received */
+		TRACEEP(epn, "ep%u null packet\n", epn->id);
+		if (req->req.actual != req->req.length) {
+			req->req.status = req->req.short_not_ok ?
+					  -EREMOTEIO : 0;
+		} else {
+			req->req.status = 0;
+		}
+		return 0;
+	}
+
+	return -EINPROGRESS;
+}
+
+static void usbf_epn_enable_out_end_int(struct usbf_ep *epn)
+{
+	usbf_ep_reg_bitset(epn, USBF_REG_EPN_INT_ENA, USBF_EPN_OUT_END_EN);
+}
+
+static void usbf_epn_process_queue(struct usbf_ep *epn);
+
+static void usbf_epn_dma_out_send_dma(struct usbf_ep *epn, dma_addr_t addr, u32 npkt, bool is_short)
+{
+	usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR2, USBF_SYS_EPN_MPKT(epn->ep.maxpacket));
+	usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_TADR, addr);
+
+	if (is_short) {
+		usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR1,
+				USBF_SYS_EPN_SET_DMACNT(1) | USBF_SYS_EPN_DIR0);
+		usbf_ep_dma_reg_bitset(epn, USBF_REG_DMA_EPN_DCR1,
+				USBF_SYS_EPN_REQEN);
+
+		usbf_ep_reg_writel(epn, USBF_REG_EPN_LEN_DCNT,
+				USBF_EPN_SET_DMACNT(0));
+
+		/* The end of DMA transfer at the USBF level needs to be handled
+		 * after the detection of the end of DMA transfer at the brige
+		 * level.
+		 * To force this sequence, enabling the OUT_END interrupt will
+		 * be donee by the detection of the end of transfer at bridge
+		 * level (ie. bridge interrupt).
+		 */
+		usbf_ep_reg_bitclr(epn, USBF_REG_EPN_INT_ENA,
+			USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN | USBF_EPN_OUT_END_EN);
+		epn->bridge_on_dma_end = usbf_epn_enable_out_end_int;
+
+		/* Clear any pending OUT_END interrupt */
+		usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS,
+			~(u32)USBF_EPN_OUT_END_INT);
+
+		usbf_ep_reg_writel(epn, USBF_REG_EPN_DMA_CTRL,
+			USBF_EPN_STOP_MODE | USBF_EPN_STOP_SET | USBF_EPN_DMAMODE0);
+		usbf_ep_reg_bitset(epn, USBF_REG_EPN_DMA_CTRL,
+			USBF_EPN_DMA_EN);
+		return;
+	}
+
+	usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR1,
+		USBF_SYS_EPN_SET_DMACNT(npkt) | USBF_SYS_EPN_DIR0);
+	usbf_ep_dma_reg_bitset(epn, USBF_REG_DMA_EPN_DCR1,
+		USBF_SYS_EPN_REQEN);
+
+	usbf_ep_reg_writel(epn, USBF_REG_EPN_LEN_DCNT,
+		USBF_EPN_SET_DMACNT(npkt));
+
+	/* Here, the bridge may or may not generate an interrupt to signal the
+	 * end of DMA transfer.
+	 * Keep only OUT_END interrupt and let handle the bridge later during
+	 * the OUT_END processing.
+	 */
+	usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA,
+		USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN,
+		USBF_EPN_OUT_END_EN);
+
+	/* Disable bridge interrupt. It will be renabled later */
+	usbf_reg_bitclr(epn->udc, USBF_REG_AHBBINTEN,
+		USBF_SYS_DMA_ENDINTEN_EPN(epn->id));
+
+	/* Clear any pending DMA_END interrupt at bridge level */
+	usbf_reg_writel(epn->udc, USBF_REG_AHBBINT,
+		USBF_SYS_DMA_ENDINT_EPN(epn->id));
+
+	/* Clear any pending OUT_END interrupt */
+	usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS,
+		~(u32)USBF_EPN_OUT_END_INT);
+
+	usbf_ep_reg_writel(epn, USBF_REG_EPN_DMA_CTRL,
+		USBF_EPN_STOP_MODE | USBF_EPN_STOP_SET | USBF_EPN_DMAMODE0 | USBF_EPN_BURST_SET);
+	usbf_ep_reg_bitset(epn, USBF_REG_EPN_DMA_CTRL,
+		USBF_EPN_DMA_EN);
+}
+
+static size_t usbf_epn_dma_out_complete_dma(struct usbf_ep *epn, bool is_short)
+{
+	u32 dmacnt;
+	u32 tmp;
+	int ret;
+
+	/* Restore interrupt mask */
+	usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA,
+		USBF_EPN_OUT_END_EN,
+		USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN);
+
+	if (is_short) {
+		/* Nothing more to do when the DMA was for a short packet */
+		return 0;
+	}
+
+	/* Enable the bridge interrupt */
+	usbf_reg_bitset(epn->udc, USBF_REG_AHBBINTEN,
+		USBF_SYS_DMA_ENDINTEN_EPN(epn->id));
+
+	tmp = usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT);
+	dmacnt = USBF_EPN_GET_DMACNT(tmp);
+
+	if (dmacnt) {
+		/* Some packet were not received (halted by a short or a null
+		 * packet.
+		 * The bridge never raises an interrupt in this case.
+		 * Wait for the end of transfer at bridge level
+		 */
+		ret = readl_poll_timeout_atomic(
+			epn->dma_regs + USBF_REG_DMA_EPN_DCR1,
+			tmp, (USBF_SYS_EPN_GET_DMACNT(tmp) == dmacnt),
+			0,  10000);
+		if (ret) {
+			dev_err(epn->udc->dev, "ep%u wait bridge timed out\n",
+				epn->id);
+		}
+
+		usbf_ep_dma_reg_bitclr(epn, USBF_REG_DMA_EPN_DCR1,
+			USBF_SYS_EPN_REQEN);
+
+		/* The dmacnt value tells how many packet were not transferred
+		 * from the maximum number of packet we set for the DMA transfer.
+		 * Compute the left DMA size based on this value.
+		 */
+		return dmacnt * epn->ep.maxpacket;
+	}
+
+	return 0;
+}
+
+static int usbf_epn_dma_out(struct usbf_ep *epn, struct usbf_req *req)
+{
+	unsigned int dma_left;
+	unsigned int count;
+	unsigned int recv;
+	unsigned int left;
+	u32 npkt;
+	int ret;
+
+	if (!IS_ALIGNED((uintptr_t)req->req.buf, 4)) {
+		TRACEEP(epn, "ep%u buf unaligned -> fallback pio\n", epn->id);
+		return usbf_epn_pio_out(epn, req);
+	}
+
+	switch (req->xfer_step) {
+	default:
+	case USBF_XFER_START:
+		if (epn->status & USBF_EPN_OUT_NULL_INT) {
+			TRACEEP(epn, "ep%u null packet\n", epn->id);
+			if (req->req.actual != req->req.length) {
+				req->req.status = req->req.short_not_ok ?
+					-EREMOTEIO : 0;
+			} else {
+				req->req.status = 0;
+			}
+			return 0;
+		}
+
+		if (!(epn->status & USBF_EPN_OUT_INT)) {
+			TRACEEP(epn, "ep%u OUT_INT not set -> spurious\n",
+				epn->id);
+			break;
+		}
+
+		recv = USBF_EPN_GET_LDATA(
+			usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT));
+		if (!recv) {
+			TRACEEP(epn, "ep%u recv = 0 -> spurious\n",
+				epn->id);
+			break;
+		}
+
+		left = req->req.length - req->req.actual;
+
+		TRACEEP(epn, "ep%u recv %u, left %u, mpkt %u\n", epn->id,
+			recv, left, epn->ep.maxpacket);
+
+		if (recv > left) {
+			dev_err(epn->udc->dev, "ep%u overflow (%u/%u)\n",
+				epn->id, recv, left);
+			req->req.status = -EOVERFLOW;
+			return -EOVERFLOW;
+		}
+
+		if (recv < epn->ep.maxpacket) {
+			/* Short packet received */
+			TRACEEP(epn, "ep%u short packet\n", epn->id);
+			if (recv <= 3) {
+				usbf_epn_recv_residue(epn,
+					req->req.buf + req->req.actual, recv);
+				req->req.actual += recv;
+
+				TRACEEP(epn, "ep%u recv done %u/%u\n", epn->id,
+					req->req.actual, req->req.length);
+
+				req->xfer_step = USBF_XFER_START;
+				return 0;
+			}
+
+			ret = usb_gadget_map_request(&epn->udc->gadget, &req->req, 0);
+			if (ret < 0) {
+				dev_err(epn->udc->dev, "map request failed (%d)\n",
+					ret);
+				return ret;
+			}
+			req->is_mapped = 1;
+
+			usbf_epn_dma_out_send_dma(epn,
+				req->req.dma + req->req.actual,
+				1, true);
+			req->dma_size = recv & ~0x3;
+
+			TRACEEP(epn, "ep%u dma short xfer %zu\n", epn->id,
+				req->dma_size);
+
+			req->xfer_step = USBF_XFER_WAIT_DMA_SHORT;
+			break;
+		}
+
+		ret = usb_gadget_map_request(&epn->udc->gadget, &req->req, 0);
+		if (ret < 0) {
+			dev_err(epn->udc->dev, "map request failed (%d)\n",
+				ret);
+			return ret;
+		}
+		req->is_mapped = 1;
+
+		/* Use the maximum DMA size according to the request buffer.
+		 * We will adjust the received size later at the end of the DMA
+		 * transfer with the left size computed from
+		 * usbf_epn_dma_out_complete_dma().
+		 */
+		npkt = left / epn->ep.maxpacket;
+		usbf_epn_dma_out_send_dma(epn,
+				req->req.dma + req->req.actual,
+				npkt, false);
+		req->dma_size = npkt * epn->ep.maxpacket;
+
+		TRACEEP(epn, "ep%u dma xfer %zu (%u)\n", epn->id,
+			req->dma_size, npkt);
+
+		req->xfer_step = USBF_XFER_WAIT_DMA;
+		break;
+
+	case USBF_XFER_WAIT_DMA_SHORT:
+		if (!(epn->status & USBF_EPN_OUT_END_INT)) {
+			TRACEEP(epn, "ep%u dma short not done\n", epn->id);
+			break;
+		}
+		TRACEEP(epn, "ep%u dma short done\n", epn->id);
+
+		usbf_epn_dma_out_complete_dma(epn, true);
+
+		usb_gadget_unmap_request(&epn->udc->gadget, &req->req, 0);
+		req->is_mapped = 0;
+
+		req->req.actual += req->dma_size;
+
+		recv = USBF_EPN_GET_LDATA(
+			usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT));
+
+		count = recv & 0x3;
+		if (count) {
+			TRACEEP(epn, "ep%u recv residue %u\n", epn->id,
+				count);
+			usbf_epn_recv_residue(epn,
+				req->req.buf + req->req.actual, count);
+			req->req.actual += count;
+		}
+
+		TRACEEP(epn, "ep%u recv done %u/%u\n", epn->id,
+			req->req.actual, req->req.length);
+
+		req->xfer_step = USBF_XFER_START;
+		return 0;
+
+	case USBF_XFER_WAIT_DMA:
+		if (!(epn->status & USBF_EPN_OUT_END_INT)) {
+			TRACEEP(epn, "ep%u dma not done\n", epn->id);
+			break;
+		}
+		TRACEEP(epn, "ep%u dma done\n", epn->id);
+
+		dma_left = usbf_epn_dma_out_complete_dma(epn, false);
+		if (dma_left) {
+			/* Adjust the final DMA size with */
+			count = req->dma_size - dma_left;
+
+			TRACEEP(epn, "ep%u dma xfer done %u\n", epn->id, count);
+
+			req->req.actual += count;
+
+			if (epn->status & USBF_EPN_OUT_NULL_INT) {
+				/* DMA was stopped by a null packet reception */
+				TRACEEP(epn, "ep%u dma stopped by null pckt\n",
+					epn->id);
+				usb_gadget_unmap_request(&epn->udc->gadget,
+							 &req->req, 0);
+				req->is_mapped = 0;
+
+				usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS,
+					~(u32)USBF_EPN_OUT_NULL_INT);
+
+				if (req->req.actual != req->req.length) {
+					req->req.status = req->req.short_not_ok ?
+						  -EREMOTEIO : 0;
+				} else {
+					req->req.status = 0;
+				}
+				TRACEEP(epn, "ep%u recv done %u/%u\n", epn->id,
+					req->req.actual, req->req.length);
+				req->xfer_step = USBF_XFER_START;
+				return 0;
+			}
+
+			recv = USBF_EPN_GET_LDATA(
+				usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT));
+			left = req->req.length - req->req.actual;
+			if (recv > left) {
+				dev_err(epn->udc->dev,
+					"ep%u overflow (%u/%u)\n", epn->id,
+					recv, left);
+				req->req.status = -EOVERFLOW;
+				usb_gadget_unmap_request(&epn->udc->gadget,
+							 &req->req, 0);
+				req->is_mapped = 0;
+
+				req->xfer_step = USBF_XFER_START;
+				return -EOVERFLOW;
+			}
+
+			if (recv > 3) {
+				usbf_epn_dma_out_send_dma(epn,
+					req->req.dma + req->req.actual,
+					1, true);
+				req->dma_size = recv & ~0x3;
+
+				TRACEEP(epn, "ep%u dma short xfer %zu\n", epn->id,
+					req->dma_size);
+
+				req->xfer_step = USBF_XFER_WAIT_DMA_SHORT;
+				break;
+			}
+
+			usb_gadget_unmap_request(&epn->udc->gadget, &req->req, 0);
+			req->is_mapped = 0;
+
+			count = recv & 0x3;
+			if (count) {
+				TRACEEP(epn, "ep%u recv residue %u\n", epn->id,
+					count);
+				usbf_epn_recv_residue(epn,
+					req->req.buf + req->req.actual, count);
+				req->req.actual += count;
+			}
+
+			TRACEEP(epn, "ep%u recv done %u/%u\n", epn->id,
+				req->req.actual, req->req.length);
+
+			req->xfer_step = USBF_XFER_START;
+			return 0;
+		}
+
+		/* Process queue at bridge interrupt only */
+		usbf_ep_reg_bitclr(epn, USBF_REG_EPN_INT_ENA,
+			USBF_EPN_OUT_END_EN | USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN);
+		epn->status = 0;
+		epn->bridge_on_dma_end = usbf_epn_process_queue;
+
+		req->xfer_step = USBF_XFER_WAIT_BRIDGE;
+		break;
+
+	case USBF_XFER_WAIT_BRIDGE:
+		TRACEEP(epn, "ep%u bridge transfers done\n", epn->id);
+
+		/* Restore interrupt mask */
+		usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA,
+			USBF_EPN_OUT_END_EN,
+			USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN);
+
+		usb_gadget_unmap_request(&epn->udc->gadget, &req->req, 0);
+		req->is_mapped = 0;
+
+		req->req.actual += req->dma_size;
+
+		req->xfer_step = USBF_XFER_START;
+		left = req->req.length - req->req.actual;
+		if (!left) {
+			/* No more data can be added to the buffer */
+			TRACEEP(epn, "ep%u recv done %u/%u\n", epn->id,
+				req->req.actual, req->req.length);
+			return 0;
+		}
+		TRACEEP(epn, "ep%u recv done %u/%u, wait more data\n", epn->id,
+			req->req.actual, req->req.length);
+		break;
+	}
+
+	return -EINPROGRESS;
+}
+
+static void usbf_epn_dma_stop(struct usbf_ep *epn)
+{
+	usbf_ep_dma_reg_bitclr(epn, USBF_REG_DMA_EPN_DCR1, USBF_SYS_EPN_REQEN);
+
+	/* In the datasheet:
+	 *   If EP[m]_REQEN = 0b is set during DMA transfer, AHB-EPC stops DMA
+	 *   after 1 packet transfer completed.
+	 *   Therefore, wait sufficient time for ensuring DMA transfer
+	 *   completion. The WAIT time depends on the system, especially AHB
+	 *   bus activity
+	 * So arbitrary 10ms would be sufficient.
+	 */
+	mdelay(10);
+
+	usbf_ep_reg_bitclr(epn, USBF_REG_EPN_DMA_CTRL, USBF_EPN_DMA_EN);
+}
+
+static void usbf_epn_dma_abort(struct usbf_ep *epn,  struct usbf_req *req)
+{
+	TRACEEP(epn, "ep%u %s dma abort\n", epn->id, epn->is_in ? "in" : "out");
+
+	epn->bridge_on_dma_end = NULL;
+
+	usbf_epn_dma_stop(epn);
+
+	usb_gadget_unmap_request(&epn->udc->gadget, &req->req,
+				 epn->is_in ? 1 : 0);
+	req->is_mapped = 0;
+
+	usbf_ep_reg_bitclr(epn, USBF_REG_EPN_CONTROL, USBF_EPN_AUTO);
+
+	if (epn->is_in) {
+		usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA,
+			USBF_EPN_IN_END_EN,
+			USBF_EPN_IN_EN);
+	} else {
+		usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA,
+			USBF_EPN_OUT_END_EN,
+			USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN);
+	}
+
+	/* As dma is stopped, be sure that no DMA interrupt are pending */
+	usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS,
+		USBF_EPN_IN_END_INT | USBF_EPN_OUT_END_INT);
+
+	usbf_reg_writel(epn->udc, USBF_REG_AHBBINT, USBF_SYS_DMA_ENDINT_EPN(epn->id));
+
+	/* Enable DMA interrupt the bridge level */
+	usbf_reg_bitset(epn->udc, USBF_REG_AHBBINTEN,
+		USBF_SYS_DMA_ENDINTEN_EPN(epn->id));
+
+	/* Reset transfer step */
+	req->xfer_step = USBF_XFER_START;
+}
+
+static void usbf_epn_fifo_flush(struct usbf_ep *epn)
+{
+	u32 ctrl;
+	u32 sts;
+	int ret;
+
+	TRACEEP(epn, "ep%u %s fifo flush\n", epn->id, epn->is_in ? "in" : "out");
+
+	ctrl = usbf_ep_reg_readl(epn, USBF_REG_EPN_CONTROL);
+	usbf_ep_reg_writel(epn, USBF_REG_EPN_CONTROL, ctrl | USBF_EPN_BCLR);
+
+	if (ctrl & USBF_EPN_DIR0)
+		return;
+
+	ret = readl_poll_timeout_atomic(epn->regs + USBF_REG_EPN_STATUS, sts,
+		(sts & (USBF_EPN_IN_DATA | USBF_EPN_IN_EMPTY)) == USBF_EPN_IN_EMPTY,
+		0,  10000);
+	if (ret)
+		dev_err(epn->udc->dev, "ep%u flush fifo timed out\n", epn->id);
+}
+
+static void usbf_ep_req_done(struct usbf_ep *ep, struct usbf_req *req,
+			     int status)
+{
+	list_del_init(&req->queue);
+
+	if (status) {
+		req->req.status = status;
+	} else {
+		if (req->req.status == -EINPROGRESS)
+			req->req.status = status;
+	}
+
+	TRACEEP(ep, "ep%u %s req done length %u/%u, status=%d\n", ep->id,
+		ep->is_in ? "in" : "out",
+		req->req.actual, req->req.length, req->req.status);
+
+	if (req->is_mapped)
+		usbf_epn_dma_abort(ep, req);
+
+	spin_unlock(&ep->udc->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&ep->udc->lock);
+}
+
+static void usbf_ep_nuke(struct usbf_ep *ep, int status)
+{
+	struct usbf_req *req;
+
+	TRACEEP(ep, "ep%u %s nuke status %d\n", ep->id,
+		ep->is_in ? "in" : "out",
+		status);
+
+	while (!list_empty(&ep->queue)) {
+		req = list_first_entry(&ep->queue, struct usbf_req, queue);
+		usbf_ep_req_done(ep, req, status);
+	}
+
+	if (ep->id == 0)
+		usbf_ep0_fifo_flush(ep);
+	else
+		usbf_epn_fifo_flush(ep);
+}
+
+static bool usbf_ep_is_stalled(struct usbf_ep *ep)
+{
+	u32 ctrl;
+
+	if (ep->id == 0) {
+		ctrl = usbf_ep_reg_readl(ep, USBF_REG_EP0_CONTROL);
+		return (ctrl & USBF_EP0_STL) ? true : false;
+	}
+
+	ctrl = usbf_ep_reg_readl(ep, USBF_REG_EPN_CONTROL);
+	if (ep->is_in)
+		return (ctrl & USBF_EPN_ISTL) ? true : false;
+
+	return (ctrl & USBF_EPN_OSTL) ? true : false;
+}
+
+static int usbf_epn_start_queue(struct usbf_ep *epn)
+{
+	struct usbf_req *req;
+	int ret;
+
+	if (usbf_ep_is_stalled(epn))
+		return 0;
+
+	req = list_first_entry_or_null(&epn->queue, struct usbf_req, queue);
+
+	if (epn->is_in) {
+		if (req && !epn->is_processing) {
+			ret = epn->dma_regs ?
+				usbf_epn_dma_in(epn, req) :
+				usbf_epn_pio_in(epn, req);
+			if (ret != -EINPROGRESS) {
+				dev_err(epn->udc->dev,
+					"queued next request not in progress\n");
+					/* The request cannot be completed (ie
+					 * ret == 0) on the first call.
+					 * stall and nuke the endpoint
+					 */
+				return ret ? ret : -EIO;
+			}
+		}
+	} else {
+		if (req) {
+			/* Clear ONAK to accept OUT tokens */
+			usbf_ep_reg_bitclr(epn, USBF_REG_EPN_CONTROL,
+				USBF_EPN_ONAK);
+
+			/* Enable interrupts */
+			usbf_ep_reg_bitset(epn, USBF_REG_EPN_INT_ENA,
+				USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT);
+		} else {
+			/* Disable incoming data and interrupt.
+			 * They will be enable on next usb_eb_queue call
+			 */
+			usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL,
+				USBF_EPN_ONAK);
+			usbf_ep_reg_bitclr(epn, USBF_REG_EPN_INT_ENA,
+				USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT);
+		}
+	}
+	return 0;
+}
+
+static int usbf_ep_process_queue(struct usbf_ep *ep)
+{
+	int (*usbf_ep_xfer)(struct usbf_ep *ep, struct usbf_req *req);
+	struct usbf_req *req;
+	int is_processing;
+	int ret;
+
+	if (ep->is_in) {
+		usbf_ep_xfer = usbf_ep0_pio_in;
+		if (ep->id) {
+			usbf_ep_xfer = ep->dma_regs ?
+					usbf_epn_dma_in : usbf_epn_pio_in;
+		}
+	} else {
+		usbf_ep_xfer = usbf_ep0_pio_out;
+		if (ep->id) {
+			usbf_ep_xfer = ep->dma_regs ?
+					usbf_epn_dma_out : usbf_epn_pio_out;
+		}
+	}
+
+	req = list_first_entry_or_null(&ep->queue, struct usbf_req, queue);
+	if (!req) {
+		dev_err(ep->udc->dev,
+			"no request available for ep%u %s process\n", ep->id,
+			ep->is_in ? "in" : "out");
+		return -ENOENT;
+	}
+
+	do {
+		/* Were going to read the FIFO for this current request.
+		 * NAK any other incoming data to avoid a race condition if no
+		 * more request are available.
+		 */
+		if (!ep->is_in && ep->id != 0) {
+			usbf_ep_reg_bitset(ep, USBF_REG_EPN_CONTROL,
+				USBF_EPN_ONAK);
+		}
+
+		ret = usbf_ep_xfer(ep, req);
+		if (ret == -EINPROGRESS) {
+			if (!ep->is_in && ep->id != 0) {
+				/* The current request needs more data.
+				 * Allow incoming data
+				 */
+				usbf_ep_reg_bitclr(ep, USBF_REG_EPN_CONTROL,
+					USBF_EPN_ONAK);
+			}
+			return ret;
+		}
+
+		is_processing = ep->is_processing;
+		ep->is_processing = 1;
+		usbf_ep_req_done(ep, req, ret);
+		ep->is_processing = is_processing;
+
+		if (ret) {
+			/* An error was detected during the request transfer.
+			 * Any pending DMA transfers were aborted by the
+			 * usbf_ep_req_done() call.
+			 * It's time to flush the fifo
+			 */
+			if (ep->id == 0)
+				usbf_ep0_fifo_flush(ep);
+			else
+				usbf_epn_fifo_flush(ep);
+		}
+
+		req = list_first_entry_or_null(&ep->queue, struct usbf_req,
+					       queue);
+
+		if (ep->is_in)
+			continue;
+
+		if (ep->id != 0) {
+			if (req) {
+				/* An other request is available.
+				 * Allow incoming data
+				 */
+				usbf_ep_reg_bitclr(ep, USBF_REG_EPN_CONTROL,
+					USBF_EPN_ONAK);
+			} else {
+				/* No request queued. Disable interrupts.
+				 * They will be enabled on usb_ep_queue
+				 */
+				usbf_ep_reg_bitclr(ep, USBF_REG_EPN_INT_ENA,
+					USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT);
+			}
+		}
+		/* Do not recall usbf_ep_xfer() */
+		return req ? -EINPROGRESS : 0;
+
+	} while (req);
+
+	return 0;
+}
+
+static void usbf_ep_stall(struct usbf_ep *ep, bool stall)
+{
+	struct usbf_req *first;
+
+	TRACEEP(ep, "ep%u %s %s\n", ep->id,
+		ep->is_in ? "in" : "out",
+		stall ? "stall" : "unstall");
+
+	if (ep->id == 0) {
+		if (stall)
+			usbf_ep_reg_bitset(ep, USBF_REG_EP0_CONTROL, USBF_EP0_STL);
+		else
+			usbf_ep_reg_bitclr(ep, USBF_REG_EP0_CONTROL, USBF_EP0_STL);
+		return;
+	}
+
+	if (stall) {
+		if (ep->is_in)
+			usbf_ep_reg_bitset(ep, USBF_REG_EPN_CONTROL,
+				USBF_EPN_ISTL);
+		else
+			usbf_ep_reg_bitset(ep, USBF_REG_EPN_CONTROL,
+				USBF_EPN_OSTL | USBF_EPN_OSTL_EN);
+	} else {
+		first = list_first_entry_or_null(&ep->queue, struct usbf_req, queue);
+		if (first && first->is_mapped) {
+			/* This can appear if the host halts an endpoint using
+			 * SET_FEATURE and then un-halts the endpoint
+			 */
+			usbf_epn_dma_abort(ep, first);
+		}
+		usbf_epn_fifo_flush(ep);
+		if (ep->is_in) {
+			usbf_ep_reg_clrset(ep, USBF_REG_EPN_CONTROL,
+				USBF_EPN_ISTL,
+				USBF_EPN_IPIDCLR);
+		} else {
+			usbf_ep_reg_clrset(ep, USBF_REG_EPN_CONTROL,
+				USBF_EPN_OSTL,
+				USBF_EPN_OSTL_EN | USBF_EPN_OPIDCLR);
+		}
+		usbf_epn_start_queue(ep);
+	}
+}
+
+static void usbf_ep0_enable(struct usbf_ep *ep0)
+{
+	usbf_ep_reg_writel(ep0, USBF_REG_EP0_CONTROL, USBF_EP0_INAK_EN | USBF_EP0_BCLR);
+
+	usbf_ep_reg_writel(ep0, USBF_REG_EP0_INT_ENA,
+		USBF_EP0_SETUP_EN | USBF_EP0_STG_START_EN | USBF_EP0_STG_END_EN |
+		USBF_EP0_OUT_EN | USBF_EP0_OUT_NULL_EN | USBF_EP0_IN_EN);
+
+	ep0->udc->ep0state = EP0_IDLE;
+	ep0->disabled = 0;
+
+	/* enable interrupts for the ep0 */
+	usbf_reg_bitset(ep0->udc, USBF_REG_USB_INT_ENA, USBF_USB_EPN_EN(0));
+}
+
+static int usbf_epn_enable(struct usbf_ep *epn)
+{
+	u32 base_addr;
+	u32 ctrl;
+
+	base_addr = usbf_ep_info[epn->id].base_addr;
+	usbf_ep_reg_writel(epn, USBF_REG_EPN_PCKT_ADRS,
+		USBF_EPN_BASEAD(base_addr) | USBF_EPN_MPKT(epn->ep.maxpacket));
+
+	/* OUT transfer interrupt are enabled during usb_ep_queue */
+	if (epn->is_in) {
+		/* Will be changed in DMA processing */
+		usbf_ep_reg_writel(epn, USBF_REG_EPN_INT_ENA, USBF_EPN_IN_EN);
+	}
+
+	/* Clear, set endpoint direction, set IN/OUT STL, and enable
+	 * Send NAK for Data out as request are not queued yet
+	 */
+	ctrl = USBF_EPN_EN | USBF_EPN_BCLR;
+	if (epn->is_in)
+		ctrl |= USBF_EPN_OSTL | USBF_EPN_OSTL_EN;
+	else
+		ctrl |= USBF_EPN_DIR0 | USBF_EPN_ISTL | USBF_EPN_OSTL_EN | USBF_EPN_ONAK;
+	usbf_ep_reg_writel(epn, USBF_REG_EPN_CONTROL, ctrl);
+
+	return 0;
+}
+
+static int usbf_ep_enable(struct usb_ep *_ep,
+			  const struct usb_endpoint_descriptor *desc)
+{
+	struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+	struct usbf_udc *udc = ep->udc;
+	unsigned long flags;
+	int ret;
+
+	if (ep->id == 0) {
+		TRACEEP(ep, "ep0 invalid call\n");
+		return -EINVAL;
+	}
+
+	if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
+		TRACEEP(ep, "ep%u bad descriptor\n", ep->id);
+		return -EINVAL;
+	}
+
+	TRACEEP(ep, "ep%u %s mpkts %d\n", ep->id,
+		usb_endpoint_dir_in(desc) ? "in" : "out",
+		usb_endpoint_maxp(desc));
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	ep->is_in = usb_endpoint_dir_in(desc);
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
+
+	ret = usbf_epn_enable(ep);
+	if (ret)
+		goto end;
+
+	ep->disabled = 0;
+
+	/* enable interrupts for this endpoint */
+	usbf_reg_bitset(udc, USBF_REG_USB_INT_ENA, USBF_USB_EPN_EN(ep->id));
+
+	/* enable DMA interrupt at bridge level if DMA is used */
+	if (ep->dma_regs) {
+		ep->bridge_on_dma_end = NULL;
+		usbf_reg_bitset(udc, USBF_REG_AHBBINTEN,
+			USBF_SYS_DMA_ENDINTEN_EPN(ep->id));
+	}
+
+	ret = 0;
+end:
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+	return ret;
+}
+
+static int usbf_epn_disable(struct usbf_ep *epn)
+{
+	/* Disable interrupts */
+	usbf_ep_reg_writel(epn, USBF_REG_EPN_INT_ENA, 0);
+
+	/* Disable endpoint */
+	usbf_ep_reg_bitclr(epn, USBF_REG_EPN_CONTROL, USBF_EPN_EN);
+
+	/* remove anything that was pending */
+	usbf_ep_nuke(epn, -ESHUTDOWN);
+
+	return 0;
+}
+
+static int usbf_ep_disable(struct usb_ep *_ep)
+{
+	struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+	struct usbf_udc *udc = ep->udc;
+	unsigned long flags;
+	int ret;
+
+	if (ep->id == 0) {
+		TRACEEP(ep, "ep0 invalid call\n");
+		return -EINVAL;
+	}
+
+	TRACEEP(ep, "ep%u %s mpkts %d\n", ep->id,
+		ep->is_in ? "in" : "out", ep->ep.maxpacket);
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	ep->disabled = 1;
+	/* Disable DMA interrupt */
+	if (ep->dma_regs) {
+		usbf_reg_bitclr(udc, USBF_REG_AHBBINTEN,
+			USBF_SYS_DMA_ENDINTEN_EPN(ep->id));
+		ep->bridge_on_dma_end = NULL;
+	}
+	/* disable interrupts for this endpoint */
+	usbf_reg_bitclr(udc, USBF_REG_USB_INT_ENA, USBF_USB_EPN_EN(ep->id));
+	/* and the endpoint itself */
+	ret = usbf_epn_disable(ep);
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+	return ret;
+}
+
+static int usbf_ep0_queue(struct usbf_ep *ep0, struct usbf_req *req,
+			  gfp_t gfp_flags)
+{
+	int ret;
+
+	req->req.actual = 0;
+	req->req.status = -EINPROGRESS;
+	req->is_zero_sent = 0;
+
+	list_add_tail(&req->queue, &ep0->queue);
+
+	if (ep0->udc->ep0state == EP0_IN_STATUS_START_PHASE)
+		return 0;
+
+	if (!ep0->is_in)
+		return 0;
+
+	if (ep0->udc->ep0state == EP0_IN_STATUS_PHASE) {
+		if (req->req.length) {
+			dev_err(ep0->udc->dev,
+				"request lng %u for ep0 in status phase\n",
+				req->req.length);
+			return -EINVAL;
+		}
+		ep0->delayed_status = 0;
+	}
+	if (!ep0->is_processing) {
+		ret = usbf_ep0_pio_in(ep0, req);
+		if (ret != -EINPROGRESS) {
+			dev_err(ep0->udc->dev,
+				"queued request not in progress\n");
+			/* The request cannot be completed (ie
+			 * ret == 0) on the first call
+			 */
+			return ret ? ret : -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static int usbf_epn_queue(struct usbf_ep *ep, struct usbf_req *req,
+			  gfp_t gfp_flags)
+{
+	int was_empty;
+	int ret;
+
+	if (ep->disabled) {
+		dev_err(ep->udc->dev, "ep%u request queue while disable\n",
+			ep->id);
+		return -ESHUTDOWN;
+	}
+
+	req->req.actual = 0;
+	req->req.status = -EINPROGRESS;
+	req->is_zero_sent = 0;
+	req->xfer_step = USBF_XFER_START;
+
+	was_empty = list_empty(&ep->queue);
+	list_add_tail(&req->queue, &ep->queue);
+	if (was_empty) {
+		ret = usbf_epn_start_queue(ep);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+static int usbf_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+			 gfp_t gfp_flags)
+{
+	struct usbf_req *req = container_of(_req, struct usbf_req, req);
+	struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+	struct usbf_udc *udc = ep->udc;
+	unsigned long flags;
+	int ret;
+
+	if (!_req || !_req->buf) {
+		TRACEEP(ep, "ep%u invalid request\n", ep->id);
+		return -EINVAL;
+	}
+
+	if (!udc || !udc->driver) {
+		TRACEEP(ep, "ep%u invalid device\n", ep->id);
+		return -EINVAL;
+	}
+
+	TRACEEP(ep, "ep%u %s req queue length %u, zero %u, short_not_ok %u\n",
+		ep->id, ep->is_in ? "in" : "out",
+		req->req.length, req->req.zero, req->req.short_not_ok);
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	if (ep->id == 0)
+		ret = usbf_ep0_queue(ep, req, gfp_flags);
+	else
+		ret = usbf_epn_queue(ep, req, gfp_flags);
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+	return ret;
+}
+
+static int usbf_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct usbf_req *req = container_of(_req, struct usbf_req, req);
+	struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+	unsigned long flags;
+	int is_processing;
+	int first;
+	int ret;
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+
+	TRACEEP(ep, "ep%u %s req dequeue length %u/%u\n",
+		ep->id, ep->is_in ? "in" : "out",
+		req->req.actual, req->req.length);
+
+	first = list_is_first(&req->queue, &ep->queue);
+
+	/* Complete the request but avoid any operation that could be done
+	 * if a new request is queued during the request completion
+	 */
+	is_processing = ep->is_processing;
+	ep->is_processing = 1;
+	usbf_ep_req_done(ep, req, -ECONNRESET);
+	ep->is_processing = is_processing;
+
+	if (first) {
+		/* The first item in the list was dequeued.
+		 * This item could already be submitted to the hardware.
+		 * So, flush the fifo
+		 */
+		if (ep->id)
+			usbf_epn_fifo_flush(ep);
+		else
+			usbf_ep0_fifo_flush(ep);
+	}
+
+	if (ep->id == 0) {
+		/* We dequeue a request on ep0. On this endpoint, we can have
+		 * 1 request related to the data stage and/or 1 request
+		 * related to the status stage.
+		 * We dequeue one of them and so the USB control transaction
+		 * is no more coherent. The simple way to be consistent after
+		 * dequeuing is to stall and nuke the endpoint and wait the
+		 * next SETUP packet.
+		 */
+		usbf_ep_stall(ep, true);
+		usbf_ep_nuke(ep, -ECONNRESET);
+		ep->udc->ep0state = EP0_IDLE;
+		goto end;
+	}
+
+	if (!first)
+		goto end;
+
+	ret = usbf_epn_start_queue(ep);
+	if (ret) {
+		usbf_ep_stall(ep, true);
+		usbf_ep_nuke(ep, -EIO);
+	}
+end:
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+	return 0;
+}
+
+static struct usb_request *usbf_ep_alloc_request(struct usb_ep *_ep,
+						 gfp_t gfp_flags)
+{
+	struct usbf_req *req;
+
+	if (!_ep)
+		return NULL;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void usbf_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct usbf_req *req;
+	unsigned long flags;
+	struct usbf_ep *ep;
+
+	if (!_ep || !_req)
+		return;
+
+	req = container_of(_req, struct usbf_req, req);
+	ep = container_of(_ep, struct usbf_ep, ep);
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	list_del_init(&req->queue);
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+	kfree(req);
+}
+
+static int usbf_ep_set_halt(struct usb_ep *_ep, int halt)
+{
+	struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+	unsigned long flags;
+	int ret;
+
+	if (ep->id == 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+
+	if (!list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+		goto end;
+	}
+
+	usbf_ep_stall(ep, halt);
+	if (!halt)
+		ep->is_wedged = 0;
+
+	ret = 0;
+end:
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+	return ret;
+}
+
+static int usbf_ep_set_wedge(struct usb_ep *_ep)
+{
+	struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+	unsigned long flags;
+	int ret;
+
+	if (ep->id == 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	if (!list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+		goto end;
+	}
+	usbf_ep_stall(ep, 1);
+	ep->is_wedged = 1;
+
+	ret = 0;
+end:
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+	return ret;
+}
+
+static struct usb_ep_ops usbf_ep_ops = {
+	.enable = usbf_ep_enable,
+	.disable = usbf_ep_disable,
+	.queue = usbf_ep_queue,
+	.dequeue = usbf_ep_dequeue,
+	.set_halt = usbf_ep_set_halt,
+	.set_wedge = usbf_ep_set_wedge,
+	.alloc_request = usbf_ep_alloc_request,
+	.free_request = usbf_ep_free_request,
+};
+
+static void usbf_ep0_req_complete(struct usb_ep *_ep, struct usb_request *_req)
+{
+}
+
+static void usbf_ep0_fill_req(struct usbf_ep *ep0, struct usbf_req *req,
+			      void *buf, unsigned int length,
+			      void (*complete)(struct usb_ep *_ep,
+					       struct usb_request *_req))
+{
+	if (buf && length)
+		memcpy(ep0->udc->ep0_buf, buf, length);
+
+	req->req.buf = ep0->udc->ep0_buf;
+	req->req.length = length;
+	req->req.dma = 0;
+	req->req.zero = true;
+	req->req.complete = complete ? complete : usbf_ep0_req_complete;
+	req->req.status = -EINPROGRESS;
+	req->req.context = NULL;
+	req->req.actual = 0;
+}
+
+static struct usbf_ep *usbf_get_ep_by_addr(struct usbf_udc *udc, u8 address)
+{
+	struct usbf_ep *ep;
+	unsigned int i;
+
+	if ((address & USB_ENDPOINT_NUMBER_MASK) == 0)
+		return &udc->ep[0];
+
+	for (i = 1; i < ARRAY_SIZE(udc->ep); i++) {
+		ep = &udc->ep[i];
+
+		if (!ep->ep.desc)
+			continue;
+
+		if (ep->ep.desc->bEndpointAddress == address)
+			return ep;
+	}
+
+	return NULL;
+}
+
+static int usbf_req_delegate(struct usbf_udc *udc,
+			     const struct usb_ctrlrequest *ctrlrequest)
+{
+	int ret;
+
+	spin_unlock(&udc->lock);
+	ret = udc->driver->setup(&udc->gadget, ctrlrequest);
+	spin_lock(&udc->lock);
+	if (ret < 0) {
+		TRACEEP(&udc->ep[0], "udc driver setup failed %d\n", ret);
+		return ret;
+	}
+	if (ret == USB_GADGET_DELAYED_STATUS) {
+		TRACEEP(&udc->ep[0], "delayed status set\n");
+		udc->ep[0].delayed_status = 1;
+		return 0;
+	}
+	return ret;
+}
+
+static int usbf_req_get_status(struct usbf_udc *udc,
+			       const struct usb_ctrlrequest *ctrlrequest)
+{
+	struct usbf_ep *ep;
+	u16 status_data;
+	u16 wLength;
+	u16 wValue;
+	u16 wIndex;
+
+	wValue  = le16_to_cpu(ctrlrequest->wValue);
+	wLength = le16_to_cpu(ctrlrequest->wLength);
+	wIndex  = le16_to_cpu(ctrlrequest->wIndex);
+
+	switch (ctrlrequest->bRequestType) {
+	case USB_DIR_IN | USB_RECIP_DEVICE | USB_TYPE_STANDARD:
+		if ((wValue != 0) || (wIndex != 0) || (wLength != 2))
+			goto delegate;
+
+		status_data = 0;
+		if (udc->gadget.is_selfpowered)
+			status_data |= BIT(USB_DEVICE_SELF_POWERED);
+
+		if (udc->is_remote_wakeup)
+			status_data |= BIT(USB_DEVICE_REMOTE_WAKEUP);
+
+		break;
+
+	case USB_DIR_IN | USB_RECIP_ENDPOINT | USB_TYPE_STANDARD:
+		if ((wValue != 0) || (wLength != 2))
+			goto delegate;
+
+		ep = usbf_get_ep_by_addr(udc, wIndex);
+		if (!ep)
+			return -EINVAL;
+
+		status_data = 0;
+		if (usbf_ep_is_stalled(ep))
+			status_data |= cpu_to_le16(1);
+		break;
+
+	case USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_STANDARD:
+		if ((wValue != 0) || (wLength != 2))
+			goto delegate;
+		status_data = 0;
+		break;
+
+	default:
+		goto delegate;
+	}
+
+	usbf_ep0_fill_req(&udc->ep[0], &udc->setup_reply, &status_data,
+			  sizeof(status_data), NULL);
+	usbf_ep0_queue(&udc->ep[0], &udc->setup_reply, GFP_ATOMIC);
+
+	return 0;
+
+delegate:
+	return usbf_req_delegate(udc, ctrlrequest);
+}
+
+static int usbf_req_clear_set_feature(struct usbf_udc *udc,
+				      const struct usb_ctrlrequest *ctrlrequest,
+				      bool is_set)
+{
+	struct usbf_ep *ep;
+	u16 wLength;
+	u16 wValue;
+	u16 wIndex;
+
+	wValue  = le16_to_cpu(ctrlrequest->wValue);
+	wLength = le16_to_cpu(ctrlrequest->wLength);
+	wIndex  = le16_to_cpu(ctrlrequest->wIndex);
+
+	switch (ctrlrequest->bRequestType) {
+	case USB_DIR_OUT | USB_RECIP_DEVICE:
+		if ((wIndex != 0) || (wLength != 0))
+			goto delegate;
+
+		if (wValue != cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
+			goto delegate;
+
+		udc->is_remote_wakeup = is_set;
+		break;
+
+	case USB_DIR_OUT | USB_RECIP_ENDPOINT:
+		if (wLength != 0)
+			goto delegate;
+
+		ep = usbf_get_ep_by_addr(udc, wIndex);
+		if (!ep)
+			return -EINVAL;
+
+		if ((ep->id == 0) && is_set) {
+			/* Endpoint 0 cannot be halted (stalled)
+			 * Returning an error code leads to a STALL on this ep0
+			 * but keep the automate in a consistent state.
+			 */
+			return -EINVAL;
+		}
+		if (ep->is_wedged && !is_set) {
+			/* Ignore CLEAR_FEATURE(HALT ENDPOINT) when the
+			 * endpoint is wedged
+			 */
+			break;
+		}
+		usbf_ep_stall(ep, is_set);
+		break;
+
+	default:
+		goto delegate;
+	}
+
+	return 0;
+
+delegate:
+	return usbf_req_delegate(udc, ctrlrequest);
+}
+
+static void usbf_ep0_req_set_address_complete(struct usb_ep *_ep,
+					      struct usb_request *_req)
+{
+	struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+
+	/* The status phase of the SET_ADDRESS request is completed ... */
+	if (_req->status == 0) {
+		/* ... without any errors -> Signaled the state to the core. */
+		usb_gadget_set_state(&ep->udc->gadget, USB_STATE_ADDRESS);
+	}
+
+	/* In case of request failure, there is no need to revert the address
+	 * value set to the hardware as the hardware will take care of the
+	 * value only if the status stage is completed normally.
+	 */
+}
+
+static int usbf_req_set_address(struct usbf_udc *udc,
+				const struct usb_ctrlrequest *ctrlrequest)
+{
+	u16 wLength;
+	u16 wValue;
+	u16 wIndex;
+	u32 addr;
+
+	wValue  = le16_to_cpu(ctrlrequest->wValue);
+	wLength = le16_to_cpu(ctrlrequest->wLength);
+	wIndex  = le16_to_cpu(ctrlrequest->wIndex);
+
+	if (ctrlrequest->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
+		goto delegate;
+
+	if ((wIndex != 0) || (wLength != 0) || (wValue > 127))
+		return -EINVAL;
+
+	addr = wValue;
+	/* The hardware will take care of this USB address after the status
+	 * stage of the SET_ADDRESS request is completed normally.
+	 * It is safe to write it now
+	 */
+	usbf_reg_writel(udc, USBF_REG_USB_ADDRESS, USBF_USB_SET_USB_ADDR(addr));
+
+	/* Queued the status request */
+	usbf_ep0_fill_req(&udc->ep[0], &udc->setup_reply, NULL, 0,
+			  usbf_ep0_req_set_address_complete);
+	usbf_ep0_queue(&udc->ep[0], &udc->setup_reply, GFP_ATOMIC);
+
+	return 0;
+
+delegate:
+	return usbf_req_delegate(udc, ctrlrequest);
+}
+
+static int usbf_req_set_configuration(struct usbf_udc *udc,
+				      const struct usb_ctrlrequest *ctrlrequest)
+{
+	u16 wLength;
+	u16 wValue;
+	u16 wIndex;
+	int ret;
+
+	ret = usbf_req_delegate(udc, ctrlrequest);
+	if (ret)
+		return ret;
+
+	wValue  = le16_to_cpu(ctrlrequest->wValue);
+	wLength = le16_to_cpu(ctrlrequest->wLength);
+	wIndex  = le16_to_cpu(ctrlrequest->wIndex);
+
+	if ((ctrlrequest->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE)) ||
+	    (wIndex != 0) || (wLength != 0)) {
+		/* No error detected by driver->setup() but it is not an USB2.0
+		 * Ch9 SET_CONFIGURATION.
+		 * Nothing more to do
+		 */
+		return 0;
+	}
+
+	if (wValue & 0x00FF) {
+		usbf_reg_bitset(udc, USBF_REG_USB_CONTROL, USBF_USB_CONF);
+	} else {
+		usbf_reg_bitclr(udc, USBF_REG_USB_CONTROL, USBF_USB_CONF);
+		/* Go back to Address State */
+		spin_unlock(&udc->lock);
+		usb_gadget_set_state(&udc->gadget, USB_STATE_ADDRESS);
+		spin_lock(&udc->lock);
+	}
+
+	return 0;
+}
+
+static int usbf_handle_ep0_setup(struct usbf_ep *ep0)
+{
+	union {
+		struct usb_ctrlrequest ctrlreq;
+		u32 raw[2];
+	} crq;
+	struct usbf_udc *udc = ep0->udc;
+	int ret;
+
+	/* Read setup data (ie the USB control request) */
+	crq.raw[0] = usbf_reg_readl(udc, USBF_REG_SETUP_DATA0);
+	crq.raw[1] = usbf_reg_readl(udc, USBF_REG_SETUP_DATA1);
+
+	TRACEEP(ep0,
+		"req%02x.%02x, wValue 0x%04x, wIndex 0x%04x, wLength 0x%04x\n",
+		crq.ctrlreq.bRequestType, crq.ctrlreq.bRequest,
+		crq.ctrlreq.wValue, crq.ctrlreq.wIndex, crq.ctrlreq.wLength);
+
+	/* Set current EP0 state according to the received request */
+	if (crq.ctrlreq.wLength) {
+		if (crq.ctrlreq.bRequestType & USB_DIR_IN) {
+			udc->ep0state = EP0_IN_DATA_PHASE;
+			usbf_ep_reg_clrset(ep0, USBF_REG_EP0_CONTROL,
+				USBF_EP0_INAK,
+				USBF_EP0_INAK_EN);
+			ep0->is_in = 1;
+		} else {
+			udc->ep0state = EP0_OUT_DATA_PHASE;
+			usbf_ep_reg_bitclr(ep0, USBF_REG_EP0_CONTROL,
+				USBF_EP0_ONAK);
+			ep0->is_in = 0;
+		}
+	} else {
+		udc->ep0state = EP0_IN_STATUS_START_PHASE;
+		ep0->is_in = 1;
+	}
+
+	/* We starts a new control transfer -> Clear the delayed status flag */
+	ep0->delayed_status = 0;
+
+	if ((crq.ctrlreq.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) {
+		/* This is not a USB standard request -> delelate */
+		goto delegate;
+	}
+
+	switch (crq.ctrlreq.bRequest) {
+	case USB_REQ_GET_STATUS:
+		ret = usbf_req_get_status(udc, &crq.ctrlreq);
+		break;
+
+	case USB_REQ_CLEAR_FEATURE:
+		ret = usbf_req_clear_set_feature(udc, &crq.ctrlreq, false);
+		break;
+
+	case USB_REQ_SET_FEATURE:
+		ret = usbf_req_clear_set_feature(udc, &crq.ctrlreq, true);
+		break;
+
+	case USB_REQ_SET_ADDRESS:
+		ret = usbf_req_set_address(udc, &crq.ctrlreq);
+		break;
+
+	case USB_REQ_SET_CONFIGURATION:
+		ret = usbf_req_set_configuration(udc, &crq.ctrlreq);
+		break;
+
+	default:
+		goto delegate;
+	}
+
+	return ret;
+
+delegate:
+	return usbf_req_delegate(udc, &crq.ctrlreq);
+}
+
+static int usbf_handle_ep0_data_status(struct usbf_ep *ep0,
+				  const char *ep0state_name,
+				  enum usbf_ep0state next_ep0state)
+{
+	struct usbf_udc *udc = ep0->udc;
+	int ret;
+
+	ret = usbf_ep_process_queue(ep0);
+	switch (ret) {
+	case -ENOENT:
+		dev_err(udc->dev,
+			"no request available for ep0 %s phase\n",
+			ep0state_name);
+		break;
+	case -EINPROGRESS:
+		/* More data needs to be processed */
+		ret = 0;
+		break;
+	case 0:
+		/* All requests in the queue are processed */
+		udc->ep0state = next_ep0state;
+		break;
+	default:
+		dev_err(udc->dev,
+			"process queue failed for ep0 %s phase (%d)\n",
+			ep0state_name, ret);
+		break;
+	}
+	return ret;
+}
+
+static int usbf_handle_ep0_out_status_start(struct usbf_ep *ep0)
+{
+	struct usbf_udc *udc = ep0->udc;
+	struct usbf_req *req;
+
+	usbf_ep_reg_clrset(ep0, USBF_REG_EP0_CONTROL,
+				USBF_EP0_ONAK,
+				USBF_EP0_PIDCLR);
+	ep0->is_in = 0;
+
+	req = list_first_entry_or_null(&ep0->queue, struct usbf_req, queue);
+	if (!req) {
+		usbf_ep0_fill_req(ep0, &udc->setup_reply, NULL, 0, NULL);
+		usbf_ep0_queue(ep0, &udc->setup_reply, GFP_ATOMIC);
+	} else {
+		if (req->req.length) {
+			dev_err(udc->dev,
+				"queued request length %u for ep0 out status phase\n",
+				req->req.length);
+		}
+	}
+	udc->ep0state = EP0_OUT_STATUS_PHASE;
+	return 0;
+}
+
+static int usbf_handle_ep0_in_status_start(struct usbf_ep *ep0)
+{
+	struct usbf_udc *udc = ep0->udc;
+	struct usbf_req *req;
+	int ret;
+
+	usbf_ep_reg_clrset(ep0, USBF_REG_EP0_CONTROL,
+				USBF_EP0_INAK,
+				USBF_EP0_INAK_EN | USBF_EP0_PIDCLR);
+	ep0->is_in = 1;
+
+	/* Queue request for status if needed */
+	req = list_first_entry_or_null(&ep0->queue, struct usbf_req, queue);
+	if (!req) {
+		if (ep0->delayed_status) {
+			TRACEEP(ep0,
+				"EP0_IN_STATUS_START_PHASE ep0->delayed_status set\n");
+			udc->ep0state = EP0_IN_STATUS_PHASE;
+			return 0;
+		}
+
+		usbf_ep0_fill_req(ep0, &udc->setup_reply, NULL,
+			  0, NULL);
+		usbf_ep0_queue(ep0, &udc->setup_reply,
+			       GFP_ATOMIC);
+
+		req = list_first_entry_or_null(&ep0->queue, struct usbf_req, queue);
+	} else {
+		if (req->req.length) {
+			dev_err(udc->dev,
+				"queued request length %u for ep0 in status phase\n",
+				req->req.length);
+		}
+	}
+
+	ret = usbf_ep0_pio_in(ep0, req);
+	if (ret != -EINPROGRESS) {
+		usbf_ep_req_done(ep0, req, ret);
+		udc->ep0state = EP0_IN_STATUS_END_PHASE;
+		return 0;
+	}
+
+	udc->ep0state = EP0_IN_STATUS_PHASE;
+	return 0;
+}
+
+static void usbf_ep0_interrupt(struct usbf_ep *ep0)
+{
+	struct usbf_udc *udc = ep0->udc;
+	u32 sts, prev_sts;
+	int prev_ep0state;
+	int ret;
+
+	ep0->status = usbf_ep_reg_readl(ep0, USBF_REG_EP0_STATUS);
+	usbf_ep_reg_writel(ep0, USBF_REG_EP0_STATUS, ~ep0->status);
+
+	TRACEEP(ep0, "ep0 status=0x%08x, enable=%08x\n, ctrl=0x%08x\n",
+		ep0->status,
+		usbf_ep_reg_readl(ep0, USBF_REG_EP0_INT_ENA),
+		usbf_ep_reg_readl(ep0, USBF_REG_EP0_CONTROL));
+
+	sts = ep0->status & (USBF_EP0_SETUP_INT | USBF_EP0_IN_INT | USBF_EP0_OUT_INT |
+			     USBF_EP0_OUT_NULL_INT | USBF_EP0_STG_START_INT |
+			     USBF_EP0_STG_END_INT);
+
+	ret = 0;
+	do {
+		TRACEEP(ep0, "udc->ep0state=%d\n", udc->ep0state);
+
+		prev_sts = sts;
+		prev_ep0state = udc->ep0state;
+		switch (udc->ep0state) {
+		case EP0_IDLE:
+			if (!(sts & USBF_EP0_SETUP_INT))
+				break;
+
+			sts &= ~USBF_EP0_SETUP_INT;
+			TRACEEP(ep0, "handle setup\n");
+			ret = usbf_handle_ep0_setup(ep0);
+			break;
+
+		case EP0_IN_DATA_PHASE:
+			if (!(sts & USBF_EP0_IN_INT))
+				break;
+
+			sts &= ~USBF_EP0_IN_INT;
+			TRACEEP(ep0, "handle in data phase\n");
+			ret = usbf_handle_ep0_data_status(ep0,
+				"in data", EP0_OUT_STATUS_START_PHASE);
+			break;
+
+		case EP0_OUT_STATUS_START_PHASE:
+			if (!(sts & USBF_EP0_STG_START_INT))
+				break;
+
+			sts &= ~USBF_EP0_STG_START_INT;
+			TRACEEP(ep0, "handle out status start phase\n");
+			ret = usbf_handle_ep0_out_status_start(ep0);
+			break;
+
+		case EP0_OUT_STATUS_PHASE:
+			if (!(sts & (USBF_EP0_OUT_INT | USBF_EP0_OUT_NULL_INT)))
+				break;
+
+			sts &= ~(USBF_EP0_OUT_INT | USBF_EP0_OUT_NULL_INT);
+			TRACEEP(ep0, "handle out status phase\n");
+			ret = usbf_handle_ep0_data_status(ep0,
+				"out status",
+				EP0_OUT_STATUS_END_PHASE);
+			break;
+
+		case EP0_OUT_STATUS_END_PHASE:
+			if (!(sts & (USBF_EP0_STG_END_INT | USBF_EP0_SETUP_INT)))
+				break;
+
+			sts &= ~USBF_EP0_STG_END_INT;
+			TRACEEP(ep0, "handle out status end phase\n");
+			udc->ep0state = EP0_IDLE;
+			break;
+
+		case EP0_OUT_DATA_PHASE:
+			if (!(sts & (USBF_EP0_OUT_INT | USBF_EP0_OUT_NULL_INT)))
+				break;
+
+			sts &= ~(USBF_EP0_OUT_INT | USBF_EP0_OUT_NULL_INT);
+			TRACEEP(ep0, "handle out data phase\n");
+			ret = usbf_handle_ep0_data_status(ep0,
+				"out data", EP0_IN_STATUS_START_PHASE);
+			break;
+
+		case EP0_IN_STATUS_START_PHASE:
+			if (!(sts & USBF_EP0_STG_START_INT))
+				break;
+
+			sts &= ~USBF_EP0_STG_START_INT;
+			TRACEEP(ep0, "handle in status start phase\n");
+			ret = usbf_handle_ep0_in_status_start(ep0);
+			break;
+
+		case EP0_IN_STATUS_PHASE:
+			if (!(sts & USBF_EP0_IN_INT))
+				break;
+
+			sts &= ~USBF_EP0_IN_INT;
+			TRACEEP(ep0, "handle in status phase\n");
+			ret = usbf_handle_ep0_data_status(ep0,
+				"in status", EP0_IN_STATUS_END_PHASE);
+			break;
+
+		case EP0_IN_STATUS_END_PHASE:
+			if (!(sts & (USBF_EP0_STG_END_INT | USBF_EP0_SETUP_INT)))
+				break;
+
+			sts &= ~USBF_EP0_STG_END_INT;
+			TRACEEP(ep0, "handle in status end\n");
+			udc->ep0state = EP0_IDLE;
+			break;
+
+		default:
+			udc->ep0state = EP0_IDLE;
+			break;
+		}
+
+		if (ret) {
+			TRACEEP(ep0, "failed (%d)\n", ret);
+			/* Failure -> stall.
+			 * This stall state will be automatically cleared when
+			 * the IP receives the next SETUP packet
+			 */
+			usbf_ep_stall(ep0, true);
+
+			/* Remove anything that was pending */
+			usbf_ep_nuke(ep0, -EPROTO);
+
+			udc->ep0state = EP0_IDLE;
+			break;
+		}
+
+	} while ((prev_ep0state != udc->ep0state) || (prev_sts != sts));
+
+	TRACEEP(ep0, "done udc->ep0state=%d, status=0x%08x. next=0x%08x\n",
+		udc->ep0state, sts,
+		usbf_ep_reg_readl(ep0, USBF_REG_EP0_STATUS));
+}
+
+static void usbf_epn_process_queue(struct usbf_ep *epn)
+{
+	int ret;
+
+	ret = usbf_ep_process_queue(epn);
+	switch (ret) {
+	case -ENOENT:
+		dev_warn(epn->udc->dev, "ep%u %s, no request available\n",
+			epn->id, epn->is_in ? "in" : "out");
+		break;
+	case -EINPROGRESS:
+		/* More data needs to be processed */
+		ret = 0;
+		break;
+	case 0:
+		/* All requests in the queue are processed */
+		break;
+	default:
+		dev_err(epn->udc->dev, "ep%u %s, process queue failed (%d)\n",
+			epn->id, epn->is_in ? "in" : "out", ret);
+		break;
+	}
+
+	if (ret) {
+		TRACEEP(epn, "ep%u %s failed (%d)\n", epn->id,
+			epn->is_in ? "in" : "out", ret);
+		usbf_ep_stall(epn, true);
+		usbf_ep_nuke(epn, ret);
+	}
+}
+
+static void usbf_epn_interrupt(struct usbf_ep *epn)
+{
+	u32 sts;
+	u32 ena;
+
+	epn->status = usbf_ep_reg_readl(epn, USBF_REG_EPN_STATUS);
+	ena = usbf_ep_reg_readl(epn, USBF_REG_EPN_INT_ENA);
+	usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, ~(epn->status & ena));
+
+	TRACEEP(epn, "ep%u %s status=0x%08x, enable=%08x\n, ctrl=0x%08x\n",
+		epn->id, epn->is_in ? "in" : "out", epn->status, ena,
+		usbf_ep_reg_readl(epn, USBF_REG_EPN_CONTROL));
+
+	if (epn->disabled) {
+		dev_warn(epn->udc->dev, "ep%u %s, interrupt while disabled\n",
+			epn->id, epn->is_in ? "in" : "out");
+		return;
+	}
+
+	sts = epn->status & ena;
+
+	if (sts & (USBF_EPN_IN_END_INT | USBF_EPN_IN_INT)) {
+		sts &= ~(USBF_EPN_IN_END_INT | USBF_EPN_IN_INT);
+		TRACEEP(epn, "ep%u %s process queue (in interrupts)\n",
+			epn->id, epn->is_in ? "in" : "out");
+		usbf_epn_process_queue(epn);
+	}
+
+	if (sts & (USBF_EPN_OUT_END_INT | USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT)) {
+		sts &= ~(USBF_EPN_OUT_END_INT | USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT);
+		TRACEEP(epn, "ep%u %s process queue (out interrupts)\n",
+			epn->id, epn->is_in ? "in" : "out");
+		usbf_epn_process_queue(epn);
+	}
+
+	TRACEEP(epn, "ep%u %s done status=0x%08x. next=0x%08x\n",
+		epn->id, epn->is_in ? "in" : "out",
+		sts, usbf_ep_reg_readl(epn, USBF_REG_EPN_STATUS));
+}
+
+static void usbf_ep_reset(struct usbf_ep *ep)
+{
+	ep->status = 0;
+	/* Remove anything that was pending */
+	usbf_ep_nuke(ep, -ESHUTDOWN);
+}
+
+static void usbf_reset(struct usbf_udc *udc)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(udc->ep); i++) {
+		if (udc->ep[i].disabled)
+			continue;
+
+		usbf_ep_reset(&udc->ep[i]);
+	}
+
+	if (usbf_reg_readl(udc, USBF_REG_USB_STATUS) & USBF_USB_SPEED_MODE)
+		udc->gadget.speed = USB_SPEED_HIGH;
+	else
+		udc->gadget.speed = USB_SPEED_FULL;
+
+	/* Remote wakeup feature must be disabled on USB bus reset */
+	udc->is_remote_wakeup = false;
+
+	/* Enable endpoint zero */
+	usbf_ep0_enable(&udc->ep[0]);
+
+	if (udc->driver) {
+		/* Signal the reset */
+		spin_unlock(&udc->lock);
+		usb_gadget_udc_reset(&udc->gadget, udc->driver);
+		spin_lock(&udc->lock);
+	}
+}
+
+static void usbf_driver_suspend(struct usbf_udc *udc)
+{
+	if (udc->is_usb_suspended) {
+		TRACE("already suspended\n");
+		return;
+	}
+
+	TRACE("do usb suspend\n");
+	udc->is_usb_suspended = true;
+
+	if (udc->driver && udc->driver->suspend) {
+		spin_unlock(&udc->lock);
+		udc->driver->suspend(&udc->gadget);
+		spin_lock(&udc->lock);
+
+		/* The datasheet tells to set the USB_CONTROL register SUSPEND
+		 * bit when the USB bus suspend is detected.
+		 * This bit stops the clocks (clocks for EPC, SIE, USBPHY) but
+		 * these clocks seems not used only by the USB device. Some
+		 * UARTs can be lost ...
+		 * So, do not set the USB_CONTROL register SUSPEND bit.
+		 */
+	}
+}
+
+static void usbf_driver_resume(struct usbf_udc *udc)
+{
+	if (!udc->is_usb_suspended)
+		return;
+
+	TRACE("do usb resume\n");
+	udc->is_usb_suspended = false;
+
+	if (udc->driver && udc->driver->resume) {
+		spin_unlock(&udc->lock);
+		udc->driver->resume(&udc->gadget);
+		spin_lock(&udc->lock);
+	}
+}
+
+static irqreturn_t usbf_epc_irq(int irq, void *_udc)
+{
+	struct usbf_udc *udc = (struct usbf_udc *)_udc;
+	unsigned long flags;
+	struct usbf_ep *ep;
+	u32 int_sts;
+	u32 int_en;
+	int i;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	int_en = usbf_reg_readl(udc, USBF_REG_USB_INT_ENA);
+	int_sts = usbf_reg_readl(udc, USBF_REG_USB_INT_STA) & int_en;
+	usbf_reg_writel(udc, USBF_REG_USB_INT_STA, ~int_sts);
+
+	TRACE("int_sts=0x%08x\n", int_sts);
+
+	if (int_sts & USBF_USB_RSUM_INT) {
+		TRACE("handle resume\n");
+		usbf_driver_resume(udc);
+	}
+
+	if (int_sts & USBF_USB_USB_RST_INT) {
+		TRACE("handle bus reset\n");
+		usbf_driver_resume(udc);
+		usbf_reset(udc);
+	}
+
+	if (int_sts & USBF_USB_SPEED_MODE_INT) {
+		if (usbf_reg_readl(udc, USBF_REG_USB_STATUS) & USBF_USB_SPEED_MODE)
+			udc->gadget.speed = USB_SPEED_HIGH;
+		else
+			udc->gadget.speed = USB_SPEED_FULL;
+		TRACE("handle speed change (%s)\n",
+		      udc->gadget.speed == USB_SPEED_HIGH ? "High" : "Full");
+	}
+
+	if (int_sts & USBF_USB_EPN_INT(0)) {
+		usbf_driver_resume(udc);
+		usbf_ep0_interrupt(&udc->ep[0]);
+	}
+
+	for (i = 1; i < ARRAY_SIZE(udc->ep); i++) {
+		ep = &udc->ep[i];
+
+		if (int_sts & USBF_USB_EPN_INT(i)) {
+			usbf_driver_resume(udc);
+			usbf_epn_interrupt(ep);
+		}
+	}
+
+	if (int_sts & USBF_USB_SPND_INT) {
+		TRACE("handle suspend\n");
+		usbf_driver_suspend(udc);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t usbf_ahb_epc_irq(int irq, void *_udc)
+{
+	struct usbf_udc *udc = (struct usbf_udc *)_udc;
+	unsigned long flags;
+	struct usbf_ep *epn;
+	u32 sysbint;
+	void (*ep_action)(struct usbf_ep *epn);
+	int i;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Read and ack interrupts */
+	sysbint = usbf_reg_readl(udc, USBF_REG_AHBBINT);
+	usbf_reg_writel(udc, USBF_REG_AHBBINT, sysbint);
+
+	if ((sysbint & USBF_SYS_VBUS_INT) == USBF_SYS_VBUS_INT) {
+		if (usbf_reg_readl(udc, USBF_REG_EPCTR) & USBF_SYS_VBUS_LEVEL) {
+			TRACE("handle vbus (1)\n");
+			spin_unlock(&udc->lock);
+			usb_udc_vbus_handler(&udc->gadget, true);
+			usb_gadget_set_state(&udc->gadget, USB_STATE_POWERED);
+			spin_lock(&udc->lock);
+		} else {
+			TRACE("handle vbus (0)\n");
+			udc->is_usb_suspended = false;
+			spin_unlock(&udc->lock);
+			usb_udc_vbus_handler(&udc->gadget, false);
+			usb_gadget_set_state(&udc->gadget,
+					     USB_STATE_NOTATTACHED);
+			spin_lock(&udc->lock);
+		}
+	}
+
+	for (i = 1; i < ARRAY_SIZE(udc->ep); i++) {
+		if (sysbint & USBF_SYS_DMA_ENDINT_EPN(i)) {
+			epn = &udc->ep[i];
+			TRACEEP(epn,
+				"ep%u handle DMA complete. action=%ps\n",
+				epn->id, epn->bridge_on_dma_end);
+			ep_action = epn->bridge_on_dma_end;
+			if (ep_action) {
+				epn->bridge_on_dma_end = NULL;
+				ep_action(epn);
+			}
+		}
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int usbf_udc_start(struct usb_gadget *gadget,
+			  struct usb_gadget_driver *driver)
+{
+	struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget);
+	unsigned long flags;
+
+	dev_info(udc->dev, "start (driver '%s')\n", driver->driver.name);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* hook up the driver */
+	udc->driver = driver;
+
+	/* Enable VBUS interrupt */
+	usbf_reg_writel(udc, USBF_REG_AHBBINTEN, USBF_SYS_VBUS_INTEN);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int usbf_udc_stop(struct usb_gadget *gadget)
+{
+	struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Disable VBUS interrupt */
+	usbf_reg_writel(udc, USBF_REG_AHBBINTEN, 0);
+
+	udc->driver = NULL;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	dev_info(udc->dev, "stopped\n");
+
+	return 0;
+}
+
+static int usbf_get_frame(struct usb_gadget *gadget)
+{
+	struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget);
+
+	return USBF_USB_GET_FRAME(usbf_reg_readl(udc, USBF_REG_USB_ADDRESS));
+}
+
+static void usbf_attach(struct usbf_udc *udc)
+{
+	/* Enable USB signal to Function PHY
+	 * D+ signal Pull-up
+	 * Disable endpoint 0, it will be automatically enable when a USB reset
+	 * is received.
+	 * Disable the other endpoints
+	 */
+	usbf_reg_clrset(udc, USBF_REG_USB_CONTROL,
+		USBF_USB_CONNECTB | USBF_USB_DEFAULT | USBF_USB_CONF,
+		USBF_USB_PUE2);
+
+	/* Enable reset and mode change interrupts */
+	usbf_reg_bitset(udc, USBF_REG_USB_INT_ENA,
+		USBF_USB_USB_RST_EN | USBF_USB_SPEED_MODE_EN | USBF_USB_RSUM_EN | USBF_USB_SPND_EN);
+}
+
+static void usbf_detach(struct usbf_udc *udc)
+{
+	int i;
+
+	/* Disable interrupts */
+	usbf_reg_writel(udc, USBF_REG_USB_INT_ENA, 0);
+
+	for (i = 0; i < ARRAY_SIZE(udc->ep); i++) {
+		if (udc->ep[i].disabled)
+			continue;
+
+		usbf_ep_reset(&udc->ep[i]);
+	}
+
+	/* Disable USB signal to Function PHY
+	 * Do not Pull-up D+ signal
+	 * Disable endpoint 0
+	 * Disable the other endpoints
+	 */
+	usbf_reg_clrset(udc, USBF_REG_USB_CONTROL,
+		USBF_USB_PUE2 | USBF_USB_DEFAULT | USBF_USB_CONF,
+		USBF_USB_CONNECTB);
+}
+
+static int usbf_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget);
+	unsigned long flags;
+
+	TRACE("is_on=%d\n", is_on);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (is_on)
+		usbf_attach(udc);
+	else
+		usbf_detach(udc);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int usbf_udc_set_selfpowered(struct usb_gadget *gadget,
+				    int is_selfpowered)
+{
+	struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	gadget->is_selfpowered = (is_selfpowered != 0);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int usbf_udc_wakeup(struct usb_gadget *gadget)
+{
+	struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (!udc->is_remote_wakeup) {
+		TRACE("remote wakeup not allowed\n");
+		ret = -EINVAL;
+		goto end;
+	}
+
+	TRACE("do wakeup\n");
+
+	/* Send the resume signal */
+	usbf_reg_bitset(udc, USBF_REG_USB_CONTROL, USBF_USB_RSUM_IN);
+	usbf_reg_bitclr(udc, USBF_REG_USB_CONTROL, USBF_USB_RSUM_IN);
+
+	ret = 0;
+end:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return ret;
+}
+
+static struct usb_gadget_ops usbf_gadget_ops = {
+	.get_frame = usbf_get_frame,
+	.pullup = usbf_pullup,
+	.udc_start = usbf_udc_start,
+	.udc_stop = usbf_udc_stop,
+	.set_selfpowered = usbf_udc_set_selfpowered,
+	.wakeup = usbf_udc_wakeup,
+};
+
+static int usbf_epn_check(struct usbf_ep *epn)
+{
+	const char *type_txt;
+	const char *buf_txt;
+	int ret = 0;
+	u32 ctrl;
+
+	ctrl = usbf_ep_reg_readl(epn, USBF_REG_EPN_CONTROL);
+
+	switch (ctrl & USBF_EPN_MODE_MASK) {
+	case USBF_EPN_MODE_BULK:
+		type_txt = "bulk";
+		if (epn->ep.caps.type_control || epn->ep.caps.type_iso ||
+		    !epn->ep.caps.type_bulk || epn->ep.caps.type_int) {
+			dev_err(epn->udc->dev,
+				"ep%u caps mismatch, bulk expected\n", epn->id);
+			ret = -EINVAL;
+		}
+		break;
+	case USBF_EPN_MODE_INTR:
+		type_txt = "intr";
+		if (epn->ep.caps.type_control || epn->ep.caps.type_iso ||
+		    epn->ep.caps.type_bulk || !epn->ep.caps.type_int) {
+			dev_err(epn->udc->dev,
+				"ep%u caps mismatch, int expected\n", epn->id);
+			ret = -EINVAL;
+		}
+		break;
+	case USBF_EPN_MODE_ISO:
+		type_txt = "iso";
+		if (epn->ep.caps.type_control || !epn->ep.caps.type_iso ||
+		    epn->ep.caps.type_bulk || epn->ep.caps.type_int) {
+			dev_err(epn->udc->dev,
+				"ep%u caps mismatch, iso expected\n", epn->id);
+			ret = -EINVAL;
+		}
+		break;
+	default:
+		type_txt = "unknown";
+		dev_err(epn->udc->dev, "ep%u unknown type\n", epn->id);
+		ret = -EINVAL;
+		break;
+	}
+
+	if (ctrl & USBF_EPN_BUF_TYPE_DOUBLE) {
+		buf_txt = "double";
+		if (!usbf_ep_info[epn->id].is_double) {
+			dev_err(epn->udc->dev,
+				"ep%u buffer mismatch, double expected\n",
+				epn->id);
+			ret = -EINVAL;
+		}
+	} else {
+		buf_txt = "single";
+		if (usbf_ep_info[epn->id].is_double) {
+			dev_err(epn->udc->dev,
+				"ep%u buffer mismatch, single expected\n",
+				epn->id);
+			ret = -EINVAL;
+		}
+	}
+
+	dev_dbg(epn->udc->dev, "ep%u (%s) %s, %s buffer %u, checked %s\n",
+		 epn->id, epn->ep.name, type_txt, buf_txt,
+		 epn->ep.maxpacket_limit, ret ? "failed" : "ok");
+
+	return ret;
+}
+
+static int usbf_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usbf_udc *udc;
+	struct usbf_ep *ep;
+	unsigned int i;
+	int irq;
+	int ret;
+
+	udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, udc);
+
+	udc->dev = dev;
+	spin_lock_init(&udc->lock);
+
+	udc->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(udc->regs))
+		return PTR_ERR(udc->regs);
+
+	devm_pm_runtime_enable(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret < 0)
+		return ret;
+
+	dev_info(dev, "USBF version: %08x\n",
+		usbf_reg_readl(udc, USBF_REG_USBSSVER));
+
+	/* Resetting the PLL is handled via the clock driver as it has common
+	 * registers with USB Host
+	 */
+	usbf_reg_bitclr(udc, USBF_REG_EPCTR, USBF_SYS_EPC_RST);
+
+	/* modify in register gadget process */
+	udc->gadget.speed = USB_SPEED_FULL;
+	udc->gadget.max_speed = USB_SPEED_HIGH;
+	udc->gadget.ops = &usbf_gadget_ops;
+
+	udc->gadget.name = dev->driver->name;
+	udc->gadget.dev.parent = dev;
+	udc->gadget.ep0 = &udc->ep[0].ep;
+
+	/* The hardware DMA controller needs dma addresses aligned on 32bit.
+	 * A fallback to pio is done if DMA addresses are not aligned.
+	 */
+	udc->gadget.quirk_avoids_skb_reserve = 1;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	/* we have a canned request structure to allow sending packets as reply
+	 * to get_status requests
+	 */
+	INIT_LIST_HEAD(&udc->setup_reply.queue);
+
+	for (i = 0; i < ARRAY_SIZE(udc->ep); i++) {
+		ep = &udc->ep[i];
+
+		if (!(usbf_reg_readl(udc, USBF_REG_USBSSCONF) &
+		      USBF_SYS_EP_AVAILABLE(i))) {
+			continue;
+		}
+
+		INIT_LIST_HEAD(&ep->queue);
+
+		ep->id = i;
+		ep->disabled = 1;
+		ep->udc = udc;
+		ep->ep.ops = &usbf_ep_ops;
+		ep->ep.name = usbf_ep_info[i].name;
+		ep->ep.caps = usbf_ep_info[i].caps;
+		usb_ep_set_maxpacket_limit(&ep->ep,
+					   usbf_ep_info[i].maxpacket_limit);
+
+		if (ep->id == 0) {
+			ep->regs = ep->udc->regs + USBF_BASE_EP0;
+		} else {
+			ep->regs = ep->udc->regs + USBF_BASE_EPN(ep->id - 1);
+			ret = usbf_epn_check(ep);
+			if (ret)
+				return ret;
+			if (usbf_reg_readl(udc, USBF_REG_USBSSCONF) &
+			    USBF_SYS_DMA_AVAILABLE(i)) {
+				ep->dma_regs = ep->udc->regs +
+					       USBF_BASE_DMA_EPN(ep->id - 1);
+			}
+			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+		}
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	ret = devm_request_irq(dev, irq, usbf_epc_irq, 0, "usbf-epc", udc);
+	if (ret) {
+		dev_err(dev, "cannot request irq %d err %d\n", irq, ret);
+		return ret;
+	}
+
+	irq = platform_get_irq(pdev, 1);
+	if (irq < 0)
+		return irq;
+	ret = devm_request_irq(dev, irq, usbf_ahb_epc_irq, 0, "usbf-ahb-epc", udc);
+	if (ret) {
+		dev_err(dev, "cannot request irq %d err %d\n", irq, ret);
+		return ret;
+	}
+
+	usbf_reg_bitset(udc, USBF_REG_AHBMCTR, USBF_SYS_WBURST_TYPE);
+
+	usbf_reg_bitset(udc, USBF_REG_USB_CONTROL,
+		USBF_USB_INT_SEL | USBF_USB_SOF_RCV | USBF_USB_SOF_CLK_MODE);
+
+	ret = usb_add_gadget_udc(dev, &udc->gadget);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int usbf_remove(struct platform_device *pdev)
+{
+	struct usbf_udc *udc = platform_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&udc->gadget);
+
+	pm_runtime_put(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id usbf_match[] = {
+	{ .compatible = "renesas,rzn1-usbf" },
+	{} /* sentinel */
+};
+MODULE_DEVICE_TABLE(of, usbf_match);
+
+static struct platform_driver udc_driver = {
+	.driver = {
+		.name = "usbf_renesas",
+		.owner = THIS_MODULE,
+		.of_match_table = usbf_match,
+	},
+	.probe          = usbf_probe,
+	.remove         = usbf_remove,
+};
+
+module_platform_driver(udc_driver);
+
+MODULE_AUTHOR("Herve Codina <herve.codina@bootlin.com>");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 & RZ/N1 USB Function driver");
+MODULE_LICENSE("GPL");