| Message ID | 20221226114513.4569-1-pali@kernel.org (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | [v4,1/3] dt-bindings: reset: syscon-reboot: Add priority property | expand |
On 26/12/2022 12:45, Pali Rohár wrote: > This new optional priority property allows to specify custom priority level > of reset device. Prior this change priority level was hardcoded to 192 and > not possible to specify or change. Specifying other value is needed for > some boards. Default level when not specified stays at 192 as before. > > Signed-off-by: Pali Rohár <pali@kernel.org> > > --- > Changes in v4: > * Use restart-handler.yaml Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Mon, 26 Dec 2022 12:45:11 +0100, Pali Rohár wrote: > This new optional priority property allows to specify custom priority level > of reset device. Prior this change priority level was hardcoded to 192 and > not possible to specify or change. Specifying other value is needed for > some boards. Default level when not specified stays at 192 as before. > > Signed-off-by: Pali Rohár <pali@kernel.org> > > --- > Changes in v4: > * Use restart-handler.yaml > > Changes in v3: > * Add explanation into commit message > > Changes in v2: > * Change sint32 to int32 > * Add default > --- > .../devicetree/bindings/power/reset/syscon-reboot.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml:57:1: [error] duplication of key "allOf" in mapping (key-duplicates) dtschema/dtc warnings/errors: make[1]: *** Deleting file 'Documentation/devicetree/bindings/power/reset/syscon-reboot.example.dts' Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml:57:1: found duplicate key "allOf" with value "[]" (original value: "[]") make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/power/reset/syscon-reboot.example.dts] Error 1 make[1]: *** Waiting for unfinished jobs.... ./Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/power/reset/syscon-reboot.yaml ./Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/power/reset/syscon-reboot.yaml ./Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml:57:1: found duplicate key "allOf" with value "[]" (original value: "[]") /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml: ignoring, error parsing file make: *** [Makefile:1508: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): Documentation/cdrom/packet-writing.rst: Documentation/ABI/testing/sysfs-class-pktcdvd Documentation/cdrom/packet-writing.rst: Documentation/ABI/testing/debugfs-pktcdvd tools/power/cpupower/man/cpupower-powercap-info.1: Documentation/power/powercap/powercap.txt See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221226114513.4569-1-pali@kernel.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
Reminder: Any plan how to handle these patches? On Monday 26 December 2022 12:45:11 Pali Rohár wrote: > This new optional priority property allows to specify custom priority level > of reset device. Prior this change priority level was hardcoded to 192 and > not possible to specify or change. Specifying other value is needed for > some boards. Default level when not specified stays at 192 as before. > > Signed-off-by: Pali Rohár <pali@kernel.org> > > --- > Changes in v4: > * Use restart-handler.yaml > > Changes in v3: > * Add explanation into commit message > > Changes in v2: > * Change sint32 to int32 > * Add default > --- > .../devicetree/bindings/power/reset/syscon-reboot.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > index da2509724812..f721bdf63a98 100644 > --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > @@ -19,6 +19,9 @@ description: |+ > sub-node of a "syscon", "simple-mfd" node. Though the regmap property > pointing to the system controller node is also supported. > > +allOf: > + - $ref: restart-handler.yaml# > + > properties: > compatible: > const: syscon-reboot > @@ -42,6 +45,9 @@ properties: > $ref: /schemas/types.yaml#/definitions/uint32 > description: The reset value written to the reboot register (32 bit access). > > + priority: > + default: 192 > + > required: > - compatible > - offset > -- > 2.20.1 >
Hi, On Sun, Jan 22, 2023 at 12:27:44PM +0100, Pali Rohár wrote: > On Monday 26 December 2022 12:45:11 Pali Rohár wrote: > > This new optional priority property allows to specify custom priority level > > of reset device. Prior this change priority level was hardcoded to 192 and > > not possible to specify or change. Specifying other value is needed for > > some boards. Default level when not specified stays at 192 as before. > > > > Signed-off-by: Pali Rohár <pali@kernel.org> > > Reminder: Any plan how to handle these patches? Please don't top-post :) Sorry, I'm a bit slow with processing patches this cycle. Technically this was also throwing a DT warning reported by the bot, so I expected a new version. Anyways, I fixed the DT warning myself and applied patches 1-2. Thanks, -- Sebastian
On 03/02/2023 13:16, Sebastian Reichel wrote: > Hi, > > On Sun, Jan 22, 2023 at 12:27:44PM +0100, Pali Rohár wrote: >> On Monday 26 December 2022 12:45:11 Pali Rohár wrote: >>> This new optional priority property allows to specify custom priority level >>> of reset device. Prior this change priority level was hardcoded to 192 and >>> not possible to specify or change. Specifying other value is needed for >>> some boards. Default level when not specified stays at 192 as before. >>> >>> Signed-off-by: Pali Rohár <pali@kernel.org> >> >> Reminder: Any plan how to handle these patches? > > Please don't top-post :) Sorry, I'm a bit slow with processing > patches this cycle. Technically this was also throwing a DT > warning reported by the bot, so I expected a new version. Anyways, > I fixed the DT warning myself and applied patches 1-2. Everyone was expecting new version, so that checks pass. We should not take known-broken code, because then the duty to check for other errors is on you Sebastian. :) Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml index da2509724812..f721bdf63a98 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml @@ -19,6 +19,9 @@ description: |+ sub-node of a "syscon", "simple-mfd" node. Though the regmap property pointing to the system controller node is also supported. +allOf: + - $ref: restart-handler.yaml# + properties: compatible: const: syscon-reboot @@ -42,6 +45,9 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: The reset value written to the reboot register (32 bit access). + priority: + default: 192 + required: - compatible - offset
This new optional priority property allows to specify custom priority level of reset device. Prior this change priority level was hardcoded to 192 and not possible to specify or change. Specifying other value is needed for some boards. Default level when not specified stays at 192 as before. Signed-off-by: Pali Rohár <pali@kernel.org> --- Changes in v4: * Use restart-handler.yaml Changes in v3: * Add explanation into commit message Changes in v2: * Change sint32 to int32 * Add default --- .../devicetree/bindings/power/reset/syscon-reboot.yaml | 6 ++++++ 1 file changed, 6 insertions(+)