diff mbox series

[3/4] ARM: dts: qcom: sdx65: add specific compatible for USB HS PHY

Message ID 20221223161835.112079-3-krzysztof.kozlowski@linaro.org (mailing list archive)
State Accepted
Headers show
Series [1/4] dt-bindings: phy: qcom,usb-snps-femto-v2: use fallback compatibles | expand

Commit Message

Krzysztof Kozlowski Dec. 23, 2022, 4:18 p.m. UTC
Add SoC-specific compatible to the USB HS PHY to match other devices and
bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Konrad Dybcio Dec. 23, 2022, 4:20 p.m. UTC | #1
On 23.12.2022 17:18, Krzysztof Kozlowski wrote:
> Add SoC-specific compatible to the USB HS PHY to match other devices and
> bindings.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  arch/arm/boot/dts/qcom-sdx65.dtsi | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
> index b073e0c63df4..d3c661d7650d 100644
> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
> @@ -219,7 +219,8 @@ blsp1_uart3: serial@831000 {
>  		};
>  
>  		usb_hsphy: phy@ff4000 {
> -			compatible = "qcom,usb-snps-hs-7nm-phy";
> +			compatible = "qcom,sdx65-usb-hs-phy",
> +				     "qcom,usb-snps-hs-7nm-phy";
Not sure if the newline is necessary, but still:

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  			reg = <0xff4000 0x120>;
>  			#phy-cells = <0>;
>  			status = "disabled";
Krzysztof Kozlowski Dec. 24, 2022, 1:12 p.m. UTC | #2
On 23/12/2022 17:20, Konrad Dybcio wrote:
> 
> 
> On 23.12.2022 17:18, Krzysztof Kozlowski wrote:
>> Add SoC-specific compatible to the USB HS PHY to match other devices and
>> bindings.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  arch/arm/boot/dts/qcom-sdx65.dtsi | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
>> index b073e0c63df4..d3c661d7650d 100644
>> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
>> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
>> @@ -219,7 +219,8 @@ blsp1_uart3: serial@831000 {
>>  		};
>>  
>>  		usb_hsphy: phy@ff4000 {
>> -			compatible = "qcom,usb-snps-hs-7nm-phy";
>> +			compatible = "qcom,sdx65-usb-hs-phy",
>> +				     "qcom,usb-snps-hs-7nm-phy";
> Not sure if the newline is necessary, but still:
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

It is over 80 - up to 90 - and we still keep 80-limit in coding style.

Best regards,
Krzysztof
Konrad Dybcio Dec. 27, 2022, 11:14 a.m. UTC | #3
On 24.12.2022 14:12, Krzysztof Kozlowski wrote:
> On 23/12/2022 17:20, Konrad Dybcio wrote:
>>
>>
>> On 23.12.2022 17:18, Krzysztof Kozlowski wrote:
>>> Add SoC-specific compatible to the USB HS PHY to match other devices and
>>> bindings.
>>>
>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> ---
>>>  arch/arm/boot/dts/qcom-sdx65.dtsi | 3 ++-
>>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
>>> index b073e0c63df4..d3c661d7650d 100644
>>> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
>>> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
>>> @@ -219,7 +219,8 @@ blsp1_uart3: serial@831000 {
>>>  		};
>>>  
>>>  		usb_hsphy: phy@ff4000 {
>>> -			compatible = "qcom,usb-snps-hs-7nm-phy";
>>> +			compatible = "qcom,sdx65-usb-hs-phy",
>>> +				     "qcom,usb-snps-hs-7nm-phy";
>> Not sure if the newline is necessary, but still:
>>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> 
> It is over 80 - up to 90 - and we still keep 80-limit in coding style.
Torvalds said 100 is fine a year a go or so.

Konrad
> 
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski Dec. 27, 2022, 11:29 a.m. UTC | #4
On 27/12/2022 12:14, Konrad Dybcio wrote:
> 
> 
> On 24.12.2022 14:12, Krzysztof Kozlowski wrote:
>> On 23/12/2022 17:20, Konrad Dybcio wrote:
>>>
>>>
>>> On 23.12.2022 17:18, Krzysztof Kozlowski wrote:
>>>> Add SoC-specific compatible to the USB HS PHY to match other devices and
>>>> bindings.
>>>>
>>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>>> ---
>>>>  arch/arm/boot/dts/qcom-sdx65.dtsi | 3 ++-
>>>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
>>>> index b073e0c63df4..d3c661d7650d 100644
>>>> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
>>>> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
>>>> @@ -219,7 +219,8 @@ blsp1_uart3: serial@831000 {
>>>>  		};
>>>>  
>>>>  		usb_hsphy: phy@ff4000 {
>>>> -			compatible = "qcom,usb-snps-hs-7nm-phy";
>>>> +			compatible = "qcom,sdx65-usb-hs-phy",
>>>> +				     "qcom,usb-snps-hs-7nm-phy";
>>> Not sure if the newline is necessary, but still:
>>>
>>> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>>
>> It is over 80 - up to 90 - and we still keep 80-limit in coding style.
> Torvalds said 100 is fine a year a go or so.

Yes - when it increases the readability. When it does not, the limit by
coding style is still 80. Otherwise the coding style would be updated,
which did not happen:

https://lore.kernel.org/all/20220119160642.140e84c6@gandalf.local.home/




Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index b073e0c63df4..d3c661d7650d 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -219,7 +219,8 @@  blsp1_uart3: serial@831000 {
 		};
 
 		usb_hsphy: phy@ff4000 {
-			compatible = "qcom,usb-snps-hs-7nm-phy";
+			compatible = "qcom,sdx65-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
 			reg = <0xff4000 0x120>;
 			#phy-cells = <0>;
 			status = "disabled";