Message ID | 20221129140935.34428-1-francesco@dolcini.it (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2] arm64: dts: imx8mm-verdin: enable hpd on hdmi-connector | expand |
On Tue, Nov 29, 2022 at 03:09:35PM +0100, Francesco Dolcini wrote: > From: Stefan Eichenberger <stefan.eichenberger@toradex.com> > > Add hot plug detect gpio to the HDMI connector. > > Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Applied, thanks!
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index bcab830c6e95..8cc8a80ea255 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -56,7 +56,11 @@ key-wakeup { hdmi_connector: hdmi-connector { compatible = "hdmi-connector"; ddc-i2c-bus = <&i2c2>; + /* Verdin PWM_3_DSI (SODIMM 19) */ + hpd-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; label = "hdmi"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_3_dsi_hpd_gpio>; type = "a"; status = "disabled"; }; @@ -598,7 +602,7 @@ hwmon: hwmon@40 { hdmi_lontium_lt8912: hdmi@48 { compatible = "lontium,lt8912b"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>; + pinctrl-0 = <&pinctrl_gpio_10_dsi>; reg = <0x48>; /* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */ /* Verdin GPIO_10_DSI (SODIMM 21) */