diff mbox series

[3/8] arm64: dts: qcom: msm8916-samsung-gt58: Add Vibrator

Message ID 20230105123240.1089375-4-nikita@trvn.ru (mailing list archive)
State Superseded
Headers show
Series Add support for Samsung Galaxy tab A (2015) tablets | expand

Commit Message

Nikita Travkin Jan. 5, 2023, 12:32 p.m. UTC 
From: Siddharth Manthan <siddharth.manthan@gmail.com>

Motor is powered by VPH_PWR (aka Vbat) and controlled by GPIO.

Signed-off-by: Siddharth Manthan <siddharth.manthan@gmail.com>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
---
 .../boot/dts/qcom/msm8916-samsung-gt58.dts     | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

Comments

Krzysztof Kozlowski Jan. 6, 2023, 11:25 a.m. UTC | #1 
On 05/01/2023 13:32, Nikita Travkin wrote:
> From: Siddharth Manthan <siddharth.manthan@gmail.com>
> 
> Motor is powered by VPH_PWR (aka Vbat) and controlled by GPIO.
> 
> Signed-off-by: Siddharth Manthan <siddharth.manthan@gmail.com>
> Signed-off-by: Nikita Travkin <nikita@trvn.ru>
> ---
>  .../boot/dts/qcom/msm8916-samsung-gt58.dts     | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 

You just added this file in previous patch, so this should be squashed.
Patches should be organized logically and logical change is "new board XYZ".

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
index 688e9be590ba..37140d041a22 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
@@ -8,4 +8,22 @@  / {
 	model = "Samsung Galaxy Tab A 8.0 (2015)";
 	compatible = "samsung,gt58", "qcom,msm8916";
 	chassis-type = "tablet";
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&vibrator_en_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&msmgpio {
+	vibrator_en_default: vibrator-en-default-state {
+		pins = "gpio76";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
 };