| Message ID | 20230105134729.59542-5-m.tretter@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: imx-pxp: add support for i.MX7D | expand |
Hi Michael, Thank you for the patch. On Thu, Jan 05, 2023 at 02:47:25PM +0100, Michael Tretter wrote: > Various multiplexers in the pipeline are not used with the currently > configured data path. Disable all unused multiplexers by selecting the > "no output" (3) option. > > The datasheet doesn't explicitly require this, but the PXP has been seen > to hang after processing a few hundreds of frames otherwise. On which platform(s) have you noticed that ? > As at it, add documentation for the multiplexers that are actually > relevant for the data path. > > Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> > --- > drivers/media/platform/nxp/imx-pxp.c | 30 +++++++++++++++++----------- > 1 file changed, 18 insertions(+), 12 deletions(-) > > diff --git a/drivers/media/platform/nxp/imx-pxp.c b/drivers/media/platform/nxp/imx-pxp.c > index a957fee88829..6ffd07cda965 100644 > --- a/drivers/media/platform/nxp/imx-pxp.c > +++ b/drivers/media/platform/nxp/imx-pxp.c > @@ -731,22 +731,28 @@ static u32 pxp_data_path_ctrl0(struct pxp_ctx *ctx) > u32 ctrl0; > > ctrl0 = 0; > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(0); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(3); > + /* Bypass Dithering x3CH */ > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX14_SEL(1); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(0); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(3); > + /* Select Rotation */ > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX12_SEL(0); > + /* Select LUT */ > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX11_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(0); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(3); > + /* Select MUX8 for LUT */ > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX9_SEL(1); > + /* Select CSC 2 */ > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX8_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(0); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(3); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(3); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(3); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(3); > + /* Bypass Rotation 2 */ > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX3_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(0); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(3); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(3); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(3); The muxes being disabled look fine to me, but the values of MUX8, MUX12 and MUX14 look strange based on the i.MX7D reference manual. Maybe the register values were different in previous SoCs ? I haven't found any other relevant reference manual that document the mux values, I may have overlooked something. Anyway, this isn't an issue with this patch, so Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > return ctrl0; > } > @@ -760,8 +766,8 @@ static void pxp_set_data_path(struct pxp_ctx *ctx) > ctrl0 = pxp_data_path_ctrl0(ctx); > > ctrl1 = 0; > - ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(1); > - ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(1); > + ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(3); > + ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(3); > > writel(ctrl0, dev->mmio + HW_PXP_DATA_PATH_CTRL0); > writel(ctrl1, dev->mmio + HW_PXP_DATA_PATH_CTRL1);
On Fri, 06 Jan 2023 14:26:40 +0200, Laurent Pinchart wrote: > On Thu, Jan 05, 2023 at 02:47:25PM +0100, Michael Tretter wrote: > > Various multiplexers in the pipeline are not used with the currently > > configured data path. Disable all unused multiplexers by selecting the > > "no output" (3) option. > > > > The datasheet doesn't explicitly require this, but the PXP has been seen > > to hang after processing a few hundreds of frames otherwise. > > On which platform(s) have you noticed that ? I didn't observe this myself, but took this information from the comment in your earlier patch [0] that disables the unused multiplexers. https://lore.kernel.org/linux-media/20200510223100.11641-2-laurent.pinchart@ideasonboard.com/ > > > As at it, add documentation for the multiplexers that are actually > > relevant for the data path. > > > > Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> > > --- > > drivers/media/platform/nxp/imx-pxp.c | 30 +++++++++++++++++----------- > > 1 file changed, 18 insertions(+), 12 deletions(-) > > > > diff --git a/drivers/media/platform/nxp/imx-pxp.c b/drivers/media/platform/nxp/imx-pxp.c > > index a957fee88829..6ffd07cda965 100644 > > --- a/drivers/media/platform/nxp/imx-pxp.c > > +++ b/drivers/media/platform/nxp/imx-pxp.c > > @@ -731,22 +731,28 @@ static u32 pxp_data_path_ctrl0(struct pxp_ctx *ctx) > > u32 ctrl0; > > > > ctrl0 = 0; > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(0); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(3); > > + /* Bypass Dithering x3CH */ > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX14_SEL(1); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(0); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(3); > > + /* Select Rotation */ > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX12_SEL(0); > > + /* Select LUT */ > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX11_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(0); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(3); > > + /* Select MUX8 for LUT */ > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX9_SEL(1); > > + /* Select CSC 2 */ > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX8_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(0); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(3); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(3); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(3); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(3); > > + /* Bypass Rotation 2 */ > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX3_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(0); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(3); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(3); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(3); > > The muxes being disabled look fine to me, but the values of MUX8, MUX12 > and MUX14 look strange based on the i.MX7D reference manual. Maybe the > register values were different in previous SoCs ? I haven't found any > other relevant reference manual that document the mux values, I may have > overlooked something. The MUX8, MUX12 and MUX14 are documented in the i.MX6ULL reference manual section 41.11.51 and their location and function in the data path is shown in Figure 41-1. "PXP Architecture" on page 2490. Michael > > Anyway, this isn't an issue with this patch, so > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > return ctrl0; > > } > > @@ -760,8 +766,8 @@ static void pxp_set_data_path(struct pxp_ctx *ctx) > > ctrl0 = pxp_data_path_ctrl0(ctx); > > > > ctrl1 = 0; > > - ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(1); > > - ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(1); > > + ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(3); > > + ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(3); > > > > writel(ctrl0, dev->mmio + HW_PXP_DATA_PATH_CTRL0); > > writel(ctrl1, dev->mmio + HW_PXP_DATA_PATH_CTRL1);
Hi Michael, On Fri, Jan 06, 2023 at 03:08:55PM +0100, Michael Tretter wrote: > On Fri, 06 Jan 2023 14:26:40 +0200, Laurent Pinchart wrote: > > On Thu, Jan 05, 2023 at 02:47:25PM +0100, Michael Tretter wrote: > > > Various multiplexers in the pipeline are not used with the currently > > > configured data path. Disable all unused multiplexers by selecting the > > > "no output" (3) option. > > > > > > The datasheet doesn't explicitly require this, but the PXP has been seen > > > to hang after processing a few hundreds of frames otherwise. > > > > On which platform(s) have you noticed that ? > > I didn't observe this myself, but took this information from the comment in > your earlier patch [0] that disables the unused multiplexers. > > https://lore.kernel.org/linux-media/20200510223100.11641-2-laurent.pinchart@ideasonboard.com/ I suppose I should trust myself :-) > > > As at it, add documentation for the multiplexers that are actually > > > relevant for the data path. > > > > > > Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> > > > --- > > > drivers/media/platform/nxp/imx-pxp.c | 30 +++++++++++++++++----------- > > > 1 file changed, 18 insertions(+), 12 deletions(-) > > > > > > diff --git a/drivers/media/platform/nxp/imx-pxp.c b/drivers/media/platform/nxp/imx-pxp.c > > > index a957fee88829..6ffd07cda965 100644 > > > --- a/drivers/media/platform/nxp/imx-pxp.c > > > +++ b/drivers/media/platform/nxp/imx-pxp.c > > > @@ -731,22 +731,28 @@ static u32 pxp_data_path_ctrl0(struct pxp_ctx *ctx) > > > u32 ctrl0; > > > > > > ctrl0 = 0; > > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(0); > > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(3); > > > + /* Bypass Dithering x3CH */ > > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX14_SEL(1); > > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(0); > > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(3); > > > + /* Select Rotation */ > > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX12_SEL(0); > > > + /* Select LUT */ > > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX11_SEL(0); > > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(0); > > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(3); > > > + /* Select MUX8 for LUT */ > > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX9_SEL(1); > > > + /* Select CSC 2 */ > > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX8_SEL(0); > > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(0); > > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(0); > > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(0); > > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(0); > > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(3); > > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(3); > > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(3); > > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(3); > > > + /* Bypass Rotation 2 */ > > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX3_SEL(0); > > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(0); > > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(0); > > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(0); > > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(3); > > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(3); > > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(3); > > > > The muxes being disabled look fine to me, but the values of MUX8, MUX12 > > and MUX14 look strange based on the i.MX7D reference manual. Maybe the > > register values were different in previous SoCs ? I haven't found any > > other relevant reference manual that document the mux values, I may have > > overlooked something. > > The MUX8, MUX12 and MUX14 are documented in the i.MX6ULL reference manual > section 41.11.51 and their location and function in the data path is shown in > Figure 41-1. "PXP Architecture" on page 2490. I've seen that, but as far as I can tell, the description of the register in section 41.11.51 doesn't tell what the different MUX* field value map to. Figure 41-1 shows that, for instance, MUX8 handles CSC2 bypass, but it doesn't tell what value corresponds to what path. > > Anyway, this isn't an issue with this patch, so > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > > > > return ctrl0; > > > } > > > @@ -760,8 +766,8 @@ static void pxp_set_data_path(struct pxp_ctx *ctx) > > > ctrl0 = pxp_data_path_ctrl0(ctx); > > > > > > ctrl1 = 0; > > > - ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(1); > > > - ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(1); > > > + ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(3); > > > + ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(3); > > > > > > writel(ctrl0, dev->mmio + HW_PXP_DATA_PATH_CTRL0); > > > writel(ctrl1, dev->mmio + HW_PXP_DATA_PATH_CTRL1);
diff --git a/drivers/media/platform/nxp/imx-pxp.c b/drivers/media/platform/nxp/imx-pxp.c index a957fee88829..6ffd07cda965 100644 --- a/drivers/media/platform/nxp/imx-pxp.c +++ b/drivers/media/platform/nxp/imx-pxp.c @@ -731,22 +731,28 @@ static u32 pxp_data_path_ctrl0(struct pxp_ctx *ctx) u32 ctrl0; ctrl0 = 0; - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(0); + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(3); + /* Bypass Dithering x3CH */ ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX14_SEL(1); - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(0); + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(3); + /* Select Rotation */ ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX12_SEL(0); + /* Select LUT */ ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX11_SEL(0); - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(0); + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(3); + /* Select MUX8 for LUT */ ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX9_SEL(1); + /* Select CSC 2 */ ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX8_SEL(0); - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(0); - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(0); - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(0); - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(0); + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(3); + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(3); + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(3); + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(3); + /* Bypass Rotation 2 */ ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX3_SEL(0); - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(0); - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(0); - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(0); + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(3); + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(3); + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(3); return ctrl0; } @@ -760,8 +766,8 @@ static void pxp_set_data_path(struct pxp_ctx *ctx) ctrl0 = pxp_data_path_ctrl0(ctx); ctrl1 = 0; - ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(1); - ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(1); + ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(3); + ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(3); writel(ctrl0, dev->mmio + HW_PXP_DATA_PATH_CTRL0); writel(ctrl1, dev->mmio + HW_PXP_DATA_PATH_CTRL1);
Various multiplexers in the pipeline are not used with the currently configured data path. Disable all unused multiplexers by selecting the "no output" (3) option. The datasheet doesn't explicitly require this, but the PXP has been seen to hang after processing a few hundreds of frames otherwise. As at it, add documentation for the multiplexers that are actually relevant for the data path. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> --- drivers/media/platform/nxp/imx-pxp.c | 30 +++++++++++++++++----------- 1 file changed, 18 insertions(+), 12 deletions(-)