| Message ID | 20230107102231.23682-8-treapking@chromium.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Register Type-C mode-switch in DP bridge endpoints | expand |
On 07/01/2023 11:22, Pin-yen Lin wrote: > ITE IT6505 can be used in systems to switch the DP traffic between > two downstreams, which can be USB Type-C DisplayPort alternate mode > lane or regular DisplayPort output ports. > > Update the binding to accommodate this usage by introducing a > data-lanes and a mode-switch property on endpoints. > > Signed-off-by: Pin-yen Lin <treapking@chromium.org> > > --- > > Changes in v8: > - Updated bindings for data-lanes property > - Fixed subject prefix How? It is still wrong. You have slash there. > (...) > port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > reg = <1>; > - it6505_out: endpoint { > + it6505_out: endpoint@0 { > + reg = <0>; > remote-endpoint = <&dp_in>; > data-lanes = <0 1>; > }; > @@ -148,3 +173,49 @@ examples: > }; > }; > }; > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c3 { Just i2c Best regards, Krzysztof
Hi Krzysztof, Thanks for your review. On Sun, Jan 8, 2023 at 10:59 PM Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > On 07/01/2023 11:22, Pin-yen Lin wrote: > > ITE IT6505 can be used in systems to switch the DP traffic between > > two downstreams, which can be USB Type-C DisplayPort alternate mode > > lane or regular DisplayPort output ports. > > > > Update the binding to accommodate this usage by introducing a > > data-lanes and a mode-switch property on endpoints. > > > > Signed-off-by: Pin-yen Lin <treapking@chromium.org> > > > > --- > > > > Changes in v8: > > - Updated bindings for data-lanes property > > - Fixed subject prefix > > How? It is still wrong. You have slash there. Sorry, I didn't even notice that. I'll fix this in v9. > > > > > (...) > > > port@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > reg = <1>; > > - it6505_out: endpoint { > > + it6505_out: endpoint@0 { > > + reg = <0>; > > remote-endpoint = <&dp_in>; > > data-lanes = <0 1>; > > }; > > @@ -148,3 +173,49 @@ examples: > > }; > > }; > > }; > > + - | > > + #include <dt-bindings/interrupt-controller/irq.h> > > + > > + i2c3 { > > Just i2c I missed this when preparing v8. I'll fix this in v9. > > > Best regards, > Krzysztof > Best regards, Pin-yen
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml index b16a9d9127dd..8d56654634a8 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -77,20 +77,43 @@ properties: unevaluatedProperties: false description: Video port for DP output - properties: - endpoint: + patternProperties: + "^endpoint@[01]$": $ref: /schemas/graph.yaml#/$defs/endpoint-base unevaluatedProperties: false properties: + reg: + maxItems: 1 + + remote-endpoint: true + data-lanes: - minItems: 1 - uniqueItems: true - items: - - enum: [ 0, 1 ] - - const: 1 - - const: 2 - - const: 3 + oneOf: + - items: + - enum: [0, 1, 2, 3] + + - items: + - const: 0 + - const: 1 + + - items: + - const: 2 + - const: 3 + + - items: + - const: 0 + - const: 1 + - const: 2 + - const: 3 + + mode-switch: + type: boolean + description: Register this node as a Type-C mode switch or not. + + required: + - reg + - remote-endpoint required: - port@0 @@ -102,7 +125,6 @@ required: - pwr18-supply - interrupts - reset-gpios - - extcon - ports additionalProperties: false @@ -139,8 +161,11 @@ examples: }; port@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; - it6505_out: endpoint { + it6505_out: endpoint@0 { + reg = <0>; remote-endpoint = <&dp_in>; data-lanes = <0 1>; }; @@ -148,3 +173,49 @@ examples: }; }; }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c3 { + #address-cells = <1>; + #size-cells = <0>; + + dp-bridge@5c { + compatible = "ite,it6505"; + interrupts = <8 IRQ_TYPE_LEVEL_LOW 8 0>; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&it6505_pins>; + ovdd-supply = <&mt6366_vsim2_reg>; + pwr18-supply = <&pp1800_dpbrdg_dx>; + reset-gpios = <&pio 177 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + it6505_dpi_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + ite_typec0: endpoint@0 { + reg = <0>; + mode-switch; + data-lanes = <0 1>; + remote-endpoint = <&typec_port0>; + }; + ite_typec1: endpoint@1 { + reg = <1>; + mode-switch; + data-lanes = <2 3>; + remote-endpoint = <&typec_port1>; + }; + }; + }; + }; + };
ITE IT6505 can be used in systems to switch the DP traffic between two downstreams, which can be USB Type-C DisplayPort alternate mode lane or regular DisplayPort output ports. Update the binding to accommodate this usage by introducing a data-lanes and a mode-switch property on endpoints. Signed-off-by: Pin-yen Lin <treapking@chromium.org> --- Changes in v8: - Updated bindings for data-lanes property - Fixed subject prefix Changes in v7: - Fixed issues reported by dt_binding_check. - Updated the schema and the example dts for data-lanes. - Changed to generic naming for the example dts node. Changes in v6: - Remove switches node and use endpoints and data-lanes property to describe the connections. .../bindings/display/bridge/ite,it6505.yaml | 93 ++++++++++++++++--- 1 file changed, 82 insertions(+), 11 deletions(-)