| Message ID | 20230108130440.670181-2-robimarko@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | [1/2] clk: qcom: ipq8074: populate fw_name for usb3phy-s | expand |
On Sun, 8 Jan 2023 at 15:04, Robert Marko <robimarko@gmail.com> wrote: > > It seems that clock-output-names for the USB3 QMP PHY-s where set without > actually checking what is the GCC clock driver expecting, so clock core > could never actually find the parents for usb0_pipe_clk_src and > usb1_pipe_clk_src clocks in the GCC driver. > > So, correct the names to be what the driver expects so that parenting > works. > > Before: > gcc_usb0_pipe_clk_src 0 0 0 125000000 0 0 50000 Y > gcc_usb1_pipe_clk_src 0 0 0 125000000 0 0 50000 Y > > After: > usb3phy_0_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y > usb0_pipe_clk_src 1 1 0 125000000 0 0 50000 Y > gcc_usb0_pipe_clk 1 1 0 125000000 0 0 50000 Y > usb3phy_1_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y > usb1_pipe_clk_src 1 1 0 125000000 0 0 50000 Y > gcc_usb1_pipe_clk 1 1 0 125000000 0 0 50000 Y > > Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support") > Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Nevertheless, could you please add .fw_name to these entries in gcc driver (as you did for other clocks in 35dc8e101a8e ("clk: qcom: ipq8074: populate fw_name for all parents")) and add all pipe clocks to the gcc node? This way you can drop clock-output-names from the PHY nodes. > --- > arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) [skipped]
On Sun, 8 Jan 2023 at 18:32, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > On Sun, 8 Jan 2023 at 15:04, Robert Marko <robimarko@gmail.com> wrote: > > > > It seems that clock-output-names for the USB3 QMP PHY-s where set without > > actually checking what is the GCC clock driver expecting, so clock core > > could never actually find the parents for usb0_pipe_clk_src and > > usb1_pipe_clk_src clocks in the GCC driver. > > > > So, correct the names to be what the driver expects so that parenting > > works. > > > > Before: > > gcc_usb0_pipe_clk_src 0 0 0 125000000 0 0 50000 Y > > gcc_usb1_pipe_clk_src 0 0 0 125000000 0 0 50000 Y > > > > After: > > usb3phy_0_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y > > usb0_pipe_clk_src 1 1 0 125000000 0 0 50000 Y > > gcc_usb0_pipe_clk 1 1 0 125000000 0 0 50000 Y > > usb3phy_1_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y > > usb1_pipe_clk_src 1 1 0 125000000 0 0 50000 Y > > gcc_usb1_pipe_clk 1 1 0 125000000 0 0 50000 Y > > > > Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support") > > Signed-off-by: Robert Marko <robimarko@gmail.com> > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > Nevertheless, could you please add .fw_name to these entries in gcc > driver (as you did for other clocks in 35dc8e101a8e ("clk: qcom: > ipq8074: populate fw_name for all parents")) and add all pipe clocks > to the gcc node? This way you can drop clock-output-names from the PHY > nodes. As you noticed they are in the GCC patch already, after the PCI PIPE parenting fixes are merged I plan to add them to the GCC node to avoid global lookup. Regards, Robert > > > --- > > arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > [skipped] > > -- > With best wishes > Dmitry
On Sun, 8 Jan 2023 at 20:04, Robert Marko <robimarko@gmail.com> wrote: > > On Sun, 8 Jan 2023 at 18:32, Dmitry Baryshkov > <dmitry.baryshkov@linaro.org> wrote: > > > > On Sun, 8 Jan 2023 at 15:04, Robert Marko <robimarko@gmail.com> wrote: > > > > > > It seems that clock-output-names for the USB3 QMP PHY-s where set without > > > actually checking what is the GCC clock driver expecting, so clock core > > > could never actually find the parents for usb0_pipe_clk_src and > > > usb1_pipe_clk_src clocks in the GCC driver. > > > > > > So, correct the names to be what the driver expects so that parenting > > > works. > > > > > > Before: > > > gcc_usb0_pipe_clk_src 0 0 0 125000000 0 0 50000 Y > > > gcc_usb1_pipe_clk_src 0 0 0 125000000 0 0 50000 Y > > > > > > After: > > > usb3phy_0_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y > > > usb0_pipe_clk_src 1 1 0 125000000 0 0 50000 Y > > > gcc_usb0_pipe_clk 1 1 0 125000000 0 0 50000 Y > > > usb3phy_1_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y > > > usb1_pipe_clk_src 1 1 0 125000000 0 0 50000 Y > > > gcc_usb1_pipe_clk 1 1 0 125000000 0 0 50000 Y > > > > > > Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support") > > > Signed-off-by: Robert Marko <robimarko@gmail.com> > > > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > > > Nevertheless, could you please add .fw_name to these entries in gcc > > driver (as you did for other clocks in 35dc8e101a8e ("clk: qcom: > > ipq8074: populate fw_name for all parents")) and add all pipe clocks > > to the gcc node? This way you can drop clock-output-names from the PHY > > nodes. > > As you noticed they are in the GCC patch already, after the PCI PIPE > parenting fixes > are merged I plan to add them to the GCC node to avoid global lookup. Good! I think the pcie fixes are already in Bjorn's tree. And you might send the dts fix anyway, in the worst case the driver will just ignore the DT clocks.
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index a0f7460020c2..3d1fccdf37c7 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -263,7 +263,7 @@ usb1_ssphy: phy@58200 { #clock-cells = <0>; clocks = <&gcc GCC_USB1_PIPE_CLK>; clock-names = "pipe0"; - clock-output-names = "gcc_usb1_pipe_clk_src"; + clock-output-names = "usb3phy_1_cc_pipe_clk"; }; }; @@ -306,7 +306,7 @@ usb0_ssphy: phy@78200 { #clock-cells = <0>; clocks = <&gcc GCC_USB0_PIPE_CLK>; clock-names = "pipe0"; - clock-output-names = "gcc_usb0_pipe_clk_src"; + clock-output-names = "usb3phy_0_cc_pipe_clk"; }; };
It seems that clock-output-names for the USB3 QMP PHY-s where set without actually checking what is the GCC clock driver expecting, so clock core could never actually find the parents for usb0_pipe_clk_src and usb1_pipe_clk_src clocks in the GCC driver. So, correct the names to be what the driver expects so that parenting works. Before: gcc_usb0_pipe_clk_src 0 0 0 125000000 0 0 50000 Y gcc_usb1_pipe_clk_src 0 0 0 125000000 0 0 50000 Y After: usb3phy_0_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y usb0_pipe_clk_src 1 1 0 125000000 0 0 50000 Y gcc_usb0_pipe_clk 1 1 0 125000000 0 0 50000 Y usb3phy_1_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y usb1_pipe_clk_src 1 1 0 125000000 0 0 50000 Y gcc_usb1_pipe_clk 1 1 0 125000000 0 0 50000 Y Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support") Signed-off-by: Robert Marko <robimarko@gmail.com> --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)