| Message ID | 20221221231943.1961117-2-marijn.suijten@somainline.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | drm/msm: DSC Electric Boogaloo for sm8[12]50 | expand |
On 22/12/2022 01:19, Marijn Suijten wrote: > Active CTLs have to configure what DSC block(s) have to be enabled, and > what DSC block(s) have to be flushed; this value was initialized to zero > resulting in the necessary register writes to never happen (or would > write zero otherwise). This seems to have gotten lost in the DSC v4->v5 > series while refactoring how the combination with merge_3d was handled. > > Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder") > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 1 + > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 1 + > 2 files changed, 2 insertions(+) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c index ae28b2b93e69..35791f93c33d 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c @@ -61,6 +61,7 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg( intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD; intf_cfg.stream_sel = cmd_enc->stream_sel; intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc); + intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc); ctl->ops.setup_intf_cfg(ctl, &intf_cfg); /* setup which pp blk will connect to this intf */ diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c index 0f71e8fe7be7..9ee3a7306a5f 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c @@ -274,6 +274,7 @@ static void dpu_encoder_phys_vid_setup_timing_engine( intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_VID; intf_cfg.stream_sel = 0; /* Don't care value for video mode */ intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc); + intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc); if (phys_enc->hw_pp->merge_3d) intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx;
Active CTLs have to configure what DSC block(s) have to be enabled, and what DSC block(s) have to be flushed; this value was initialized to zero resulting in the necessary register writes to never happen (or would write zero otherwise). This seems to have gotten lost in the DSC v4->v5 series while refactoring how the combination with merge_3d was handled. Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 1 + drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 1 + 2 files changed, 2 insertions(+)