diff mbox series

[v9,1/4] Documentation: fpga: dfl: Add documentation for DFHv1

Message ID 20230104232253.24743-2-matthew.gerlach@linux.intel.com (mailing list archive)
State New
Headers show
Series Enhance definition of DFH and use enhancements for UART driver | expand

Commit Message

Matthew Gerlach Jan. 4, 2023, 11:22 p.m. UTC 
From: Matthew Gerlach <matthew.gerlach@linux.intel.com>

Add documentation describing the extensions provided by Version
1 of the Device Feature Header (DFHv1).

Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
v9: move DFH definitions to after the Overview
    fix name of feature revision field
    clarify next field in DFH

v8: fix section titles

v7: shorten long lines and wording suggestions by bagasdotme@gmail.com

v6: no change

v5: use nested list for field descriptions
    clean up prose
    add reviewed-by and comments from Ilpo Järvinen

v4: Remove marketing speak and separate v0 and v1 descriptions.
    Fix errors reported by "make htmldocs".

v3: no change

v2: s/GUILD/GUID/
    add picture
---
 Documentation/fpga/dfl.rst | 117 +++++++++++++++++++++++++++++++++++++
 1 file changed, 117 insertions(+)

Comments

Tom Rix Jan. 9, 2023, 1:48 p.m. UTC | #1 
On 1/4/23 3:22 PM, matthew.gerlach@linux.intel.com wrote:
> From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>
> Add documentation describing the extensions provided by Version
> 1 of the Device Feature Header (DFHv1).
>
> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Thanks for the changes.

Reviewed-by: Tom Rix <trix@redhat.com>

> ---
> v9: move DFH definitions to after the Overview
>      fix name of feature revision field
>      clarify next field in DFH
>
> v8: fix section titles
>
> v7: shorten long lines and wording suggestions by bagasdotme@gmail.com
>
> v6: no change
>
> v5: use nested list for field descriptions
>      clean up prose
>      add reviewed-by and comments from Ilpo Järvinen
>
> v4: Remove marketing speak and separate v0 and v1 descriptions.
>      Fix errors reported by "make htmldocs".
>
> v3: no change
>
> v2: s/GUILD/GUID/
>      add picture
> ---
>   Documentation/fpga/dfl.rst | 117 +++++++++++++++++++++++++++++++++++++
>   1 file changed, 117 insertions(+)
>
> diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
> index 15b670926084..7e015249785b 100644
> --- a/Documentation/fpga/dfl.rst
> +++ b/Documentation/fpga/dfl.rst
> @@ -75,6 +75,123 @@ convenient for software to locate each feature by walking through this list,
>   and can be implemented in register regions of any FPGA device.
>   
>   
> +Device Feature Header - Version 0
> +=================================
> +Version 0 (DFHv0) is the original version of the Device Feature Header.
> +The format of DFHv0 is shown below::
> +
> +    +-----------------------------------------------------------------------+
> +    |63 Type 60|59 DFH VER 52|51 Rsvd 41|40 EOL|39 Next 16|15 REV 12|11 ID 0| 0x00
> +    +-----------------------------------------------------------------------+
> +    |63                                 GUID_L                             0| 0x08
> +    +-----------------------------------------------------------------------+
> +    |63                                 GUID_H                             0| 0x10
> +    +-----------------------------------------------------------------------+
> +
> +- Offset 0x00
> +
> +  * Type - The type of DFH (e.g. FME, AFU, or private feature).
> +  * DFH VER - The version of the DFH.
> +  * Rsvd - Currently unused.
> +  * EOL - Set if the DFH is the end of the Device Feature List (DFL).
> +  * Next - The offset in bytes of the next DFH in the DFL from the DFH start,
> +    and the start of a DFH must be aligned to an 8 byte boundary.
> +    If EOL is set, Next is the size of MMIO of the last feature in the list.
> +  * REV - The revision of the feature associated with this header.
> +  * ID - The feature ID if Type is private feature.
> +
> +- Offset 0x08
> +
> +  * GUID_L - Least significant 64 bits of a 128-bit Globally Unique Identifier
> +    (present only if Type is FME or AFU).
> +
> +- Offset 0x10
> +
> +  * GUID_H - Most significant 64 bits of a 128-bit Globally Unique Identifier
> +    (present only if Type is FME or AFU).
> +
> +
> +Device Feature Header - Version 1
> +=================================
> +Version 1 (DFHv1) of the Device Feature Header adds the following functionality:
> +
> +* Provides a standardized mechanism for features to describe
> +  parameters/capabilities to software.
> +* Standardize the use of a GUID for all DFHv1 types.
> +* Decouples the DFH location from the register space of the feature itself.
> +
> +The format of Version 1 of the Device Feature Header (DFH) is shown below::
> +
> +    +-----------------------------------------------------------------------+
> +    |63 Type 60|59 DFH VER 52|51 Rsvd 41|40 EOL|39 Next 16|15 REV 12|11 ID 0| 0x00
> +    +-----------------------------------------------------------------------+
> +    |63                                 GUID_L                             0| 0x08
> +    +-----------------------------------------------------------------------+
> +    |63                                 GUID_H                             0| 0x10
> +    +-----------------------------------------------------------------------+
> +    |63                   Reg Address/Offset                      1|  Rel  0| 0x18
> +    +-----------------------------------------------------------------------+
> +    |63        Reg Size       32|Params 31|30 Group    16|15 Instance      0| 0x20
> +    +-----------------------------------------------------------------------+
> +    |63 Next    35|34RSV33|EOP32|31 Param Version 16|15 Param ID           0| 0x28
> +    +-----------------------------------------------------------------------+
> +    |63                 Parameter Data                                     0| 0x30
> +    +-----------------------------------------------------------------------+
> +
> +                                  ...
> +
> +    +-----------------------------------------------------------------------+
> +    |63 Next    35|34RSV33|EOP32|31 Param Version 16|15 Param ID           0|
> +    +-----------------------------------------------------------------------+
> +    |63                 Parameter Data                                     0|
> +    +-----------------------------------------------------------------------+
> +
> +- Offset 0x00
> +
> +  * Type - The type of DFH (e.g. FME, AFU, or private feature).
> +  * DFH VER - The version of the DFH.
> +  * Rsvd - Currently unused.
> +  * EOL - Set if the DFH is the end of the Device Feature List (DFL).
> +  * Next - The offset in bytes of the next DFH in the DFL from the DFH start,
> +    and the start of a DFH must be aligned to an 8 byte boundary.
> +    If EOL is set, Next is the size of MMIO of the last feature in the list.
> +  * REV - The revision of the feature associated with this header.
> +  * ID - The feature ID if Type is private feature.
> +
> +- Offset 0x08
> +
> +  * GUID_L - Least significant 64 bits of a 128-bit Globally Unique Identifier.
> +
> +- Offset 0x10
> +
> +  * GUID_H - Most significant 64 bits of a 128-bit Globally Unique Identifier.
> +
> +- Offset 0x18
> +
> +  * Reg Address/Offset - If Rel bit is set, then the value is the high 63 bits
> +    of a 16-bit aligned absolute address of the feature's registers. Otherwise
> +    the value is the offset from the start of the DFH of the feature's registers.
> +
> +- Offset 0x20
> +
> +  * Reg Size - Size of feature's register set in bytes.
> +  * Params - Set if DFH has a list of parameter blocks.
> +  * Group - Id of group if feature is part of a group.
> +  * Instance - Id of feature instance within a group.
> +
> +- Offset 0x28 if feature has parameters
> +
> +  * Next - Offset to the next parameter block in 8 byte words. If EOP set,
> +    size in 8 byte words of last parameter.
> +  * Param Version - Version of Param ID.
> +  * Param ID - ID of parameter.
> +
> +- Offset 0x30
> +
> +  * Parameter Data - Parameter data whose size and format is defined by
> +    version and ID of the parameter.
> +
> +
>   FIU - FME (FPGA Management Engine)
>   ==================================
>   The FPGA Management Engine performs reconfiguration and other infrastructure
Matthew Gerlach Jan. 9, 2023, 4:40 p.m. UTC | #2 
On Mon, 9 Jan 2023, Tom Rix wrote:

>
> On 1/4/23 3:22 PM, matthew.gerlach@linux.intel.com wrote:
>> From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>> 
>> Add documentation describing the extensions provided by Version
>> 1 of the Device Feature Header (DFHv1).
>> 
>> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
>
> Thanks for the changes.
>
> Reviewed-by: Tom Rix <trix@redhat.com>

Thanks for the review,
Matthew Gerlach


>
>> ---
>> v9: move DFH definitions to after the Overview
>>      fix name of feature revision field
>>      clarify next field in DFH
>> 
>> v8: fix section titles
>> 
>> v7: shorten long lines and wording suggestions by bagasdotme@gmail.com
>> 
>> v6: no change
>> 
>> v5: use nested list for field descriptions
>>      clean up prose
>>      add reviewed-by and comments from Ilpo Järvinen
>> 
>> v4: Remove marketing speak and separate v0 and v1 descriptions.
>>      Fix errors reported by "make htmldocs".
>> 
>> v3: no change
>> 
>> v2: s/GUILD/GUID/
>>      add picture
>> ---
>>   Documentation/fpga/dfl.rst | 117 +++++++++++++++++++++++++++++++++++++
>>   1 file changed, 117 insertions(+)
>> 
>> diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
>> index 15b670926084..7e015249785b 100644
>> --- a/Documentation/fpga/dfl.rst
>> +++ b/Documentation/fpga/dfl.rst
>> @@ -75,6 +75,123 @@ convenient for software to locate each feature by 
>> walking through this list,
>>   and can be implemented in register regions of any FPGA device.
>>     +Device Feature Header - Version 0
>> +=================================
>> +Version 0 (DFHv0) is the original version of the Device Feature Header.
>> +The format of DFHv0 is shown below::
>> +
>> + 
>> +-----------------------------------------------------------------------+
>> +    |63 Type 60|59 DFH VER 52|51 Rsvd 41|40 EOL|39 Next 16|15 REV 12|11 ID 
>> 0| 0x00
>> + 
>> +-----------------------------------------------------------------------+
>> +    |63                                 GUID_L 
>> 0| 0x08
>> + 
>> +-----------------------------------------------------------------------+
>> +    |63                                 GUID_H 
>> 0| 0x10
>> + 
>> +-----------------------------------------------------------------------+
>> +
>> +- Offset 0x00
>> +
>> +  * Type - The type of DFH (e.g. FME, AFU, or private feature).
>> +  * DFH VER - The version of the DFH.
>> +  * Rsvd - Currently unused.
>> +  * EOL - Set if the DFH is the end of the Device Feature List (DFL).
>> +  * Next - The offset in bytes of the next DFH in the DFL from the DFH 
>> start,
>> +    and the start of a DFH must be aligned to an 8 byte boundary.
>> +    If EOL is set, Next is the size of MMIO of the last feature in the 
>> list.
>> +  * REV - The revision of the feature associated with this header.
>> +  * ID - The feature ID if Type is private feature.
>> +
>> +- Offset 0x08
>> +
>> +  * GUID_L - Least significant 64 bits of a 128-bit Globally Unique 
>> Identifier
>> +    (present only if Type is FME or AFU).
>> +
>> +- Offset 0x10
>> +
>> +  * GUID_H - Most significant 64 bits of a 128-bit Globally Unique 
>> Identifier
>> +    (present only if Type is FME or AFU).
>> +
>> +
>> +Device Feature Header - Version 1
>> +=================================
>> +Version 1 (DFHv1) of the Device Feature Header adds the following 
>> functionality:
>> +
>> +* Provides a standardized mechanism for features to describe
>> +  parameters/capabilities to software.
>> +* Standardize the use of a GUID for all DFHv1 types.
>> +* Decouples the DFH location from the register space of the feature 
>> itself.
>> +
>> +The format of Version 1 of the Device Feature Header (DFH) is shown 
>> below::
>> +
>> + 
>> +-----------------------------------------------------------------------+
>> +    |63 Type 60|59 DFH VER 52|51 Rsvd 41|40 EOL|39 Next 16|15 REV 12|11 ID 
>> 0| 0x00
>> + 
>> +-----------------------------------------------------------------------+
>> +    |63                                 GUID_L 
>> 0| 0x08
>> + 
>> +-----------------------------------------------------------------------+
>> +    |63                                 GUID_H 
>> 0| 0x10
>> + 
>> +-----------------------------------------------------------------------+
>> +    |63                   Reg Address/Offset                      1|  Rel 
>> 0| 0x18
>> + 
>> +-----------------------------------------------------------------------+
>> +    |63        Reg Size       32|Params 31|30 Group    16|15 Instance 
>> 0| 0x20
>> + 
>> +-----------------------------------------------------------------------+
>> +    |63 Next    35|34RSV33|EOP32|31 Param Version 16|15 Param ID 
>> 0| 0x28
>> + 
>> +-----------------------------------------------------------------------+
>> +    |63                 Parameter Data 
>> 0| 0x30
>> + 
>> +-----------------------------------------------------------------------+
>> +
>> +                                  ...
>> +
>> + 
>> +-----------------------------------------------------------------------+
>> +    |63 Next    35|34RSV33|EOP32|31 Param Version 16|15 Param ID 
>> 0|
>> + 
>> +-----------------------------------------------------------------------+
>> +    |63                 Parameter Data 
>> 0|
>> + 
>> +-----------------------------------------------------------------------+
>> +
>> +- Offset 0x00
>> +
>> +  * Type - The type of DFH (e.g. FME, AFU, or private feature).
>> +  * DFH VER - The version of the DFH.
>> +  * Rsvd - Currently unused.
>> +  * EOL - Set if the DFH is the end of the Device Feature List (DFL).
>> +  * Next - The offset in bytes of the next DFH in the DFL from the DFH 
>> start,
>> +    and the start of a DFH must be aligned to an 8 byte boundary.
>> +    If EOL is set, Next is the size of MMIO of the last feature in the 
>> list.
>> +  * REV - The revision of the feature associated with this header.
>> +  * ID - The feature ID if Type is private feature.
>> +
>> +- Offset 0x08
>> +
>> +  * GUID_L - Least significant 64 bits of a 128-bit Globally Unique 
>> Identifier.
>> +
>> +- Offset 0x10
>> +
>> +  * GUID_H - Most significant 64 bits of a 128-bit Globally Unique 
>> Identifier.
>> +
>> +- Offset 0x18
>> +
>> +  * Reg Address/Offset - If Rel bit is set, then the value is the high 63 
>> bits
>> +    of a 16-bit aligned absolute address of the feature's registers. 
>> Otherwise
>> +    the value is the offset from the start of the DFH of the feature's 
>> registers.
>> +
>> +- Offset 0x20
>> +
>> +  * Reg Size - Size of feature's register set in bytes.
>> +  * Params - Set if DFH has a list of parameter blocks.
>> +  * Group - Id of group if feature is part of a group.
>> +  * Instance - Id of feature instance within a group.
>> +
>> +- Offset 0x28 if feature has parameters
>> +
>> +  * Next - Offset to the next parameter block in 8 byte words. If EOP set,
>> +    size in 8 byte words of last parameter.
>> +  * Param Version - Version of Param ID.
>> +  * Param ID - ID of parameter.
>> +
>> +- Offset 0x30
>> +
>> +  * Parameter Data - Parameter data whose size and format is defined by
>> +    version and ID of the parameter.
>> +
>> +
>>   FIU - FME (FPGA Management Engine)
>>   ==================================
>>   The FPGA Management Engine performs reconfiguration and other 
>> infrastructure
>
>
diff mbox series

Patch

diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
index 15b670926084..7e015249785b 100644
--- a/Documentation/fpga/dfl.rst
+++ b/Documentation/fpga/dfl.rst
@@ -75,6 +75,123 @@  convenient for software to locate each feature by walking through this list,
 and can be implemented in register regions of any FPGA device.
 
 
+Device Feature Header - Version 0
+=================================
+Version 0 (DFHv0) is the original version of the Device Feature Header.
+The format of DFHv0 is shown below::
+
+    +-----------------------------------------------------------------------+
+    |63 Type 60|59 DFH VER 52|51 Rsvd 41|40 EOL|39 Next 16|15 REV 12|11 ID 0| 0x00
+    +-----------------------------------------------------------------------+
+    |63                                 GUID_L                             0| 0x08
+    +-----------------------------------------------------------------------+
+    |63                                 GUID_H                             0| 0x10
+    +-----------------------------------------------------------------------+
+
+- Offset 0x00
+
+  * Type - The type of DFH (e.g. FME, AFU, or private feature).
+  * DFH VER - The version of the DFH.
+  * Rsvd - Currently unused.
+  * EOL - Set if the DFH is the end of the Device Feature List (DFL).
+  * Next - The offset in bytes of the next DFH in the DFL from the DFH start,
+    and the start of a DFH must be aligned to an 8 byte boundary.
+    If EOL is set, Next is the size of MMIO of the last feature in the list.
+  * REV - The revision of the feature associated with this header.
+  * ID - The feature ID if Type is private feature.
+
+- Offset 0x08
+
+  * GUID_L - Least significant 64 bits of a 128-bit Globally Unique Identifier
+    (present only if Type is FME or AFU).
+
+- Offset 0x10
+
+  * GUID_H - Most significant 64 bits of a 128-bit Globally Unique Identifier
+    (present only if Type is FME or AFU).
+
+
+Device Feature Header - Version 1
+=================================
+Version 1 (DFHv1) of the Device Feature Header adds the following functionality:
+
+* Provides a standardized mechanism for features to describe
+  parameters/capabilities to software.
+* Standardize the use of a GUID for all DFHv1 types.
+* Decouples the DFH location from the register space of the feature itself.
+
+The format of Version 1 of the Device Feature Header (DFH) is shown below::
+
+    +-----------------------------------------------------------------------+
+    |63 Type 60|59 DFH VER 52|51 Rsvd 41|40 EOL|39 Next 16|15 REV 12|11 ID 0| 0x00
+    +-----------------------------------------------------------------------+
+    |63                                 GUID_L                             0| 0x08
+    +-----------------------------------------------------------------------+
+    |63                                 GUID_H                             0| 0x10
+    +-----------------------------------------------------------------------+
+    |63                   Reg Address/Offset                      1|  Rel  0| 0x18
+    +-----------------------------------------------------------------------+
+    |63        Reg Size       32|Params 31|30 Group    16|15 Instance      0| 0x20
+    +-----------------------------------------------------------------------+
+    |63 Next    35|34RSV33|EOP32|31 Param Version 16|15 Param ID           0| 0x28
+    +-----------------------------------------------------------------------+
+    |63                 Parameter Data                                     0| 0x30
+    +-----------------------------------------------------------------------+
+
+                                  ...
+
+    +-----------------------------------------------------------------------+
+    |63 Next    35|34RSV33|EOP32|31 Param Version 16|15 Param ID           0|
+    +-----------------------------------------------------------------------+
+    |63                 Parameter Data                                     0|
+    +-----------------------------------------------------------------------+
+
+- Offset 0x00
+
+  * Type - The type of DFH (e.g. FME, AFU, or private feature).
+  * DFH VER - The version of the DFH.
+  * Rsvd - Currently unused.
+  * EOL - Set if the DFH is the end of the Device Feature List (DFL).
+  * Next - The offset in bytes of the next DFH in the DFL from the DFH start,
+    and the start of a DFH must be aligned to an 8 byte boundary.
+    If EOL is set, Next is the size of MMIO of the last feature in the list.
+  * REV - The revision of the feature associated with this header.
+  * ID - The feature ID if Type is private feature.
+
+- Offset 0x08
+
+  * GUID_L - Least significant 64 bits of a 128-bit Globally Unique Identifier.
+
+- Offset 0x10
+
+  * GUID_H - Most significant 64 bits of a 128-bit Globally Unique Identifier.
+
+- Offset 0x18
+
+  * Reg Address/Offset - If Rel bit is set, then the value is the high 63 bits
+    of a 16-bit aligned absolute address of the feature's registers. Otherwise
+    the value is the offset from the start of the DFH of the feature's registers.
+
+- Offset 0x20
+
+  * Reg Size - Size of feature's register set in bytes.
+  * Params - Set if DFH has a list of parameter blocks.
+  * Group - Id of group if feature is part of a group.
+  * Instance - Id of feature instance within a group.
+
+- Offset 0x28 if feature has parameters
+
+  * Next - Offset to the next parameter block in 8 byte words. If EOP set,
+    size in 8 byte words of last parameter.
+  * Param Version - Version of Param ID.
+  * Param ID - ID of parameter.
+
+- Offset 0x30
+
+  * Parameter Data - Parameter data whose size and format is defined by
+    version and ID of the parameter.
+
+
 FIU - FME (FPGA Management Engine)
 ==================================
 The FPGA Management Engine performs reconfiguration and other infrastructure