| Message ID | 20221219191038.1973807-1-robh@kernel.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/2] dt-bindings: usb: snps,dwc3: Allow power-domains property | expand |
Hi, Rob Herring <robh@kernel.org> writes: > The Rockchip RK3399 DWC3 node has 'power-domain' property which isn't > allowed by the schema: > > usb@fe900000: Unevaluated properties are not allowed ('power-domains' was unexpected) > > Allow DWC3 nodes to have a single power-domains entry. We could instead > move the power-domains property to the parent wrapper node, but the > could be an ABI break (Linux shouldn't care). Also, we don't want to > encourage the pattern of wrapper nodes just to define resources such as > clocks, resets, power-domains, etc. when not necessary. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > index 6d78048c4613..bcefd1c2410a 100644 > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > @@ -91,6 +91,9 @@ properties: > - usb2-phy > - usb3-phy > > + power-domains: > + maxItems: 1 AFAICT this can be incorrect. Also, you could have Cc the dwc3 maintainer to get comments. @Thinh, how many power rails does dwc3 need? I don't have access to a databook anymore, but I have a vague memory that different parts of dwc3 could, potentially, be powered by completely separate supplies, no? Or is that only the case for clock domains in dwc3?
On Tue, Dec 20, 2022 at 1:34 AM Felipe Balbi <balbi@kernel.org> wrote: > > > Hi, > > Rob Herring <robh@kernel.org> writes: > > > The Rockchip RK3399 DWC3 node has 'power-domain' property which isn't > > allowed by the schema: > > > > usb@fe900000: Unevaluated properties are not allowed ('power-domains' was unexpected) > > > > Allow DWC3 nodes to have a single power-domains entry. We could instead > > move the power-domains property to the parent wrapper node, but the > > could be an ABI break (Linux shouldn't care). Also, we don't want to > > encourage the pattern of wrapper nodes just to define resources such as > > clocks, resets, power-domains, etc. when not necessary. > > > > Signed-off-by: Rob Herring <robh@kernel.org> > > --- > > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > index 6d78048c4613..bcefd1c2410a 100644 > > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > @@ -91,6 +91,9 @@ properties: > > - usb2-phy > > - usb3-phy > > > > + power-domains: > > + maxItems: 1 > > AFAICT this can be incorrect. Also, you could have Cc the dwc3 > maintainer to get comments. When we have a user with more and know what each one is, then we can extend it. All the other users (upstream), put 'power-domains' in the wrapper node. But this is what we need now for RK3399. I used get_maintainers.pl. If that's the wrong output, fix it please. Rob
Hi, Rob Herring <robh@kernel.org> writes: >> > The Rockchip RK3399 DWC3 node has 'power-domain' property which isn't >> > allowed by the schema: >> > >> > usb@fe900000: Unevaluated properties are not allowed ('power-domains' was unexpected) >> > >> > Allow DWC3 nodes to have a single power-domains entry. We could instead >> > move the power-domains property to the parent wrapper node, but the >> > could be an ABI break (Linux shouldn't care). Also, we don't want to >> > encourage the pattern of wrapper nodes just to define resources such as >> > clocks, resets, power-domains, etc. when not necessary. >> > >> > Signed-off-by: Rob Herring <robh@kernel.org> >> > --- >> > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ >> > 1 file changed, 3 insertions(+) >> > >> > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml >> > index 6d78048c4613..bcefd1c2410a 100644 >> > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml >> > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml >> > @@ -91,6 +91,9 @@ properties: >> > - usb2-phy >> > - usb3-phy >> > >> > + power-domains: >> > + maxItems: 1 >> >> AFAICT this can be incorrect. Also, you could have Cc the dwc3 >> maintainer to get comments. > > When we have a user with more and know what each one is, then we can > extend it. All the other users (upstream), put 'power-domains' in the Won't that be an ABI break at that point? You'll change the maximum number of power-domains. > wrapper node. But this is what we need now for RK3399. > > I used get_maintainers.pl. If that's the wrong output, fix it please. @Thinh, perhaps you should add dwc3 binding file to the list of maintained files for you?
On 23/12/2022 11:31, Felipe Balbi wrote: > > Hi, > > Rob Herring <robh@kernel.org> writes: >>>> The Rockchip RK3399 DWC3 node has 'power-domain' property which isn't >>>> allowed by the schema: >>>> >>>> usb@fe900000: Unevaluated properties are not allowed ('power-domains' was unexpected) >>>> >>>> Allow DWC3 nodes to have a single power-domains entry. We could instead >>>> move the power-domains property to the parent wrapper node, but the >>>> could be an ABI break (Linux shouldn't care). Also, we don't want to >>>> encourage the pattern of wrapper nodes just to define resources such as >>>> clocks, resets, power-domains, etc. when not necessary. >>>> >>>> Signed-off-by: Rob Herring <robh@kernel.org> >>>> --- >>>> Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ >>>> 1 file changed, 3 insertions(+) >>>> >>>> diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml >>>> index 6d78048c4613..bcefd1c2410a 100644 >>>> --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml >>>> +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml >>>> @@ -91,6 +91,9 @@ properties: >>>> - usb2-phy >>>> - usb3-phy >>>> >>>> + power-domains: >>>> + maxItems: 1 >>> >>> AFAICT this can be incorrect. Also, you could have Cc the dwc3 >>> maintainer to get comments. >> >> When we have a user with more and know what each one is, then we can >> extend it. All the other users (upstream), put 'power-domains' in the > > Won't that be an ABI break at that point? You'll change the maximum > number of power-domains. Usually extending properties (in flexible way) is not an ABI break. What would be broken here if it becomes three at some point? Does Linux or other SW depends now on this being equal to 1? Best regards, Krzysztof
Hi, On Fri, Dec 23, 2022, Felipe Balbi wrote: > > Hi, > > Rob Herring <robh@kernel.org> writes: > >> > The Rockchip RK3399 DWC3 node has 'power-domain' property which isn't > >> > allowed by the schema: > >> > > >> > usb@fe900000: Unevaluated properties are not allowed ('power-domains' was unexpected) > >> > > >> > Allow DWC3 nodes to have a single power-domains entry. We could instead > >> > move the power-domains property to the parent wrapper node, but the > >> > could be an ABI break (Linux shouldn't care). Also, we don't want to > >> > encourage the pattern of wrapper nodes just to define resources such as > >> > clocks, resets, power-domains, etc. when not necessary. > >> > > >> > Signed-off-by: Rob Herring <robh@kernel.org> > >> > --- > >> > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ > >> > 1 file changed, 3 insertions(+) > >> > > >> > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > >> > index 6d78048c4613..bcefd1c2410a 100644 > >> > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > >> > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > >> > @@ -91,6 +91,9 @@ properties: > >> > - usb2-phy > >> > - usb3-phy > >> > > >> > + power-domains: > >> > + maxItems: 1 > >> > >> AFAICT this can be incorrect. Also, you could have Cc the dwc3 > >> maintainer to get comments. Felipe is correct. We have 2 power-domains: Core domain and PMU. > > > > When we have a user with more and know what each one is, then we can > > extend it. All the other users (upstream), put 'power-domains' in the > > Won't that be an ABI break at that point? You'll change the maximum > number of power-domains. > > > wrapper node. But this is what we need now for RK3399. > > > > I used get_maintainers.pl. If that's the wrong output, fix it please. > > @Thinh, perhaps you should add dwc3 binding file to the list of > maintained files for you? > Sure, if makes sense to do so. If there's no objection, I can also maintain/review it. I can create a patch after coming back from my break in 2 weeks. Since I'm on a break at the moment, my response may be delayed. Thanks, Thinh
On Fri, Dec 23, 2022 at 5:57 PM Thinh Nguyen <Thinh.Nguyen@synopsys.com> wrote: > > Hi, > > On Fri, Dec 23, 2022, Felipe Balbi wrote: > > > > Hi, > > > > Rob Herring <robh@kernel.org> writes: > > >> > The Rockchip RK3399 DWC3 node has 'power-domain' property which isn't > > >> > allowed by the schema: > > >> > > > >> > usb@fe900000: Unevaluated properties are not allowed ('power-domains' was unexpected) > > >> > > > >> > Allow DWC3 nodes to have a single power-domains entry. We could instead > > >> > move the power-domains property to the parent wrapper node, but the > > >> > could be an ABI break (Linux shouldn't care). Also, we don't want to > > >> > encourage the pattern of wrapper nodes just to define resources such as > > >> > clocks, resets, power-domains, etc. when not necessary. > > >> > > > >> > Signed-off-by: Rob Herring <robh@kernel.org> > > >> > --- > > >> > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ > > >> > 1 file changed, 3 insertions(+) > > >> > > > >> > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > >> > index 6d78048c4613..bcefd1c2410a 100644 > > >> > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > >> > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > >> > @@ -91,6 +91,9 @@ properties: > > >> > - usb2-phy > > >> > - usb3-phy > > >> > > > >> > + power-domains: > > >> > + maxItems: 1 > > >> > > >> AFAICT this can be incorrect. Also, you could have Cc the dwc3 > > >> maintainer to get comments. > > Felipe is correct. We have 2 power-domains: Core domain and PMU. Power management unit? Performance management unit? That doesn't change that the rk3399 is 1 and we're stuck with it. So I can say 1 or 2 domains, or we add the 2nd domain when someone needs it. Rob
Hi, Rob Herring <robh@kernel.org> writes: > On Fri, Dec 23, 2022 at 5:57 PM Thinh Nguyen <Thinh.Nguyen@synopsys.com> wrote: >> > Rob Herring <robh@kernel.org> writes: >> > >> > The Rockchip RK3399 DWC3 node has 'power-domain' property which isn't >> > >> > allowed by the schema: >> > >> > >> > >> > usb@fe900000: Unevaluated properties are not allowed ('power-domains' was unexpected) >> > >> > >> > >> > Allow DWC3 nodes to have a single power-domains entry. We could instead >> > >> > move the power-domains property to the parent wrapper node, but the >> > >> > could be an ABI break (Linux shouldn't care). Also, we don't want to >> > >> > encourage the pattern of wrapper nodes just to define resources such as >> > >> > clocks, resets, power-domains, etc. when not necessary. >> > >> > >> > >> > Signed-off-by: Rob Herring <robh@kernel.org> >> > >> > --- >> > >> > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ >> > >> > 1 file changed, 3 insertions(+) >> > >> > >> > >> > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml >> > >> > index 6d78048c4613..bcefd1c2410a 100644 >> > >> > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml >> > >> > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml >> > >> > @@ -91,6 +91,9 @@ properties: >> > >> > - usb2-phy >> > >> > - usb3-phy >> > >> > >> > >> > + power-domains: >> > >> > + maxItems: 1 >> > >> >> > >> AFAICT this can be incorrect. Also, you could have Cc the dwc3 >> > >> maintainer to get comments. >> >> Felipe is correct. We have 2 power-domains: Core domain and PMU. > > Power management unit? Performance management unit? > > That doesn't change that the rk3399 is 1 and we're stuck with it. So I > can say 1 or 2 domains, or we add the 2nd domain when someone needs > it. Isn't the snps,dwc3.yaml document supposed to document dwc3's view of the world? In that case, dwc3 expects 2 power domains. It just so happens that in rk3399 they are fed from the same power supply, but dwc3' still thinks there are two of them. No? It's a similar situation when you have multiple clock domains with the same parent clock.
On Fri, Dec 30, 2022 at 2:43 AM Felipe Balbi <balbi@kernel.org> wrote: > > > Hi, > > Rob Herring <robh@kernel.org> writes: > > On Fri, Dec 23, 2022 at 5:57 PM Thinh Nguyen <Thinh.Nguyen@synopsys.com> wrote: > >> > Rob Herring <robh@kernel.org> writes: > >> > >> > The Rockchip RK3399 DWC3 node has 'power-domain' property which isn't > >> > >> > allowed by the schema: > >> > >> > > >> > >> > usb@fe900000: Unevaluated properties are not allowed ('power-domains' was unexpected) > >> > >> > > >> > >> > Allow DWC3 nodes to have a single power-domains entry. We could instead > >> > >> > move the power-domains property to the parent wrapper node, but the > >> > >> > could be an ABI break (Linux shouldn't care). Also, we don't want to > >> > >> > encourage the pattern of wrapper nodes just to define resources such as > >> > >> > clocks, resets, power-domains, etc. when not necessary. > >> > >> > > >> > >> > Signed-off-by: Rob Herring <robh@kernel.org> > >> > >> > --- > >> > >> > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ > >> > >> > 1 file changed, 3 insertions(+) > >> > >> > > >> > >> > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > >> > >> > index 6d78048c4613..bcefd1c2410a 100644 > >> > >> > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > >> > >> > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > >> > >> > @@ -91,6 +91,9 @@ properties: > >> > >> > - usb2-phy > >> > >> > - usb3-phy > >> > >> > > >> > >> > + power-domains: > >> > >> > + maxItems: 1 > >> > >> > >> > >> AFAICT this can be incorrect. Also, you could have Cc the dwc3 > >> > >> maintainer to get comments. > >> > >> Felipe is correct. We have 2 power-domains: Core domain and PMU. > > > > Power management unit? Performance management unit? > > > > That doesn't change that the rk3399 is 1 and we're stuck with it. So I > > can say 1 or 2 domains, or we add the 2nd domain when someone needs > > it. > > Isn't the snps,dwc3.yaml document supposed to document dwc3's view of > the world? In that case, dwc3 expects 2 power domains. It just so > happens that in rk3399 they are fed from the same power supply, but > dwc3' still thinks there are two of them. No? Yes. That is how bindings *should* be. However, RK3399 defined one PD long ago and it's an ABI. So we are stuck with it. Everyone else put power-domains in the parent because obviously the DWC3 has 0 power-domains. > It's a similar situation when you have multiple clock domains with the > same parent clock. Yes, that's a common problem in clock bindings too. Not really anything we can do about that other than require a detailed reference manual with every binding and someone (me) reviewing the manual against the binding. Neither of those are going to happen. Even on Arm Primecell blocks which clearly (and publicly) document the clocks, we've gotten these wrong (or .dts authors just didn't follow the binding). Rob
Hi, Rob Herring <robh@kernel.org> writes: >> >> > >> > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ >> >> > >> > 1 file changed, 3 insertions(+) >> >> > >> > >> >> > >> > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml >> >> > >> > index 6d78048c4613..bcefd1c2410a 100644 >> >> > >> > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml >> >> > >> > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml >> >> > >> > @@ -91,6 +91,9 @@ properties: >> >> > >> > - usb2-phy >> >> > >> > - usb3-phy >> >> > >> > >> >> > >> > + power-domains: >> >> > >> > + maxItems: 1 >> >> > >> >> >> > >> AFAICT this can be incorrect. Also, you could have Cc the dwc3 >> >> > >> maintainer to get comments. >> >> >> >> Felipe is correct. We have 2 power-domains: Core domain and PMU. >> > >> > Power management unit? Performance management unit? >> > >> > That doesn't change that the rk3399 is 1 and we're stuck with it. So I >> > can say 1 or 2 domains, or we add the 2nd domain when someone needs >> > it. >> >> Isn't the snps,dwc3.yaml document supposed to document dwc3's view of >> the world? In that case, dwc3 expects 2 power domains. It just so >> happens that in rk3399 they are fed from the same power supply, but >> dwc3' still thinks there are two of them. No? > > Yes. That is how bindings *should* be. However, RK3399 defined one PD > long ago and it's an ABI. So we are stuck with it. Everyone else put Are you confusing things, perhaps? DWC3, the block Synopsys licenses, has, as Thinh confirmed, 2 internal power domains. How OEMs (TI, Intel, Rockchip, Allwinner, etc) decide to integrate the IP into their systems is something different. That is part of the (so-called) wrapper. Different integrators will wrap Synopsys IP however they see fit, as long as they can provide a suitable translation layer between Synopsys own view of the world (its own interconnect implementation, of which there are 3 to choose from, IIRC) and the rest of the SoC. Perhaps what RK3399 did was provide a single power domain at the wrapper level that feeds both of DWC3's own power domains, but DWC3 itself still has 2 power domains, that's not something rockchip can change without risking the loss of support from Synopsys, as it would not be Synopsys IP anymore. > power-domains in the parent because obviously the DWC3 has 0 > power-domains. How did you come to this conclusion? >> It's a similar situation when you have multiple clock domains with the >> same parent clock. > > Yes, that's a common problem in clock bindings too. Not really > anything we can do about that other than require a detailed reference > manual with every binding and someone (me) reviewing the manual > against the binding. Neither of those are going to happen. Even on Arm > Primecell blocks which clearly (and publicly) document the clocks, > we've gotten these wrong (or .dts authors just didn't follow the > binding). Heh
On Fri, Dec 30, 2022 at 11:09 AM Felipe Balbi <balbi@kernel.org> wrote: > > > Hi, > > Rob Herring <robh@kernel.org> writes: > >> >> > >> > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ > >> >> > >> > 1 file changed, 3 insertions(+) > >> >> > >> > > >> >> > >> > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > >> >> > >> > index 6d78048c4613..bcefd1c2410a 100644 > >> >> > >> > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > >> >> > >> > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > >> >> > >> > @@ -91,6 +91,9 @@ properties: > >> >> > >> > - usb2-phy > >> >> > >> > - usb3-phy > >> >> > >> > > >> >> > >> > + power-domains: > >> >> > >> > + maxItems: 1 > >> >> > >> > >> >> > >> AFAICT this can be incorrect. Also, you could have Cc the dwc3 > >> >> > >> maintainer to get comments. > >> >> > >> >> Felipe is correct. We have 2 power-domains: Core domain and PMU. > >> > > >> > Power management unit? Performance management unit? > >> > > >> > That doesn't change that the rk3399 is 1 and we're stuck with it. So I > >> > can say 1 or 2 domains, or we add the 2nd domain when someone needs > >> > it. > >> > >> Isn't the snps,dwc3.yaml document supposed to document dwc3's view of > >> the world? In that case, dwc3 expects 2 power domains. It just so > >> happens that in rk3399 they are fed from the same power supply, but > >> dwc3' still thinks there are two of them. No? > > > > Yes. That is how bindings *should* be. However, RK3399 defined one PD > > long ago and it's an ABI. So we are stuck with it. Everyone else put > > Are you confusing things, perhaps? DWC3, the block Synopsys licenses, > has, as Thinh confirmed, 2 internal power domains. How OEMs (TI, Intel, > Rockchip, Allwinner, etc) decide to integrate the IP into their systems > is something different. That is part of the (so-called) > wrapper. Different integrators will wrap Synopsys IP however they see > fit, as long as they can provide a suitable translation layer between > Synopsys own view of the world (its own interconnect implementation, of > which there are 3 to choose from, IIRC) and the rest of the SoC. > > Perhaps what RK3399 did was provide a single power domain at the wrapper > level that feeds both of DWC3's own power domains, but DWC3 itself still > has 2 power domains, that's not something rockchip can change without > risking the loss of support from Synopsys, as it would not be Synopsys > IP anymore. Again, none of this matters. I'm documenting what is already in use and an ABI, not what is correct. The time for correctness was when this binding was added. To move forward, how about something like this: power-domains: description: Really there are 2 PDs, but some implementations defined a single PD. minItems: 1 items: - description: core - description: PMU We unfortunately can't constrain this to Rockchip in the schema because that specific information is in the parent node. (kind of crappy descriptions too, but that's the amount of information I have.) > > power-domains in the parent because obviously the DWC3 has 0 > > power-domains. > > How did you come to this conclusion? By testing the schema against the in tree .dts files. To date, no one other than Rockchip has power-domains in the DWC3 node. Rob
On Tue, Jan 03, 2023, Rob Herring wrote: > On Fri, Dec 30, 2022 at 11:09 AM Felipe Balbi <balbi@kernel.org> wrote: > > > > > > Hi, > > > > Rob Herring <robh@kernel.org> writes: > > >> >> > >> > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ > > >> >> > >> > 1 file changed, 3 insertions(+) > > >> >> > >> > > > >> >> > >> > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > >> >> > >> > index 6d78048c4613..bcefd1c2410a 100644 > > >> >> > >> > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > >> >> > >> > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > >> >> > >> > @@ -91,6 +91,9 @@ properties: > > >> >> > >> > - usb2-phy > > >> >> > >> > - usb3-phy > > >> >> > >> > > > >> >> > >> > + power-domains: > > >> >> > >> > + maxItems: 1 > > >> >> > >> > > >> >> > >> AFAICT this can be incorrect. Also, you could have Cc the dwc3 > > >> >> > >> maintainer to get comments. > > >> >> > > >> >> Felipe is correct. We have 2 power-domains: Core domain and PMU. > > >> > > > >> > Power management unit? Performance management unit? > > >> > > > >> > That doesn't change that the rk3399 is 1 and we're stuck with it. So I > > >> > can say 1 or 2 domains, or we add the 2nd domain when someone needs > > >> > it. > > >> > > >> Isn't the snps,dwc3.yaml document supposed to document dwc3's view of > > >> the world? In that case, dwc3 expects 2 power domains. It just so > > >> happens that in rk3399 they are fed from the same power supply, but > > >> dwc3' still thinks there are two of them. No? > > > > > > Yes. That is how bindings *should* be. However, RK3399 defined one PD > > > long ago and it's an ABI. So we are stuck with it. Everyone else put > > > > Are you confusing things, perhaps? DWC3, the block Synopsys licenses, > > has, as Thinh confirmed, 2 internal power domains. How OEMs (TI, Intel, > > Rockchip, Allwinner, etc) decide to integrate the IP into their systems > > is something different. That is part of the (so-called) > > wrapper. Different integrators will wrap Synopsys IP however they see > > fit, as long as they can provide a suitable translation layer between > > Synopsys own view of the world (its own interconnect implementation, of > > which there are 3 to choose from, IIRC) and the rest of the SoC. > > > > Perhaps what RK3399 did was provide a single power domain at the wrapper > > level that feeds both of DWC3's own power domains, but DWC3 itself still Just for some additional context/use case, the power to the PMU (power management unit) must always be on. If the device supports hibernation, in hibernation, the power supply to the core can be turned off. > > has 2 power domains, that's not something rockchip can change without > > risking the loss of support from Synopsys, as it would not be Synopsys > > IP anymore. > > Again, none of this matters. I'm documenting what is already in use > and an ABI, not what is correct. The time for correctness was when > this binding was added. That's unfortunate. That makes this very difficult to maintain if we can't rectify a mistake. > > To move forward, how about something like this: > > power-domains: > description: Really there are 2 PDs, but some implementations > defined a single PD. > minItems: 1 > items: > - description: core > - description: PMU > > We unfortunately can't constrain this to Rockchip in the schema > because that specific information is in the parent node. > > (kind of crappy descriptions too, but that's the amount of information I have.) Can we omit mentioning min or maxItems? While it may not be desired, it's not a hard requirement right? This can help avoid some confusion with devicetree documentation and dwc3 databook. Thanks, Thinh > > > > power-domains in the parent because obviously the DWC3 has 0 > > > power-domains. > > > > How did you come to this conclusion? > > By testing the schema against the in tree .dts files. To date, no one > other than Rockchip has power-domains in the DWC3 node. >
On Mon, Jan 9, 2023 at 1:40 PM Thinh Nguyen <Thinh.Nguyen@synopsys.com> wrote: > > On Tue, Jan 03, 2023, Rob Herring wrote: > > On Fri, Dec 30, 2022 at 11:09 AM Felipe Balbi <balbi@kernel.org> wrote: > > > > > > > > > Hi, > > > > > > Rob Herring <robh@kernel.org> writes: > > > >> >> > >> > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ > > > >> >> > >> > 1 file changed, 3 insertions(+) > > > >> >> > >> > > > > >> >> > >> > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > > >> >> > >> > index 6d78048c4613..bcefd1c2410a 100644 > > > >> >> > >> > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > > >> >> > >> > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > > >> >> > >> > @@ -91,6 +91,9 @@ properties: > > > >> >> > >> > - usb2-phy > > > >> >> > >> > - usb3-phy > > > >> >> > >> > > > > >> >> > >> > + power-domains: > > > >> >> > >> > + maxItems: 1 > > > >> >> > >> > > > >> >> > >> AFAICT this can be incorrect. Also, you could have Cc the dwc3 > > > >> >> > >> maintainer to get comments. > > > >> >> > > > >> >> Felipe is correct. We have 2 power-domains: Core domain and PMU. > > > >> > > > > >> > Power management unit? Performance management unit? > > > >> > > > > >> > That doesn't change that the rk3399 is 1 and we're stuck with it. So I > > > >> > can say 1 or 2 domains, or we add the 2nd domain when someone needs > > > >> > it. > > > >> > > > >> Isn't the snps,dwc3.yaml document supposed to document dwc3's view of > > > >> the world? In that case, dwc3 expects 2 power domains. It just so > > > >> happens that in rk3399 they are fed from the same power supply, but > > > >> dwc3' still thinks there are two of them. No? > > > > > > > > Yes. That is how bindings *should* be. However, RK3399 defined one PD > > > > long ago and it's an ABI. So we are stuck with it. Everyone else put > > > > > > Are you confusing things, perhaps? DWC3, the block Synopsys licenses, > > > has, as Thinh confirmed, 2 internal power domains. How OEMs (TI, Intel, > > > Rockchip, Allwinner, etc) decide to integrate the IP into their systems > > > is something different. That is part of the (so-called) > > > wrapper. Different integrators will wrap Synopsys IP however they see > > > fit, as long as they can provide a suitable translation layer between > > > Synopsys own view of the world (its own interconnect implementation, of > > > which there are 3 to choose from, IIRC) and the rest of the SoC. > > > > > > Perhaps what RK3399 did was provide a single power domain at the wrapper > > > level that feeds both of DWC3's own power domains, but DWC3 itself still > > Just for some additional context/use case, the power to the PMU (power > management unit) must always be on. If the device supports hibernation, > in hibernation, the power supply to the core can be turned off. Things in an always-on PD may or may not be described in 'power-domains', so from a DT perspective I would say 1 domain is perfectly valid here. I suppose the PMU could be in a PD which can be gated off, but any hibernation features would be lost. > > > has 2 power domains, that's not something rockchip can change without > > > risking the loss of support from Synopsys, as it would not be Synopsys > > > IP anymore. > > > > Again, none of this matters. I'm documenting what is already in use > > and an ABI, not what is correct. The time for correctness was when > > this binding was added. > > That's unfortunate. That makes this very difficult to maintain if we > can't rectify a mistake. Shrug. What's unfortunate is only a limited number of people can review bindings to be correct in this aspect. And I'm not one of them. We deal with this all the time already. It's just amplified when it is shared IP. Would I like less variation? Yes, but it's not a showstopper. > > To move forward, how about something like this: > > > > power-domains: > > description: Really there are 2 PDs, but some implementations > > defined a single PD. > > minItems: 1 > > items: > > - description: core > > - description: PMU > > > > We unfortunately can't constrain this to Rockchip in the schema > > because that specific information is in the parent node. > > > > (kind of crappy descriptions too, but that's the amount of information I have.) > > Can we omit mentioning min or maxItems? While it may not be desired, > it's not a hard requirement right? This can help avoid some confusion > with devicetree documentation and dwc3 databook. Why? Don't you want to catch someone defining 3 domains? Rob
On Mon, Jan 09, 2023, Rob Herring wrote: > On Mon, Jan 9, 2023 at 1:40 PM Thinh Nguyen <Thinh.Nguyen@synopsys.com> wrote: > > > > On Tue, Jan 03, 2023, Rob Herring wrote: > > > On Fri, Dec 30, 2022 at 11:09 AM Felipe Balbi <balbi@kernel.org> wrote: > > > > > > > > > > > > Hi, > > > > > > > > Rob Herring <robh@kernel.org> writes: > > > > >> >> > >> > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ > > > > >> >> > >> > 1 file changed, 3 insertions(+) > > > > >> >> > >> > > > > > >> >> > >> > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > > > >> >> > >> > index 6d78048c4613..bcefd1c2410a 100644 > > > > >> >> > >> > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > > > >> >> > >> > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > > > >> >> > >> > @@ -91,6 +91,9 @@ properties: > > > > >> >> > >> > - usb2-phy > > > > >> >> > >> > - usb3-phy > > > > >> >> > >> > > > > > >> >> > >> > + power-domains: > > > > >> >> > >> > + maxItems: 1 > > > > >> >> > >> > > > > >> >> > >> AFAICT this can be incorrect. Also, you could have Cc the dwc3 > > > > >> >> > >> maintainer to get comments. > > > > >> >> > > > > >> >> Felipe is correct. We have 2 power-domains: Core domain and PMU. > > > > >> > > > > > >> > Power management unit? Performance management unit? > > > > >> > > > > > >> > That doesn't change that the rk3399 is 1 and we're stuck with it. So I > > > > >> > can say 1 or 2 domains, or we add the 2nd domain when someone needs > > > > >> > it. > > > > >> > > > > >> Isn't the snps,dwc3.yaml document supposed to document dwc3's view of > > > > >> the world? In that case, dwc3 expects 2 power domains. It just so > > > > >> happens that in rk3399 they are fed from the same power supply, but > > > > >> dwc3' still thinks there are two of them. No? > > > > > > > > > > Yes. That is how bindings *should* be. However, RK3399 defined one PD > > > > > long ago and it's an ABI. So we are stuck with it. Everyone else put > > > > > > > > Are you confusing things, perhaps? DWC3, the block Synopsys licenses, > > > > has, as Thinh confirmed, 2 internal power domains. How OEMs (TI, Intel, > > > > Rockchip, Allwinner, etc) decide to integrate the IP into their systems > > > > is something different. That is part of the (so-called) > > > > wrapper. Different integrators will wrap Synopsys IP however they see > > > > fit, as long as they can provide a suitable translation layer between > > > > Synopsys own view of the world (its own interconnect implementation, of > > > > which there are 3 to choose from, IIRC) and the rest of the SoC. > > > > > > > > Perhaps what RK3399 did was provide a single power domain at the wrapper > > > > level that feeds both of DWC3's own power domains, but DWC3 itself still > > > > Just for some additional context/use case, the power to the PMU (power > > management unit) must always be on. If the device supports hibernation, > > in hibernation, the power supply to the core can be turned off. > > Things in an always-on PD may or may not be described in I'm just providing additional info, and not everything is necessarily needed for the DT description. > 'power-domains', so from a DT perspective I would say 1 domain is > perfectly valid here. > > I suppose the PMU could be in a PD which can be gated off, but any > hibernation features would be lost. > Some devices have both the core and the PMU in the same power domain, which may be the case for RK3399. However, the PMUs may be implemented in a separate power rail than the core. > > > > has 2 power domains, that's not something rockchip can change without > > > > risking the loss of support from Synopsys, as it would not be Synopsys > > > > IP anymore. > > > > > > Again, none of this matters. I'm documenting what is already in use > > > and an ABI, not what is correct. The time for correctness was when > > > this binding was added. > > > > That's unfortunate. That makes this very difficult to maintain if we > > can't rectify a mistake. > > Shrug. What's unfortunate is only a limited number of people can > review bindings to be correct in this aspect. And I'm not one of them. > > We deal with this all the time already. It's just amplified when it is > shared IP. Would I like less variation? Yes, but it's not a > showstopper. > > > > To move forward, how about something like this: > > > > > > power-domains: > > > description: Really there are 2 PDs, but some implementations > > > defined a single PD. > > > minItems: 1 > > > items: > > > - description: core > > > - description: PMU > > > > > > We unfortunately can't constrain this to Rockchip in the schema > > > because that specific information is in the parent node. > > > > > > (kind of crappy descriptions too, but that's the amount of information I have.) > > > > Can we omit mentioning min or maxItems? While it may not be desired, > > it's not a hard requirement right? This can help avoid some confusion > > with devicetree documentation and dwc3 databook. > > Why? Don't you want to catch someone defining 3 domains? > My concern was more about "maxItems: 1" may cause some confusion. If we can't say "maxItems: 2", omitting it or using "minItems: 1" seems to be a better option. As you mentioned, we can't do much about it now that it's part of the DT. I've provided the info you need to make the appropriate change. Looks like there's no perfect solution. Please make the change you see best fit. Thanks, Thinh
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 6d78048c4613..bcefd1c2410a 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -91,6 +91,9 @@ properties: - usb2-phy - usb3-phy + power-domains: + maxItems: 1 + resets: minItems: 1
The Rockchip RK3399 DWC3 node has 'power-domain' property which isn't allowed by the schema: usb@fe900000: Unevaluated properties are not allowed ('power-domains' was unexpected) Allow DWC3 nodes to have a single power-domains entry. We could instead move the power-domains property to the parent wrapper node, but the could be an ABI break (Linux shouldn't care). Also, we don't want to encourage the pattern of wrapper nodes just to define resources such as clocks, resets, power-domains, etc. when not necessary. Signed-off-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 3 +++ 1 file changed, 3 insertions(+)