| Message ID | 20230103182229.37169-2-bmasney@redhat.com (mailing list archive) |
|---|---|
| State | Rejected |
| Headers | show |
| Series | dts: qcom: sc8280xp: add i2c, spi, and rng nodes | expand |
On Tue, 03 Jan 2023 13:22:20 -0500, Brian Masney wrote: > Move the #address-cells and #size-cells properties on the existing > i2c/spi example nodes below the reg property so that all of the > address-related properties are grouped together. > > Signed-off-by: Brian Masney <bmasney@redhat.com> > Link: https://lore.kernel.org/lkml/Y6Wnh+tXPhF6aC1b@hovoldconsulting.com/ > --- > New patch introduced in v4 > > .../devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml | 4 ++-- > .../devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 4 ++-- > .../devicetree/bindings/spi/qcom,spi-geni-qcom.yaml | 8 ++++---- > 3 files changed, 8 insertions(+), 8 deletions(-) > Acked-by: Rob Herring <robh@kernel.org>
On 03/01/2023 19:22, Brian Masney wrote: > Move the #address-cells and #size-cells properties on the existing > i2c/spi example nodes below the reg property so that all of the > address-related properties are grouped together. > > Signed-off-by: Brian Masney <bmasney@redhat.com> > Link: https://lore.kernel.org/lkml/Y6Wnh+tXPhF6aC1b@hovoldconsulting.com/ We do not have conclusion where these should be, so don't make any changes. https://github.com/konradybcio-work/dt_review Best regards, Krzysztof
On Tue, Jan 10, 2023 at 11:41:14AM +0100, Krzysztof Kozlowski wrote: > On 03/01/2023 19:22, Brian Masney wrote: > > Move the #address-cells and #size-cells properties on the existing > > i2c/spi example nodes below the reg property so that all of the > > address-related properties are grouped together. > > > > Signed-off-by: Brian Masney <bmasney@redhat.com> > > Link: https://lore.kernel.org/lkml/Y6Wnh+tXPhF6aC1b@hovoldconsulting.com/ > > We do not have conclusion where these should be, so don't make any changes. > > https://github.com/konradybcio-work/dt_review OK, let's just drop patches 1 and 2 in this series then. Patches 3-10 should be ready for merge. Brian
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml index f5f7dc8f325c..594bf810a4aa 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml @@ -127,13 +127,13 @@ examples: i2c@88000 { compatible = "qcom,geni-i2c"; reg = <0x00880000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c0_default>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index ab4df0205285..d6128fb7d361 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -137,14 +137,14 @@ examples: i2c0: i2c@a94000 { compatible = "qcom,geni-i2c"; reg = <0 0xa94000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&qup_1_i2c_5_active>; pinctrl-1 = <&qup_1_i2c_5_sleep>; - #address-cells = <1>; - #size-cells = <0>; }; uart0: serial@a88000 { diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml index 2e20ca313ec1..efa7f52941f8 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml @@ -85,13 +85,13 @@ examples: spi@880000 { compatible = "qcom,geni-spi"; reg = <0x00880000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi0_default>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, @@ -105,6 +105,8 @@ examples: spi@884000 { compatible = "qcom,geni-spi"; reg = <0x00884000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, @@ -113,6 +115,4 @@ examples: pinctrl-names = "default"; pinctrl-0 = <&qup_spi1_default>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; };
Move the #address-cells and #size-cells properties on the existing i2c/spi example nodes below the reg property so that all of the address-related properties are grouped together. Signed-off-by: Brian Masney <bmasney@redhat.com> Link: https://lore.kernel.org/lkml/Y6Wnh+tXPhF6aC1b@hovoldconsulting.com/ --- New patch introduced in v4 .../devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml | 4 ++-- .../devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 4 ++-- .../devicetree/bindings/spi/qcom,spi-geni-qcom.yaml | 8 ++++---- 3 files changed, 8 insertions(+), 8 deletions(-)