diff mbox series

[1/3] arm64: dts: qcom: sm8250: Pad addresses to 8 hex digits

Message ID 20221230135044.287874-1-konrad.dybcio@linaro.org (mailing list archive)
State Accepted
Commit d8b4ee9379e4b6df44bbaf6020461514b401b8f6
Headers show
Series [1/3] arm64: dts: qcom: sm8250: Pad addresses to 8 hex digits | expand

Commit Message

Konrad Dybcio Dec. 30, 2022, 1:50 p.m. UTC 
Some addresses were 7-hex-digits long. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Bjorn Andersson Jan. 11, 2023, 5:09 a.m. UTC | #1 
On Fri, 30 Dec 2022 14:50:42 +0100, Konrad Dybcio wrote:
> Some addresses were 7-hex-digits long. Fix that.
> 
> 

Applied, thanks!

[1/3] arm64: dts: qcom: sm8250: Pad addresses to 8 hex digits
      commit: d8b4ee9379e4b6df44bbaf6020461514b401b8f6

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index a3aa85a32bf8..3b3ea380c6e6 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2284,7 +2284,7 @@  rxmacro: rxmacro@3200000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&rx_swr_active>;
 			compatible = "qcom,sm8250-lpass-rx-macro";
-			reg = <0 0x3200000 0 0x1000>;
+			reg = <0 0x03200000 0 0x1000>;
 			status = "disabled";
 
 			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2302,7 +2302,7 @@  rxmacro: rxmacro@3200000 {
 		};
 
 		swr1: soundwire-controller@3210000 {
-			reg = <0 0x3210000 0 0x2000>;
+			reg = <0 0x03210000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			status = "disabled";
 			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
@@ -2331,7 +2331,7 @@  txmacro: txmacro@3220000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&tx_swr_active>;
 			compatible = "qcom,sm8250-lpass-tx-macro";
-			reg = <0 0x3220000 0 0x1000>;
+			reg = <0 0x03220000 0 0x1000>;
 			status = "disabled";
 
 			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2352,7 +2352,7 @@  txmacro: txmacro@3220000 {
 
 		/* tx macro */
 		swr2: soundwire-controller@3230000 {
-			reg = <0 0x3230000 0 0x2000>;
+			reg = <0 0x03230000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core";