| Message ID | 20230118150904.26913-2-manivannan.sadhasivam@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Qcom: LLCC/EDAC: Fix base address used for LLCC banks | expand |
On Wed, Jan 18, 2023 at 08:38:48PM +0530, Manivannan Sadhasivam wrote: > The EDAC drivers may optionally pass the poll_msec value. Use that value > if available, else fall back to 1000ms. > > [ bp: Touchups. ] > > Fixes: e27e3dac6517 ("drivers/edac: add edac_device class") > Reported-by: Luca Weiss <luca.weiss@fairphone.com> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Your S-o-b should be the last one to indicate that you are the one certifying the origin of this patch. > Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> If the two of you wrote the patch, please add a Co-developed-by. Thanks, Bjorn > Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s > Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride > Cc: <stable@vger.kernel.org> # 4.9 > Link: https://lore.kernel.org/r/COZYL8MWN97H.MROQ391BGA09@otso > --- > drivers/edac/edac_device.c | 15 +++++++-------- > 1 file changed, 7 insertions(+), 8 deletions(-) > > diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c > index 19522c568aa5..a50b7bcfb731 100644 > --- a/drivers/edac/edac_device.c > +++ b/drivers/edac/edac_device.c > @@ -34,6 +34,9 @@ > static DEFINE_MUTEX(device_ctls_mutex); > static LIST_HEAD(edac_device_list); > > +/* Default workqueue processing interval on this instance, in msecs */ > +#define DEFAULT_POLL_INTERVAL 1000 > + > #ifdef CONFIG_EDAC_DEBUG > static void edac_device_dump_device(struct edac_device_ctl_info *edac_dev) > { > @@ -336,7 +339,7 @@ static void edac_device_workq_function(struct work_struct *work_req) > * whole one second to save timers firing all over the period > * between integral seconds > */ > - if (edac_dev->poll_msec == 1000) > + if (edac_dev->poll_msec == DEFAULT_POLL_INTERVAL) > edac_queue_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay)); > else > edac_queue_work(&edac_dev->work, edac_dev->delay); > @@ -366,7 +369,7 @@ static void edac_device_workq_setup(struct edac_device_ctl_info *edac_dev, > * timers firing on sub-second basis, while they are happy > * to fire together on the 1 second exactly > */ > - if (edac_dev->poll_msec == 1000) > + if (edac_dev->poll_msec == DEFAULT_POLL_INTERVAL) > edac_queue_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay)); > else > edac_queue_work(&edac_dev->work, edac_dev->delay); > @@ -398,7 +401,7 @@ void edac_device_reset_delay_period(struct edac_device_ctl_info *edac_dev, > { > unsigned long jiffs = msecs_to_jiffies(value); > > - if (value == 1000) > + if (value == DEFAULT_POLL_INTERVAL) > jiffs = round_jiffies_relative(value); > > edac_dev->poll_msec = value; > @@ -443,11 +446,7 @@ int edac_device_add_device(struct edac_device_ctl_info *edac_dev) > /* This instance is NOW RUNNING */ > edac_dev->op_state = OP_RUNNING_POLL; > > - /* > - * enable workq processing on this instance, > - * default = 1000 msec > - */ > - edac_device_workq_setup(edac_dev, 1000); > + edac_device_workq_setup(edac_dev, edac_dev->poll_msec ?: DEFAULT_POLL_INTERVAL); > } else { > edac_dev->op_state = OP_RUNNING_INTERRUPT; > } > -- > 2.25.1 >
On Wed, Jan 18, 2023 at 11:46:25AM -0600, Bjorn Andersson wrote: > On Wed, Jan 18, 2023 at 08:38:48PM +0530, Manivannan Sadhasivam wrote: > > The EDAC drivers may optionally pass the poll_msec value. Use that value > > if available, else fall back to 1000ms. > > > > [ bp: Touchups. ] > > > > Fixes: e27e3dac6517 ("drivers/edac: add edac_device class") > > Reported-by: Luca Weiss <luca.weiss@fairphone.com> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > > Your S-o-b should be the last one to indicate that you are the one > certifying the origin of this patch. I took his and massaged it a bit. I'll fix up the order properly when applying. Thx.
On Wed, Jan 18, 2023 at 08:38:48PM +0530, Manivannan Sadhasivam wrote: > The EDAC drivers may optionally pass the poll_msec value. Use that value > if available, else fall back to 1000ms. > > [ bp: Touchups. ] > > Fixes: e27e3dac6517 ("drivers/edac: add edac_device class") > Reported-by: Luca Weiss <luca.weiss@fairphone.com> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> > Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s > Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride > Cc: <stable@vger.kernel.org> # 4.9 > Link: https://lore.kernel.org/r/COZYL8MWN97H.MROQ391BGA09@otso > --- > drivers/edac/edac_device.c | 15 +++++++-------- > 1 file changed, 7 insertions(+), 8 deletions(-) Applied, thanks.
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c index 19522c568aa5..a50b7bcfb731 100644 --- a/drivers/edac/edac_device.c +++ b/drivers/edac/edac_device.c @@ -34,6 +34,9 @@ static DEFINE_MUTEX(device_ctls_mutex); static LIST_HEAD(edac_device_list); +/* Default workqueue processing interval on this instance, in msecs */ +#define DEFAULT_POLL_INTERVAL 1000 + #ifdef CONFIG_EDAC_DEBUG static void edac_device_dump_device(struct edac_device_ctl_info *edac_dev) { @@ -336,7 +339,7 @@ static void edac_device_workq_function(struct work_struct *work_req) * whole one second to save timers firing all over the period * between integral seconds */ - if (edac_dev->poll_msec == 1000) + if (edac_dev->poll_msec == DEFAULT_POLL_INTERVAL) edac_queue_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay)); else edac_queue_work(&edac_dev->work, edac_dev->delay); @@ -366,7 +369,7 @@ static void edac_device_workq_setup(struct edac_device_ctl_info *edac_dev, * timers firing on sub-second basis, while they are happy * to fire together on the 1 second exactly */ - if (edac_dev->poll_msec == 1000) + if (edac_dev->poll_msec == DEFAULT_POLL_INTERVAL) edac_queue_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay)); else edac_queue_work(&edac_dev->work, edac_dev->delay); @@ -398,7 +401,7 @@ void edac_device_reset_delay_period(struct edac_device_ctl_info *edac_dev, { unsigned long jiffs = msecs_to_jiffies(value); - if (value == 1000) + if (value == DEFAULT_POLL_INTERVAL) jiffs = round_jiffies_relative(value); edac_dev->poll_msec = value; @@ -443,11 +446,7 @@ int edac_device_add_device(struct edac_device_ctl_info *edac_dev) /* This instance is NOW RUNNING */ edac_dev->op_state = OP_RUNNING_POLL; - /* - * enable workq processing on this instance, - * default = 1000 msec - */ - edac_device_workq_setup(edac_dev, 1000); + edac_device_workq_setup(edac_dev, edac_dev->poll_msec ?: DEFAULT_POLL_INTERVAL); } else { edac_dev->op_state = OP_RUNNING_INTERRUPT; }
The EDAC drivers may optionally pass the poll_msec value. Use that value if available, else fall back to 1000ms. [ bp: Touchups. ] Fixes: e27e3dac6517 ("drivers/edac: add edac_device class") Reported-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride Cc: <stable@vger.kernel.org> # 4.9 Link: https://lore.kernel.org/r/COZYL8MWN97H.MROQ391BGA09@otso --- drivers/edac/edac_device.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)