| Message ID | 20230127194057.186458-9-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: phy/samsung: move MIPI and DP phys under PMU | expand |
On 27.01.2023 20:40, Krzysztof Kozlowski wrote: > The MIPI phy is actually part of the Power Management Unit system > controller. It does not have own address space, thus keeping the node > under soc causes warnings: > > exynos5433-tm2e.dtb: soc@0: video-phy: {'compatible': ['samsung,exynos5433-mipi-video-phy'], ... > should not be valid under {'type': 'object'} > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 19 +++++++++---------- > 1 file changed, 9 insertions(+), 10 deletions(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > index 9da24fe958a3..842976addbd9 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -911,12 +911,20 @@ pinctrl_touch: pinctrl@14ce0000 { > }; > > pmu_system_controller: system-controller@105c0000 { > - compatible = "samsung,exynos5433-pmu", "syscon"; > + compatible = "samsung,exynos5433-pmu", "simple-mfd", "syscon"; > reg = <0x105c0000 0x5008>; > #clock-cells = <1>; > clock-names = "clkout16"; > clocks = <&xxti>; > > + mipi_phy: mipi-phy { > + compatible = "samsung,exynos5433-mipi-video-phy"; > + #phy-cells = <1>; > + samsung,cam0-sysreg = <&syscon_cam0>; > + samsung,cam1-sysreg = <&syscon_cam1>; > + samsung,disp-sysreg = <&syscon_disp>; > + }; > + > reboot: syscon-reboot { > compatible = "syscon-reboot"; > regmap = <&pmu_system_controller>; > @@ -936,15 +944,6 @@ gic: interrupt-controller@11001000 { > interrupts = <GIC_PPI 9 0xf04>; > }; > > - mipi_phy: video-phy { > - compatible = "samsung,exynos5433-mipi-video-phy"; > - #phy-cells = <1>; > - samsung,pmu-syscon = <&pmu_system_controller>; > - samsung,cam0-sysreg = <&syscon_cam0>; > - samsung,cam1-sysreg = <&syscon_cam1>; > - samsung,disp-sysreg = <&syscon_disp>; > - }; > - > decon: decon@13800000 { > compatible = "samsung,exynos5433-decon"; > reg = <0x13800000 0x2104>; Best regards
On Fri, 27 Jan 2023 20:40:57 +0100, Krzysztof Kozlowski wrote: > The MIPI phy is actually part of the Power Management Unit system > controller. It does not have own address space, thus keeping the node > under soc causes warnings: > > exynos5433-tm2e.dtb: soc@0: video-phy: {'compatible': ['samsung,exynos5433-mipi-video-phy'], ... > should not be valid under {'type': 'object'} > > [...] Applied, thanks! [8/8] arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433 https://git.kernel.org/krzk/linux/c/2a9c708411834661e5b0ffb817a8f82f1a2f108e Best regards,
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 9da24fe958a3..842976addbd9 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -911,12 +911,20 @@ pinctrl_touch: pinctrl@14ce0000 { }; pmu_system_controller: system-controller@105c0000 { - compatible = "samsung,exynos5433-pmu", "syscon"; + compatible = "samsung,exynos5433-pmu", "simple-mfd", "syscon"; reg = <0x105c0000 0x5008>; #clock-cells = <1>; clock-names = "clkout16"; clocks = <&xxti>; + mipi_phy: mipi-phy { + compatible = "samsung,exynos5433-mipi-video-phy"; + #phy-cells = <1>; + samsung,cam0-sysreg = <&syscon_cam0>; + samsung,cam1-sysreg = <&syscon_cam1>; + samsung,disp-sysreg = <&syscon_disp>; + }; + reboot: syscon-reboot { compatible = "syscon-reboot"; regmap = <&pmu_system_controller>; @@ -936,15 +944,6 @@ gic: interrupt-controller@11001000 { interrupts = <GIC_PPI 9 0xf04>; }; - mipi_phy: video-phy { - compatible = "samsung,exynos5433-mipi-video-phy"; - #phy-cells = <1>; - samsung,pmu-syscon = <&pmu_system_controller>; - samsung,cam0-sysreg = <&syscon_cam0>; - samsung,cam1-sysreg = <&syscon_cam1>; - samsung,disp-sysreg = <&syscon_disp>; - }; - decon: decon@13800000 { compatible = "samsung,exynos5433-decon"; reg = <0x13800000 0x2104>;
The MIPI phy is actually part of the Power Management Unit system controller. It does not have own address space, thus keeping the node under soc causes warnings: exynos5433-tm2e.dtb: soc@0: video-phy: {'compatible': ['samsung,exynos5433-mipi-video-phy'], ... should not be valid under {'type': 'object'} Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-)