| Message ID | 20230130125528.11509-7-quic_devipriy@quicinc.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | Add minimal boot support for IPQ9574 | expand |
On 30.01.2023 13:55, devi priya wrote: > Add initial device tree support for Qualcomm IPQ9574 SoC > and AL02 board > > Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> > Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> > Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> > Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> > Signed-off-by: devi priya <quic_devipriy@quicinc.com> > --- > Changes in V3: > - Updated the order of signed-offs > > Changes in V2: > - Updated the node name - emmc_pins to sdc_default_state > - Moved the xo and sleep clock frequency to board DT > - Removed the pipe clock definitions > - Dropped clock frequency property for timer nodes > - Added qcom,ipq9574-sdhci compatible string > - Updated the copyright year to 2023 > - Corrected the indentations > > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 78 +++++ > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 285 +++++++++++++++++++ > 3 files changed, 364 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts > create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index b0423ca3e79f..ff40e86181d4 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb > +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb > diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts > new file mode 100644 > index 000000000000..4aa06e4f63c7 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts > @@ -0,0 +1,78 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * IPQ9574 AL02-C7 board device tree source > + * > + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. > + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "ipq9574.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; > + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; > + > + aliases { > + serial0 = &blsp1_uart2; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&blsp1_uart2 { > + pinctrl-0 = <&uart2_pins>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&sdhc_1 { > + pinctrl-0 = <&sdc_default_state>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&sleep_clk { > + clock-frequency = <32000>; > +}; > + > +&tlmm { > + sdc_default_state: sdc-default-state { > + clk-pins { > + pins = "gpio5"; > + function = "sdc_clk"; > + drive-strength = <8>; > + bias-disable; > + }; > + > + cmd-pins { > + pins = "gpio4"; > + function = "sdc_cmd"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + > + data-pins { > + pins = "gpio0", "gpio1", "gpio2", > + "gpio3", "gpio6", "gpio7", > + "gpio8", "gpio9"; The second and third rows are still incorrectly indented. > + function = "sdc_data"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + > + rclk-pins { > + pins = "gpio10"; > + function = "sdc_rclk"; > + drive-strength = <8>; > + bias-pull-down; > + }; > + }; [...] > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + tz_region: memory@4a600000 { tz@ > + reg = <0x0 0x4a600000 0x0 0x400000>; > + no-map; > + }; > + }; > + > + soc: soc@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0 0 0xffffffff>; > + compatible = "simple-bus"; compatible first, please > + > + tlmm: pinctrl@1000000 { > + compatible = "qcom,ipq9574-tlmm"; > + reg = <0x01000000 0x300000>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&tlmm 0 0 65>; > + gpio-reserved-ranges = <59 1>; It's reserved in the pinctrl driver, no need to do it again here. > + interrupt-controller; > + #interrupt-cells = <2>; > + > + uart2_pins: uart2-state { > + pins = "gpio34", "gpio35"; [...] > + > + intc: interrupt-controller@b000000 { > + compatible = "qcom,msm-qgic2"; > + reg = <0x0b000000 0x1000>, /* GICD */ > + <0x0b002000 0x1000>, /* GICC */ > + <0x0b001000 0x1000>, /* GICH */ > + <0x0b004000 0x1000>; /* GICV */ > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-controller; > + #interrupt-cells = <3>; > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + ranges = <0 0x0b00c000 0x3000>; > + > + v2m0: v2m@0 { > + compatible = "arm,gic-v2m-frame"; > + reg = <0x0 0xffd>; > + msi-controller; > + }; > + > + v2m1: v2m@1 { > + compatible = "arm,gic-v2m-frame"; > + reg = <0x00001000 0xffd>; Unit address must match the address part of the reg property. > + msi-controller; > + }; > + > + v2m2: v2m@2 { And here. Konrad > + compatible = "arm,gic-v2m-frame"; > + reg = <0x00002000 0xffd>; > + msi-controller; > + }; > + }; > + > + timer@b120000 { > + compatible = "arm,armv7-timer-mem"; > + reg = <0x0b120000 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + frame@b120000 { > + reg = <0x0b121000 0x1000>, > + <0x0b122000 0x1000>; > + frame-number = <0>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + frame@b123000 { > + reg = <0x0b123000 0x1000>; > + frame-number = <1>; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + frame@b124000 { > + reg = <0x0b124000 0x1000>; > + frame-number = <2>; > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + frame@b125000 { > + reg = <0x0b125000 0x1000>; > + frame-number = <3>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + frame@b126000 { > + reg = <0x0b126000 0x1000>; > + frame-number = <4>; > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + frame@b127000 { > + reg = <0x0b127000 0x1000>; > + frame-number = <5>; > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + frame@b128000 { > + reg = <0x0b128000 0x1000>; > + frame-number = <6>; > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + }; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > + }; > +};
On 1/31/2023 5:25 AM, Konrad Dybcio wrote: > > > On 30.01.2023 13:55, devi priya wrote: >> Add initial device tree support for Qualcomm IPQ9574 SoC >> and AL02 board >> >> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> >> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> >> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >> Signed-off-by: devi priya <quic_devipriy@quicinc.com> >> --- >> Changes in V3: >> - Updated the order of signed-offs >> >> Changes in V2: >> - Updated the node name - emmc_pins to sdc_default_state >> - Moved the xo and sleep clock frequency to board DT >> - Removed the pipe clock definitions >> - Dropped clock frequency property for timer nodes >> - Added qcom,ipq9574-sdhci compatible string >> - Updated the copyright year to 2023 >> - Corrected the indentations >> >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 78 +++++ >> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 285 +++++++++++++++++++ >> 3 files changed, 364 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts >> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index b0423ca3e79f..ff40e86181d4 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb >> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts >> new file mode 100644 >> index 000000000000..4aa06e4f63c7 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts >> @@ -0,0 +1,78 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >> +/* >> + * IPQ9574 AL02-C7 board device tree source >> + * >> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. >> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include "ipq9574.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; >> + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; >> + >> + aliases { >> + serial0 = &blsp1_uart2; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&blsp1_uart2 { >> + pinctrl-0 = <&uart2_pins>; >> + pinctrl-names = "default"; >> + status = "okay"; >> +}; >> + >> +&sdhc_1 { >> + pinctrl-0 = <&sdc_default_state>; >> + pinctrl-names = "default"; >> + status = "okay"; >> +}; >> + >> +&sleep_clk { >> + clock-frequency = <32000>; >> +}; >> + >> +&tlmm { >> + sdc_default_state: sdc-default-state { >> + clk-pins { >> + pins = "gpio5"; >> + function = "sdc_clk"; >> + drive-strength = <8>; >> + bias-disable; >> + }; >> + >> + cmd-pins { >> + pins = "gpio4"; >> + function = "sdc_cmd"; >> + drive-strength = <8>; >> + bias-pull-up; >> + }; >> + >> + data-pins { >> + pins = "gpio0", "gpio1", "gpio2", >> + "gpio3", "gpio6", "gpio7", >> + "gpio8", "gpio9"; > The second and third rows are still incorrectly indented. okay. will correct it. > >> + function = "sdc_data"; >> + drive-strength = <8>; >> + bias-pull-up; >> + }; >> + >> + rclk-pins { >> + pins = "gpio10"; >> + function = "sdc_rclk"; >> + drive-strength = <8>; >> + bias-pull-down; >> + }; >> + }; > > [...] > >> + reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + tz_region: memory@4a600000 { > tz@ > Sure >> + reg = <0x0 0x4a600000 0x0 0x400000>; >> + no-map; >> + }; >> + }; >> + >> + soc: soc@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges = <0 0 0 0xffffffff>; >> + compatible = "simple-bus"; > compatible first, please > Sure, okay >> + >> + tlmm: pinctrl@1000000 { >> + compatible = "qcom,ipq9574-tlmm"; >> + reg = <0x01000000 0x300000>; >> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + gpio-ranges = <&tlmm 0 0 65>; >> + gpio-reserved-ranges = <59 1>; > It's reserved in the pinctrl driver, no need to do it again here. > Okay, got it. > >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + >> + uart2_pins: uart2-state { >> + pins = "gpio34", "gpio35"; > > [...] > >> + >> + intc: interrupt-controller@b000000 { >> + compatible = "qcom,msm-qgic2"; >> + reg = <0x0b000000 0x1000>, /* GICD */ >> + <0x0b002000 0x1000>, /* GICC */ >> + <0x0b001000 0x1000>, /* GICH */ >> + <0x0b004000 0x1000>; /* GICV */ >> + #address-cells = <1>; >> + #size-cells = <1>; >> + interrupt-controller; >> + #interrupt-cells = <3>; >> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; >> + ranges = <0 0x0b00c000 0x3000>; >> + >> + v2m0: v2m@0 { >> + compatible = "arm,gic-v2m-frame"; >> + reg = <0x0 0xffd>; >> + msi-controller; >> + }; >> + >> + v2m1: v2m@1 { >> + compatible = "arm,gic-v2m-frame"; >> + reg = <0x00001000 0xffd>; > Unit address must match the address part of the reg property. > Okay >> + msi-controller; >> + }; >> + >> + v2m2: v2m@2 { > And here. > Okay > Konrad >> + compatible = "arm,gic-v2m-frame"; >> + reg = <0x00002000 0xffd>; >> + msi-controller; >> + }; >> + }; >> + >> + timer@b120000 { >> + compatible = "arm,armv7-timer-mem"; >> + reg = <0x0b120000 0x1000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + frame@b120000 { >> + reg = <0x0b121000 0x1000>, >> + <0x0b122000 0x1000>; >> + frame-number = <0>; >> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; >> + }; >> + >> + frame@b123000 { >> + reg = <0x0b123000 0x1000>; >> + frame-number = <1>; >> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; >> + status = "disabled"; >> + }; >> + >> + frame@b124000 { >> + reg = <0x0b124000 0x1000>; >> + frame-number = <2>; >> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; >> + status = "disabled"; >> + }; >> + >> + frame@b125000 { >> + reg = <0x0b125000 0x1000>; >> + frame-number = <3>; >> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; >> + status = "disabled"; >> + }; >> + >> + frame@b126000 { >> + reg = <0x0b126000 0x1000>; >> + frame-number = <4>; >> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; >> + status = "disabled"; >> + }; >> + >> + frame@b127000 { >> + reg = <0x0b127000 0x1000>; >> + frame-number = <5>; >> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; >> + status = "disabled"; >> + }; >> + >> + frame@b128000 { >> + reg = <0x0b128000 0x1000>; >> + frame-number = <6>; >> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; >> + status = "disabled"; >> + }; >> + }; >> + }; >> + >> + timer { >> + compatible = "arm,armv8-timer"; >> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; >> + }; >> +}; Best Regards, Devi Priya
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index b0423ca3e79f..ff40e86181d4 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file mode 100644 index 000000000000..4aa06e4f63c7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 AL02-C7 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + + rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi new file mode 100644 index 000000000000..1f34ebc8724f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 SoC device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { + compatible = "fixed-clock"; + clock-frequency = <353000000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_region: memory@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + gpio-reserved-ranges = <59 1>; + interrupt-controller; + #interrupt-cells = <2>; + + uart2_pins: uart2-state { + pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq9574-gcc"; + reg = <0x01800000 0x80000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&bias_pll_ubi_nc_clk>, + <0>, + <0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep_clk", + "bias_pll_ubi_nc_clk", + "pcie30_phy0_pipe_clk", + "pcie30_phy1_pipe_clk", + "pcie30_phy2_pipe_clk", + "pcie30_phy3_pipe_clk", + "usb3phy_0_cc_pipe_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + sdhc_1: mmc@7804000 { + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board_clk>; + clock-names = "iface", "core", "xo"; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x0 0xffd>; + msi-controller; + }; + + v2m1: v2m@1 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00001000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00002000 0xffd>; + msi-controller; + }; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b120000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +};