| Message ID | 20230201103534.108136-5-okan.sahin@analog.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | Add MAX77541/MAX77540 PMIC Support | expand |
On 01/02/2023 11:35, Okan Sahin wrote: > Add ADI MAX77541/MAX77540 devicetree document. > > Signed-off-by: Okan Sahin <okan.sahin@analog.com> > --- > .../devicetree/bindings/mfd/adi,max77541.yaml | 87 +++++++++++++++++++ > 1 file changed, 87 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/adi,max77541.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/adi,max77541.yaml b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml > new file mode 100644 > index 000000000000..91d15e9ca2e3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml > @@ -0,0 +1,87 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MAX77540/MAX77541 PMIC from ADI > + > +maintainers: > + - Okan Sahin <okan.sahin@analog.com> > + > +description: | > + MAX77540 is a Power Management IC with 2 buck regulators. > + > + MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC. > + > +properties: > + compatible: > + enum: > + - adi,max77540 > + - adi,max77541 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + regulators: > + $ref: /schemas/regulator/adi,max77541-regulator.yaml# > + > +required: > + - compatible > + - reg > + - interrupts > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: adi,max77540 > + then: > + properties: > + regulator: > + properties: > + compatible: > + const: adi,max77540-regulator > + else: > + properties: > + regulator: > + properties: > + compatible: > + const: adi,max77541-regulator You do not use these compatibles and they do not bring the benefit. Probably this should be all dropped. > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pmic@69 { > + compatible = "adi,max77541"; > + reg = <0x69>; > + interrupt-parent = <&gpio>; > + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; > + > + regulators { So no compatible? Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/mfd/adi,max77541.yaml b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml new file mode 100644 index 000000000000..91d15e9ca2e3 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77540/MAX77541 PMIC from ADI + +maintainers: + - Okan Sahin <okan.sahin@analog.com> + +description: | + MAX77540 is a Power Management IC with 2 buck regulators. + + MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC. + +properties: + compatible: + enum: + - adi,max77540 + - adi,max77541 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + $ref: /schemas/regulator/adi,max77541-regulator.yaml# + +required: + - compatible + - reg + - interrupts + +allOf: + - if: + properties: + compatible: + contains: + const: adi,max77540 + then: + properties: + regulator: + properties: + compatible: + const: adi,max77540-regulator + else: + properties: + regulator: + properties: + compatible: + const: adi,max77541-regulator + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "adi,max77541"; + reg = <0x69>; + interrupt-parent = <&gpio>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <5200000>; + regulator-boot-on; + regulator-always-on; + }; + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <5200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + };
Add ADI MAX77541/MAX77540 devicetree document. Signed-off-by: Okan Sahin <okan.sahin@analog.com> --- .../devicetree/bindings/mfd/adi,max77541.yaml | 87 +++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/adi,max77541.yaml