| Message ID | 20230202175440.5579e52e@jic23-huawei (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | [PULL] IIO: 1st set of new device support etc for 6.3 | expand |
On Thu, Feb 02, 2023 at 05:54:40PM +0000, Jonathan Cameron wrote: > The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2: > > Linux 6.2-rc1 (2022-12-25 13:41:39 -0800) > > are available in the Git repository at: > > https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.3a Pulled and pushed out, thanks. greg k-h
The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2: Linux 6.2-rc1 (2022-12-25 13:41:39 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.3a for you to fetch changes up to 4ae612e4af95d72e36f478cad66d47c06b86de68: iio: adc: ad7291: Fix indentation error by adding extra spaces (2023-01-28 18:08:47 +0000) ---------------------------------------------------------------- 1st set of IIO new device support, features and cleanups for the 6.3 cycle The usual mixed bag. So far this has been a quiet cycle for IIO. New device support * adi,ad8686 - Add support for the AD5337 DAC - ID and 8 bit channel support. * maxim,max5522 - New driver for this 2 channel DAC. * nxp,imx93-adc - New driver for this SoC ADC which is a fresh IP that will probably turn up in additional SoCs going forwards. * st,magn - Add support for magnetometer part of LSM303C which is very similar to standalone LIS3MDL already supported. * ti,ads7924 - New driver for this 4 channel, 12-bit I2C ADC. * ti,lmp92064 - New driver for this 12 bit SPI ADC. * ti,tmag5273 - New driver for this 3D Hall-Effect Sensor. Features * core - Add a standard structure for the value pairs in IIO_VAL_INT_PLUS_MICRO available attributes and similar. * cirrus,ep93xx - Add DT binding docs and convert driver to DT based probing. - Enable testing building with CONFIG_COMPILE_TEST. * st,stm32-dfsdm - Enable ID register support for discovery of hardware capabilities on some devices. Cleanups and minor fixes * core - Drop the custom iio_sysfs_match_string_with_gaps(). The special ability of this function to skip gaps in an array was never used by any upstream driver. - Sort headers whilst touching this file. * tools - Fix memory leak in iio_utils.c * various - leftover i2c probe_new() conversions. - scnprintf() -> sysfs_emit() cleanups. - hand rolled devm enables -> devm_regulator[_bulk]_get_enable() - typo fixes - dt-binding cleanup (whitespace, excess quotes and similar) * adi,ad7746 - Set variable without pointless conditional. * fsl,mma9551 - Squash false positives about use of uninitialized variable where garbage undergoes an endian conversion before being ignored. * measspec,ms5611 - Switch to fully devm_ managed probe() and so drop explicit remove() * qcom,spmi-adc - Use dev_err_probe() to suppress deferred print. * qcom,spmi-adc5 - Define a missing channel used for battery identification. * qcom,spmi-iadc - Document a compatible seen in wild. * semtech,sx9360 - Fix units on semtech,resolution dt-binding. * sensiron,scd30 - dev_err_probe() usage to simplify error paths a little. * st,lsm6dsx - Add missing mount matrix for the gyro IIO device. * taos,tsl2563 - Respect firmware configured interrupt polarity if present. - Use i2c_smbus_write_word_data() in a few cases not previously covered. - Factor out duplicated interrupt configuration. - Switch to GENMASK() / BIT() from hand coded equivalents. - Tidy up unused definitions. - Use dev_err_probe() as appropriate. - Drop platform_data as no in kernel users and there are better ways to do equivalent if any are added. - Add local struct device variable to tidy up code. - Avoid dance via i2c_client to get the drvdata. - Tidy up headers ordering and Makefile ordering. * ti,adc128s052 - Use new spi_get_device_match_data(). - Drop ACPI_PTR() protection. - Sort headers whilst here. - Use asm instead of incorrect include of asm-generic/unaligned.h * vishay,vcn4000 - Interrupt support for vcnl4040 (lots of refactoring needed) * xilinx,ams - Use fwnode_device_is_compatible() instead of open coding it. ---------------------------------------------------------------- Alexander Sverdlin (2): dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description iio: adc: ep93xx: Add OF support Alexander Vorwerk (1): drivers: iio: cdc: Drop redundant if check Andy Shevchenko (19): iio: light: tsl2563: Use i2c_smbus_write_word_data() in tsl2563_configure() iio: light: tsl2563: Configure INT in one place iio: light: tsl2563: Make use of the macros from bits.h iio: light: tsl2563: Drop unused defintion(s) iio: light: tsl2563: Simplify with dev_err_probe iio: light: tsl2563: Drop legacy platform data code iio: light: tsl2563: Utilise temporary variable for struct device iio: light: tsl2563: Use dev_get_drvdata() directly in PM callbacks iio: light: tsl2563: sort header inclusion alphabetically iio: light: tsl2563: Keep Makefile sorted by module name iio: adc: ti-adc128s052: Switch to use spi_get_device_match_data() iio: adc: ti-adc128s052: Drop anti-pattern of ACPI_PTR() use iio: adc: ti-adc128s052: Sort headers iio: adc: max11410: Use asm intead of asm-generic iio: chemical: scd30_core: use sysfs_emit() to instead of scnprintf() iio: chemical: scd30_core: Switch to use dev_err_probe() iio: adc: xilinx-ams: Convert to use fwnode_device_is_compatible() iio: core: Replace iio_sysfs_match_string_with_gaps() by __sysfs_match_string() iio: core: Sort headers Angelo Dureghello (1): iio: dac: add support for max5522 Anup Sharma (1): iio: adc: ad7291: Fix indentation error by adding extra spaces Colin Ian King (2): iio: imu: kmx61: Fix spelling mistake "Errow" -> "Error" iio: adc: imx93: Fix spelling mistake "geting" -> "getting" Fabio Estevam (3): dt-bindings: iio: dac: ad5686: Add an entry for AD5337 iio: dac: ad5686: Add support for AD5337 dt-bindings: iio: adc: max1238: Fix a typo in the description Ferry Toth (1): iio: light: tsl2563: Do not hardcode interrupt trigger type Gerald Loacker (3): iio: add struct declaration for iio types dt-bindings: iio: magnetometer: add ti tmag5273 documentation file iio: magnetometer: add ti tmag5273 driver Haibo Chen (2): iio: adc: add imx93 adc support dt-bindings: iio: adc: Add NXP IMX93 ADC Harshit Mogalapalli (2): iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word() iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word() Hugo Villeneuve (2): iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver dt-bindings: iio: adc: add Texas Instruments ADS7924 Jonathan Cameron (5): iio: accel: bma400: Use devm_regulator_bulk_get_enable() iio: pressure: ms5611: Use devm_regulator_get_enable() iio: pressure: ms5611: Switch to fully devm_ managed registration. iio: adc: ep93xx: Enable wider build testing with COMPILE_TEST dt-bindings: iio: dac: Maxim max5522 DAC Krzysztof Kozlowski (6): dt-bindings: iio: adc: maxim,max1363: fix interface typo dt-bindings: iio: drop unneeded quotes dt-bindings: iio: minor whitespace cleanups dt-bindings: iio: correct node names in examples dt-bindings: iio: use lowercase hex in examples dt-bindings: iio: cleanup examples - indentation Leonard Göhrs (2): dt-bindings: iio: adc: add TI LMP92064 controller iio: adc: add ADC driver for the TI LMP92064 controller Luca Weiss (1): iio: adc: qcom-spmi-adc5: define ADC5_BAT_ID_100K_PU channel Marijn Suijten (1): iio: adc: qcom-spmi-adc5: Suppress probe-deferral error message Mårten Lindahl (3): iio: light: vcnl4000: Prepare for more generic setup iio: light: vcnl4000: Make irq handling more generic iio: light: vcnl4000: Add interrupt support for vcnl4040 Olivier Moysan (1): iio: adc: stm32-dfsdm: add id registers support Philippe De Muyter (2): iio: imu: st_lsm6dsx: fix naming of 'struct iio_info' in st_lsm6dsx_shub.c. iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel. Rayyan Ansari (1): dt-bindings: iio/adc: qcom,spmi-iadc: document PM8226 compatible Rob Herring (1): dt-bindings: iio/proximity: semtech,sx9360: Fix 'semtech,resolution' type Samuel Holland (1): dt-bindings: iio: adc: ti,adc081c: Document the binding Stephan Gerhold (3): dt-bindings: iio: st-sensors: Add LSM303C accelerometer+magnetometer iio: accel: st_accel: Add LSM303C iio: magnetometer: st_magn: Add LSM303C Tom Rix (1): iio: imu: fix spdx format Uwe Kleine-König (1): iio: light: max44009: Convert to i2c's .probe_new() Yulong Zhang (1): tools/iio/iio_utils:fix memory leak ye xingchen (2): iio: adc: at91-sama5d2_adc: use sysfs_emit() to instead of scnprintf() iio: common: scmi_iio: use sysfs_emit() to instead of scnprintf() .../bindings/iio/accel/adi,adis16201.yaml | 2 +- .../bindings/iio/accel/adi,adis16240.yaml | 2 +- .../devicetree/bindings/iio/accel/adi,adxl313.yaml | 2 +- .../devicetree/bindings/iio/accel/adi,adxl345.yaml | 4 +- .../devicetree/bindings/iio/accel/adi,adxl355.yaml | 52 +- .../devicetree/bindings/iio/accel/adi,adxl372.yaml | 48 +- .../bindings/iio/accel/bosch,bma220.yaml | 2 +- .../bindings/iio/accel/kionix,kxcjk1013.yaml | 2 +- .../bindings/iio/accel/memsensing,msa311.yaml | 5 +- .../bindings/iio/accel/nxp,fxls8962af.yaml | 4 +- .../devicetree/bindings/iio/adc/adi,ad7091r5.yaml | 8 +- .../devicetree/bindings/iio/adc/adi,ad7124.yaml | 2 +- .../devicetree/bindings/iio/adc/adi,ad7192.yaml | 42 +- .../devicetree/bindings/iio/adc/adi,ad7292.yaml | 2 +- .../devicetree/bindings/iio/adc/adi,ad7606.yaml | 40 +- .../devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 +- .../devicetree/bindings/iio/adc/adi,ad799x.yaml | 18 +- .../devicetree/bindings/iio/adc/adi,ad9467.yaml | 8 +- .../devicetree/bindings/iio/adc/adi,axi-adc.yaml | 10 +- .../bindings/iio/adc/atmel,sama5d2-adc.yaml | 2 +- .../devicetree/bindings/iio/adc/avia-hx711.yaml | 4 +- .../bindings/iio/adc/cirrus,ep9301-adc.yaml | 47 ++ .../devicetree/bindings/iio/adc/ingenic,adc.yaml | 18 +- .../devicetree/bindings/iio/adc/maxim,max1027.yaml | 4 +- .../devicetree/bindings/iio/adc/maxim,max1238.yaml | 2 +- .../devicetree/bindings/iio/adc/maxim,max1241.yaml | 4 +- .../devicetree/bindings/iio/adc/maxim,max1363.yaml | 2 +- .../bindings/iio/adc/microchip,mcp3911.yaml | 4 +- .../devicetree/bindings/iio/adc/nxp,imx93-adc.yaml | 81 +++ .../bindings/iio/adc/qcom,pm8018-adc.yaml | 2 +- .../bindings/iio/adc/qcom,spmi-iadc.yaml | 3 +- .../bindings/iio/adc/qcom,spmi-rradc.yaml | 16 +- .../bindings/iio/adc/renesas,rzg2l-adc.yaml | 2 +- .../bindings/iio/adc/samsung,exynos-adc.yaml | 6 +- .../devicetree/bindings/iio/adc/st,stm32-adc.yaml | 8 +- .../devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 8 +- .../devicetree/bindings/iio/adc/ti,adc081c.yaml | 55 ++ .../devicetree/bindings/iio/adc/ti,ads1015.yaml | 8 +- .../devicetree/bindings/iio/adc/ti,ads131e08.yaml | 2 +- .../devicetree/bindings/iio/adc/ti,ads7924.yaml | 110 +++ .../devicetree/bindings/iio/adc/ti,lmp92064.yaml | 70 ++ .../devicetree/bindings/iio/adc/ti,tsc2046.yaml | 34 +- .../devicetree/bindings/iio/dac/adi,ad3552r.yaml | 40 +- .../devicetree/bindings/iio/dac/adi,ad5380.yaml | 1 + .../devicetree/bindings/iio/dac/adi,ad5686.yaml | 1 + .../devicetree/bindings/iio/dac/adi,ad5766.yaml | 22 +- .../devicetree/bindings/iio/dac/adi,ad5770r.yaml | 88 +-- .../devicetree/bindings/iio/dac/adi,ltc2688.yaml | 52 +- .../devicetree/bindings/iio/dac/lltc,ltc1660.yaml | 4 +- .../devicetree/bindings/iio/dac/lltc,ltc2632.yaml | 20 +- .../devicetree/bindings/iio/dac/maxim,max5522.yaml | 49 ++ .../devicetree/bindings/iio/dac/st,stm32-dac.yaml | 4 +- .../devicetree/bindings/iio/dac/ti,dac5571.yaml | 2 +- .../devicetree/bindings/iio/frequency/adf4371.yaml | 12 +- .../bindings/iio/gyroscope/adi,adxrs290.yaml | 14 +- .../bindings/iio/gyroscope/nxp,fxas21002c.yaml | 30 +- .../devicetree/bindings/iio/health/ti,afe4403.yaml | 2 +- .../devicetree/bindings/iio/health/ti,afe4404.yaml | 2 +- .../devicetree/bindings/iio/humidity/dht11.yaml | 2 +- .../bindings/iio/humidity/ti,hdc2010.yaml | 16 +- .../devicetree/bindings/iio/imu/adi,adis16460.yaml | 2 +- .../devicetree/bindings/iio/imu/adi,adis16475.yaml | 24 +- .../devicetree/bindings/iio/imu/bosch,bmi160.yaml | 32 +- .../bindings/iio/imu/invensense,icm42600.yaml | 34 +- .../devicetree/bindings/iio/imu/nxp,fxos8700.yaml | 26 +- .../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 2 +- .../bindings/iio/magnetometer/ti,tmag5273.yaml | 75 +++ .../bindings/iio/magnetometer/yamaha,yas530.yaml | 18 +- .../bindings/iio/potentiometer/adi,ad5272.yaml | 2 +- .../bindings/iio/pressure/asc,dlhl60d.yaml | 2 +- .../devicetree/bindings/iio/pressure/bmp085.yaml | 24 +- .../bindings/iio/proximity/ams,as3935.yaml | 2 +- .../proximity/google,cros-ec-mkbp-proximity.yaml | 1 - .../bindings/iio/proximity/semtech,sx9360.yaml | 2 +- .../devicetree/bindings/iio/st,st-sensors.yaml | 2 + .../bindings/iio/temperature/adi,ltc2983.yaml | 137 ++-- .../bindings/iio/temperature/maxim,max31865.yaml | 12 +- .../bindings/iio/temperature/ti,tmp117.yaml | 6 +- MAINTAINERS | 28 +- drivers/iio/accel/Kconfig | 2 +- drivers/iio/accel/bma400.h | 4 - drivers/iio/accel/bma400_core.c | 29 +- drivers/iio/accel/mma9551_core.c | 10 +- drivers/iio/accel/st_accel.h | 1 + drivers/iio/accel/st_accel_core.c | 1 + drivers/iio/accel/st_accel_i2c.c | 5 + drivers/iio/accel/st_accel_spi.c | 5 + drivers/iio/adc/Kconfig | 34 +- drivers/iio/adc/Makefile | 3 + drivers/iio/adc/ad7291.c | 2 +- drivers/iio/adc/at91-sama5d2_adc.c | 4 +- drivers/iio/adc/ep93xx_adc.c | 8 + drivers/iio/adc/imx93_adc.c | 484 ++++++++++++++ drivers/iio/adc/max11410.c | 3 +- drivers/iio/adc/qcom-spmi-adc5.c | 8 +- drivers/iio/adc/stm32-dfsdm-core.c | 99 ++- drivers/iio/adc/stm32-dfsdm.h | 60 +- drivers/iio/adc/ti-adc128s052.c | 54 +- drivers/iio/adc/ti-ads7924.c | 474 +++++++++++++ drivers/iio/adc/ti-lmp92064.c | 332 +++++++++ drivers/iio/adc/xilinx-ams.c | 9 +- drivers/iio/cdc/ad7746.c | 3 +- drivers/iio/chemical/scd30_core.c | 46 +- drivers/iio/common/scmi_sensors/scmi_iio.c | 4 +- drivers/iio/dac/Kconfig | 21 +- drivers/iio/dac/Makefile | 1 + drivers/iio/dac/ad5686.c | 7 + drivers/iio/dac/ad5686.h | 1 + drivers/iio/dac/ad5696-i2c.c | 2 + drivers/iio/dac/max5522.c | 207 ++++++ drivers/iio/imu/bno055/bno055_ser_trace.c | 2 +- drivers/iio/imu/kmx61.c | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 5 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 12 +- drivers/iio/industrialio-core.c | 64 +- drivers/iio/light/Makefile | 2 +- drivers/iio/light/max44009.c | 5 +- drivers/iio/light/tsl2563.c | 189 +++--- drivers/iio/light/vcnl4000.c | 449 +++++++++---- drivers/iio/magnetometer/Kconfig | 14 +- drivers/iio/magnetometer/Makefile | 2 + drivers/iio/magnetometer/st_magn.h | 1 + drivers/iio/magnetometer/st_magn_core.c | 1 + drivers/iio/magnetometer/st_magn_i2c.c | 5 + drivers/iio/magnetometer/st_magn_spi.c | 5 + drivers/iio/magnetometer/tmag5273.c | 743 +++++++++++++++++++++ drivers/iio/pressure/ms5611.h | 4 - drivers/iio/pressure/ms5611_core.c | 49 +- drivers/iio/pressure/ms5611_i2c.c | 6 - drivers/iio/pressure/ms5611_spi.c | 6 - include/linux/iio/iio.h | 5 + include/linux/platform_data/tsl2563.h | 9 - tools/iio/iio_utils.c | 23 +- 133 files changed, 4018 insertions(+), 1047 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/adc/cirrus,ep9301-adc.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,adc081c.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml create mode 100644 Documentation/devicetree/bindings/iio/dac/maxim,max5522.yaml create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml create mode 100644 drivers/iio/adc/imx93_adc.c create mode 100644 drivers/iio/adc/ti-ads7924.c create mode 100644 drivers/iio/adc/ti-lmp92064.c create mode 100644 drivers/iio/dac/max5522.c create mode 100644 drivers/iio/magnetometer/tmag5273.c delete mode 100644 include/linux/platform_data/tsl2563.h