| Message ID | 20230131192016.3476937-7-dave.stevenson@raspberrypi.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | imx290: Minor fixes, support for alternate INCK, and more ctrls | expand |
Hi Dave, Thank you for the patch. On Tue, Jan 31, 2023 at 07:20:11PM +0000, Dave Stevenson wrote: > Commit "98e0500eadb7 media: i2c: imx290: Add configurable link frequency > and pixel rate" added support for the increased link frequencies > on 2 data lanes, but didn't update the CSI timing registers in > accordance with the datasheet. > > Use the specified settings. > > Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> > --- > drivers/media/i2c/imx290.c | 126 +++++++++++++++++++++++++++++++------ > 1 file changed, 106 insertions(+), 20 deletions(-) > > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c > index 6bcfa535872f..9ddd6382b127 100644 > --- a/drivers/media/i2c/imx290.c > +++ b/drivers/media/i2c/imx290.c > @@ -174,6 +174,18 @@ struct imx290_mode { > u32 data_size; > }; > > +struct imx290_csi_cfg { > + u16 repitition; s/repitition/repetition/ I wonder what this it. > + u16 tclkpost; > + u16 thszero; > + u16 thsprepare; > + u16 tclktrail; > + u16 thstrail; > + u16 tclkzero; > + u16 tclkprepare; > + u16 tlpx; > +}; > + > struct imx290 { > struct device *dev; > struct clk *xclk; > @@ -273,16 +285,6 @@ static const struct imx290_regval imx290_1080p_settings[] = { > { IMX290_INCKSEL4, 0x01 }, > { IMX290_INCKSEL5, 0x1a }, > { IMX290_INCKSEL6, 0x1a }, > - /* data rate settings */ > - { IMX290_REPETITION, 0x10 }, > - { IMX290_TCLKPOST, 87 }, > - { IMX290_THSZERO, 55 }, > - { IMX290_THSPREPARE, 31 }, > - { IMX290_TCLKTRAIL, 31 }, > - { IMX290_THSTRAIL, 31 }, > - { IMX290_TCLKZERO, 119 }, > - { IMX290_TCLKPREPARE, 31 }, > - { IMX290_TLPX, 23 }, > }; > > static const struct imx290_regval imx290_720p_settings[] = { > @@ -298,16 +300,6 @@ static const struct imx290_regval imx290_720p_settings[] = { > { IMX290_INCKSEL4, 0x01 }, > { IMX290_INCKSEL5, 0x1a }, > { IMX290_INCKSEL6, 0x1a }, > - /* data rate settings */ > - { IMX290_REPETITION, 0x10 }, > - { IMX290_TCLKPOST, 79 }, > - { IMX290_THSZERO, 47 }, > - { IMX290_THSPREPARE, 23 }, > - { IMX290_TCLKTRAIL, 23 }, > - { IMX290_THSTRAIL, 23 }, > - { IMX290_TCLKZERO, 87 }, > - { IMX290_TCLKPREPARE, 23 }, > - { IMX290_TLPX, 23 }, > }; > > static const struct imx290_regval imx290_10bit_settings[] = { > @@ -328,6 +320,58 @@ static const struct imx290_regval imx290_12bit_settings[] = { > { IMX290_CSI_DT_FMT, IMX290_CSI_DT_FMT_RAW12 }, > }; > > +static const struct imx290_csi_cfg imx290_csi_222_75mhz = { > + /* 222.25MHz or 445.5Mbit/s per lane */ > + .repitition = 0x10, > + .tclkpost = 87, > + .thszero = 55, > + .thsprepare = 31, > + .tclktrail = 31, > + .thstrail = 31, > + .tclkzero = 119, > + .tclkprepare = 31, > + .tlpx = 23, > +}; > + > +static const struct imx290_csi_cfg imx290_csi_445_5mhz = { > + /* 445.5MHz or 891Mbit/s per lane */ > + .repitition = 0x00, > + .tclkpost = 119, > + .thszero = 103, > + .thsprepare = 71, > + .tclktrail = 55, > + .thstrail = 63, > + .tclkzero = 255, > + .tclkprepare = 63, > + .tlpx = 55, > +}; > + > +static const struct imx290_csi_cfg imx290_csi_148_5mhz = { > + /* 148.5MHz or 297Mbit/s per lane */ > + .repitition = 0x10, > + .tclkpost = 79, > + .thszero = 47, > + .thsprepare = 23, > + .tclktrail = 23, > + .thstrail = 23, > + .tclkzero = 87, > + .tclkprepare = 23, > + .tlpx = 23, > +}; > + > +static const struct imx290_csi_cfg imx290_csi_297mhz = { > + /* 297MHz or 594Mbit/s per lane */ > + .repitition = 0x00, > + .tclkpost = 103, > + .thszero = 87, > + .thsprepare = 47, > + .tclktrail = 39, > + .thstrail = 47, > + .tclkzero = 191, > + .tclkprepare = 47, > + .tlpx = 39, > +}; > + > /* supported link frequencies */ > #define FREQ_INDEX_1080P 0 > #define FREQ_INDEX_720P 1 > @@ -536,6 +580,42 @@ static int imx290_set_black_level(struct imx290 *imx290, > black_level >> (16 - bpp), err); > } > > +static int imx290_set_csi_config(struct imx290 *imx290) > +{ > + const s64 *link_freqs = imx290_link_freqs_ptr(imx290); > + const struct imx290_csi_cfg *csi_cfg; > + int ret = 0; > + > + switch (link_freqs[imx290->current_mode->link_freq_index]) { > + case 445500000: > + csi_cfg = &imx290_csi_445_5mhz; > + break; > + case 297000000: > + csi_cfg = &imx290_csi_297mhz; > + break; > + case 222750000: > + csi_cfg = &imx290_csi_222_75mhz; > + break; > + case 148500000: > + csi_cfg = &imx290_csi_148_5mhz; > + break; There's probably a way to rework the link_freqs arrays and FREQ_INDEX_* macros to simplify the constructs and avoid a switch based on the frequency value, but that can also be done later. > + default: > + return -EINVAL; > + } > + > + imx290_write(imx290, IMX290_REPETITION, csi_cfg->repitition, &ret); > + imx290_write(imx290, IMX290_TCLKPOST, csi_cfg->tclkpost, &ret); > + imx290_write(imx290, IMX290_THSZERO, csi_cfg->thszero, &ret); > + imx290_write(imx290, IMX290_THSPREPARE, csi_cfg->thsprepare, &ret); > + imx290_write(imx290, IMX290_TCLKTRAIL, csi_cfg->tclktrail, &ret); > + imx290_write(imx290, IMX290_THSTRAIL, csi_cfg->thstrail, &ret); > + imx290_write(imx290, IMX290_TCLKZERO, csi_cfg->tclkzero, &ret); > + imx290_write(imx290, IMX290_TCLKPREPARE, csi_cfg->tclkprepare, &ret); > + imx290_write(imx290, IMX290_TLPX, csi_cfg->tlpx, &ret); > + > + return ret; > +} > + > static int imx290_setup_format(struct imx290 *imx290, > const struct v4l2_mbus_framefmt *format) > { > @@ -748,6 +828,12 @@ static int imx290_start_streaming(struct imx290 *imx290, > return ret; > } > > + ret = imx290_set_csi_config(imx290); > + if (ret < 0) { > + dev_err(imx290->dev, "Could not set csi cfg\n"); Maybe adding the error code to the message ? Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > + return ret; > + } > + > /* Apply the register values related to current frame format */ > format = v4l2_subdev_get_pad_format(&imx290->sd, state, 0); > ret = imx290_setup_format(imx290, format);
Hi Dave, thanks for the patch. Am Dienstag, 31. Januar 2023, 20:20:11 CET schrieb Dave Stevenson: > Commit "98e0500eadb7 media: i2c: imx290: Add configurable link frequency > and pixel rate" added support for the increased link frequencies > on 2 data lanes, but didn't update the CSI timing registers in > accordance with the datasheet. > > Use the specified settings. > > Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> > --- > drivers/media/i2c/imx290.c | 126 +++++++++++++++++++++++++++++++------ > 1 file changed, 106 insertions(+), 20 deletions(-) > > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c > index 6bcfa535872f..9ddd6382b127 100644 > --- a/drivers/media/i2c/imx290.c > +++ b/drivers/media/i2c/imx290.c > @@ -174,6 +174,18 @@ struct imx290_mode { > u32 data_size; > }; > > +struct imx290_csi_cfg { > + u16 repitition; > + u16 tclkpost; > + u16 thszero; > + u16 thsprepare; > + u16 tclktrail; > + u16 thstrail; > + u16 tclkzero; > + u16 tclkprepare; > + u16 tlpx; > +}; > + > struct imx290 { > struct device *dev; > struct clk *xclk; > @@ -273,16 +285,6 @@ static const struct imx290_regval > imx290_1080p_settings[] = { { IMX290_INCKSEL4, 0x01 }, > { IMX290_INCKSEL5, 0x1a }, > { IMX290_INCKSEL6, 0x1a }, > - /* data rate settings */ > - { IMX290_REPETITION, 0x10 }, > - { IMX290_TCLKPOST, 87 }, > - { IMX290_THSZERO, 55 }, > - { IMX290_THSPREPARE, 31 }, > - { IMX290_TCLKTRAIL, 31 }, > - { IMX290_THSTRAIL, 31 }, > - { IMX290_TCLKZERO, 119 }, > - { IMX290_TCLKPREPARE, 31 }, > - { IMX290_TLPX, 23 }, > }; > > static const struct imx290_regval imx290_720p_settings[] = { > @@ -298,16 +300,6 @@ static const struct imx290_regval > imx290_720p_settings[] = { { IMX290_INCKSEL4, 0x01 }, > { IMX290_INCKSEL5, 0x1a }, > { IMX290_INCKSEL6, 0x1a }, > - /* data rate settings */ > - { IMX290_REPETITION, 0x10 }, > - { IMX290_TCLKPOST, 79 }, > - { IMX290_THSZERO, 47 }, > - { IMX290_THSPREPARE, 23 }, > - { IMX290_TCLKTRAIL, 23 }, > - { IMX290_THSTRAIL, 23 }, > - { IMX290_TCLKZERO, 87 }, > - { IMX290_TCLKPREPARE, 23 }, > - { IMX290_TLPX, 23 }, > }; > > static const struct imx290_regval imx290_10bit_settings[] = { > @@ -328,6 +320,58 @@ static const struct imx290_regval > imx290_12bit_settings[] = { { IMX290_CSI_DT_FMT, IMX290_CSI_DT_FMT_RAW12 }, > }; > > +static const struct imx290_csi_cfg imx290_csi_222_75mhz = { > + /* 222.25MHz or 445.5Mbit/s per lane */ 222.75MHz. This is also 891 MBit/s per lane, no? This link frequency is used for 4 lane setup only. > + .repitition = 0x10, > + .tclkpost = 87, > + .thszero = 55, > + .thsprepare = 31, > + .tclktrail = 31, > + .thstrail = 31, > + .tclkzero = 119, > + .tclkprepare = 31, > + .tlpx = 23, > +}; > + > +static const struct imx290_csi_cfg imx290_csi_445_5mhz = { > + /* 445.5MHz or 891Mbit/s per lane */ > + .repitition = 0x00, > + .tclkpost = 119, > + .thszero = 103, > + .thsprepare = 71, > + .tclktrail = 55, > + .thstrail = 63, > + .tclkzero = 255, > + .tclkprepare = 63, > + .tlpx = 55, > +}; > + > +static const struct imx290_csi_cfg imx290_csi_148_5mhz = { > + /* 148.5MHz or 297Mbit/s per lane */ 594 MBit/s per lane, no? This link freq is only used for 4 lanes > + .repitition = 0x10, Ah, this is so confusing. This structure is used depending on the link_freq, but this value is defined on the data rate (for both 2 & 4 lanes separately). Best regards, Alexander > + .tclkpost = 79, > + .thszero = 47, > + .thsprepare = 23, > + .tclktrail = 23, > + .thstrail = 23, > + .tclkzero = 87, > + .tclkprepare = 23, > + .tlpx = 23, > +}; > + > +static const struct imx290_csi_cfg imx290_csi_297mhz = { > + /* 297MHz or 594Mbit/s per lane */ > + .repitition = 0x00, > + .tclkpost = 103, > + .thszero = 87, > + .thsprepare = 47, > + .tclktrail = 39, > + .thstrail = 47, > + .tclkzero = 191, > + .tclkprepare = 47, > + .tlpx = 39, > +}; > + > /* supported link frequencies */ > #define FREQ_INDEX_1080P 0 > #define FREQ_INDEX_720P 1 > @@ -536,6 +580,42 @@ static int imx290_set_black_level(struct imx290 > *imx290, black_level >> (16 - bpp), err); > } > > +static int imx290_set_csi_config(struct imx290 *imx290) > +{ > + const s64 *link_freqs = imx290_link_freqs_ptr(imx290); > + const struct imx290_csi_cfg *csi_cfg; > + int ret = 0; > + > + switch (link_freqs[imx290->current_mode->link_freq_index]) { > + case 445500000: > + csi_cfg = &imx290_csi_445_5mhz; > + break; > + case 297000000: > + csi_cfg = &imx290_csi_297mhz; > + break; > + case 222750000: > + csi_cfg = &imx290_csi_222_75mhz; > + break; > + case 148500000: > + csi_cfg = &imx290_csi_148_5mhz; > + break; > + default: > + return -EINVAL; > + } > + > + imx290_write(imx290, IMX290_REPETITION, csi_cfg->repitition, &ret); > + imx290_write(imx290, IMX290_TCLKPOST, csi_cfg->tclkpost, &ret); > + imx290_write(imx290, IMX290_THSZERO, csi_cfg->thszero, &ret); > + imx290_write(imx290, IMX290_THSPREPARE, csi_cfg->thsprepare, &ret); > + imx290_write(imx290, IMX290_TCLKTRAIL, csi_cfg->tclktrail, &ret); > + imx290_write(imx290, IMX290_THSTRAIL, csi_cfg->thstrail, &ret); > + imx290_write(imx290, IMX290_TCLKZERO, csi_cfg->tclkzero, &ret); > + imx290_write(imx290, IMX290_TCLKPREPARE, csi_cfg->tclkprepare, &ret); > + imx290_write(imx290, IMX290_TLPX, csi_cfg->tlpx, &ret); > + > + return ret; > +} > + > static int imx290_setup_format(struct imx290 *imx290, > const struct v4l2_mbus_framefmt *format) > { > @@ -748,6 +828,12 @@ static int imx290_start_streaming(struct imx290 > *imx290, return ret; > } > > + ret = imx290_set_csi_config(imx290); > + if (ret < 0) { > + dev_err(imx290->dev, "Could not set csi cfg\n"); > + return ret; > + } > + > /* Apply the register values related to current frame format */ > format = v4l2_subdev_get_pad_format(&imx290->sd, state, 0); > ret = imx290_setup_format(imx290, format);
Hi Alexander On Fri, 3 Feb 2023 at 08:04, Alexander Stein <alexander.stein@ew.tq-group.com> wrote: > > Hi Dave, > > thanks for the patch. > > Am Dienstag, 31. Januar 2023, 20:20:11 CET schrieb Dave Stevenson: > > Commit "98e0500eadb7 media: i2c: imx290: Add configurable link frequency > > and pixel rate" added support for the increased link frequencies > > on 2 data lanes, but didn't update the CSI timing registers in > > accordance with the datasheet. > > > > Use the specified settings. > > > > Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> > > --- > > drivers/media/i2c/imx290.c | 126 +++++++++++++++++++++++++++++++------ > > 1 file changed, 106 insertions(+), 20 deletions(-) > > > > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c > > index 6bcfa535872f..9ddd6382b127 100644 > > --- a/drivers/media/i2c/imx290.c > > +++ b/drivers/media/i2c/imx290.c > > @@ -174,6 +174,18 @@ struct imx290_mode { > > u32 data_size; > > }; > > > > +struct imx290_csi_cfg { > > + u16 repitition; > > + u16 tclkpost; > > + u16 thszero; > > + u16 thsprepare; > > + u16 tclktrail; > > + u16 thstrail; > > + u16 tclkzero; > > + u16 tclkprepare; > > + u16 tlpx; > > +}; > > + > > struct imx290 { > > struct device *dev; > > struct clk *xclk; > > @@ -273,16 +285,6 @@ static const struct imx290_regval > > imx290_1080p_settings[] = { { IMX290_INCKSEL4, 0x01 }, > > { IMX290_INCKSEL5, 0x1a }, > > { IMX290_INCKSEL6, 0x1a }, > > - /* data rate settings */ > > - { IMX290_REPETITION, 0x10 }, > > - { IMX290_TCLKPOST, 87 }, > > - { IMX290_THSZERO, 55 }, > > - { IMX290_THSPREPARE, 31 }, > > - { IMX290_TCLKTRAIL, 31 }, > > - { IMX290_THSTRAIL, 31 }, > > - { IMX290_TCLKZERO, 119 }, > > - { IMX290_TCLKPREPARE, 31 }, > > - { IMX290_TLPX, 23 }, > > }; > > > > static const struct imx290_regval imx290_720p_settings[] = { > > @@ -298,16 +300,6 @@ static const struct imx290_regval > > imx290_720p_settings[] = { { IMX290_INCKSEL4, 0x01 }, > > { IMX290_INCKSEL5, 0x1a }, > > { IMX290_INCKSEL6, 0x1a }, > > - /* data rate settings */ > > - { IMX290_REPETITION, 0x10 }, > > - { IMX290_TCLKPOST, 79 }, > > - { IMX290_THSZERO, 47 }, > > - { IMX290_THSPREPARE, 23 }, > > - { IMX290_TCLKTRAIL, 23 }, > > - { IMX290_THSTRAIL, 23 }, > > - { IMX290_TCLKZERO, 87 }, > > - { IMX290_TCLKPREPARE, 23 }, > > - { IMX290_TLPX, 23 }, > > }; > > > > static const struct imx290_regval imx290_10bit_settings[] = { > > @@ -328,6 +320,58 @@ static const struct imx290_regval > > imx290_12bit_settings[] = { { IMX290_CSI_DT_FMT, IMX290_CSI_DT_FMT_RAW12 }, > > }; > > > > +static const struct imx290_csi_cfg imx290_csi_222_75mhz = { > > + /* 222.25MHz or 445.5Mbit/s per lane */ > > 222.75MHz. Ack s/222.25/222.75. Silly typo. > This is also 891 MBit/s per lane, no? This link frequency is used > for 4 lane setup only. CSI2 is Double Data Rate (DDR), so 2 bits per clock cycle. If the clock is 222.75MHz, that makes 445.5Mbit/s/lane. We only use 222.75MHz (1080p) and 148.5MHz (720p) link frequencies on 4 lanes, and 445.5MHz (1080p) and 297MHz (720p) on 2 lanes. That allows a max of 60fps in either configuration. Whilst the datasheet says you can drop the link frequencies if you're running at 30fps, there is no need to, so the driver doesn't. Looking at it I don't believe there is an actual requirement to drop the link frequency for 720p either. What's the difference in pixel readout between their 720p mode and a windowed mode that configures the same offset and size? There should be none, but from the datasheet they would use different link frequencies / data rates. > > + .repitition = 0x10, > > + .tclkpost = 87, > > + .thszero = 55, > > + .thsprepare = 31, > > + .tclktrail = 31, > > + .thstrail = 31, > > + .tclkzero = 119, > > + .tclkprepare = 31, > > + .tlpx = 23, > > +}; > > + > > +static const struct imx290_csi_cfg imx290_csi_445_5mhz = { > > + /* 445.5MHz or 891Mbit/s per lane */ > > + .repitition = 0x00, > > + .tclkpost = 119, > > + .thszero = 103, > > + .thsprepare = 71, > > + .tclktrail = 55, > > + .thstrail = 63, > > + .tclkzero = 255, > > + .tclkprepare = 63, > > + .tlpx = 55, > > +}; > > + > > +static const struct imx290_csi_cfg imx290_csi_148_5mhz = { > > + /* 148.5MHz or 297Mbit/s per lane */ > > 594 MBit/s per lane, no? This link freq is only used for 4 lanes As above. > > + .repitition = 0x10, > > Ah, this is so confusing. This structure is used depending on the link_freq, > but this value is defined on the data rate (for both 2 & 4 lanes separately). link_freq = data rate / 2 (Note that this is the data rate on the CSI-2 bus, not pixel rate) Data rate in the datasheet mode tables is quoted as units of Mbps/lane Looking at the table for all-pixel mode: 2 lane 30/25fps, data rate 445.5Mbps/lane, repetition 1 2 lane 60/50fps, data rate 891Mbps/lane, repetition 0 4 lane 30/25fps, data rate 222.75Mbps/lane, repetition 2 4 lane 60/50fps, data rate 445.5Mbps/lane, repetition 1 4 lane 120/100fps, data rate 891Mbps/lane, repetition 0 Repetition and all the other CSI2 timing parameters are based solely on data rate and therefore link frequency. Number of lanes doesn't change them. Dave > Best regards, > Alexander > > > + .tclkpost = 79, > > + .thszero = 47, > > + .thsprepare = 23, > > + .tclktrail = 23, > > + .thstrail = 23, > > + .tclkzero = 87, > > + .tclkprepare = 23, > > + .tlpx = 23, > > +}; > > + > > +static const struct imx290_csi_cfg imx290_csi_297mhz = { > > + /* 297MHz or 594Mbit/s per lane */ > > + .repitition = 0x00, > > + .tclkpost = 103, > > + .thszero = 87, > > + .thsprepare = 47, > > + .tclktrail = 39, > > + .thstrail = 47, > > + .tclkzero = 191, > > + .tclkprepare = 47, > > + .tlpx = 39, > > +}; > > + > > /* supported link frequencies */ > > #define FREQ_INDEX_1080P 0 > > #define FREQ_INDEX_720P 1 > > @@ -536,6 +580,42 @@ static int imx290_set_black_level(struct imx290 > > *imx290, black_level >> (16 - bpp), err); > > } > > > > +static int imx290_set_csi_config(struct imx290 *imx290) > > +{ > > + const s64 *link_freqs = imx290_link_freqs_ptr(imx290); > > + const struct imx290_csi_cfg *csi_cfg; > > + int ret = 0; > > + > > + switch (link_freqs[imx290->current_mode->link_freq_index]) { > > + case 445500000: > > + csi_cfg = &imx290_csi_445_5mhz; > > + break; > > + case 297000000: > > + csi_cfg = &imx290_csi_297mhz; > > + break; > > + case 222750000: > > + csi_cfg = &imx290_csi_222_75mhz; > > + break; > > + case 148500000: > > + csi_cfg = &imx290_csi_148_5mhz; > > + break; > > + default: > > + return -EINVAL; > > + } > > + > > + imx290_write(imx290, IMX290_REPETITION, csi_cfg->repitition, &ret); > > + imx290_write(imx290, IMX290_TCLKPOST, csi_cfg->tclkpost, &ret); > > + imx290_write(imx290, IMX290_THSZERO, csi_cfg->thszero, &ret); > > + imx290_write(imx290, IMX290_THSPREPARE, csi_cfg->thsprepare, &ret); > > + imx290_write(imx290, IMX290_TCLKTRAIL, csi_cfg->tclktrail, &ret); > > + imx290_write(imx290, IMX290_THSTRAIL, csi_cfg->thstrail, &ret); > > + imx290_write(imx290, IMX290_TCLKZERO, csi_cfg->tclkzero, &ret); > > + imx290_write(imx290, IMX290_TCLKPREPARE, csi_cfg->tclkprepare, > &ret); > > + imx290_write(imx290, IMX290_TLPX, csi_cfg->tlpx, &ret); > > + > > + return ret; > > +} > > + > > static int imx290_setup_format(struct imx290 *imx290, > > const struct v4l2_mbus_framefmt *format) > > { > > @@ -748,6 +828,12 @@ static int imx290_start_streaming(struct imx290 > > *imx290, return ret; > > } > > > > + ret = imx290_set_csi_config(imx290); > > + if (ret < 0) { > > + dev_err(imx290->dev, "Could not set csi cfg\n"); > > + return ret; > > + } > > + > > /* Apply the register values related to current frame format */ > > format = v4l2_subdev_get_pad_format(&imx290->sd, state, 0); > > ret = imx290_setup_format(imx290, format); > > > >
diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c index 6bcfa535872f..9ddd6382b127 100644 --- a/drivers/media/i2c/imx290.c +++ b/drivers/media/i2c/imx290.c @@ -174,6 +174,18 @@ struct imx290_mode { u32 data_size; }; +struct imx290_csi_cfg { + u16 repitition; + u16 tclkpost; + u16 thszero; + u16 thsprepare; + u16 tclktrail; + u16 thstrail; + u16 tclkzero; + u16 tclkprepare; + u16 tlpx; +}; + struct imx290 { struct device *dev; struct clk *xclk; @@ -273,16 +285,6 @@ static const struct imx290_regval imx290_1080p_settings[] = { { IMX290_INCKSEL4, 0x01 }, { IMX290_INCKSEL5, 0x1a }, { IMX290_INCKSEL6, 0x1a }, - /* data rate settings */ - { IMX290_REPETITION, 0x10 }, - { IMX290_TCLKPOST, 87 }, - { IMX290_THSZERO, 55 }, - { IMX290_THSPREPARE, 31 }, - { IMX290_TCLKTRAIL, 31 }, - { IMX290_THSTRAIL, 31 }, - { IMX290_TCLKZERO, 119 }, - { IMX290_TCLKPREPARE, 31 }, - { IMX290_TLPX, 23 }, }; static const struct imx290_regval imx290_720p_settings[] = { @@ -298,16 +300,6 @@ static const struct imx290_regval imx290_720p_settings[] = { { IMX290_INCKSEL4, 0x01 }, { IMX290_INCKSEL5, 0x1a }, { IMX290_INCKSEL6, 0x1a }, - /* data rate settings */ - { IMX290_REPETITION, 0x10 }, - { IMX290_TCLKPOST, 79 }, - { IMX290_THSZERO, 47 }, - { IMX290_THSPREPARE, 23 }, - { IMX290_TCLKTRAIL, 23 }, - { IMX290_THSTRAIL, 23 }, - { IMX290_TCLKZERO, 87 }, - { IMX290_TCLKPREPARE, 23 }, - { IMX290_TLPX, 23 }, }; static const struct imx290_regval imx290_10bit_settings[] = { @@ -328,6 +320,58 @@ static const struct imx290_regval imx290_12bit_settings[] = { { IMX290_CSI_DT_FMT, IMX290_CSI_DT_FMT_RAW12 }, }; +static const struct imx290_csi_cfg imx290_csi_222_75mhz = { + /* 222.25MHz or 445.5Mbit/s per lane */ + .repitition = 0x10, + .tclkpost = 87, + .thszero = 55, + .thsprepare = 31, + .tclktrail = 31, + .thstrail = 31, + .tclkzero = 119, + .tclkprepare = 31, + .tlpx = 23, +}; + +static const struct imx290_csi_cfg imx290_csi_445_5mhz = { + /* 445.5MHz or 891Mbit/s per lane */ + .repitition = 0x00, + .tclkpost = 119, + .thszero = 103, + .thsprepare = 71, + .tclktrail = 55, + .thstrail = 63, + .tclkzero = 255, + .tclkprepare = 63, + .tlpx = 55, +}; + +static const struct imx290_csi_cfg imx290_csi_148_5mhz = { + /* 148.5MHz or 297Mbit/s per lane */ + .repitition = 0x10, + .tclkpost = 79, + .thszero = 47, + .thsprepare = 23, + .tclktrail = 23, + .thstrail = 23, + .tclkzero = 87, + .tclkprepare = 23, + .tlpx = 23, +}; + +static const struct imx290_csi_cfg imx290_csi_297mhz = { + /* 297MHz or 594Mbit/s per lane */ + .repitition = 0x00, + .tclkpost = 103, + .thszero = 87, + .thsprepare = 47, + .tclktrail = 39, + .thstrail = 47, + .tclkzero = 191, + .tclkprepare = 47, + .tlpx = 39, +}; + /* supported link frequencies */ #define FREQ_INDEX_1080P 0 #define FREQ_INDEX_720P 1 @@ -536,6 +580,42 @@ static int imx290_set_black_level(struct imx290 *imx290, black_level >> (16 - bpp), err); } +static int imx290_set_csi_config(struct imx290 *imx290) +{ + const s64 *link_freqs = imx290_link_freqs_ptr(imx290); + const struct imx290_csi_cfg *csi_cfg; + int ret = 0; + + switch (link_freqs[imx290->current_mode->link_freq_index]) { + case 445500000: + csi_cfg = &imx290_csi_445_5mhz; + break; + case 297000000: + csi_cfg = &imx290_csi_297mhz; + break; + case 222750000: + csi_cfg = &imx290_csi_222_75mhz; + break; + case 148500000: + csi_cfg = &imx290_csi_148_5mhz; + break; + default: + return -EINVAL; + } + + imx290_write(imx290, IMX290_REPETITION, csi_cfg->repitition, &ret); + imx290_write(imx290, IMX290_TCLKPOST, csi_cfg->tclkpost, &ret); + imx290_write(imx290, IMX290_THSZERO, csi_cfg->thszero, &ret); + imx290_write(imx290, IMX290_THSPREPARE, csi_cfg->thsprepare, &ret); + imx290_write(imx290, IMX290_TCLKTRAIL, csi_cfg->tclktrail, &ret); + imx290_write(imx290, IMX290_THSTRAIL, csi_cfg->thstrail, &ret); + imx290_write(imx290, IMX290_TCLKZERO, csi_cfg->tclkzero, &ret); + imx290_write(imx290, IMX290_TCLKPREPARE, csi_cfg->tclkprepare, &ret); + imx290_write(imx290, IMX290_TLPX, csi_cfg->tlpx, &ret); + + return ret; +} + static int imx290_setup_format(struct imx290 *imx290, const struct v4l2_mbus_framefmt *format) { @@ -748,6 +828,12 @@ static int imx290_start_streaming(struct imx290 *imx290, return ret; } + ret = imx290_set_csi_config(imx290); + if (ret < 0) { + dev_err(imx290->dev, "Could not set csi cfg\n"); + return ret; + } + /* Apply the register values related to current frame format */ format = v4l2_subdev_get_pad_format(&imx290->sd, state, 0); ret = imx290_setup_format(imx290, format);
Commit "98e0500eadb7 media: i2c: imx290: Add configurable link frequency and pixel rate" added support for the increased link frequencies on 2 data lanes, but didn't update the CSI timing registers in accordance with the datasheet. Use the specified settings. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> --- drivers/media/i2c/imx290.c | 126 +++++++++++++++++++++++++++++++------ 1 file changed, 106 insertions(+), 20 deletions(-)