diff mbox series

[12/23] interconnect: qcom: sm8450: fix registration race

Message ID 20230201101559.15529-13-johan+linaro@kernel.org (mailing list archive)
State New
Headers show
Series interconnect: fix racy provider registration | expand

Commit Message

Johan Hovold Feb. 1, 2023, 10:15 a.m. UTC
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.

Switch to using the new API where the provider is not registered until
after it has been fully initialised.

Fixes: fafc114a468e ("interconnect: qcom: Add SM8450 interconnect provider driver")
Cc: stable@vger.kernel.org      # 5.17
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/interconnect/qcom/sm8450.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

Comments

Konrad Dybcio Feb. 3, 2023, 2:56 a.m. UTC | #1
On 1.02.2023 11:15, Johan Hovold wrote:
> The current interconnect provider registration interface is inherently
> racy as nodes are not added until the after adding the provider. This
> can specifically cause racing DT lookups to fail.
> 
> Switch to using the new API where the provider is not registered until
> after it has been fully initialised.
> 
> Fixes: fafc114a468e ("interconnect: qcom: Add SM8450 interconnect provider driver")
> Cc: stable@vger.kernel.org      # 5.17
> Cc: Vinod Koul <vkoul@kernel.org>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  drivers/interconnect/qcom/sm8450.c | 22 +++++++++++-----------
>  1 file changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/interconnect/qcom/sm8450.c b/drivers/interconnect/qcom/sm8450.c
> index e3a12e3d6e06..c7a8bbf102a3 100644
> --- a/drivers/interconnect/qcom/sm8450.c
> +++ b/drivers/interconnect/qcom/sm8450.c
> @@ -1876,9 +1876,10 @@ static int qnoc_probe(struct platform_device *pdev)
>  	provider->pre_aggregate = qcom_icc_pre_aggregate;
>  	provider->aggregate = qcom_icc_aggregate;
>  	provider->xlate_extended = qcom_icc_xlate_extended;
> -	INIT_LIST_HEAD(&provider->nodes);
>  	provider->data = data;
>  
> +	icc_provider_init(provider);
> +
>  	qp->dev = &pdev->dev;
>  	qp->bcms = desc->bcms;
>  	qp->num_bcms = desc->num_bcms;
> @@ -1887,12 +1888,6 @@ static int qnoc_probe(struct platform_device *pdev)
>  	if (IS_ERR(qp->voter))
>  		return PTR_ERR(qp->voter);
>  
> -	ret = icc_provider_add(provider);
> -	if (ret) {
> -		dev_err(&pdev->dev, "error adding interconnect provider\n");
> -		return ret;
> -	}
> -
>  	for (i = 0; i < qp->num_bcms; i++)
>  		qcom_icc_bcm_init(qp->bcms[i], &pdev->dev);
>  
> @@ -1905,7 +1900,7 @@ static int qnoc_probe(struct platform_device *pdev)
>  		node = icc_node_create(qnodes[i]->id);
>  		if (IS_ERR(node)) {
>  			ret = PTR_ERR(node);
> -			goto err;
> +			goto err_remove_nodes;
>  		}
>  
>  		node->name = qnodes[i]->name;
> @@ -1919,12 +1914,17 @@ static int qnoc_probe(struct platform_device *pdev)
>  	}
>  	data->num_nodes = num_nodes;
>  
> +	ret = icc_provider_register(provider);
> +	if (ret)
> +		goto err_remove_nodes;
> +
>  	platform_set_drvdata(pdev, qp);
>  
>  	return 0;
> -err:
> +
> +err_remove_nodes:
>  	icc_nodes_remove(provider);
> -	icc_provider_del(provider);
> +
>  	return ret;
>  }
>  
> @@ -1932,8 +1932,8 @@ static int qnoc_remove(struct platform_device *pdev)
>  {
>  	struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
>  
> +	icc_provider_deregister(&qp->provider);
>  	icc_nodes_remove(&qp->provider);
> -	icc_provider_del(&qp->provider);
>  
>  	return 0;
>  }
Vinod Koul Feb. 6, 2023, 12:10 p.m. UTC | #2
On 01-02-23, 11:15, Johan Hovold wrote:
> The current interconnect provider registration interface is inherently
> racy as nodes are not added until the after adding the provider. This
> can specifically cause racing DT lookups to fail.
> 
> Switch to using the new API where the provider is not registered until
> after it has been fully initialised.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
diff mbox series

Patch

diff --git a/drivers/interconnect/qcom/sm8450.c b/drivers/interconnect/qcom/sm8450.c
index e3a12e3d6e06..c7a8bbf102a3 100644
--- a/drivers/interconnect/qcom/sm8450.c
+++ b/drivers/interconnect/qcom/sm8450.c
@@ -1876,9 +1876,10 @@  static int qnoc_probe(struct platform_device *pdev)
 	provider->pre_aggregate = qcom_icc_pre_aggregate;
 	provider->aggregate = qcom_icc_aggregate;
 	provider->xlate_extended = qcom_icc_xlate_extended;
-	INIT_LIST_HEAD(&provider->nodes);
 	provider->data = data;
 
+	icc_provider_init(provider);
+
 	qp->dev = &pdev->dev;
 	qp->bcms = desc->bcms;
 	qp->num_bcms = desc->num_bcms;
@@ -1887,12 +1888,6 @@  static int qnoc_probe(struct platform_device *pdev)
 	if (IS_ERR(qp->voter))
 		return PTR_ERR(qp->voter);
 
-	ret = icc_provider_add(provider);
-	if (ret) {
-		dev_err(&pdev->dev, "error adding interconnect provider\n");
-		return ret;
-	}
-
 	for (i = 0; i < qp->num_bcms; i++)
 		qcom_icc_bcm_init(qp->bcms[i], &pdev->dev);
 
@@ -1905,7 +1900,7 @@  static int qnoc_probe(struct platform_device *pdev)
 		node = icc_node_create(qnodes[i]->id);
 		if (IS_ERR(node)) {
 			ret = PTR_ERR(node);
-			goto err;
+			goto err_remove_nodes;
 		}
 
 		node->name = qnodes[i]->name;
@@ -1919,12 +1914,17 @@  static int qnoc_probe(struct platform_device *pdev)
 	}
 	data->num_nodes = num_nodes;
 
+	ret = icc_provider_register(provider);
+	if (ret)
+		goto err_remove_nodes;
+
 	platform_set_drvdata(pdev, qp);
 
 	return 0;
-err:
+
+err_remove_nodes:
 	icc_nodes_remove(provider);
-	icc_provider_del(provider);
+
 	return ret;
 }
 
@@ -1932,8 +1932,8 @@  static int qnoc_remove(struct platform_device *pdev)
 {
 	struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
 
+	icc_provider_deregister(&qp->provider);
 	icc_nodes_remove(&qp->provider);
-	icc_provider_del(&qp->provider);
 
 	return 0;
 }