diff mbox series

[v5,2/2] fpga: zynqmp-fpga: Adds status interface

Message ID 20230131094810.1945541-3-nava.kishore.manne@amd.com (mailing list archive)
State New
Headers show
Series Adds status interface for zynqmp-fpga | expand

Commit Message

Manne, Nava kishore Jan. 31, 2023, 9:48 a.m. UTC
Adds status interface for zynqmp-fpga, It's a read only interface
which allows the user to get the Programmable Logic(PL) configuration
status.

Usage:
To read the Programmable Logic(PL) configuration status
        cat /sys/class/fpga_manager/<fpga>/device/status

Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
---
Changes for v2:
              - Updated status messages handling logic as suggested by Xu Yilun.

Changes for v3:
              - Updated status interface handling logic (Restrict the status
                interface to the device-specific instead of handled by the core)
                as suggested by Xu Yilun.

Changes for v4:
              - Limit the error strings to one word for each as suggested by
                Xu Yilun

Changes for v5:
              - Added new sysfs-driver-zynqmp-fpga file.

 .../ABI/testing/sysfs-driver-zynqmp-fpga      | 18 ++++
 drivers/fpga/zynqmp-fpga.c                    | 87 +++++++++++++++++++
 2 files changed, 105 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-driver-zynqmp-fpga

Comments

Greg KH Jan. 31, 2023, 11:42 a.m. UTC | #1
On Tue, Jan 31, 2023 at 03:18:10PM +0530, Nava kishore Manne wrote:
> Adds status interface for zynqmp-fpga, It's a read only interface
> which allows the user to get the Programmable Logic(PL) configuration
> status.
> 
> Usage:
> To read the Programmable Logic(PL) configuration status
>         cat /sys/class/fpga_manager/<fpga>/device/status
> 
> Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
> ---
> Changes for v2:
>               - Updated status messages handling logic as suggested by Xu Yilun.
> 
> Changes for v3:
>               - Updated status interface handling logic (Restrict the status
>                 interface to the device-specific instead of handled by the core)
>                 as suggested by Xu Yilun.
> 
> Changes for v4:
>               - Limit the error strings to one word for each as suggested by
>                 Xu Yilun
> 
> Changes for v5:
>               - Added new sysfs-driver-zynqmp-fpga file.
> 
>  .../ABI/testing/sysfs-driver-zynqmp-fpga      | 18 ++++
>  drivers/fpga/zynqmp-fpga.c                    | 87 +++++++++++++++++++
>  2 files changed, 105 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> 
> diff --git a/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> new file mode 100644
> index 000000000000..66c98bb8dfba
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> @@ -0,0 +1,18 @@
> +What:		/sys/class/fpga_manager/<fpga>/device/status
> +Date:		Jan 2023
> +KernelVersion:	6.2
> +Contact:	Nava kishore Manne <nava.kishore.manne@amd.com>
> +Description:	Read fpga status as a string.
> +		If FPGA programming operation fails, it could be caused by crc
> +		error or incompatible bitstream image. The intent of this
> +		interface is to provide more detailed information for FPGA
> +		programming errors to userspace. This is a list of strings for
> +		the supported status.
> +
> +		* CRC-Error		- CRC error detected by hardware.
> +		* Security-Error	- Security error detected by hardware.
> +		* Initialization-Error	- Device Initialization error.
> +		* Internal-Signal-Error	- Device internal signal error.
> +		* I/Os-High-Z-state	- All I/Os are placed in High-Z state.
> +		* Sequence-Error	- Device start-up sequence error.
> +		* Firmware-Error	- Firmware error.
> diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c
> index c60f20949c47..81d3e18527ee 100644
> --- a/drivers/fpga/zynqmp-fpga.c
> +++ b/drivers/fpga/zynqmp-fpga.c
> @@ -15,6 +15,37 @@
>  /* Constant Definitions */
>  #define IXR_FPGA_DONE_MASK	BIT(3)
>  
> +/* Error Register */
> +#define IXR_FPGA_ERR_CRC_ERR		BIT(0)
> +#define IXR_FPGA_ERR_SECURITY_ERR	BIT(16)
> +
> +/* Signal Status Register */
> +#define IXR_FPGA_END_OF_STARTUP		BIT(4)
> +#define IXR_FPGA_GST_CFG_B		BIT(5)
> +#define IXR_FPGA_INIT_B_INTERNAL	BIT(11)
> +#define IXR_FPGA_DONE_INTERNAL_SIGNAL	BIT(13)
> +
> +/* FPGA error status. */
> +enum {
> +	ZYNQMP_FPGA_STATUS_CRC_ERR,
> +	ZYNQMP_FPGA_STATUS_SECURITY_ERR,
> +	ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR,
> +	ZYNQMP_FPGA_STATUS_SIGNAL_ERR,
> +	ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR,
> +	ZYNQMP_FPGA_STATUS_EOS_ERR,
> +	ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR,
> +};
> +
> +static const char * const zynqmp_fpga_error_statuses[] = {
> +	[ZYNQMP_FPGA_STATUS_CRC_ERR] = "CRC-Error",
> +	[ZYNQMP_FPGA_STATUS_SECURITY_ERR] = "Security-Error",
> +	[ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR] = "Initialization-Error",
> +	[ZYNQMP_FPGA_STATUS_SIGNAL_ERR] = "Internal-Signal-Error",
> +	[ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR] = "I/Os-High-Z-state",
> +	[ZYNQMP_FPGA_STATUS_EOS_ERR] = "Sequence-Error",
> +	[ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR] = "Firmware-Error",
> +};
> +
>  /**
>   * struct zynqmp_fpga_priv - Private data structure
>   * @dev:	Device data structure
> @@ -77,6 +108,54 @@ static enum fpga_mgr_states zynqmp_fpga_ops_state(struct fpga_manager *mgr)
>  	return FPGA_MGR_STATE_UNKNOWN;
>  }
>  
> +static ssize_t status_show(struct device *dev,
> +			   struct device_attribute *attr, char *buf)
> +{
> +	unsigned long status = 0;
> +	ssize_t len = 0;
> +	u32 reg_val;
> +	int ret;
> +	u8 i;
> +
> +	ret = zynqmp_pm_fpga_get_config_status(&reg_val);
> +	if (!ret) {
> +		if (reg_val & IXR_FPGA_ERR_CRC_ERR)
> +			status |= ZYNQMP_FPGA_STATUS_CRC_ERR;
> +		if (reg_val & IXR_FPGA_ERR_SECURITY_ERR)
> +			status |= ZYNQMP_FPGA_STATUS_SECURITY_ERR;
> +		if (!(reg_val & IXR_FPGA_INIT_B_INTERNAL))
> +			status |= ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR;
> +		if (!(reg_val & IXR_FPGA_DONE_INTERNAL_SIGNAL))
> +			status |= ZYNQMP_FPGA_STATUS_SIGNAL_ERR;
> +		if (!(reg_val & IXR_FPGA_GST_CFG_B))
> +			status |= ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR;
> +		if (!(reg_val & IXR_FPGA_END_OF_STARTUP))
> +			status |= ZYNQMP_FPGA_STATUS_EOS_ERR;
> +	} else {
> +		status = ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR;
> +	}
> +
> +	for_each_set_bit(i, &status, ARRAY_SIZE(zynqmp_fpga_error_statuses))
> +		len += sysfs_emit_at(buf, len, "%s ",
> +				     zynqmp_fpga_error_statuses[i]);
> +

Sorry, but no, you can not export a list of strings that userspace is
somehow going to parse.

As this is all a bit field, why not just export the raw hex value
instead and let userspace parse what bits are set?

thanks,

greg k-h
Manne, Nava kishore Feb. 7, 2023, 9:23 a.m. UTC | #2
Hi Greg,

	Thanks for providing the review comments.
Please find my response inline.

> -----Original Message-----
> From: Greg KH <gregkh@linuxfoundation.org>
> Sent: Tuesday, January 31, 2023 5:13 PM
> To: Manne, Nava kishore <nava.kishore.manne@amd.com>
> Cc: michal.simek@xilinx.com; mdf@kernel.org; hao.wu@intel.com;
> yilun.xu@intel.com; trix@redhat.com; ronak.jain@xilinx.com;
> tanmay.shah@xilinx.com; Levinsky, Ben <ben.levinsky@amd.com>;
> rajan.vaja@xilinx.com; harsha.harsha@xilinx.com;
> mathieu.poirier@linaro.org; lakshmi.sai.krishna.potthuri@xilinx.com;
> arnd@arndb.de; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; linux-fpga@vger.kernel.org
> Subject: Re: [PATCH v5 2/2] fpga: zynqmp-fpga: Adds status interface
> 
> On Tue, Jan 31, 2023 at 03:18:10PM +0530, Nava kishore Manne wrote:
> > Adds status interface for zynqmp-fpga, It's a read only interface
> > which allows the user to get the Programmable Logic(PL) configuration
> > status.
> >
> > Usage:
> > To read the Programmable Logic(PL) configuration status
> >         cat /sys/class/fpga_manager/<fpga>/device/status
> >
> > Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
> > ---
> > Changes for v2:
> >               - Updated status messages handling logic as suggested by Xu Yilun.
> >
> > Changes for v3:
> >               - Updated status interface handling logic (Restrict the status
> >                 interface to the device-specific instead of handled by the core)
> >                 as suggested by Xu Yilun.
> >
> > Changes for v4:
> >               - Limit the error strings to one word for each as suggested by
> >                 Xu Yilun
> >
> > Changes for v5:
> >               - Added new sysfs-driver-zynqmp-fpga file.
> >
> >  .../ABI/testing/sysfs-driver-zynqmp-fpga      | 18 ++++
> >  drivers/fpga/zynqmp-fpga.c                    | 87 +++++++++++++++++++
> >  2 files changed, 105 insertions(+)
> >  create mode 100644 Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> >
> > diff --git a/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> > b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> > new file mode 100644
> > index 000000000000..66c98bb8dfba
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> > @@ -0,0 +1,18 @@
> > +What:		/sys/class/fpga_manager/<fpga>/device/status
> > +Date:		Jan 2023
> > +KernelVersion:	6.2
> > +Contact:	Nava kishore Manne <nava.kishore.manne@amd.com>
> > +Description:	Read fpga status as a string.
> > +		If FPGA programming operation fails, it could be caused by
> crc
> > +		error or incompatible bitstream image. The intent of this
> > +		interface is to provide more detailed information for FPGA
> > +		programming errors to userspace. This is a list of strings for
> > +		the supported status.
> > +
> > +		* CRC-Error		- CRC error detected by hardware.
> > +		* Security-Error	- Security error detected by hardware.
> > +		* Initialization-Error	- Device Initialization error.
> > +		* Internal-Signal-Error	- Device internal signal error.
> > +		* I/Os-High-Z-state	- All I/Os are placed in High-Z state.
> > +		* Sequence-Error	- Device start-up sequence error.
> > +		* Firmware-Error	- Firmware error.
> > diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c
> > index c60f20949c47..81d3e18527ee 100644
> > --- a/drivers/fpga/zynqmp-fpga.c
> > +++ b/drivers/fpga/zynqmp-fpga.c
> > @@ -15,6 +15,37 @@
> >  /* Constant Definitions */
> >  #define IXR_FPGA_DONE_MASK	BIT(3)
> >
> > +/* Error Register */
> > +#define IXR_FPGA_ERR_CRC_ERR		BIT(0)
> > +#define IXR_FPGA_ERR_SECURITY_ERR	BIT(16)
> > +
> > +/* Signal Status Register */
> > +#define IXR_FPGA_END_OF_STARTUP		BIT(4)
> > +#define IXR_FPGA_GST_CFG_B		BIT(5)
> > +#define IXR_FPGA_INIT_B_INTERNAL	BIT(11)
> > +#define IXR_FPGA_DONE_INTERNAL_SIGNAL	BIT(13)
> > +
> > +/* FPGA error status. */
> > +enum {
> > +	ZYNQMP_FPGA_STATUS_CRC_ERR,
> > +	ZYNQMP_FPGA_STATUS_SECURITY_ERR,
> > +	ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR,
> > +	ZYNQMP_FPGA_STATUS_SIGNAL_ERR,
> > +	ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR,
> > +	ZYNQMP_FPGA_STATUS_EOS_ERR,
> > +	ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR,
> > +};
> > +
> > +static const char * const zynqmp_fpga_error_statuses[] = {
> > +	[ZYNQMP_FPGA_STATUS_CRC_ERR] = "CRC-Error",
> > +	[ZYNQMP_FPGA_STATUS_SECURITY_ERR] = "Security-Error",
> > +	[ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR] = "Initialization-Error",
> > +	[ZYNQMP_FPGA_STATUS_SIGNAL_ERR] = "Internal-Signal-Error",
> > +	[ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR] = "I/Os-High-Z-state",
> > +	[ZYNQMP_FPGA_STATUS_EOS_ERR] = "Sequence-Error",
> > +	[ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR] = "Firmware-
> Error", };
> > +
> >  /**
> >   * struct zynqmp_fpga_priv - Private data structure
> >   * @dev:	Device data structure
> > @@ -77,6 +108,54 @@ static enum fpga_mgr_states
> zynqmp_fpga_ops_state(struct fpga_manager *mgr)
> >  	return FPGA_MGR_STATE_UNKNOWN;
> >  }
> >
> > +static ssize_t status_show(struct device *dev,
> > +			   struct device_attribute *attr, char *buf) {
> > +	unsigned long status = 0;
> > +	ssize_t len = 0;
> > +	u32 reg_val;
> > +	int ret;
> > +	u8 i;
> > +
> > +	ret = zynqmp_pm_fpga_get_config_status(&reg_val);
> > +	if (!ret) {
> > +		if (reg_val & IXR_FPGA_ERR_CRC_ERR)
> > +			status |= ZYNQMP_FPGA_STATUS_CRC_ERR;
> > +		if (reg_val & IXR_FPGA_ERR_SECURITY_ERR)
> > +			status |= ZYNQMP_FPGA_STATUS_SECURITY_ERR;
> > +		if (!(reg_val & IXR_FPGA_INIT_B_INTERNAL))
> > +			status |= ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR;
> > +		if (!(reg_val & IXR_FPGA_DONE_INTERNAL_SIGNAL))
> > +			status |= ZYNQMP_FPGA_STATUS_SIGNAL_ERR;
> > +		if (!(reg_val & IXR_FPGA_GST_CFG_B))
> > +			status |=
> ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR;
> > +		if (!(reg_val & IXR_FPGA_END_OF_STARTUP))
> > +			status |= ZYNQMP_FPGA_STATUS_EOS_ERR;
> > +	} else {
> > +		status =
> ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR;
> > +	}
> > +
> > +	for_each_set_bit(i, &status,
> ARRAY_SIZE(zynqmp_fpga_error_statuses))
> > +		len += sysfs_emit_at(buf, len, "%s ",
> > +				     zynqmp_fpga_error_statuses[i]);
> > +
> 
> Sorry, but no, you can not export a list of strings that userspace is somehow
> going to parse.
> 
> As this is all a bit field, why not just export the raw hex value instead and let
> userspace parse what bits are set?
> 

This implementation is align with the fpga core status interface(https://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga.git/tree/drivers/fpga/fpga-mgr.c?h=for-6.2#n632)
I Agree to export the raw hex value instead of multiple error strings.
In case of exporting the raw hex value for status can we update this fpga-mgr.c core file (status_show() API) 
instead of creating individual sysfs file per driver/device? and with this proposed implementation
will also fix the issues/Limitations with generic status interface.

Existing limitation with the generic fpga status interface: 
Different vendors have different error sets defined by Hardware. If we always define the new bits when we cannot find an exact 1:1
mapping in the core the 64 bits would soon be used out. 

Xu Yilun: Can you please share your thoughts here?  

Regards,
Navakishore.
Xu Yilun Feb. 7, 2023, 4:34 p.m. UTC | #3
On 2023-02-07 at 09:23:12 +0000, Manne, Nava kishore wrote:
> Hi Greg,
> 
> 	Thanks for providing the review comments.
> Please find my response inline.
> 
> > -----Original Message-----
> > From: Greg KH <gregkh@linuxfoundation.org>
> > Sent: Tuesday, January 31, 2023 5:13 PM
> > To: Manne, Nava kishore <nava.kishore.manne@amd.com>
> > Cc: michal.simek@xilinx.com; mdf@kernel.org; hao.wu@intel.com;
> > yilun.xu@intel.com; trix@redhat.com; ronak.jain@xilinx.com;
> > tanmay.shah@xilinx.com; Levinsky, Ben <ben.levinsky@amd.com>;
> > rajan.vaja@xilinx.com; harsha.harsha@xilinx.com;
> > mathieu.poirier@linaro.org; lakshmi.sai.krishna.potthuri@xilinx.com;
> > arnd@arndb.de; linux-arm-kernel@lists.infradead.org; linux-
> > kernel@vger.kernel.org; linux-fpga@vger.kernel.org
> > Subject: Re: [PATCH v5 2/2] fpga: zynqmp-fpga: Adds status interface
> > 
> > On Tue, Jan 31, 2023 at 03:18:10PM +0530, Nava kishore Manne wrote:
> > > Adds status interface for zynqmp-fpga, It's a read only interface
> > > which allows the user to get the Programmable Logic(PL) configuration
> > > status.
> > >
> > > Usage:
> > > To read the Programmable Logic(PL) configuration status
> > >         cat /sys/class/fpga_manager/<fpga>/device/status
> > >
> > > Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
> > > ---
> > > Changes for v2:
> > >               - Updated status messages handling logic as suggested by Xu Yilun.
> > >
> > > Changes for v3:
> > >               - Updated status interface handling logic (Restrict the status
> > >                 interface to the device-specific instead of handled by the core)
> > >                 as suggested by Xu Yilun.
> > >
> > > Changes for v4:
> > >               - Limit the error strings to one word for each as suggested by
> > >                 Xu Yilun
> > >
> > > Changes for v5:
> > >               - Added new sysfs-driver-zynqmp-fpga file.
> > >
> > >  .../ABI/testing/sysfs-driver-zynqmp-fpga      | 18 ++++
> > >  drivers/fpga/zynqmp-fpga.c                    | 87 +++++++++++++++++++
> > >  2 files changed, 105 insertions(+)
> > >  create mode 100644 Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> > >
> > > diff --git a/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> > > b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> > > new file mode 100644
> > > index 000000000000..66c98bb8dfba
> > > --- /dev/null
> > > +++ b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> > > @@ -0,0 +1,18 @@
> > > +What:		/sys/class/fpga_manager/<fpga>/device/status
> > > +Date:		Jan 2023
> > > +KernelVersion:	6.2
> > > +Contact:	Nava kishore Manne <nava.kishore.manne@amd.com>
> > > +Description:	Read fpga status as a string.
> > > +		If FPGA programming operation fails, it could be caused by
> > crc
> > > +		error or incompatible bitstream image. The intent of this
> > > +		interface is to provide more detailed information for FPGA
> > > +		programming errors to userspace. This is a list of strings for
> > > +		the supported status.
> > > +
> > > +		* CRC-Error		- CRC error detected by hardware.
> > > +		* Security-Error	- Security error detected by hardware.
> > > +		* Initialization-Error	- Device Initialization error.
> > > +		* Internal-Signal-Error	- Device internal signal error.
> > > +		* I/Os-High-Z-state	- All I/Os are placed in High-Z state.
> > > +		* Sequence-Error	- Device start-up sequence error.
> > > +		* Firmware-Error	- Firmware error.
> > > diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c
> > > index c60f20949c47..81d3e18527ee 100644
> > > --- a/drivers/fpga/zynqmp-fpga.c
> > > +++ b/drivers/fpga/zynqmp-fpga.c
> > > @@ -15,6 +15,37 @@
> > >  /* Constant Definitions */
> > >  #define IXR_FPGA_DONE_MASK	BIT(3)
> > >
> > > +/* Error Register */
> > > +#define IXR_FPGA_ERR_CRC_ERR		BIT(0)
> > > +#define IXR_FPGA_ERR_SECURITY_ERR	BIT(16)
> > > +
> > > +/* Signal Status Register */
> > > +#define IXR_FPGA_END_OF_STARTUP		BIT(4)
> > > +#define IXR_FPGA_GST_CFG_B		BIT(5)
> > > +#define IXR_FPGA_INIT_B_INTERNAL	BIT(11)
> > > +#define IXR_FPGA_DONE_INTERNAL_SIGNAL	BIT(13)
> > > +
> > > +/* FPGA error status. */
> > > +enum {
> > > +	ZYNQMP_FPGA_STATUS_CRC_ERR,
> > > +	ZYNQMP_FPGA_STATUS_SECURITY_ERR,
> > > +	ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR,
> > > +	ZYNQMP_FPGA_STATUS_SIGNAL_ERR,
> > > +	ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR,
> > > +	ZYNQMP_FPGA_STATUS_EOS_ERR,
> > > +	ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR,
> > > +};
> > > +
> > > +static const char * const zynqmp_fpga_error_statuses[] = {
> > > +	[ZYNQMP_FPGA_STATUS_CRC_ERR] = "CRC-Error",
> > > +	[ZYNQMP_FPGA_STATUS_SECURITY_ERR] = "Security-Error",
> > > +	[ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR] = "Initialization-Error",
> > > +	[ZYNQMP_FPGA_STATUS_SIGNAL_ERR] = "Internal-Signal-Error",
> > > +	[ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR] = "I/Os-High-Z-state",
> > > +	[ZYNQMP_FPGA_STATUS_EOS_ERR] = "Sequence-Error",
> > > +	[ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR] = "Firmware-
> > Error", };
> > > +
> > >  /**
> > >   * struct zynqmp_fpga_priv - Private data structure
> > >   * @dev:	Device data structure
> > > @@ -77,6 +108,54 @@ static enum fpga_mgr_states
> > zynqmp_fpga_ops_state(struct fpga_manager *mgr)
> > >  	return FPGA_MGR_STATE_UNKNOWN;
> > >  }
> > >
> > > +static ssize_t status_show(struct device *dev,
> > > +			   struct device_attribute *attr, char *buf) {
> > > +	unsigned long status = 0;
> > > +	ssize_t len = 0;
> > > +	u32 reg_val;
> > > +	int ret;
> > > +	u8 i;
> > > +
> > > +	ret = zynqmp_pm_fpga_get_config_status(&reg_val);
> > > +	if (!ret) {
> > > +		if (reg_val & IXR_FPGA_ERR_CRC_ERR)
> > > +			status |= ZYNQMP_FPGA_STATUS_CRC_ERR;
> > > +		if (reg_val & IXR_FPGA_ERR_SECURITY_ERR)
> > > +			status |= ZYNQMP_FPGA_STATUS_SECURITY_ERR;
> > > +		if (!(reg_val & IXR_FPGA_INIT_B_INTERNAL))
> > > +			status |= ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR;
> > > +		if (!(reg_val & IXR_FPGA_DONE_INTERNAL_SIGNAL))
> > > +			status |= ZYNQMP_FPGA_STATUS_SIGNAL_ERR;
> > > +		if (!(reg_val & IXR_FPGA_GST_CFG_B))
> > > +			status |=
> > ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR;
> > > +		if (!(reg_val & IXR_FPGA_END_OF_STARTUP))
> > > +			status |= ZYNQMP_FPGA_STATUS_EOS_ERR;
> > > +	} else {
> > > +		status =
> > ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR;
> > > +	}
> > > +
> > > +	for_each_set_bit(i, &status,
> > ARRAY_SIZE(zynqmp_fpga_error_statuses))
> > > +		len += sysfs_emit_at(buf, len, "%s ",
> > > +				     zynqmp_fpga_error_statuses[i]);
> > > +
> > 
> > Sorry, but no, you can not export a list of strings that userspace is somehow
> > going to parse.
> > 
> > As this is all a bit field, why not just export the raw hex value instead and let
> > userspace parse what bits are set?
> > 
> 
> This implementation is align with the fpga core status interface(https://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga.git/tree/drivers/fpga/fpga-mgr.c?h=for-6.2#n632)
> I Agree to export the raw hex value instead of multiple error strings.

I also agree, it is a much simpler implementation.

> In case of exporting the raw hex value for status can we update this fpga-mgr.c core file (status_show() API) 
> instead of creating individual sysfs file per driver/device? and with this proposed implementation

But I don't think we should change format of the existing 'status' sysfs node,
it impacts the existing users. Just freeze it and add no new user.

> will also fix the issues/Limitations with generic status interface.
> 
> Existing limitation with the generic fpga status interface: 
> Different vendors have different error sets defined by Hardware. If we always define the new bits when we cannot find an exact 1:1
> mapping in the core the 64 bits would soon be used out.

Even if we change the status interface to raw hex output, issues are still there.
I guess you may want to output bits specifically defined by each driver, but then
it makes no sense to have this generic class interface. Users can't tell
what the status is by just reading the interface.

So as I mentioned before, my preference is driver creates its own sysfs
interface for its own hardware status if needed.

Thanks,
Yilun 

> 
> Xu Yilun: Can you please share your thoughts here?  
> 
> Regards,
> Navakishore.
Xu Yilun Feb. 10, 2023, 9:18 a.m. UTC | #4
On 2023-01-31 at 15:18:10 +0530, Nava kishore Manne wrote:
> Adds status interface for zynqmp-fpga, It's a read only interface
> which allows the user to get the Programmable Logic(PL) configuration
> status.
> 
> Usage:
> To read the Programmable Logic(PL) configuration status
>         cat /sys/class/fpga_manager/<fpga>/device/status

Please don't use the 'class' path, this is not a class interface. And
people still have no idea how to reach the zynqmp-fpga status interface
with this example path.

I suggest:
	cat /sys/bus/platform/drivers/...

> 
> Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
> ---
> Changes for v2:
>               - Updated status messages handling logic as suggested by Xu Yilun.
> 
> Changes for v3:
>               - Updated status interface handling logic (Restrict the status
>                 interface to the device-specific instead of handled by the core)
>                 as suggested by Xu Yilun.
> 
> Changes for v4:
>               - Limit the error strings to one word for each as suggested by
>                 Xu Yilun
> 
> Changes for v5:
>               - Added new sysfs-driver-zynqmp-fpga file.
> 
>  .../ABI/testing/sysfs-driver-zynqmp-fpga      | 18 ++++
>  drivers/fpga/zynqmp-fpga.c                    | 87 +++++++++++++++++++
>  2 files changed, 105 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> 
> diff --git a/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> new file mode 100644
> index 000000000000..66c98bb8dfba
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
> @@ -0,0 +1,18 @@
> +What:		/sys/class/fpga_manager/<fpga>/device/status

Same concern

> +Date:		Jan 2023
> +KernelVersion:	6.2
> +Contact:	Nava kishore Manne <nava.kishore.manne@amd.com>
> +Description:	Read fpga status as a string.
> +		If FPGA programming operation fails, it could be caused by crc
> +		error or incompatible bitstream image. The intent of this
> +		interface is to provide more detailed information for FPGA
> +		programming errors to userspace. This is a list of strings for
> +		the supported status.
> +
> +		* CRC-Error		- CRC error detected by hardware.
> +		* Security-Error	- Security error detected by hardware.
> +		* Initialization-Error	- Device Initialization error.
> +		* Internal-Signal-Error	- Device internal signal error.
> +		* I/Os-High-Z-state	- All I/Os are placed in High-Z state.
> +		* Sequence-Error	- Device start-up sequence error.
> +		* Firmware-Error	- Firmware error.
> diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c
> index c60f20949c47..81d3e18527ee 100644
> --- a/drivers/fpga/zynqmp-fpga.c
> +++ b/drivers/fpga/zynqmp-fpga.c
> @@ -15,6 +15,37 @@
>  /* Constant Definitions */
>  #define IXR_FPGA_DONE_MASK	BIT(3)
>  
> +/* Error Register */
> +#define IXR_FPGA_ERR_CRC_ERR		BIT(0)
> +#define IXR_FPGA_ERR_SECURITY_ERR	BIT(16)
> +
> +/* Signal Status Register */
> +#define IXR_FPGA_END_OF_STARTUP		BIT(4)
> +#define IXR_FPGA_GST_CFG_B		BIT(5)
> +#define IXR_FPGA_INIT_B_INTERNAL	BIT(11)
> +#define IXR_FPGA_DONE_INTERNAL_SIGNAL	BIT(13)
> +
> +/* FPGA error status. */
> +enum {
> +	ZYNQMP_FPGA_STATUS_CRC_ERR,
> +	ZYNQMP_FPGA_STATUS_SECURITY_ERR,
> +	ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR,
> +	ZYNQMP_FPGA_STATUS_SIGNAL_ERR,
> +	ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR,
> +	ZYNQMP_FPGA_STATUS_EOS_ERR,
> +	ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR,
> +};
> +
> +static const char * const zynqmp_fpga_error_statuses[] = {
> +	[ZYNQMP_FPGA_STATUS_CRC_ERR] = "CRC-Error",
> +	[ZYNQMP_FPGA_STATUS_SECURITY_ERR] = "Security-Error",
> +	[ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR] = "Initialization-Error",
> +	[ZYNQMP_FPGA_STATUS_SIGNAL_ERR] = "Internal-Signal-Error",
> +	[ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR] = "I/Os-High-Z-state",
> +	[ZYNQMP_FPGA_STATUS_EOS_ERR] = "Sequence-Error",
> +	[ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR] = "Firmware-Error",
> +};
> +
>  /**
>   * struct zynqmp_fpga_priv - Private data structure
>   * @dev:	Device data structure
> @@ -77,6 +108,54 @@ static enum fpga_mgr_states zynqmp_fpga_ops_state(struct fpga_manager *mgr)
>  	return FPGA_MGR_STATE_UNKNOWN;
>  }
>  
> +static ssize_t status_show(struct device *dev,
> +			   struct device_attribute *attr, char *buf)
> +{
> +	unsigned long status = 0;
> +	ssize_t len = 0;
> +	u32 reg_val;
> +	int ret;
> +	u8 i;
> +
> +	ret = zynqmp_pm_fpga_get_config_status(&reg_val);

Just curious if there will be more than one zynq fpga devices in a
system? if yes, how to distinguish their status?

> +	if (!ret) {
> +		if (reg_val & IXR_FPGA_ERR_CRC_ERR)
> +			status |= ZYNQMP_FPGA_STATUS_CRC_ERR;
> +		if (reg_val & IXR_FPGA_ERR_SECURITY_ERR)
> +			status |= ZYNQMP_FPGA_STATUS_SECURITY_ERR;
> +		if (!(reg_val & IXR_FPGA_INIT_B_INTERNAL))
> +			status |= ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR;
> +		if (!(reg_val & IXR_FPGA_DONE_INTERNAL_SIGNAL))
> +			status |= ZYNQMP_FPGA_STATUS_SIGNAL_ERR;
> +		if (!(reg_val & IXR_FPGA_GST_CFG_B))
> +			status |= ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR;
> +		if (!(reg_val & IXR_FPGA_END_OF_STARTUP))
> +			status |= ZYNQMP_FPGA_STATUS_EOS_ERR;
> +	} else {
> +		status = ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR;
> +	}
> +
> +	for_each_set_bit(i, &status, ARRAY_SIZE(zynqmp_fpga_error_statuses))
> +		len += sysfs_emit_at(buf, len, "%s ",
> +				     zynqmp_fpga_error_statuses[i]);
> +
> +	if (len)
> +		buf[len - 1] = '\n';
> +
> +	return len;
> +}
> +
> +static DEVICE_ATTR_RO(status);
> +
> +static struct attribute *zynqmp_fpga_device_attrs[] = {
> +	&dev_attr_status.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group zynqmp_fpga_attr_group = {
> +	.attrs = zynqmp_fpga_device_attrs,
> +};
> +
>  static const struct fpga_manager_ops zynqmp_fpga_ops = {
>  	.state = zynqmp_fpga_ops_state,
>  	.write_init = zynqmp_fpga_ops_write_init,
> @@ -88,6 +167,7 @@ static int zynqmp_fpga_probe(struct platform_device *pdev)
>  	struct device *dev = &pdev->dev;
>  	struct zynqmp_fpga_priv *priv;
>  	struct fpga_manager *mgr;
> +	int ret;
>  
>  	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>  	if (!priv)
> @@ -95,6 +175,13 @@ static int zynqmp_fpga_probe(struct platform_device *pdev)
>  
>  	priv->dev = dev;
>  
> +	/* Add the device attributes */
> +	ret = sysfs_create_group(&dev->kobj, &zynqmp_fpga_attr_group);

Again, please do fix this as mentioned by Greg:

https://lore.kernel.org/all/Y0fYjyXrMEo6M76k@kroah.com/

Check how other platform drivers are doing.

And this may also be useful:
http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/

Thanks,
Yilun

> +	if (ret) {
> +		dev_err(dev, "Error creating sysfs files\n");
> +		return ret;
> +	}
> +
>  	mgr = devm_fpga_mgr_register(dev, "Xilinx ZynqMP FPGA Manager",
>  				     &zynqmp_fpga_ops, priv);
>  	return PTR_ERR_OR_ZERO(mgr);
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
new file mode 100644
index 000000000000..66c98bb8dfba
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
@@ -0,0 +1,18 @@ 
+What:		/sys/class/fpga_manager/<fpga>/device/status
+Date:		Jan 2023
+KernelVersion:	6.2
+Contact:	Nava kishore Manne <nava.kishore.manne@amd.com>
+Description:	Read fpga status as a string.
+		If FPGA programming operation fails, it could be caused by crc
+		error or incompatible bitstream image. The intent of this
+		interface is to provide more detailed information for FPGA
+		programming errors to userspace. This is a list of strings for
+		the supported status.
+
+		* CRC-Error		- CRC error detected by hardware.
+		* Security-Error	- Security error detected by hardware.
+		* Initialization-Error	- Device Initialization error.
+		* Internal-Signal-Error	- Device internal signal error.
+		* I/Os-High-Z-state	- All I/Os are placed in High-Z state.
+		* Sequence-Error	- Device start-up sequence error.
+		* Firmware-Error	- Firmware error.
diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c
index c60f20949c47..81d3e18527ee 100644
--- a/drivers/fpga/zynqmp-fpga.c
+++ b/drivers/fpga/zynqmp-fpga.c
@@ -15,6 +15,37 @@ 
 /* Constant Definitions */
 #define IXR_FPGA_DONE_MASK	BIT(3)
 
+/* Error Register */
+#define IXR_FPGA_ERR_CRC_ERR		BIT(0)
+#define IXR_FPGA_ERR_SECURITY_ERR	BIT(16)
+
+/* Signal Status Register */
+#define IXR_FPGA_END_OF_STARTUP		BIT(4)
+#define IXR_FPGA_GST_CFG_B		BIT(5)
+#define IXR_FPGA_INIT_B_INTERNAL	BIT(11)
+#define IXR_FPGA_DONE_INTERNAL_SIGNAL	BIT(13)
+
+/* FPGA error status. */
+enum {
+	ZYNQMP_FPGA_STATUS_CRC_ERR,
+	ZYNQMP_FPGA_STATUS_SECURITY_ERR,
+	ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR,
+	ZYNQMP_FPGA_STATUS_SIGNAL_ERR,
+	ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR,
+	ZYNQMP_FPGA_STATUS_EOS_ERR,
+	ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR,
+};
+
+static const char * const zynqmp_fpga_error_statuses[] = {
+	[ZYNQMP_FPGA_STATUS_CRC_ERR] = "CRC-Error",
+	[ZYNQMP_FPGA_STATUS_SECURITY_ERR] = "Security-Error",
+	[ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR] = "Initialization-Error",
+	[ZYNQMP_FPGA_STATUS_SIGNAL_ERR] = "Internal-Signal-Error",
+	[ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR] = "I/Os-High-Z-state",
+	[ZYNQMP_FPGA_STATUS_EOS_ERR] = "Sequence-Error",
+	[ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR] = "Firmware-Error",
+};
+
 /**
  * struct zynqmp_fpga_priv - Private data structure
  * @dev:	Device data structure
@@ -77,6 +108,54 @@  static enum fpga_mgr_states zynqmp_fpga_ops_state(struct fpga_manager *mgr)
 	return FPGA_MGR_STATE_UNKNOWN;
 }
 
+static ssize_t status_show(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	unsigned long status = 0;
+	ssize_t len = 0;
+	u32 reg_val;
+	int ret;
+	u8 i;
+
+	ret = zynqmp_pm_fpga_get_config_status(&reg_val);
+	if (!ret) {
+		if (reg_val & IXR_FPGA_ERR_CRC_ERR)
+			status |= ZYNQMP_FPGA_STATUS_CRC_ERR;
+		if (reg_val & IXR_FPGA_ERR_SECURITY_ERR)
+			status |= ZYNQMP_FPGA_STATUS_SECURITY_ERR;
+		if (!(reg_val & IXR_FPGA_INIT_B_INTERNAL))
+			status |= ZYNQMP_FPGA_STATUS_DEVICE_INIT_ERR;
+		if (!(reg_val & IXR_FPGA_DONE_INTERNAL_SIGNAL))
+			status |= ZYNQMP_FPGA_STATUS_SIGNAL_ERR;
+		if (!(reg_val & IXR_FPGA_GST_CFG_B))
+			status |= ZYNQMP_FPGA_STATUS_HIGH_Z_STATE_ERR;
+		if (!(reg_val & IXR_FPGA_END_OF_STARTUP))
+			status |= ZYNQMP_FPGA_STATUS_EOS_ERR;
+	} else {
+		status = ZYNQMP_FPGA_MGR_STATUS_FIRMWARE_REQ_ERR;
+	}
+
+	for_each_set_bit(i, &status, ARRAY_SIZE(zynqmp_fpga_error_statuses))
+		len += sysfs_emit_at(buf, len, "%s ",
+				     zynqmp_fpga_error_statuses[i]);
+
+	if (len)
+		buf[len - 1] = '\n';
+
+	return len;
+}
+
+static DEVICE_ATTR_RO(status);
+
+static struct attribute *zynqmp_fpga_device_attrs[] = {
+	&dev_attr_status.attr,
+	NULL,
+};
+
+static const struct attribute_group zynqmp_fpga_attr_group = {
+	.attrs = zynqmp_fpga_device_attrs,
+};
+
 static const struct fpga_manager_ops zynqmp_fpga_ops = {
 	.state = zynqmp_fpga_ops_state,
 	.write_init = zynqmp_fpga_ops_write_init,
@@ -88,6 +167,7 @@  static int zynqmp_fpga_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct zynqmp_fpga_priv *priv;
 	struct fpga_manager *mgr;
+	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -95,6 +175,13 @@  static int zynqmp_fpga_probe(struct platform_device *pdev)
 
 	priv->dev = dev;
 
+	/* Add the device attributes */
+	ret = sysfs_create_group(&dev->kobj, &zynqmp_fpga_attr_group);
+	if (ret) {
+		dev_err(dev, "Error creating sysfs files\n");
+		return ret;
+	}
+
 	mgr = devm_fpga_mgr_register(dev, "Xilinx ZynqMP FPGA Manager",
 				     &zynqmp_fpga_ops, priv);
 	return PTR_ERR_OR_ZERO(mgr);