Message ID | e825b50a843ffe40e33f34e4d858c07c1b2ff259.1674499048.git.geert+renesas@glider.be (mailing list archive) |
---|---|
State | Awaiting Upstream |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | can: rcar_canfd: Add support for R-Car V4H systems | expand |
Context | Check | Description |
---|---|---|
netdev/tree_selection | success | Series ignored based on subject, async |
On Mon, Jan 23, 2023 at 7:56 PM Geert Uytterhoeven <geert+renesas@glider.be> wrote: > Add support for CAN transceivers described as PHYs. > > While simple CAN transceivers can do without, this is needed for CAN > transceivers like NXP TJR1443 that need a configuration step (like > pulling standby or enable lines), and/or impose a bitrate limit. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > This depends on "[PATCH 1/7] phy: Add devm_of_phy_optional_get() helper". > https://lore.kernel.org/all/f53a1bcca637ceeafb04ce3540a605532d3bc34a.1674036164.git.geert+renesas@glider.be v2: "[PATCH v2 3/9] phy: Add devm_of_phy_optional_get() helper" https://lore.kernel.org/all/4cd0069bcff424ffc5c3a102397c02370b91985b.1674584626.git.geert+renesas@glider.be I'll keep you updated when/if this ends up on an immutable branch. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
On 24.01.2023 19:41:03, Geert Uytterhoeven wrote: > On Mon, Jan 23, 2023 at 7:56 PM Geert Uytterhoeven > <geert+renesas@glider.be> wrote: > > Add support for CAN transceivers described as PHYs. > > > > While simple CAN transceivers can do without, this is needed for CAN > > transceivers like NXP TJR1443 that need a configuration step (like > > pulling standby or enable lines), and/or impose a bitrate limit. > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > --- > > This depends on "[PATCH 1/7] phy: Add devm_of_phy_optional_get() helper". > > https://lore.kernel.org/all/f53a1bcca637ceeafb04ce3540a605532d3bc34a.1674036164.git.geert+renesas@glider.be > > v2: "[PATCH v2 3/9] phy: Add devm_of_phy_optional_get() helper" > https://lore.kernel.org/all/4cd0069bcff424ffc5c3a102397c02370b91985b.1674584626.git.geert+renesas@glider.be > > I'll keep you updated when/if this ends up on an immutable branch. Should I take the patches 1...11 for can-next/main? regards, Marc
Hi Marc, On Thu, Feb 2, 2023 at 3:40 PM Marc Kleine-Budde <mkl@pengutronix.de> wrote: > On 24.01.2023 19:41:03, Geert Uytterhoeven wrote: > > On Mon, Jan 23, 2023 at 7:56 PM Geert Uytterhoeven > > <geert+renesas@glider.be> wrote: > > > Add support for CAN transceivers described as PHYs. > > > > > > While simple CAN transceivers can do without, this is needed for CAN > > > transceivers like NXP TJR1443 that need a configuration step (like > > > pulling standby or enable lines), and/or impose a bitrate limit. > > > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > --- > > > This depends on "[PATCH 1/7] phy: Add devm_of_phy_optional_get() helper". > > > https://lore.kernel.org/all/f53a1bcca637ceeafb04ce3540a605532d3bc34a.1674036164.git.geert+renesas@glider.be > > > > v2: "[PATCH v2 3/9] phy: Add devm_of_phy_optional_get() helper" > > https://lore.kernel.org/all/4cd0069bcff424ffc5c3a102397c02370b91985b.1674584626.git.geert+renesas@glider.be > > > > I'll keep you updated when/if this ends up on an immutable branch. > > Should I take the patches 1...11 for can-next/main? That would be great, thanks! I had hoped Vinod would have applied the dependency, and provided an immutable branch, as originally planned. Alternatively, I can send a v2 of 12/12 that does not rely on the new helper, and convert it later. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
On 02.02.2023 15:53:08, Geert Uytterhoeven wrote: > > > > This depends on "[PATCH 1/7] phy: Add devm_of_phy_optional_get() helper". > > > > https://lore.kernel.org/all/f53a1bcca637ceeafb04ce3540a605532d3bc34a.1674036164.git.geert+renesas@glider.be > > > > > > v2: "[PATCH v2 3/9] phy: Add devm_of_phy_optional_get() helper" > > > https://lore.kernel.org/all/4cd0069bcff424ffc5c3a102397c02370b91985b.1674584626.git.geert+renesas@glider.be > > > > > > I'll keep you updated when/if this ends up on an immutable branch. > > > > Should I take the patches 1...11 for can-next/main? > > That would be great, thanks! Done. Marc
Hi Marc, On Thu, Feb 2, 2023 at 4:06 PM Marc Kleine-Budde <mkl@pengutronix.de> wrote: > On 02.02.2023 15:53:08, Geert Uytterhoeven wrote: > > > > > This depends on "[PATCH 1/7] phy: Add devm_of_phy_optional_get() helper". > > > > > https://lore.kernel.org/all/f53a1bcca637ceeafb04ce3540a605532d3bc34a.1674036164.git.geert+renesas@glider.be > > > > > > > > v2: "[PATCH v2 3/9] phy: Add devm_of_phy_optional_get() helper" > > > > https://lore.kernel.org/all/4cd0069bcff424ffc5c3a102397c02370b91985b.1674584626.git.geert+renesas@glider.be > > > > > > > > I'll keep you updated when/if this ends up on an immutable branch. > > > > > > Should I take the patches 1...11 for can-next/main? > > > > That would be great, thanks! > > Done. Thank you! Meanwhile, the dependency for 12/12 is now available as an immutable branch, cfr. https://lore.kernel.org/all/Y9za4a8qyapi4CWD@matsya Thanks again! Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
On 03.02.2023 11:24:08, Geert Uytterhoeven wrote: > > > > > I'll keep you updated when/if this ends up on an immutable branch. > > > > > > > > Should I take the patches 1...11 for can-next/main? > > > > > > That would be great, thanks! > > > > Done. > > Thank you! > Meanwhile, the dependency for 12/12 is now available as an immutable > branch, cfr. https://lore.kernel.org/all/Y9za4a8qyapi4CWD@matsya net-next/main is at v6.2-rc6, but does not include this series. I assume it will be mainlined in the v6.3 merge window. I think you can resend this patch against can/main once v6.3-rc1 is released. Marc
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c index ef4e1b9a9e1ee280..6df9a259e5e4f92c 100644 --- a/drivers/net/can/rcar/rcar_canfd.c +++ b/drivers/net/can/rcar/rcar_canfd.c @@ -35,6 +35,7 @@ #include <linux/netdevice.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/reset.h> #include <linux/types.h> @@ -530,6 +531,7 @@ struct rcar_canfd_channel { struct net_device *ndev; struct rcar_canfd_global *gpriv; /* Controller reference */ void __iomem *base; /* Register base address */ + struct phy *transceiver; /* Optional transceiver */ struct napi_struct napi; u32 tx_head; /* Incremented on xmit */ u32 tx_tail; /* Incremented on xmit done */ @@ -1413,11 +1415,17 @@ static int rcar_canfd_open(struct net_device *ndev) struct rcar_canfd_global *gpriv = priv->gpriv; int err; + err = phy_power_on(priv->transceiver); + if (err) { + netdev_err(ndev, "failed to power on PHY, error %d\n", err); + return err; + } + /* Peripheral clock is already enabled in probe */ err = clk_prepare_enable(gpriv->can_clk); if (err) { netdev_err(ndev, "failed to enable CAN clock, error %d\n", err); - goto out_clock; + goto out_phy; } err = open_candev(ndev); @@ -1437,7 +1445,8 @@ static int rcar_canfd_open(struct net_device *ndev) close_candev(ndev); out_can_clock: clk_disable_unprepare(gpriv->can_clk); -out_clock: +out_phy: + phy_power_off(priv->transceiver); return err; } @@ -1480,6 +1489,7 @@ static int rcar_canfd_close(struct net_device *ndev) napi_disable(&priv->napi); clk_disable_unprepare(gpriv->can_clk); close_candev(ndev); + phy_power_off(priv->transceiver); return 0; } @@ -1711,7 +1721,7 @@ static const struct ethtool_ops rcar_canfd_ethtool_ops = { }; static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch, - u32 fcan_freq) + u32 fcan_freq, struct phy *transceiver) { const struct rcar_canfd_hw_info *info = gpriv->info; struct platform_device *pdev = gpriv->pdev; @@ -1732,8 +1742,11 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch, ndev->flags |= IFF_ECHO; priv->ndev = ndev; priv->base = gpriv->base; + priv->transceiver = transceiver; priv->channel = ch; priv->gpriv = gpriv; + if (transceiver) + priv->can.bitrate_max = transceiver->attrs.max_link_rate; priv->can.clock.freq = fcan_freq; dev_info(dev, "can_clk rate is %u\n", priv->can.clock.freq); @@ -1836,6 +1849,7 @@ static void rcar_canfd_channel_remove(struct rcar_canfd_global *gpriv, u32 ch) static int rcar_canfd_probe(struct platform_device *pdev) { + struct phy *transceivers[RCANFD_NUM_CHANNELS] = { 0, }; const struct rcar_canfd_hw_info *info; struct device *dev = &pdev->dev; void __iomem *addr; @@ -1857,9 +1871,14 @@ static int rcar_canfd_probe(struct platform_device *pdev) for (i = 0; i < info->max_channels; ++i) { name[7] = '0' + i; of_child = of_get_child_by_name(dev->of_node, name); - if (of_child && of_device_is_available(of_child)) + if (of_child && of_device_is_available(of_child)) { channels_mask |= BIT(i); + transceivers[i] = devm_of_phy_optional_get(dev, + of_child, NULL); + } of_node_put(of_child); + if (IS_ERR(transceivers[i])) + return PTR_ERR(transceivers[i]); } if (info->shared_global_irqs) { @@ -2035,7 +2054,8 @@ static int rcar_canfd_probe(struct platform_device *pdev) } for_each_set_bit(ch, &gpriv->channels_mask, info->max_channels) { - err = rcar_canfd_channel_probe(gpriv, ch, fcan_freq); + err = rcar_canfd_channel_probe(gpriv, ch, fcan_freq, + transceivers[ch]); if (err) goto fail_channel; }
Add support for CAN transceivers described as PHYs. While simple CAN transceivers can do without, this is needed for CAN transceivers like NXP TJR1443 that need a configuration step (like pulling standby or enable lines), and/or impose a bitrate limit. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- This depends on "[PATCH 1/7] phy: Add devm_of_phy_optional_get() helper". https://lore.kernel.org/all/f53a1bcca637ceeafb04ce3540a605532d3bc34a.1674036164.git.geert+renesas@glider.be --- drivers/net/can/rcar/rcar_canfd.c | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-)