Message ID | 20230207230436.2690891-7-usama.arif@bytedance.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Parallel CPU bringup for x86_64 | expand |
On Tue, Feb 7, 2023 at 6:10 PM Usama Arif <usama.arif@bytedance.com> wrote: > > From: Thomas Gleixner <tglx@linutronix.de> > > Rework the real-mode startup code to allow for APs to be brought up in > parallel. This is in two parts: > > 1. Introduce a bit-spinlock to prevent them from all using the real > mode stack at the same time. > > 2. Avoid the use of global variables for passing per-CPU information to > the APs. > > To achieve the latter, export the cpuid_to_apicid[] array so that each > AP can find its own per_cpu data (and thus initial_gs, initial_stack and > early_gdt_descr) by searching therein based on its APIC ID. > > Introduce a global variable 'smpboot_control' indicating to the AP how > it should find its APIC ID. For a serialized bringup, the APIC ID is > explicitly passed in the low bits of smpboot_control, while for parallel > mode there are flags directing the AP to find its APIC ID in CPUID leaf > 0x0b (for X2APIC mode) or CPUID leaf 0x01 where 8 bits are sufficient. For the serialized bringup case, it would be simpler to just put the cpu number in the lower bits instead of the APIC id, skipping the lookup. -- Brian Gerst
On 08/02/2023 05:09, Brian Gerst wrote: > On Tue, Feb 7, 2023 at 6:10 PM Usama Arif <usama.arif@bytedance.com> wrote: >> >> From: Thomas Gleixner <tglx@linutronix.de> >> >> Rework the real-mode startup code to allow for APs to be brought up in >> parallel. This is in two parts: >> >> 1. Introduce a bit-spinlock to prevent them from all using the real >> mode stack at the same time. >> >> 2. Avoid the use of global variables for passing per-CPU information to >> the APs. >> >> To achieve the latter, export the cpuid_to_apicid[] array so that each >> AP can find its own per_cpu data (and thus initial_gs, initial_stack and >> early_gdt_descr) by searching therein based on its APIC ID. >> >> Introduce a global variable 'smpboot_control' indicating to the AP how >> it should find its APIC ID. For a serialized bringup, the APIC ID is >> explicitly passed in the low bits of smpboot_control, while for parallel >> mode there are flags directing the AP to find its APIC ID in CPUID leaf >> 0x0b (for X2APIC mode) or CPUID leaf 0x01 where 8 bits are sufficient. > > For the serialized bringup case, it would be simpler to just put the > cpu number in the lower bits instead of the APIC id, skipping the > lookup. > > -- > Brian Gerst I guess we could do something like below, it would save a few loops through find_cpunr in serial case, but probably is as simple as just using setup_AP and find_cpunr for all cases? Happy with either but if there is a strong preference for below, can change in next revision? diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 656e6018b9d4..30aa543a0114 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -265,7 +265,10 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) testl $STARTUP_APICID_CPUID_01, %edx jnz .Luse_cpuid_01 andl $0x0FFFFFFF, %edx - jmp .Lsetup_AP + mov $8, %eax + mul %edx + movq %rax, %rcx + jmp .Linit_cpu_data .Luse_cpuid_01: mov $0x01, %eax diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 8ffec5de2e2e..73dd87bf2f29 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1141,7 +1141,7 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle, early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu); initial_stack = idle->thread.sp; } else if (!do_parallel_bringup) { - smpboot_control = STARTUP_SECONDARY | apicid; + smpboot_control = STARTUP_SECONDARY | cpu; } /* Enable the espfix hack for this CPU */
On Wed, 2023-02-08 at 00:09 -0500, Brian Gerst wrote: > On Tue, Feb 7, 2023 at 6:10 PM Usama Arif <usama.arif@bytedance.com> wrote: > > > > From: Thomas Gleixner <tglx@linutronix.de> > > > > Rework the real-mode startup code to allow for APs to be brought up in > > parallel. This is in two parts: > > > > 1. Introduce a bit-spinlock to prevent them from all using the real > > mode stack at the same time. > > > > 2. Avoid the use of global variables for passing per-CPU information to > > the APs. > > > > To achieve the latter, export the cpuid_to_apicid[] array so that each > > AP can find its own per_cpu data (and thus initial_gs, initial_stack and > > early_gdt_descr) by searching therein based on its APIC ID. > > > > Introduce a global variable 'smpboot_control' indicating to the AP how > > it should find its APIC ID. For a serialized bringup, the APIC ID is > > explicitly passed in the low bits of smpboot_control, while for parallel > > mode there are flags directing the AP to find its APIC ID in CPUID leaf > > 0x0b (for X2APIC mode) or CPUID leaf 0x01 where 8 bits are sufficient. > > For the serialized bringup case, it would be simpler to just put the > cpu number in the lower bits instead of the APIC id, skipping the > lookup. > I seem to recall that was one of my first thoughts on seeing this patch. I quite liked the fact that the code path in head_64.S remained basically the same for all cases, and was actually testing the lookup via cpuid_to_apicid[] even when parallel boot isn't available. But then again, we've tested that part fairly well now, so perhaps you're right and we could do something like the below? It doesn't actually add much more complexity; just define the entry conditions to .Linit_cpu_data a bit more clearly and remember how to use scaled index addressing so we don't have to explicitly multiply by 8. I don't know that I care very much either way. It's Thomas's patch originally, so I'll let him see if he can muster up an opinion. diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 656e6018b9d4..d878869472a2 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -252,20 +252,23 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) jz .Lsetup_cpu /* - * Secondary CPUs find out the offsets via the APIC ID. For parallel - * boot the APIC ID is retrieved from CPUID, otherwise it's encoded - * in smpboot_control: + * Secondary CPUs find out the offsets via their per_cpu data. For + * parallel bringup they find it via the cpuid_to_apicid[] array + * with their APIC ID obtained from CPUID. Otherwise the CPU number + * is encoded directly in smpboot_control: + * * Bit 31 STARTUP_SECONDARY flag (checked above) * Bit 30 STARTUP_APICID_CPUID_0B flag (use CPUID 0x0b) * Bit 29 STARTUP_APICID_CPUID_01 flag (use CPUID 0x01) - * Bit 0-24 APIC ID if STARTUP_APICID_CPUID_xx flags are not set + * Bit 0-24 CPU# if STARTUP_APICID_CPUID_xx flags are not set */ testl $STARTUP_APICID_CPUID_0B, %edx jnz .Luse_cpuid_0b testl $STARTUP_APICID_CPUID_01, %edx jnz .Luse_cpuid_01 andl $0x0FFFFFFF, %edx - jmp .Lsetup_AP + mov %edx, %ecx + jmp .Linit_cpu_data .Luse_cpuid_01: mov $0x01, %eax @@ -288,14 +291,14 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) cmpl (%rbx), %edx jz .Linit_cpu_data addq $4, %rbx - addq $8, %rcx + inc %rcx jmp .Lfind_cpunr .Linit_cpu_data: + /* ECX contains the CPU# of the current CPU */ /* Get the per cpu offset */ leaq __per_cpu_offset(%rip), %rbx - addq %rcx, %rbx - movq (%rbx), %rbx + movq (%rbx,%rcx,8), %rbx /* Save it for GS BASE setup */ movq %rbx, initial_gs(%rip) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index cae916040c55..5149676881e0 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1146,7 +1146,7 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle, early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu); initial_stack = idle->thread.sp; } else if (!do_parallel_bringup) { - smpboot_control = STARTUP_SECONDARY | apicid; + smpboot_control = STARTUP_SECONDARY | cpu; } /* Enable the espfix hack for this CPU */
On Wed, Feb 08 2023 at 00:09, Brian Gerst wrote: > On Tue, Feb 7, 2023 at 6:10 PM Usama Arif <usama.arif@bytedance.com> wrote: >> Introduce a global variable 'smpboot_control' indicating to the AP how >> it should find its APIC ID. For a serialized bringup, the APIC ID is >> explicitly passed in the low bits of smpboot_control, while for parallel >> mode there are flags directing the AP to find its APIC ID in CPUID leaf >> 0x0b (for X2APIC mode) or CPUID leaf 0x01 where 8 bits are sufficient. > > For the serialized bringup case, it would be simpler to just put the > cpu number in the lower bits instead of the APIC id, skipping the > lookup. Yes and no. It can be done, but I rather prefer the consistency of the data and the mechanism. The "overhead" or "win" is not even measurable. Thanks, tglx
On Wed, 2023-02-08 at 14:13 +0100, Thomas Gleixner wrote: > On Wed, Feb 08 2023 at 00:09, Brian Gerst wrote: > > On Tue, Feb 7, 2023 at 6:10 PM Usama Arif <usama.arif@bytedance.com> wrote: > > > Introduce a global variable 'smpboot_control' indicating to the AP how > > > it should find its APIC ID. For a serialized bringup, the APIC ID is > > > explicitly passed in the low bits of smpboot_control, while for parallel > > > mode there are flags directing the AP to find its APIC ID in CPUID leaf > > > 0x0b (for X2APIC mode) or CPUID leaf 0x01 where 8 bits are sufficient. > > > > For the serialized bringup case, it would be simpler to just put the > > cpu number in the lower bits instead of the APIC id, skipping the > > lookup. > > Yes and no. It can be done, but I rather prefer the consistency of the > data and the mechanism. The "overhead" or "win" is not even measurable. Yeah. I might do this much though, just to track CPU# simply in %ecx: --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -285,17 +285,15 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) leaq cpuid_to_apicid(%rip), %rbx .Lfind_cpunr: - cmpl (%rbx), %edx + cmpl (%rbx,%rcx,4), %edx jz .Linit_cpu_data - addq $4, %rbx - addq $8, %rcx + inc %rcx jmp .Lfind_cpunr .Linit_cpu_data: - /* Get the per cpu offset */ + /* Get the per cpu offset for the given CPU# which is in ECX */ leaq __per_cpu_offset(%rip), %rbx - addq %rcx, %rbx - movq (%rbx), %rbx + movq (%rbx,%rcx,8), %rbx /* Save it for GS BASE setup */ movq %rbx, initial_gs(%rip)
diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h index a336feef0af1..f0357cfe2fb0 100644 --- a/arch/x86/include/asm/realmode.h +++ b/arch/x86/include/asm/realmode.h @@ -52,6 +52,7 @@ struct trampoline_header { u64 efer; u32 cr4; u32 flags; + u32 lock; #endif }; @@ -65,6 +66,8 @@ extern unsigned long initial_stack; extern unsigned long initial_vc_handler; #endif +extern u32 *trampoline_lock; + extern unsigned char real_mode_blob[]; extern unsigned char real_mode_relocs[]; diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index b4dbb20dab1a..33c0d5fd8af6 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -199,5 +199,13 @@ extern void nmi_selftest(void); #define nmi_selftest() do { } while (0) #endif -#endif /* __ASSEMBLY__ */ +extern unsigned int smpboot_control; + +#endif /* !__ASSEMBLY__ */ + +/* Control bits for startup_64 */ +#define STARTUP_SECONDARY 0x80000000 +#define STARTUP_APICID_CPUID_0B 0x40000000 +#define STARTUP_APICID_CPUID_01 0x20000000 + #endif /* _ASM_X86_SMP_H */ diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 3b7f4cdbf2e0..06adf340a0f1 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -115,6 +115,7 @@ int x86_acpi_suspend_lowlevel(void) early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(smp_processor_id()); initial_gs = per_cpu_offset(smp_processor_id()); + smpboot_control = 0; #endif initial_code = (unsigned long)wakeup_long64; saved_magic = 0x123456789abcdef0L; diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 20d9a604da7c..ac1d7e5da1f2 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2377,7 +2377,7 @@ static int nr_logical_cpuids = 1; /* * Used to store mapping between logical CPU IDs and APIC IDs. */ -static int cpuid_to_apicid[] = { +int cpuid_to_apicid[] = { [0 ... NR_CPUS - 1] = -1, }; diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 222efd4a09bc..656e6018b9d4 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -25,6 +25,7 @@ #include <asm/export.h> #include <asm/nospec-branch.h> #include <asm/fixmap.h> +#include <asm/smp.h> /* * We are not able to switch in one step to the final KERNEL ADDRESS SPACE @@ -241,6 +242,77 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) UNWIND_HINT_EMPTY ANNOTATE_NOENDBR // above +#ifdef CONFIG_SMP + /* + * Is this the boot CPU coming up? If so everything is available + * in initial_gs, initial_stack and early_gdt_descr. + */ + movl smpboot_control(%rip), %edx + testl $STARTUP_SECONDARY, %edx + jz .Lsetup_cpu + + /* + * Secondary CPUs find out the offsets via the APIC ID. For parallel + * boot the APIC ID is retrieved from CPUID, otherwise it's encoded + * in smpboot_control: + * Bit 31 STARTUP_SECONDARY flag (checked above) + * Bit 30 STARTUP_APICID_CPUID_0B flag (use CPUID 0x0b) + * Bit 29 STARTUP_APICID_CPUID_01 flag (use CPUID 0x01) + * Bit 0-24 APIC ID if STARTUP_APICID_CPUID_xx flags are not set + */ + testl $STARTUP_APICID_CPUID_0B, %edx + jnz .Luse_cpuid_0b + testl $STARTUP_APICID_CPUID_01, %edx + jnz .Luse_cpuid_01 + andl $0x0FFFFFFF, %edx + jmp .Lsetup_AP + +.Luse_cpuid_01: + mov $0x01, %eax + cpuid + mov %ebx, %edx + shr $24, %edx + jmp .Lsetup_AP + +.Luse_cpuid_0b: + mov $0x0B, %eax + xorl %ecx, %ecx + cpuid + +.Lsetup_AP: + /* EDX contains the APICID of the current CPU */ + xorl %ecx, %ecx + leaq cpuid_to_apicid(%rip), %rbx + +.Lfind_cpunr: + cmpl (%rbx), %edx + jz .Linit_cpu_data + addq $4, %rbx + addq $8, %rcx + jmp .Lfind_cpunr + +.Linit_cpu_data: + /* Get the per cpu offset */ + leaq __per_cpu_offset(%rip), %rbx + addq %rcx, %rbx + movq (%rbx), %rbx + /* Save it for GS BASE setup */ + movq %rbx, initial_gs(%rip) + + /* Calculate the GDT address */ + movq $gdt_page, %rcx + addq %rbx, %rcx + movq %rcx, early_gdt_descr_base(%rip) + + /* Find the idle task stack */ + movq $idle_threads, %rcx + addq %rbx, %rcx + movq (%rcx), %rcx + movq TASK_threadsp(%rcx), %rcx + movq %rcx, initial_stack(%rip) +#endif /* CONFIG_SMP */ + +.Lsetup_cpu: /* * We must switch to a new descriptor in kernel space for the GDT * because soon the kernel won't have access anymore to the userspace @@ -281,6 +353,14 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) */ movq initial_stack(%rip), %rsp + /* Drop the realmode protection. For the boot CPU the pointer is NULL! */ + movq trampoline_lock(%rip), %rax + testq %rax, %rax + jz .Lsetup_idt + lock + btrl $0, (%rax) + +.Lsetup_idt: /* Setup and Load IDT */ pushq %rsi call early_setup_idt @@ -426,6 +506,7 @@ SYM_DATA(initial_vc_handler, .quad handle_vc_boot_ghcb) * reliably detect the end of the stack. */ SYM_DATA(initial_stack, .quad init_thread_union + THREAD_SIZE - FRAME_SIZE) +SYM_DATA(trampoline_lock, .quad 0); __FINITDATA __INIT @@ -660,6 +741,9 @@ SYM_DATA_END(level1_fixmap_pgt) SYM_DATA(early_gdt_descr, .word GDT_ENTRIES*8-1) SYM_DATA_LOCAL(early_gdt_descr_base, .quad INIT_PER_CPU_VAR(gdt_page)) + .align 16 +SYM_DATA(smpboot_control, .long 0) + .align 16 /* This must match the first entry in level2_kernel_pgt */ SYM_DATA(phys_base, .quad 0x0) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index eee717086ab7..7abdf347493f 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -798,6 +798,16 @@ static int __init cpu_init_udelay(char *str) } early_param("cpu_init_udelay", cpu_init_udelay); +static bool do_parallel_bringup = true; + +static int __init no_parallel_bringup(char *str) +{ + do_parallel_bringup = false; + + return 0; +} +early_param("no_parallel_bringup", no_parallel_bringup); + static void __init smp_quirk_init_udelay(void) { /* if cmdline changed it from default, leave it alone */ @@ -1085,8 +1095,6 @@ int common_cpu_up(unsigned int cpu, struct task_struct *idle) #ifdef CONFIG_X86_32 /* Stack for startup_32 can be just as for start_secondary onwards */ per_cpu(pcpu_hot.top_of_stack, cpu) = task_top_of_stack(idle); -#else - initial_gs = per_cpu_offset(cpu); #endif return 0; } @@ -1111,9 +1119,14 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle, start_ip = real_mode_header->trampoline_start64; #endif idle->thread.sp = (unsigned long)task_pt_regs(idle); - early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu); initial_code = (unsigned long)start_secondary; - initial_stack = idle->thread.sp; + + if (IS_ENABLED(CONFIG_X86_32)) { + early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu); + initial_stack = idle->thread.sp; + } else if (!do_parallel_bringup) { + smpboot_control = STARTUP_SECONDARY | apicid; + } /* Enable the espfix hack for this CPU */ init_espfix_ap(cpu); @@ -1513,6 +1526,45 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) speculative_store_bypass_ht_init(); + /* + * We can do 64-bit AP bringup in parallel if the CPU reports + * its APIC ID in CPUID (either leaf 0x0B if we need the full + * APIC ID in X2APIC mode, or leaf 0x01 if 8 bits are + * sufficient). Otherwise it's too hard. And not for SEV-ES + * guests because they can't use CPUID that early. + */ + if (IS_ENABLED(CONFIG_X86_32) || boot_cpu_data.cpuid_level < 1 || + (x2apic_mode && boot_cpu_data.cpuid_level < 0xb) || + cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT)) + do_parallel_bringup = false; + + if (do_parallel_bringup && x2apic_mode) { + unsigned int eax, ebx, ecx, edx; + + /* + * To support parallel bringup in x2apic mode, the AP will need + * to obtain its APIC ID from CPUID 0x0B, since CPUID 0x01 has + * only 8 bits. Check that it is present and seems correct. + */ + cpuid_count(0xb, 0, &eax, &ebx, &ecx, &edx); + + /* + * AMD says that if executed with an umimplemented level in + * ECX, then it will return all zeroes in EAX. Intel says it + * will return zeroes in both EAX and EBX. Checking only EAX + * should be sufficient. + */ + if (eax) { + smpboot_control = STARTUP_SECONDARY | STARTUP_APICID_CPUID_0B; + } else { + pr_info("Disabling parallel bringup because CPUID 0xb looks untrustworthy\n"); + do_parallel_bringup = false; + } + } else if (do_parallel_bringup) { + /* Without X2APIC, what's in CPUID 0x01 should suffice. */ + smpboot_control = STARTUP_SECONDARY | STARTUP_APICID_CPUID_01; + } + snp_set_wakeup_secondary_cpu(); } diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c index af565816d2ba..788e5559549f 100644 --- a/arch/x86/realmode/init.c +++ b/arch/x86/realmode/init.c @@ -154,6 +154,9 @@ static void __init setup_real_mode(void) trampoline_header->flags = 0; + trampoline_lock = &trampoline_header->lock; + *trampoline_lock = 0; + trampoline_pgd = (u64 *) __va(real_mode_header->trampoline_pgd); /* Map the real mode stub as virtual == physical */ diff --git a/arch/x86/realmode/rm/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S index e38d61d6562e..49ebc1636ffd 100644 --- a/arch/x86/realmode/rm/trampoline_64.S +++ b/arch/x86/realmode/rm/trampoline_64.S @@ -49,6 +49,19 @@ SYM_CODE_START(trampoline_start) mov %ax, %es mov %ax, %ss + /* + * Make sure only one CPU fiddles with the realmode stack + */ +.Llock_rm: + btl $0, tr_lock + jnc 2f + pause + jmp .Llock_rm +2: + lock + btsl $0, tr_lock + jc .Llock_rm + # Setup stack movl $rm_stack_end, %esp @@ -241,6 +254,7 @@ SYM_DATA_START(trampoline_header) SYM_DATA(tr_efer, .space 8) SYM_DATA(tr_cr4, .space 4) SYM_DATA(tr_flags, .space 4) + SYM_DATA(tr_lock, .space 4) SYM_DATA_END(trampoline_header) #include "trampoline_common.S" diff --git a/kernel/smpboot.c b/kernel/smpboot.c index 2c7396da470c..a18a21dff9bc 100644 --- a/kernel/smpboot.c +++ b/kernel/smpboot.c @@ -25,7 +25,7 @@ * For the hotplug case we keep the task structs around and reuse * them. */ -static DEFINE_PER_CPU(struct task_struct *, idle_threads); +DEFINE_PER_CPU(struct task_struct *, idle_threads); struct task_struct *idle_thread_get(unsigned int cpu) {