diff mbox series

[v7,6/9] x86/smpboot: Support parallel startup of secondary CPUs

Message ID 20230207230436.2690891-7-usama.arif@bytedance.com (mailing list archive)
State Superseded
Headers show
Series Parallel CPU bringup for x86_64 | expand

Commit Message

Usama Arif Feb. 7, 2023, 11:04 p.m. UTC
From: Thomas Gleixner <tglx@linutronix.de>

Rework the real-mode startup code to allow for APs to be brought up in
parallel. This is in two parts:

1. Introduce a bit-spinlock to prevent them from all using the real
   mode stack at the same time.

2. Avoid the use of global variables for passing per-CPU information to
   the APs.

To achieve the latter, export the cpuid_to_apicid[] array so that each
AP can find its own per_cpu data (and thus initial_gs, initial_stack and
early_gdt_descr) by searching therein based on its APIC ID.

Introduce a global variable 'smpboot_control' indicating to the AP how
it should find its APIC ID. For a serialized bringup, the APIC ID is
explicitly passed in the low bits of smpboot_control, while for parallel
mode there are flags directing the AP to find its APIC ID in CPUID leaf
0x0b (for X2APIC mode) or CPUID leaf 0x01 where 8 bits are sufficient.

Parallel startup may be disabled by a command line option, and also if:
 • AMD SEV-ES is in use, since the AP may not use CPUID that early.
 • X2APIC is enabled, but CPUID leaf 0xb is not present and correect.
 • X2APIC is not enabled but not even CPUID leaf 0x01 exists.

Aside from the fact that APs will now look up their per-cpu data via the
newly-exported cpuid_to_apicid[] table, there is no behavioural change
intended yet, since new parallel CPUHP states have not — yet — been added.

[ dwmw2: Minor tweaks, write a commit message, add CPUID 0x01 support ]
[ seanc: Fix stray override of initial_gs in common_cpu_up() ]
Not-signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
---
 arch/x86/include/asm/realmode.h      |  3 +
 arch/x86/include/asm/smp.h           | 10 +++-
 arch/x86/kernel/acpi/sleep.c         |  1 +
 arch/x86/kernel/apic/apic.c          |  2 +-
 arch/x86/kernel/head_64.S            | 84 ++++++++++++++++++++++++++++
 arch/x86/kernel/smpboot.c            | 60 ++++++++++++++++++--
 arch/x86/realmode/init.c             |  3 +
 arch/x86/realmode/rm/trampoline_64.S | 14 +++++
 kernel/smpboot.c                     |  2 +-
 9 files changed, 172 insertions(+), 7 deletions(-)

Comments

Brian Gerst Feb. 8, 2023, 5:09 a.m. UTC | #1
On Tue, Feb 7, 2023 at 6:10 PM Usama Arif <usama.arif@bytedance.com> wrote:
>
> From: Thomas Gleixner <tglx@linutronix.de>
>
> Rework the real-mode startup code to allow for APs to be brought up in
> parallel. This is in two parts:
>
> 1. Introduce a bit-spinlock to prevent them from all using the real
>    mode stack at the same time.
>
> 2. Avoid the use of global variables for passing per-CPU information to
>    the APs.
>
> To achieve the latter, export the cpuid_to_apicid[] array so that each
> AP can find its own per_cpu data (and thus initial_gs, initial_stack and
> early_gdt_descr) by searching therein based on its APIC ID.
>
> Introduce a global variable 'smpboot_control' indicating to the AP how
> it should find its APIC ID. For a serialized bringup, the APIC ID is
> explicitly passed in the low bits of smpboot_control, while for parallel
> mode there are flags directing the AP to find its APIC ID in CPUID leaf
> 0x0b (for X2APIC mode) or CPUID leaf 0x01 where 8 bits are sufficient.

For the serialized bringup case, it would be simpler to just put the
cpu number in the lower bits instead of the APIC id, skipping the
lookup.

--
Brian Gerst
Usama Arif Feb. 8, 2023, 12:54 p.m. UTC | #2
On 08/02/2023 05:09, Brian Gerst wrote:
> On Tue, Feb 7, 2023 at 6:10 PM Usama Arif <usama.arif@bytedance.com> wrote:
>>
>> From: Thomas Gleixner <tglx@linutronix.de>
>>
>> Rework the real-mode startup code to allow for APs to be brought up in
>> parallel. This is in two parts:
>>
>> 1. Introduce a bit-spinlock to prevent them from all using the real
>>     mode stack at the same time.
>>
>> 2. Avoid the use of global variables for passing per-CPU information to
>>     the APs.
>>
>> To achieve the latter, export the cpuid_to_apicid[] array so that each
>> AP can find its own per_cpu data (and thus initial_gs, initial_stack and
>> early_gdt_descr) by searching therein based on its APIC ID.
>>
>> Introduce a global variable 'smpboot_control' indicating to the AP how
>> it should find its APIC ID. For a serialized bringup, the APIC ID is
>> explicitly passed in the low bits of smpboot_control, while for parallel
>> mode there are flags directing the AP to find its APIC ID in CPUID leaf
>> 0x0b (for X2APIC mode) or CPUID leaf 0x01 where 8 bits are sufficient.
> 
> For the serialized bringup case, it would be simpler to just put the
> cpu number in the lower bits instead of the APIC id, skipping the
> lookup.
> 
> --
> Brian Gerst

I guess we could do something like below, it would save a few loops 
through find_cpunr in serial case, but probably is as simple as just 
using setup_AP and find_cpunr for all cases? Happy with either but if 
there is a strong preference for below, can change in next revision?

diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 656e6018b9d4..30aa543a0114 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -265,7 +265,10 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, 
SYM_L_GLOBAL)
         testl   $STARTUP_APICID_CPUID_01, %edx
         jnz     .Luse_cpuid_01
         andl    $0x0FFFFFFF, %edx
-       jmp     .Lsetup_AP
+       mov     $8, %eax
+       mul     %edx
+       movq    %rax, %rcx
+       jmp     .Linit_cpu_data

  .Luse_cpuid_01:
         mov     $0x01, %eax
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 8ffec5de2e2e..73dd87bf2f29 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1141,7 +1141,7 @@ static int do_boot_cpu(int apicid, int cpu, struct 
task_struct *idle,
                 early_gdt_descr.address = (unsigned 
long)get_cpu_gdt_rw(cpu);
                 initial_stack  = idle->thread.sp;
         } else if (!do_parallel_bringup) {
-               smpboot_control = STARTUP_SECONDARY | apicid;
+               smpboot_control = STARTUP_SECONDARY | cpu;
         }

         /* Enable the espfix hack for this CPU */
David Woodhouse Feb. 8, 2023, 12:56 p.m. UTC | #3
On Wed, 2023-02-08 at 00:09 -0500, Brian Gerst wrote:
> On Tue, Feb 7, 2023 at 6:10 PM Usama Arif <usama.arif@bytedance.com> wrote:
> > 
> > From: Thomas Gleixner <tglx@linutronix.de>
> > 
> > Rework the real-mode startup code to allow for APs to be brought up in
> > parallel. This is in two parts:
> > 
> > 1. Introduce a bit-spinlock to prevent them from all using the real
> >    mode stack at the same time.
> > 
> > 2. Avoid the use of global variables for passing per-CPU information to
> >    the APs.
> > 
> > To achieve the latter, export the cpuid_to_apicid[] array so that each
> > AP can find its own per_cpu data (and thus initial_gs, initial_stack and
> > early_gdt_descr) by searching therein based on its APIC ID.
> > 
> > Introduce a global variable 'smpboot_control' indicating to the AP how
> > it should find its APIC ID. For a serialized bringup, the APIC ID is
> > explicitly passed in the low bits of smpboot_control, while for parallel
> > mode there are flags directing the AP to find its APIC ID in CPUID leaf
> > 0x0b (for X2APIC mode) or CPUID leaf 0x01 where 8 bits are sufficient.
> 
> For the serialized bringup case, it would be simpler to just put the
> cpu number in the lower bits instead of the APIC id, skipping the
> lookup.
> 

I seem to recall that was one of my first thoughts on seeing this
patch.

I quite liked the fact that the code path in head_64.S remained
basically the same for all cases, and was actually testing the lookup
via cpuid_to_apicid[] even when parallel boot isn't available.

But then again, we've tested that part fairly well now, so perhaps
you're right and we could do something like the below? It doesn't
actually add much more complexity; just define the entry conditions to
.Linit_cpu_data a bit more clearly and remember how to use scaled index
addressing so we don't have to explicitly multiply by 8.

I don't know that I care very much either way. It's Thomas's patch
originally, so I'll let him see if he can muster up an opinion.

diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 656e6018b9d4..d878869472a2 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -252,20 +252,23 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 	jz	.Lsetup_cpu
 
 	/*
-	 * Secondary CPUs find out the offsets via the APIC ID. For parallel
-	 * boot the APIC ID is retrieved from CPUID, otherwise it's encoded
-	 * in smpboot_control:
+	 * Secondary CPUs find out the offsets via their per_cpu data. For
+	 * parallel bringup they find it via the cpuid_to_apicid[] array
+	 * with their APIC ID obtained from CPUID. Otherwise the CPU number
+	 * is encoded directly in smpboot_control:
+	 *
 	 * Bit 31	STARTUP_SECONDARY flag (checked above)
 	 * Bit 30	STARTUP_APICID_CPUID_0B flag (use CPUID 0x0b)
 	 * Bit 29	STARTUP_APICID_CPUID_01 flag (use CPUID 0x01)
-	 * Bit 0-24	APIC ID if STARTUP_APICID_CPUID_xx flags are not set
+	 * Bit 0-24	CPU# if STARTUP_APICID_CPUID_xx flags are not set
 	 */
 	testl	$STARTUP_APICID_CPUID_0B, %edx
 	jnz	.Luse_cpuid_0b
 	testl	$STARTUP_APICID_CPUID_01, %edx
 	jnz	.Luse_cpuid_01
 	andl	$0x0FFFFFFF, %edx
-	jmp	.Lsetup_AP
+	mov	%edx, %ecx
+	jmp	.Linit_cpu_data
 
 .Luse_cpuid_01:
 	mov	$0x01, %eax
@@ -288,14 +291,14 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 	cmpl	(%rbx), %edx
 	jz	.Linit_cpu_data
 	addq	$4, %rbx
-	addq	$8, %rcx
+	inc	%rcx
 	jmp	.Lfind_cpunr
 
 .Linit_cpu_data:
+	/* ECX contains the CPU# of the current CPU */
 	/* Get the per cpu offset */
 	leaq	__per_cpu_offset(%rip), %rbx
-	addq	%rcx, %rbx
-	movq	(%rbx), %rbx
+	movq	(%rbx,%rcx,8), %rbx
 	/* Save it for GS BASE setup */
 	movq	%rbx, initial_gs(%rip)
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index cae916040c55..5149676881e0 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1146,7 +1146,7 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle,
 		early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu);
 		initial_stack  = idle->thread.sp;
 	} else if (!do_parallel_bringup) {
-		smpboot_control = STARTUP_SECONDARY | apicid;
+		smpboot_control = STARTUP_SECONDARY | cpu;
 	}
 
 	/* Enable the espfix hack for this CPU */
Thomas Gleixner Feb. 8, 2023, 1:13 p.m. UTC | #4
On Wed, Feb 08 2023 at 00:09, Brian Gerst wrote:
> On Tue, Feb 7, 2023 at 6:10 PM Usama Arif <usama.arif@bytedance.com> wrote:
>> Introduce a global variable 'smpboot_control' indicating to the AP how
>> it should find its APIC ID. For a serialized bringup, the APIC ID is
>> explicitly passed in the low bits of smpboot_control, while for parallel
>> mode there are flags directing the AP to find its APIC ID in CPUID leaf
>> 0x0b (for X2APIC mode) or CPUID leaf 0x01 where 8 bits are sufficient.
>
> For the serialized bringup case, it would be simpler to just put the
> cpu number in the lower bits instead of the APIC id, skipping the
> lookup.

Yes and no. It can be done, but I rather prefer the consistency of the
data and the mechanism. The "overhead" or "win" is not even measurable.

Thanks,

        tglx
David Woodhouse Feb. 8, 2023, 2:41 p.m. UTC | #5
On Wed, 2023-02-08 at 14:13 +0100, Thomas Gleixner wrote:
> On Wed, Feb 08 2023 at 00:09, Brian Gerst wrote:
> > On Tue, Feb 7, 2023 at 6:10 PM Usama Arif <usama.arif@bytedance.com> wrote:
> > > Introduce a global variable 'smpboot_control' indicating to the AP how
> > > it should find its APIC ID. For a serialized bringup, the APIC ID is
> > > explicitly passed in the low bits of smpboot_control, while for parallel
> > > mode there are flags directing the AP to find its APIC ID in CPUID leaf
> > > 0x0b (for X2APIC mode) or CPUID leaf 0x01 where 8 bits are sufficient.
> > 
> > For the serialized bringup case, it would be simpler to just put the
> > cpu number in the lower bits instead of the APIC id, skipping the
> > lookup.
> 
> Yes and no. It can be done, but I rather prefer the consistency of the
> data and the mechanism. The "overhead" or "win" is not even measurable.


Yeah. I might do this much though, just to track CPU# simply in %ecx:

--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -285,17 +285,15 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify,
SYM_L_GLOBAL)
        leaq    cpuid_to_apicid(%rip), %rbx
 
 .Lfind_cpunr:
-       cmpl    (%rbx), %edx
+       cmpl    (%rbx,%rcx,4), %edx
        jz      .Linit_cpu_data
-       addq    $4, %rbx
-       addq    $8, %rcx
+       inc     %rcx
        jmp     .Lfind_cpunr
 
 .Linit_cpu_data:
-       /* Get the per cpu offset */
+       /* Get the per cpu offset for the given CPU# which is in ECX */
        leaq    __per_cpu_offset(%rip), %rbx
-       addq    %rcx, %rbx
-       movq    (%rbx), %rbx
+       movq    (%rbx,%rcx,8), %rbx
        /* Save it for GS BASE setup */
        movq    %rbx, initial_gs(%rip)
diff mbox series

Patch

diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
index a336feef0af1..f0357cfe2fb0 100644
--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -52,6 +52,7 @@  struct trampoline_header {
 	u64 efer;
 	u32 cr4;
 	u32 flags;
+	u32 lock;
 #endif
 };
 
@@ -65,6 +66,8 @@  extern unsigned long initial_stack;
 extern unsigned long initial_vc_handler;
 #endif
 
+extern u32 *trampoline_lock;
+
 extern unsigned char real_mode_blob[];
 extern unsigned char real_mode_relocs[];
 
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index b4dbb20dab1a..33c0d5fd8af6 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -199,5 +199,13 @@  extern void nmi_selftest(void);
 #define nmi_selftest() do { } while (0)
 #endif
 
-#endif /* __ASSEMBLY__ */
+extern unsigned int smpboot_control;
+
+#endif /* !__ASSEMBLY__ */
+
+/* Control bits for startup_64 */
+#define STARTUP_SECONDARY	0x80000000
+#define STARTUP_APICID_CPUID_0B	0x40000000
+#define STARTUP_APICID_CPUID_01	0x20000000
+
 #endif /* _ASM_X86_SMP_H */
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 3b7f4cdbf2e0..06adf340a0f1 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -115,6 +115,7 @@  int x86_acpi_suspend_lowlevel(void)
 	early_gdt_descr.address =
 			(unsigned long)get_cpu_gdt_rw(smp_processor_id());
 	initial_gs = per_cpu_offset(smp_processor_id());
+	smpboot_control = 0;
 #endif
 	initial_code = (unsigned long)wakeup_long64;
        saved_magic = 0x123456789abcdef0L;
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 20d9a604da7c..ac1d7e5da1f2 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2377,7 +2377,7 @@  static int nr_logical_cpuids = 1;
 /*
  * Used to store mapping between logical CPU IDs and APIC IDs.
  */
-static int cpuid_to_apicid[] = {
+int cpuid_to_apicid[] = {
 	[0 ... NR_CPUS - 1] = -1,
 };
 
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 222efd4a09bc..656e6018b9d4 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -25,6 +25,7 @@ 
 #include <asm/export.h>
 #include <asm/nospec-branch.h>
 #include <asm/fixmap.h>
+#include <asm/smp.h>
 
 /*
  * We are not able to switch in one step to the final KERNEL ADDRESS SPACE
@@ -241,6 +242,77 @@  SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 	UNWIND_HINT_EMPTY
 	ANNOTATE_NOENDBR // above
 
+#ifdef CONFIG_SMP
+	/*
+	 * Is this the boot CPU coming up? If so everything is available
+	 * in initial_gs, initial_stack and early_gdt_descr.
+	 */
+	movl	smpboot_control(%rip), %edx
+	testl	$STARTUP_SECONDARY, %edx
+	jz	.Lsetup_cpu
+
+	/*
+	 * Secondary CPUs find out the offsets via the APIC ID. For parallel
+	 * boot the APIC ID is retrieved from CPUID, otherwise it's encoded
+	 * in smpboot_control:
+	 * Bit 31	STARTUP_SECONDARY flag (checked above)
+	 * Bit 30	STARTUP_APICID_CPUID_0B flag (use CPUID 0x0b)
+	 * Bit 29	STARTUP_APICID_CPUID_01 flag (use CPUID 0x01)
+	 * Bit 0-24	APIC ID if STARTUP_APICID_CPUID_xx flags are not set
+	 */
+	testl	$STARTUP_APICID_CPUID_0B, %edx
+	jnz	.Luse_cpuid_0b
+	testl	$STARTUP_APICID_CPUID_01, %edx
+	jnz	.Luse_cpuid_01
+	andl	$0x0FFFFFFF, %edx
+	jmp	.Lsetup_AP
+
+.Luse_cpuid_01:
+	mov	$0x01, %eax
+	cpuid
+	mov	%ebx, %edx
+	shr	$24, %edx
+	jmp	.Lsetup_AP
+
+.Luse_cpuid_0b:
+	mov	$0x0B, %eax
+	xorl	%ecx, %ecx
+	cpuid
+
+.Lsetup_AP:
+	/* EDX contains the APICID of the current CPU */
+	xorl	%ecx, %ecx
+	leaq	cpuid_to_apicid(%rip), %rbx
+
+.Lfind_cpunr:
+	cmpl	(%rbx), %edx
+	jz	.Linit_cpu_data
+	addq	$4, %rbx
+	addq	$8, %rcx
+	jmp	.Lfind_cpunr
+
+.Linit_cpu_data:
+	/* Get the per cpu offset */
+	leaq	__per_cpu_offset(%rip), %rbx
+	addq	%rcx, %rbx
+	movq	(%rbx), %rbx
+	/* Save it for GS BASE setup */
+	movq	%rbx, initial_gs(%rip)
+
+	/* Calculate the GDT address */
+	movq	$gdt_page, %rcx
+	addq	%rbx, %rcx
+	movq	%rcx, early_gdt_descr_base(%rip)
+
+	/* Find the idle task stack */
+	movq	$idle_threads, %rcx
+	addq	%rbx, %rcx
+	movq	(%rcx), %rcx
+	movq	TASK_threadsp(%rcx), %rcx
+	movq	%rcx, initial_stack(%rip)
+#endif /* CONFIG_SMP */
+
+.Lsetup_cpu:
 	/*
 	 * We must switch to a new descriptor in kernel space for the GDT
 	 * because soon the kernel won't have access anymore to the userspace
@@ -281,6 +353,14 @@  SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 	 */
 	movq initial_stack(%rip), %rsp
 
+	/* Drop the realmode protection. For the boot CPU the pointer is NULL! */
+	movq	trampoline_lock(%rip), %rax
+	testq	%rax, %rax
+	jz	.Lsetup_idt
+	lock
+	btrl	$0, (%rax)
+
+.Lsetup_idt:
 	/* Setup and Load IDT */
 	pushq	%rsi
 	call	early_setup_idt
@@ -426,6 +506,7 @@  SYM_DATA(initial_vc_handler,	.quad handle_vc_boot_ghcb)
  * reliably detect the end of the stack.
  */
 SYM_DATA(initial_stack, .quad init_thread_union + THREAD_SIZE - FRAME_SIZE)
+SYM_DATA(trampoline_lock, .quad 0);
 	__FINITDATA
 
 	__INIT
@@ -660,6 +741,9 @@  SYM_DATA_END(level1_fixmap_pgt)
 SYM_DATA(early_gdt_descr,		.word GDT_ENTRIES*8-1)
 SYM_DATA_LOCAL(early_gdt_descr_base,	.quad INIT_PER_CPU_VAR(gdt_page))
 
+	.align 16
+SYM_DATA(smpboot_control,		.long 0)
+
 	.align 16
 /* This must match the first entry in level2_kernel_pgt */
 SYM_DATA(phys_base, .quad 0x0)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index eee717086ab7..7abdf347493f 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -798,6 +798,16 @@  static int __init cpu_init_udelay(char *str)
 }
 early_param("cpu_init_udelay", cpu_init_udelay);
 
+static bool do_parallel_bringup = true;
+
+static int __init no_parallel_bringup(char *str)
+{
+	do_parallel_bringup = false;
+
+	return 0;
+}
+early_param("no_parallel_bringup", no_parallel_bringup);
+
 static void __init smp_quirk_init_udelay(void)
 {
 	/* if cmdline changed it from default, leave it alone */
@@ -1085,8 +1095,6 @@  int common_cpu_up(unsigned int cpu, struct task_struct *idle)
 #ifdef CONFIG_X86_32
 	/* Stack for startup_32 can be just as for start_secondary onwards */
 	per_cpu(pcpu_hot.top_of_stack, cpu) = task_top_of_stack(idle);
-#else
-	initial_gs = per_cpu_offset(cpu);
 #endif
 	return 0;
 }
@@ -1111,9 +1119,14 @@  static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle,
 		start_ip = real_mode_header->trampoline_start64;
 #endif
 	idle->thread.sp = (unsigned long)task_pt_regs(idle);
-	early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu);
 	initial_code = (unsigned long)start_secondary;
-	initial_stack  = idle->thread.sp;
+
+	if (IS_ENABLED(CONFIG_X86_32)) {
+		early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu);
+		initial_stack  = idle->thread.sp;
+	} else if (!do_parallel_bringup) {
+		smpboot_control = STARTUP_SECONDARY | apicid;
+	}
 
 	/* Enable the espfix hack for this CPU */
 	init_espfix_ap(cpu);
@@ -1513,6 +1526,45 @@  void __init native_smp_prepare_cpus(unsigned int max_cpus)
 
 	speculative_store_bypass_ht_init();
 
+	/*
+	 * We can do 64-bit AP bringup in parallel if the CPU reports
+	 * its APIC ID in CPUID (either leaf 0x0B if we need the full
+	 * APIC ID in X2APIC mode, or leaf 0x01 if 8 bits are
+	 * sufficient). Otherwise it's too hard. And not for SEV-ES
+	 * guests because they can't use CPUID that early.
+	 */
+	if (IS_ENABLED(CONFIG_X86_32) || boot_cpu_data.cpuid_level < 1 ||
+	    (x2apic_mode && boot_cpu_data.cpuid_level < 0xb) ||
+	    cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT))
+		do_parallel_bringup = false;
+
+	if (do_parallel_bringup && x2apic_mode) {
+		unsigned int eax, ebx, ecx, edx;
+
+		/*
+		 * To support parallel bringup in x2apic mode, the AP will need
+		 * to obtain its APIC ID from CPUID 0x0B, since CPUID 0x01 has
+		 * only 8 bits. Check that it is present and seems correct.
+		 */
+		cpuid_count(0xb, 0, &eax, &ebx, &ecx, &edx);
+
+		/*
+		 * AMD says that if executed with an umimplemented level in
+		 * ECX, then it will return all zeroes in EAX. Intel says it
+		 * will return zeroes in both EAX and EBX. Checking only EAX
+		 * should be sufficient.
+		 */
+		if (eax) {
+			smpboot_control = STARTUP_SECONDARY | STARTUP_APICID_CPUID_0B;
+		} else {
+			pr_info("Disabling parallel bringup because CPUID 0xb looks untrustworthy\n");
+			do_parallel_bringup = false;
+		}
+	} else if (do_parallel_bringup) {
+		/* Without X2APIC, what's in CPUID 0x01 should suffice. */
+		smpboot_control = STARTUP_SECONDARY | STARTUP_APICID_CPUID_01;
+	}
+
 	snp_set_wakeup_secondary_cpu();
 }
 
diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
index af565816d2ba..788e5559549f 100644
--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -154,6 +154,9 @@  static void __init setup_real_mode(void)
 
 	trampoline_header->flags = 0;
 
+	trampoline_lock = &trampoline_header->lock;
+	*trampoline_lock = 0;
+
 	trampoline_pgd = (u64 *) __va(real_mode_header->trampoline_pgd);
 
 	/* Map the real mode stub as virtual == physical */
diff --git a/arch/x86/realmode/rm/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S
index e38d61d6562e..49ebc1636ffd 100644
--- a/arch/x86/realmode/rm/trampoline_64.S
+++ b/arch/x86/realmode/rm/trampoline_64.S
@@ -49,6 +49,19 @@  SYM_CODE_START(trampoline_start)
 	mov	%ax, %es
 	mov	%ax, %ss
 
+	/*
+	 * Make sure only one CPU fiddles with the realmode stack
+	 */
+.Llock_rm:
+	btl	$0, tr_lock
+	jnc	2f
+	pause
+	jmp	.Llock_rm
+2:
+	lock
+	btsl	$0, tr_lock
+	jc	.Llock_rm
+
 	# Setup stack
 	movl	$rm_stack_end, %esp
 
@@ -241,6 +254,7 @@  SYM_DATA_START(trampoline_header)
 	SYM_DATA(tr_efer,		.space 8)
 	SYM_DATA(tr_cr4,		.space 4)
 	SYM_DATA(tr_flags,		.space 4)
+	SYM_DATA(tr_lock,		.space 4)
 SYM_DATA_END(trampoline_header)
 
 #include "trampoline_common.S"
diff --git a/kernel/smpboot.c b/kernel/smpboot.c
index 2c7396da470c..a18a21dff9bc 100644
--- a/kernel/smpboot.c
+++ b/kernel/smpboot.c
@@ -25,7 +25,7 @@ 
  * For the hotplug case we keep the task structs around and reuse
  * them.
  */
-static DEFINE_PER_CPU(struct task_struct *, idle_threads);
+DEFINE_PER_CPU(struct task_struct *, idle_threads);
 
 struct task_struct *idle_thread_get(unsigned int cpu)
 {