[v8,10/11] PCI: qcom: Add SM8550 PCIe support

Commit Message

Abel Vesa Feb. 6, 2023, 9:26 p.m. UTC

Add compatible for both PCIe found on SM8550.
Also add the noc_aggr and cnoc_sf_axi clocks needed by the SM8550.

Signed-off-by: Abel Vesa <[e-mail]>
Reviewed-by: Konrad Dybcio <[e-mail]>
Reviewed-by: Manivannan Sadhasivam <[e-mail]>
---

The v7 of this patchset is:
https://lore.kernel.org/all/[e-mail]/

Changes since v7:
 * Mentioned the noc_aggr clock in the commit message as well, while
   using the cnoc_sf_axi instead of cnoc_pcie_sf_axi

Changes since v6:
 * none

Changes since v5:
 * none

Changes since v4:
 * added Mani's R-b tag

Changes since v3:
 * renamed cnoc_pcie_sf_axi to cnoc_sf_axi

Changes since v2:
 * none

Changes since v1:
 * changed the subject line prefix for the patch to match the history,
   like Bjorn Helgaas suggested.
 * added Konrad's R-b tag

 drivers/pci/controller/dwc/pcie-qcom.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

Comments

Johan Hovold Feb. 8, 2023, 4:58 p.m. UTC | #1

On Mon, Feb 06, 2023 at 11:26:18PM +0200, Abel Vesa wrote:
> Add compatible for both PCIe found on SM8550.
> Also add the noc_aggr and cnoc_sf_axi clocks needed by the SM8550.
> 
> Signed-off-by: Abel Vesa <[e-mail]>
> Reviewed-by: Konrad Dybcio <[e-mail]>
> Reviewed-by: Manivannan Sadhasivam <[e-mail]>
> ---

> @@ -1237,17 +1239,17 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
>  	if (ret < 0)
>  		goto err_disable_regulators;
>  
> -	ret = reset_control_assert(res->pci_reset);
> -	if (ret < 0) {
> -		dev_err(dev, "cannot assert pci reset\n");
> +	ret = reset_control_assert(res->rst);
> +	if (ret) {
> +		dev_err(dev, "reset assert failed (%d)\n", ret);
>  		goto err_disable_clocks;
>  	}
>  
>  	usleep_range(1000, 1500);
>  
> -	ret = reset_control_deassert(res->pci_reset);
> -	if (ret < 0) {
> -		dev_err(dev, "cannot deassert pci reset\n");
> +	ret = reset_control_deassert(res->rst);
> +	if (ret) {
> +		dev_err(dev, "reset deassert failed (%d)\n", ret);
>  		goto err_disable_clocks;
>  	}

I'd still like to know if it's indeed ok the deassert the 'pci' reset
before the new 'link_down' reset here which is what this code currently
would do (i.e. same order as for assert, while if you had used the bulk
reset API it would have deasserted in the reverse order).

Other than that:

Reviewed-by: Johan Hovold <[e-mail]>

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index a232b04af048..6a70c9c6f98d 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -182,10 +182,10 @@  struct qcom_pcie_resources_2_3_3 {
 
 /* 6 clocks typically, 7 for sm8250 */
 struct qcom_pcie_resources_2_7_0 {
-	struct clk_bulk_data clks[12];
+	struct clk_bulk_data clks[14];
 	int num_clks;
 	struct regulator_bulk_data supplies[2];
-	struct reset_control *pci_reset;
+	struct reset_control *rst;
 };
 
 struct qcom_pcie_resources_2_9_0 {
@@ -1177,9 +1177,9 @@  static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	unsigned int idx;
 	int ret;
 
-	res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
-	if (IS_ERR(res->pci_reset))
-		return PTR_ERR(res->pci_reset);
+	res->rst = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR(res->rst))
+		return PTR_ERR(res->rst);
 
 	res->supplies[0].supply = "vdda";
 	res->supplies[1].supply = "vddpe-3v3";
@@ -1205,9 +1205,11 @@  static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	res->clks[idx++].id = "ddrss_sf_tbu";
 	res->clks[idx++].id = "aggre0";
 	res->clks[idx++].id = "aggre1";
+	res->clks[idx++].id = "noc_aggr";
 	res->clks[idx++].id = "noc_aggr_4";
 	res->clks[idx++].id = "noc_aggr_south_sf";
 	res->clks[idx++].id = "cnoc_qx";
+	res->clks[idx++].id = "cnoc_sf_axi";
 
 	num_opt_clks = idx - num_clks;
 	res->num_clks = idx;
@@ -1237,17 +1239,17 @@  static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 	if (ret < 0)
 		goto err_disable_regulators;
 
-	ret = reset_control_assert(res->pci_reset);
-	if (ret < 0) {
-		dev_err(dev, "cannot assert pci reset\n");
+	ret = reset_control_assert(res->rst);
+	if (ret) {
+		dev_err(dev, "reset assert failed (%d)\n", ret);
 		goto err_disable_clocks;
 	}
 
 	usleep_range(1000, 1500);
 
-	ret = reset_control_deassert(res->pci_reset);
-	if (ret < 0) {
-		dev_err(dev, "cannot deassert pci reset\n");
+	ret = reset_control_deassert(res->rst);
+	if (ret) {
+		dev_err(dev, "reset deassert failed (%d)\n", ret);
 		goto err_disable_clocks;
 	}
 
@@ -1841,6 +1843,7 @@  static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-sm8350", .data = &cfg_1_9_0 },
 	{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 },
 	{ .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 },
+	{ .compatible = "qcom,pcie-sm8550", .data = &cfg_1_9_0 },
 	{ }
 };