diff mbox series

[5/7] ARM: dts: exynos: drop default status from I2C10 on Arndale

Message ID 20230207210020.677007-5-krzysztof.kozlowski@linaro.org (mailing list archive)
State Under Review
Commit 4804e14912bd48db57f1aec0d41f6f92fe80c870
Headers show
Series [1/7] ARM: dts: exynos: Remove empty camera pinctrl configuration in Trats | expand

Commit Message

Krzysztof Kozlowski Feb. 7, 2023, 9 p.m. UTC
status=okay is by default for new nodes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 1 -
 1 file changed, 1 deletion(-)

Comments

Krzysztof Kozlowski Feb. 9, 2023, 11:10 a.m. UTC | #1
On Tue, 7 Feb 2023 22:00:18 +0100, Krzysztof Kozlowski wrote:
> status=okay is by default for new nodes.
> 
> 

Applied, thanks!

[5/7] ARM: dts: exynos: drop default status from I2C10 on Arndale
      https://git.kernel.org/krzk/linux/c/4804e14912bd48db57f1aec0d41f6f92fe80c870

Best regards,
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 71c0e87d3a1d..e995cfee03f3 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -623,7 +623,6 @@  &soc {
 	i2c_ddc: i2c-10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c2_gpio_bus>;
-		status = "okay";
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;