diff mbox series

[11/12] riscv: dts: starfive: jh7100: Add sysmain and gmac DT nodes

Message ID 20230211031821.976408-12-cristian.ciocaltea@collabora.com (mailing list archive)
State New, archived
Headers show
Series Enable networking support for StarFive JH7100 SoC | expand

Commit Message

Cristian Ciocaltea Feb. 11, 2023, 3:18 a.m. UTC
Provide the sysmain and gmac DT nodes supporting the DWMAC found on the
StarFive JH7100 SoC.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 arch/riscv/boot/dts/starfive/jh7100.dtsi | 38 ++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

Comments

Krzysztof Kozlowski Feb. 13, 2023, 9:26 a.m. UTC | #1
On 11/02/2023 04:18, Cristian Ciocaltea wrote:
> Provide the sysmain and gmac DT nodes supporting the DWMAC found on the
> StarFive JH7100 SoC.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
> ---
>  arch/riscv/boot/dts/starfive/jh7100.dtsi | 38 ++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
> index 88f91bc5753b..0918af7b6eb0 100644
> --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
> @@ -164,6 +164,44 @@ rstgen: reset-controller@11840000 {
>  			#reset-cells = <1>;
>  		};
>  
> +		sysmain: syscon@11850000 {
> +			compatible = "starfive,jh7100-sysmain", "syscon";
> +			reg = <0x0 0x11850000 0x0 0x10000>;
> +		};
> +
> +		gmac: ethernet@10020000 {

Aren't the nodes ordered by address?

Best regards,
Krzysztof
Cristian Ciocaltea Feb. 14, 2023, 6:15 p.m. UTC | #2
On 2/13/23 11:26, Krzysztof Kozlowski wrote:
> On 11/02/2023 04:18, Cristian Ciocaltea wrote:
>> Provide the sysmain and gmac DT nodes supporting the DWMAC found on the
>> StarFive JH7100 SoC.
>>
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
>> ---
>>   arch/riscv/boot/dts/starfive/jh7100.dtsi | 38 ++++++++++++++++++++++++
>>   1 file changed, 38 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
>> index 88f91bc5753b..0918af7b6eb0 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
>> @@ -164,6 +164,44 @@ rstgen: reset-controller@11840000 {
>>   			#reset-cells = <1>;
>>   		};
>>   
>> +		sysmain: syscon@11850000 {
>> +			compatible = "starfive,jh7100-sysmain", "syscon";
>> +			reg = <0x0 0x11850000 0x0 0x10000>;
>> +		};
>> +
>> +		gmac: ethernet@10020000 {
> 
> Aren't the nodes ordered by address?

Right, I missed the ordering trying to keep the related nodes together. 
Will fix.

Thanks,
Cristian

> Best regards,
> Krzysztof
> 
>
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
index 88f91bc5753b..0918af7b6eb0 100644
--- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -164,6 +164,44 @@  rstgen: reset-controller@11840000 {
 			#reset-cells = <1>;
 		};
 
+		sysmain: syscon@11850000 {
+			compatible = "starfive,jh7100-sysmain", "syscon";
+			reg = <0x0 0x11850000 0x0 0x10000>;
+		};
+
+		gmac: ethernet@10020000 {
+			compatible = "starfive,jh7100-dwmac", "snps,dwmac";
+			reg = <0x0 0x10020000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_GMAC_ROOT_DIV>,
+				 <&clkgen JH7100_CLK_GMAC_AHB>,
+				 <&clkgen JH7100_CLK_GMAC_PTP_REF>,
+				 <&clkgen JH7100_CLK_GMAC_GTX>,
+				 <&clkgen JH7100_CLK_GMAC_TX_INV>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref", "gtxc", "tx";
+			resets = <&rstgen JH7100_RSTN_GMAC_AHB>;
+			reset-names = "ahb";
+			interrupts = <6>, <7>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			max-frame-size = <9000>;
+			phy-mode = "rgmii-txid";
+			snps,multicast-filter-bins = <32>;
+			snps,perfect-filter-entries = <128>;
+			starfive,syscon = <&sysmain>;
+			rx-fifo-depth = <32768>;
+			tx-fifo-depth = <16384>;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,fixed-burst;
+			snps,force_thresh_dma_mode;
+			snps,no-pbl-x8;
+			status = "disabled";
+
+			stmmac_axi_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <0xf>;
+				snps,rd_osr_lmt = <0xf>;
+				snps,blen = <256 128 64 32 0 0 0>;
+			};
+		};
+
 		i2c0: i2c@118b0000 {
 			compatible = "snps,designware-i2c";
 			reg = <0x0 0x118b0000 0x0 0x10000>;