diff mbox series

[V2,5/6] arm64: dts: qcom: ipq9574: Add RPM related nodes

Message ID 20230217142030.16012-6-quic_devipriy@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add regulator support for IPQ9574 SoC | expand

Commit Message

Devi Priya Feb. 17, 2023, 2:20 p.m. UTC
Add RPM Glink, RPM message RAM and SMPA1 regulator
nodes to support frequency scaling on IPQ9574

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
---
 Changes in V2:
	- Splitted the RPM and CPU Freq changes to individual patches
	- Moved the regulators node to Board DT
	- Dropped the regulator-always-on property
	- Updated the compatible in regulators node with the existing
	  mp5496 compatible

 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 11 +++++++++++
 arch/arm64/boot/dts/qcom/ipq9574.dtsi        | 17 +++++++++++++++++
 2 files changed, 28 insertions(+)

Comments

Konrad Dybcio Feb. 17, 2023, 2:50 p.m. UTC | #1
On 17.02.2023 15:20, Devi Priya wrote:
> Add RPM Glink, RPM message RAM and SMPA1 regulator
> nodes to support frequency scaling on IPQ9574
> 
> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
> ---
>  Changes in V2:
> 	- Splitted the RPM and CPU Freq changes to individual patches
> 	- Moved the regulators node to Board DT
> 	- Dropped the regulator-always-on property
> 	- Updated the compatible in regulators node with the existing
> 	  mp5496 compatible
> 
>  arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 11 +++++++++++
>  arch/arm64/boot/dts/qcom/ipq9574.dtsi        | 17 +++++++++++++++++
>  2 files changed, 28 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
> index 21b53f34ce84..8a6caaeb0c4b 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
> @@ -57,6 +57,17 @@
>  	status = "okay";
>  };
>  
> +&rpm_requests {
> +	regulators {
> +		compatible = "qcom,rpm-mp5496-regulators";
> +
> +		ipq9574_s1: s1 {
> +			regulator-min-microvolt = <587500>;
> +			regulator-max-microvolt = <1075000>;
> +		};
> +	};
> +};
This belongs in a separate patch.

> +
>  &sdhc_1 {
>  	pinctrl-0 = <&sdc_default_state>;
>  	pinctrl-names = "default";
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index d20f3c7383f5..2f300cbab93e 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -133,6 +133,11 @@
>  		#size-cells = <2>;
>  		ranges;
>  
> +		rpm_msg_ram: rpm@60000 {
Since this is a part of the MMIO region and not a part of DRAM,
we generally put this node under /soc with the compatible of
qcom,rpm-msg-ram and without no-map.

And the node name then should be sram@.

> +			reg = <0x0 0x00060000 0x0 0x6000>;
> +			no-map;
> +		};
> +
>  		tz_region: tz@4a600000 {
>  			reg = <0x0 0x4a600000 0x0 0x400000>;
>  			no-map;
> @@ -768,6 +773,18 @@
>  		};
>  	};
>  
> +	rpm-glink {
Alphabetically this should come before /soc.

Konrad
> +		compatible = "qcom,glink-rpm";
> +		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> +		qcom,rpm-msg-ram = <&rpm_msg_ram>;
> +		mboxes = <&apcs_glb 0>;
> +
> +		rpm_requests: glink-channel {
> +			compatible = "qcom,rpm-ipq9574";
> +			qcom,glink-channels = "rpm_requests";
> +		};
> +	};
> +
>  	timer {
>  		compatible = "arm,armv8-timer";
>  		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
Devi Priya Feb. 20, 2023, 1:53 p.m. UTC | #2
Hi Konrad,

Thanks for taking time to review the patch!

On 2/17/2023 8:20 PM, Konrad Dybcio wrote:
> 
> 
> On 17.02.2023 15:20, Devi Priya wrote:
>> Add RPM Glink, RPM message RAM and SMPA1 regulator
>> nodes to support frequency scaling on IPQ9574
>>
>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
>> ---
>>   Changes in V2:
>> 	- Splitted the RPM and CPU Freq changes to individual patches
>> 	- Moved the regulators node to Board DT
>> 	- Dropped the regulator-always-on property
>> 	- Updated the compatible in regulators node with the existing
>> 	  mp5496 compatible
>>
>>   arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 11 +++++++++++
>>   arch/arm64/boot/dts/qcom/ipq9574.dtsi        | 17 +++++++++++++++++
>>   2 files changed, 28 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>> index 21b53f34ce84..8a6caaeb0c4b 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>> +++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>> @@ -57,6 +57,17 @@
>>   	status = "okay";
>>   };
>>   
>> +&rpm_requests {
>> +	regulators {
>> +		compatible = "qcom,rpm-mp5496-regulators";
>> +
>> +		ipq9574_s1: s1 {
>> +			regulator-min-microvolt = <587500>;
>> +			regulator-max-microvolt = <1075000>;
>> +		};
>> +	};
>> +};
> This belongs in a separate patch.
> 
Do you recommend to move this change to the below patch in the next spin?
[PATCH V2 6/6]arm64: dts: qcom: ipq9574: Add cpufreq support
>> +
>>   &sdhc_1 {
>>   	pinctrl-0 = <&sdc_default_state>;
>>   	pinctrl-names = "default";
>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> index d20f3c7383f5..2f300cbab93e 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> @@ -133,6 +133,11 @@
>>   		#size-cells = <2>;
>>   		ranges;
>>   
>> +		rpm_msg_ram: rpm@60000 {
> Since this is a part of the MMIO region and not a part of DRAM,
> we generally put this node under /soc with the compatible of
> qcom,rpm-msg-ram and without no-map.
> 
> And the node name then should be sram@.
Sure, okay. Will update this in V3
> 
>> +			reg = <0x0 0x00060000 0x0 0x6000>;
>> +			no-map;
>> +		};
>> +
>>   		tz_region: tz@4a600000 {
>>   			reg = <0x0 0x4a600000 0x0 0x400000>;
>>   			no-map;
>> @@ -768,6 +773,18 @@
>>   		};
>>   	};
>>   
>> +	rpm-glink {
> Alphabetically this should come before /soc.
Okay
> 
> Konrad
>> +		compatible = "qcom,glink-rpm";
>> +		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
>> +		qcom,rpm-msg-ram = <&rpm_msg_ram>;
>> +		mboxes = <&apcs_glb 0>;
>> +
>> +		rpm_requests: glink-channel {
>> +			compatible = "qcom,rpm-ipq9574";
>> +			qcom,glink-channels = "rpm_requests";
>> +		};
>> +	};
>> +
>>   	timer {
>>   		compatible = "arm,armv8-timer";
>>   		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
Best Regards,
Devi Priya
Konrad Dybcio Feb. 20, 2023, 2:36 p.m. UTC | #3
On 20.02.2023 14:53, Devi Priya wrote:
> Hi Konrad,
> 
> Thanks for taking time to review the patch!
I appreciate your gratitude, but please don't toppost (a.k.a
don't reply in the first lines of the email), that's rather
frowned upon on LKML.

> 
> On 2/17/2023 8:20 PM, Konrad Dybcio wrote:
>>
>>
>> On 17.02.2023 15:20, Devi Priya wrote:
>>> Add RPM Glink, RPM message RAM and SMPA1 regulator
>>> nodes to support frequency scaling on IPQ9574
>>>
>>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
>>> ---
>>>   Changes in V2:
>>>     - Splitted the RPM and CPU Freq changes to individual patches
>>>     - Moved the regulators node to Board DT
>>>     - Dropped the regulator-always-on property
>>>     - Updated the compatible in regulators node with the existing
>>>       mp5496 compatible
>>>
>>>   arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 11 +++++++++++
>>>   arch/arm64/boot/dts/qcom/ipq9574.dtsi        | 17 +++++++++++++++++
>>>   2 files changed, 28 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>>> index 21b53f34ce84..8a6caaeb0c4b 100644
>>> --- a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>>> @@ -57,6 +57,17 @@
>>>       status = "okay";
>>>   };
>>>   +&rpm_requests {
>>> +    regulators {
>>> +        compatible = "qcom,rpm-mp5496-regulators";
>>> +
>>> +        ipq9574_s1: s1 {
>>> +            regulator-min-microvolt = <587500>;
>>> +            regulator-max-microvolt = <1075000>;
>>> +        };
>>> +    };
>>> +};
>> This belongs in a separate patch.
>>
> Do you recommend to move this change to the below patch in the next spin?
> [PATCH V2 6/6]arm64: dts: qcom: ipq9574: Add cpufreq support
Sounds good

Also, I think you missed a newline before &rpm_requests now that
I look at it.

Konrad
>>> +
>>>   &sdhc_1 {
>>>       pinctrl-0 = <&sdc_default_state>;
>>>       pinctrl-names = "default";
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>> index d20f3c7383f5..2f300cbab93e 100644
>>> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>> @@ -133,6 +133,11 @@
>>>           #size-cells = <2>;
>>>           ranges;
>>>   +        rpm_msg_ram: rpm@60000 {
>> Since this is a part of the MMIO region and not a part of DRAM,
>> we generally put this node under /soc with the compatible of
>> qcom,rpm-msg-ram and without no-map.
>>
>> And the node name then should be sram@.
> Sure, okay. Will update this in V3
>>
>>> +            reg = <0x0 0x00060000 0x0 0x6000>;
>>> +            no-map;
>>> +        };
>>> +
>>>           tz_region: tz@4a600000 {
>>>               reg = <0x0 0x4a600000 0x0 0x400000>;
>>>               no-map;
>>> @@ -768,6 +773,18 @@
>>>           };
>>>       };
>>>   +    rpm-glink {
>> Alphabetically this should come before /soc.
> Okay
>>
>> Konrad
>>> +        compatible = "qcom,glink-rpm";
>>> +        interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
>>> +        qcom,rpm-msg-ram = <&rpm_msg_ram>;
>>> +        mboxes = <&apcs_glb 0>;
>>> +
>>> +        rpm_requests: glink-channel {
>>> +            compatible = "qcom,rpm-ipq9574";
>>> +            qcom,glink-channels = "rpm_requests";
>>> +        };
>>> +    };
>>> +
>>>       timer {
>>>           compatible = "arm,armv8-timer";
>>>           interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> Best Regards,
> Devi Priya
Devi Priya Feb. 20, 2023, 3:22 p.m. UTC | #4
On 2/20/2023 8:06 PM, Konrad Dybcio wrote:
> 
> 
> On 20.02.2023 14:53, Devi Priya wrote:
>> Hi Konrad,
>>
>> Thanks for taking time to review the patch!
> I appreciate your gratitude, but please don't toppost (a.k.a
> don't reply in the first lines of the email), that's rather
> frowned upon on LKML.
> 
Sure, understood!
>>
>> On 2/17/2023 8:20 PM, Konrad Dybcio wrote:
>>>
>>>
>>> On 17.02.2023 15:20, Devi Priya wrote:
>>>> Add RPM Glink, RPM message RAM and SMPA1 regulator
>>>> nodes to support frequency scaling on IPQ9574
>>>>
>>>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
>>>> ---
>>>>    Changes in V2:
>>>>      - Splitted the RPM and CPU Freq changes to individual patches
>>>>      - Moved the regulators node to Board DT
>>>>      - Dropped the regulator-always-on property
>>>>      - Updated the compatible in regulators node with the existing
>>>>        mp5496 compatible
>>>>
>>>>    arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 11 +++++++++++
>>>>    arch/arm64/boot/dts/qcom/ipq9574.dtsi        | 17 +++++++++++++++++
>>>>    2 files changed, 28 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>>>> index 21b53f34ce84..8a6caaeb0c4b 100644
>>>> --- a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>>>> @@ -57,6 +57,17 @@
>>>>        status = "okay";
>>>>    };
>>>>    +&rpm_requests {
>>>> +    regulators {
>>>> +        compatible = "qcom,rpm-mp5496-regulators";
>>>> +
>>>> +        ipq9574_s1: s1 {
>>>> +            regulator-min-microvolt = <587500>;
>>>> +            regulator-max-microvolt = <1075000>;
>>>> +        };
>>>> +    };
>>>> +};
>>> This belongs in a separate patch.
>>>
>> Do you recommend to move this change to the below patch in the next spin?
>> [PATCH V2 6/6]arm64: dts: qcom: ipq9574: Add cpufreq support
> Sounds good
> 
> Also, I think you missed a newline before &rpm_requests now that
> I look at it.
Sure, will take care of that in V3
> 
> Konrad
>>>> +
>>>>    &sdhc_1 {
>>>>        pinctrl-0 = <&sdc_default_state>;
>>>>        pinctrl-names = "default";
>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>> index d20f3c7383f5..2f300cbab93e 100644
>>>> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>> @@ -133,6 +133,11 @@
>>>>            #size-cells = <2>;
>>>>            ranges;
>>>>    +        rpm_msg_ram: rpm@60000 {
>>> Since this is a part of the MMIO region and not a part of DRAM,
>>> we generally put this node under /soc with the compatible of
>>> qcom,rpm-msg-ram and without no-map.
>>>
>>> And the node name then should be sram@.
>> Sure, okay. Will update this in V3
>>>
>>>> +            reg = <0x0 0x00060000 0x0 0x6000>;
>>>> +            no-map;
>>>> +        };
>>>> +
>>>>            tz_region: tz@4a600000 {
>>>>                reg = <0x0 0x4a600000 0x0 0x400000>;
>>>>                no-map;
>>>> @@ -768,6 +773,18 @@
>>>>            };
>>>>        };
>>>>    +    rpm-glink {
>>> Alphabetically this should come before /soc.
>> Okay
>>>
>>> Konrad
>>>> +        compatible = "qcom,glink-rpm";
>>>> +        interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
>>>> +        qcom,rpm-msg-ram = <&rpm_msg_ram>;
>>>> +        mboxes = <&apcs_glb 0>;
>>>> +
>>>> +        rpm_requests: glink-channel {
>>>> +            compatible = "qcom,rpm-ipq9574";
>>>> +            qcom,glink-channels = "rpm_requests";
>>>> +        };
>>>> +    };
>>>> +
>>>>        timer {
>>>>            compatible = "arm,armv8-timer";
>>>>            interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> Best Regards,
>> Devi Priya
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
index 21b53f34ce84..8a6caaeb0c4b 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
@@ -57,6 +57,17 @@ 
 	status = "okay";
 };
 
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+			regulator-min-microvolt = <587500>;
+			regulator-max-microvolt = <1075000>;
+		};
+	};
+};
+
 &sdhc_1 {
 	pinctrl-0 = <&sdc_default_state>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index d20f3c7383f5..2f300cbab93e 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -133,6 +133,11 @@ 
 		#size-cells = <2>;
 		ranges;
 
+		rpm_msg_ram: rpm@60000 {
+			reg = <0x0 0x00060000 0x0 0x6000>;
+			no-map;
+		};
+
 		tz_region: tz@4a600000 {
 			reg = <0x0 0x4a600000 0x0 0x400000>;
 			no-map;
@@ -768,6 +773,18 @@ 
 		};
 	};
 
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&apcs_glb 0>;
+
+		rpm_requests: glink-channel {
+			compatible = "qcom,rpm-ipq9574";
+			qcom,glink-channels = "rpm_requests";
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,