Message ID | 20230223-topic-opp-v2-3-24ed24cd7358@linaro.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | OPP and devfreq for all Adrenos | expand |
On Thu, 23 Feb 2023 at 03:47, Konrad Dybcio <konrad.dybcio@linaro.org> wrote: > > Implement gpu_busy based on the downstream msm-3.4 code [1]. This > allows us to use devfreq on this old old old hardware! > > [1] https://github.com/LineageOS/android_kernel_sony_apq8064/blob/lineage-16.0/drivers/gpu/msm/adreno_a2xx.c#L1975 > > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Small nit below > --- > drivers/gpu/drm/msm/adreno/a2xx_gpu.c | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/drivers/gpu/drm/msm/adreno/a2xx_gpu.c b/drivers/gpu/drm/msm/adreno/a2xx_gpu.c > index c67089a7ebc1..6f9876b37db5 100644 > --- a/drivers/gpu/drm/msm/adreno/a2xx_gpu.c > +++ b/drivers/gpu/drm/msm/adreno/a2xx_gpu.c > @@ -481,6 +481,29 @@ a2xx_create_address_space(struct msm_gpu *gpu, struct platform_device *pdev) > return aspace; > } > > +/* While the precise size of this field is unknown, it holds at least these three values.. */ > +static u64 a2xx_gpu_busy(struct msm_gpu *gpu, unsigned long *out_sample_rate) > +{ > + u64 busy_cycles; > + > + /* Freeze the counter */ > + gpu_write(gpu, REG_A2XX_CP_PERFMON_CNTL, PERF_STATE_FREEZE); > + > + busy_cycles = gpu_read64(gpu, REG_A2XX_RBBM_PERFCOUNTER1_LO); > + > + /* Reset the counter */ > + gpu_write(gpu, REG_A2XX_CP_PERFMON_CNTL, PERF_STATE_RESET); > + > + /* Re-enable the performance monitors */ > + gpu_rmw(gpu, REG_A2XX_RBBM_PM_OVERRIDE2, BIT(6), BIT(6)); It's DEBUG_PERF_SCLK_PM_OVERRIDE See https://github.com/genesi/linux-legacy/blob/master/drivers/mxc/amd-gpu/include/reg/yamato/10/yamato_mask.h#L4428 > + gpu_write(gpu, REG_A2XX_RBBM_PERFCOUNTER1_SELECT, 1); > + gpu_write(gpu, REG_A2XX_CP_PERFMON_CNTL, PERF_STATE_ENABLE); > + > + *out_sample_rate = clk_get_rate(gpu->core_clk); > + > + return busy_cycles; > +} > + > static u32 a2xx_get_rptr(struct msm_gpu *gpu, struct msm_ringbuffer *ring) > { > ring->memptrs->rptr = gpu_read(gpu, REG_AXXX_CP_RB_RPTR); > @@ -502,6 +525,7 @@ static const struct adreno_gpu_funcs funcs = { > #if defined(CONFIG_DEBUG_FS) || defined(CONFIG_DEV_COREDUMP) > .show = adreno_show, > #endif > + .gpu_busy = a2xx_gpu_busy, > .gpu_state_get = a2xx_gpu_state_get, > .gpu_state_put = adreno_gpu_state_put, > .create_address_space = a2xx_create_address_space, > > -- > 2.39.2 >
On 23.02.2023 03:09, Dmitry Baryshkov wrote: > On Thu, 23 Feb 2023 at 03:47, Konrad Dybcio <konrad.dybcio@linaro.org> wrote: >> >> Implement gpu_busy based on the downstream msm-3.4 code [1]. This >> allows us to use devfreq on this old old old hardware! >> >> [1] https://github.com/LineageOS/android_kernel_sony_apq8064/blob/lineage-16.0/drivers/gpu/msm/adreno_a2xx.c#L1975 >> >> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > Small nit below > >> --- >> drivers/gpu/drm/msm/adreno/a2xx_gpu.c | 24 ++++++++++++++++++++++++ >> 1 file changed, 24 insertions(+) >> >> diff --git a/drivers/gpu/drm/msm/adreno/a2xx_gpu.c b/drivers/gpu/drm/msm/adreno/a2xx_gpu.c >> index c67089a7ebc1..6f9876b37db5 100644 >> --- a/drivers/gpu/drm/msm/adreno/a2xx_gpu.c >> +++ b/drivers/gpu/drm/msm/adreno/a2xx_gpu.c >> @@ -481,6 +481,29 @@ a2xx_create_address_space(struct msm_gpu *gpu, struct platform_device *pdev) >> return aspace; >> } >> >> +/* While the precise size of this field is unknown, it holds at least these three values.. */ >> +static u64 a2xx_gpu_busy(struct msm_gpu *gpu, unsigned long *out_sample_rate) >> +{ >> + u64 busy_cycles; >> + >> + /* Freeze the counter */ >> + gpu_write(gpu, REG_A2XX_CP_PERFMON_CNTL, PERF_STATE_FREEZE); >> + >> + busy_cycles = gpu_read64(gpu, REG_A2XX_RBBM_PERFCOUNTER1_LO); >> + >> + /* Reset the counter */ >> + gpu_write(gpu, REG_A2XX_CP_PERFMON_CNTL, PERF_STATE_RESET); >> + >> + /* Re-enable the performance monitors */ >> + gpu_rmw(gpu, REG_A2XX_RBBM_PM_OVERRIDE2, BIT(6), BIT(6)); > > It's DEBUG_PERF_SCLK_PM_OVERRIDE > > See https://github.com/genesi/linux-legacy/blob/master/drivers/mxc/amd-gpu/include/reg/yamato/10/yamato_mask.h#L4428 I'll fix it up! Konrad > >> + gpu_write(gpu, REG_A2XX_RBBM_PERFCOUNTER1_SELECT, 1); >> + gpu_write(gpu, REG_A2XX_CP_PERFMON_CNTL, PERF_STATE_ENABLE); >> + >> + *out_sample_rate = clk_get_rate(gpu->core_clk); >> + >> + return busy_cycles; >> +} >> + >> static u32 a2xx_get_rptr(struct msm_gpu *gpu, struct msm_ringbuffer *ring) >> { >> ring->memptrs->rptr = gpu_read(gpu, REG_AXXX_CP_RB_RPTR); >> @@ -502,6 +525,7 @@ static const struct adreno_gpu_funcs funcs = { >> #if defined(CONFIG_DEBUG_FS) || defined(CONFIG_DEV_COREDUMP) >> .show = adreno_show, >> #endif >> + .gpu_busy = a2xx_gpu_busy, >> .gpu_state_get = a2xx_gpu_state_get, >> .gpu_state_put = adreno_gpu_state_put, >> .create_address_space = a2xx_create_address_space, >> >> -- >> 2.39.2 >> > >
diff --git a/drivers/gpu/drm/msm/adreno/a2xx_gpu.c b/drivers/gpu/drm/msm/adreno/a2xx_gpu.c index c67089a7ebc1..6f9876b37db5 100644 --- a/drivers/gpu/drm/msm/adreno/a2xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a2xx_gpu.c @@ -481,6 +481,29 @@ a2xx_create_address_space(struct msm_gpu *gpu, struct platform_device *pdev) return aspace; } +/* While the precise size of this field is unknown, it holds at least these three values.. */ +static u64 a2xx_gpu_busy(struct msm_gpu *gpu, unsigned long *out_sample_rate) +{ + u64 busy_cycles; + + /* Freeze the counter */ + gpu_write(gpu, REG_A2XX_CP_PERFMON_CNTL, PERF_STATE_FREEZE); + + busy_cycles = gpu_read64(gpu, REG_A2XX_RBBM_PERFCOUNTER1_LO); + + /* Reset the counter */ + gpu_write(gpu, REG_A2XX_CP_PERFMON_CNTL, PERF_STATE_RESET); + + /* Re-enable the performance monitors */ + gpu_rmw(gpu, REG_A2XX_RBBM_PM_OVERRIDE2, BIT(6), BIT(6)); + gpu_write(gpu, REG_A2XX_RBBM_PERFCOUNTER1_SELECT, 1); + gpu_write(gpu, REG_A2XX_CP_PERFMON_CNTL, PERF_STATE_ENABLE); + + *out_sample_rate = clk_get_rate(gpu->core_clk); + + return busy_cycles; +} + static u32 a2xx_get_rptr(struct msm_gpu *gpu, struct msm_ringbuffer *ring) { ring->memptrs->rptr = gpu_read(gpu, REG_AXXX_CP_RB_RPTR); @@ -502,6 +525,7 @@ static const struct adreno_gpu_funcs funcs = { #if defined(CONFIG_DEBUG_FS) || defined(CONFIG_DEV_COREDUMP) .show = adreno_show, #endif + .gpu_busy = a2xx_gpu_busy, .gpu_state_get = a2xx_gpu_state_get, .gpu_state_put = adreno_gpu_state_put, .create_address_space = a2xx_create_address_space,
Implement gpu_busy based on the downstream msm-3.4 code [1]. This allows us to use devfreq on this old old old hardware! [1] https://github.com/LineageOS/android_kernel_sony_apq8064/blob/lineage-16.0/drivers/gpu/msm/adreno_a2xx.c#L1975 Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- drivers/gpu/drm/msm/adreno/a2xx_gpu.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)