| Message ID | 20230217115036.2617396-3-nava.kishore.manne@amd.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Adds status interface for zynqmp-fpga | expand |
On 2023-02-17 at 17:20:36 +0530, Nava kishore Manne wrote: > Adds status interface for zynqmp-fpga, It's a read only interface s/,/. > which allows the user to get the Programmable Logic(PL) configuration > status. > > Usage: > To read the Programmable Logic(PL) configuration status > cat /sys/bus/platform/drivers/zynqmp_fpga_manager/ > firmware:zynqmp-firmware:pcap/status Don't wrap here. > > Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com> > --- > hanges for v2: > - Updated status messages handling logic as suggested by Xu Yilun. > > Changes for v3: > - Updated status interface handling logic (Restrict the status > interface to the device-specific instead of handled by the core) > as suggested by Xu Yilun. > > Changes for v4: > - Limit the error strings to one word for each as suggested by > Xu Yilun > > Changes for v5: > - Added new sysfs-driver-zynqmp-fpga file. > > Changes for v6: > - Updated the sysfs interface to cat /sys/bus/platform/drivers/... > as suggested by Xu Yilun. > - Exported raw hex value instead of multiple error strings > as suggested by Greg. > > .../ABI/testing/sysfs-driver-zynqmp-fpga | 72 +++++++++++++++++++ > drivers/fpga/zynqmp-fpga.c | 23 ++++++ > 2 files changed, 95 insertions(+) > create mode 100644 Documentation/ABI/testing/sysfs-driver-zynqmp-fpga > > diff --git a/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga > new file mode 100644 > index 000000000000..af5d42916dd1 > --- /dev/null > +++ b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga > @@ -0,0 +1,72 @@ > +What: /sys/bus/platform/drivers/zynqmp_fpga_manager/firmware:zynqmp-firmware:pcap/status > +Date: Jan 2023 > +KernelVersion: 6.2 Please update the version & Data, I expect this could be merged in next cycle, so 6.4 > +Contact: Nava kishore Manne <nava.kishore.manne@amd.com> > +Description: (RO) Read fpga status. > + Read returns a hexadecimal value that tells the current status > + of the FPGA device. Each bit position in the status value is > + described Below(see ug570 chapter 9). Please provide the URL for ug570, the commit message in Patch #0 that contains the info will not appear in mainline. > + > + ====================== ============================================== > + BIT(0) 0: No CRC error > + 1: CRC error > + > + BIT(1) 0: Decryptor security not set > + 1: Decryptor security set > + > + BIT(2) 0: MMCMs/PLLs are not locked > + 1: MMCMs/PLLs are locked > + > + BIT(3) 0: DCI not matched > + 1: DCI matched > + > + BIT(4) 0: Start-up sequence has not finished > + 1: Start-up sequence has finished > + > + BIT(5) 0: All I/Os are placed in High-Z state > + 1: All I/Os behave as configured > + > + BIT(6) 0: Flip-flops and block RAM are write disabled > + 1: Flip-flops and block RAM are write enabled > + > + BIT(7) 0: GHIGH_B_STATUS asserted > + 1: GHIGH_B_STATUS deasserted > + > + BIT(8) to BIT(10) Status of the mode pins > + > + BIT(11) 0: Initialization has not finished > + 1: Initialization finished > + > + BIT(12) Value on INIT_B_PIN pin > + > + BIT(13) 0: Signal not released > + 1: Signal released > + > + BIT(14) Value on DONE_PIN pin. > + > + BIT(15) 0: No IDCODE_ERROR > + 1: IDCODE_ERROR > + > + BIT(16) 0: No SECURITY_ERROR > + 1: SECURITY_ERROR > + > + BIT(17) System Monitor over-temperature if set > + > + BIT(18) to BIT(20) Start-up state machine (0 to 7) > + Phase 0 = 000 > + Phase 1 = 001 > + Phase 2 = 011 > + Phase 3 = 010 > + Phase 4 = 110 > + Phase 5 = 111 > + Phase 6 = 101 > + Phase 7 = 100 > + > + BIT(25) to BIT(26) Indicates the detected bus width > + 00 = x1 > + 01 = x8 > + 10 = x16 > + 11 = x32 > + ====================== ============================================== > + > + The other bits are reserved. > diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c > index c60f20949c47..0c58ca27319f 100644 > --- a/drivers/fpga/zynqmp-fpga.c > +++ b/drivers/fpga/zynqmp-fpga.c > @@ -77,6 +77,28 @@ static enum fpga_mgr_states zynqmp_fpga_ops_state(struct fpga_manager *mgr) > return FPGA_MGR_STATE_UNKNOWN; > } > > +static ssize_t status_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + u32 status; > + int ret; > + > + ret = zynqmp_pm_fpga_get_config_status(&status); > + if (ret) > + return ret; > + > + return sprintf(buf, "0x%x\n", status); sysfs_emit? > +} > + No blank line please. > +static DEVICE_ATTR_RO(status); > + > +static struct attribute *zynqmp_fpga_attrs[] = { > + &dev_attr_status.attr, > + NULL, > +}; > + Same. Thanks, Yilun > +ATTRIBUTE_GROUPS(zynqmp_fpga); > + > static const struct fpga_manager_ops zynqmp_fpga_ops = { > .state = zynqmp_fpga_ops_state, > .write_init = zynqmp_fpga_ops_write_init, > @@ -113,6 +135,7 @@ static struct platform_driver zynqmp_fpga_driver = { > .driver = { > .name = "zynqmp_fpga_manager", > .of_match_table = of_match_ptr(zynqmp_fpga_of_match), > + .dev_groups = zynqmp_fpga_groups, > }, > }; > > -- > 2.25.1 >
diff --git a/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga new file mode 100644 index 000000000000..af5d42916dd1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga @@ -0,0 +1,72 @@ +What: /sys/bus/platform/drivers/zynqmp_fpga_manager/firmware:zynqmp-firmware:pcap/status +Date: Jan 2023 +KernelVersion: 6.2 +Contact: Nava kishore Manne <nava.kishore.manne@amd.com> +Description: (RO) Read fpga status. + Read returns a hexadecimal value that tells the current status + of the FPGA device. Each bit position in the status value is + described Below(see ug570 chapter 9). + + ====================== ============================================== + BIT(0) 0: No CRC error + 1: CRC error + + BIT(1) 0: Decryptor security not set + 1: Decryptor security set + + BIT(2) 0: MMCMs/PLLs are not locked + 1: MMCMs/PLLs are locked + + BIT(3) 0: DCI not matched + 1: DCI matched + + BIT(4) 0: Start-up sequence has not finished + 1: Start-up sequence has finished + + BIT(5) 0: All I/Os are placed in High-Z state + 1: All I/Os behave as configured + + BIT(6) 0: Flip-flops and block RAM are write disabled + 1: Flip-flops and block RAM are write enabled + + BIT(7) 0: GHIGH_B_STATUS asserted + 1: GHIGH_B_STATUS deasserted + + BIT(8) to BIT(10) Status of the mode pins + + BIT(11) 0: Initialization has not finished + 1: Initialization finished + + BIT(12) Value on INIT_B_PIN pin + + BIT(13) 0: Signal not released + 1: Signal released + + BIT(14) Value on DONE_PIN pin. + + BIT(15) 0: No IDCODE_ERROR + 1: IDCODE_ERROR + + BIT(16) 0: No SECURITY_ERROR + 1: SECURITY_ERROR + + BIT(17) System Monitor over-temperature if set + + BIT(18) to BIT(20) Start-up state machine (0 to 7) + Phase 0 = 000 + Phase 1 = 001 + Phase 2 = 011 + Phase 3 = 010 + Phase 4 = 110 + Phase 5 = 111 + Phase 6 = 101 + Phase 7 = 100 + + BIT(25) to BIT(26) Indicates the detected bus width + 00 = x1 + 01 = x8 + 10 = x16 + 11 = x32 + ====================== ============================================== + + The other bits are reserved. diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c index c60f20949c47..0c58ca27319f 100644 --- a/drivers/fpga/zynqmp-fpga.c +++ b/drivers/fpga/zynqmp-fpga.c @@ -77,6 +77,28 @@ static enum fpga_mgr_states zynqmp_fpga_ops_state(struct fpga_manager *mgr) return FPGA_MGR_STATE_UNKNOWN; } +static ssize_t status_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 status; + int ret; + + ret = zynqmp_pm_fpga_get_config_status(&status); + if (ret) + return ret; + + return sprintf(buf, "0x%x\n", status); +} + +static DEVICE_ATTR_RO(status); + +static struct attribute *zynqmp_fpga_attrs[] = { + &dev_attr_status.attr, + NULL, +}; + +ATTRIBUTE_GROUPS(zynqmp_fpga); + static const struct fpga_manager_ops zynqmp_fpga_ops = { .state = zynqmp_fpga_ops_state, .write_init = zynqmp_fpga_ops_write_init, @@ -113,6 +135,7 @@ static struct platform_driver zynqmp_fpga_driver = { .driver = { .name = "zynqmp_fpga_manager", .of_match_table = of_match_ptr(zynqmp_fpga_of_match), + .dev_groups = zynqmp_fpga_groups, }, };
Adds status interface for zynqmp-fpga, It's a read only interface which allows the user to get the Programmable Logic(PL) configuration status. Usage: To read the Programmable Logic(PL) configuration status cat /sys/bus/platform/drivers/zynqmp_fpga_manager/ firmware:zynqmp-firmware:pcap/status Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com> --- hanges for v2: - Updated status messages handling logic as suggested by Xu Yilun. Changes for v3: - Updated status interface handling logic (Restrict the status interface to the device-specific instead of handled by the core) as suggested by Xu Yilun. Changes for v4: - Limit the error strings to one word for each as suggested by Xu Yilun Changes for v5: - Added new sysfs-driver-zynqmp-fpga file. Changes for v6: - Updated the sysfs interface to cat /sys/bus/platform/drivers/... as suggested by Xu Yilun. - Exported raw hex value instead of multiple error strings as suggested by Greg. .../ABI/testing/sysfs-driver-zynqmp-fpga | 72 +++++++++++++++++++ drivers/fpga/zynqmp-fpga.c | 23 ++++++ 2 files changed, 95 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-driver-zynqmp-fpga