| Message ID | 20221107072413.16178-2-nancy.lin@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add MediaTek SoC DRM (vdosys1) support for mt8195 | expand |
Hi, Nancy: I've lost the v29 mail, so I reply in this mail for v29. I got some message by make dt_binding_check. /home/chunkuang/git/linux/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.example.dtb: hdr-engine@1c114000: mediatek,gce-client-reg:0: [4294967295, 7, 16384, 4096, 4294967295, 7, 20480, 4096, 4294967295, 7, 28672, 4096, 4294967295, 7, 36864, 4096, 4294967295, 7, 40960, 4096, 4294967295, 7, 45056, 4096, 4294967295, 7, 49152, 4096] is too long From schema: /home/chunkuang/git/linux/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml /home/chunkuang/git/linux/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.example.dtb: hdr-engine@1c114000: mediatek,gce-client-reg: [[4294967295, 7, 16384, 4096, 4294967295, 7, 20480, 4096, 4294967295, 7, 28672, 4096, 4294967295, 7, 36864, 4096, 4294967295, 7, 40960, 4096, 4294967295, 7, 45056, 4096, 4294967295, 7, 49152, 4096]] is too short From schema: /home/chunkuang/git/linux/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml Regards, Chun-Kuang. Nancy.Lin <nancy.lin@mediatek.com> 於 2022年11月7日 週一 下午3:24寫道： > > Add vdosys1 ETHDR definition. > > Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com> > Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > --- > .../display/mediatek/mediatek,ethdr.yaml | 188 ++++++++++++++++++ > 1 file changed, 188 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml > new file mode 100644 > index 000000000000..3b11e47a8834 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml > @@ -0,0 +1,188 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/mediatek/mediatek,ethdr.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek Ethdr Device > + > +maintainers: > + - Chun-Kuang Hu <chunkuang.hu@kernel.org> > + - Philipp Zabel <p.zabel@pengutronix.de> > + > +description: > + ETHDR (ET High Dynamic Range) is a MediaTek internal HDR engine and is > + designed for HDR video and graphics conversion in the external display path. > + It handles multiple HDR input types and performs tone mapping, color > + space/color format conversion, and then combine different layers, > + output the required HDR or SDR signal to the subsequent display path. > + This engine is composed of two video frontends, two graphic frontends, > + one video backend and a mixer. ETHDR has two DMA function blocks, DS and ADL. > + These two function blocks read the pre-programmed registers from DRAM and > + set them to HW in the v-blanking period. > + > +properties: > + compatible: > + const: mediatek,mt8195-disp-ethdr > + > + reg: > + maxItems: 7 > + > + reg-names: > + items: > + - const: mixer > + - const: vdo_fe0 > + - const: vdo_fe1 > + - const: gfx_fe0 > + - const: gfx_fe1 > + - const: vdo_be > + - const: adl_ds > + > + interrupts: > + maxItems: 1 > + > + iommus: > + minItems: 1 > + maxItems: 2 > + > + clocks: > + items: > + - description: mixer clock > + - description: video frontend 0 clock > + - description: video frontend 1 clock > + - description: graphic frontend 0 clock > + - description: graphic frontend 1 clock > + - description: video backend clock > + - description: autodownload and menuload clock > + - description: video frontend 0 async clock > + - description: video frontend 1 async clock > + - description: graphic frontend 0 async clock > + - description: graphic frontend 1 async clock > + - description: video backend async clock > + - description: ethdr top clock > + > + clock-names: > + items: > + - const: mixer > + - const: vdo_fe0 > + - const: vdo_fe1 > + - const: gfx_fe0 > + - const: gfx_fe1 > + - const: vdo_be > + - const: adl_ds > + - const: vdo_fe0_async > + - const: vdo_fe1_async > + - const: gfx_fe0_async > + - const: gfx_fe1_async > + - const: vdo_be_async > + - const: ethdr_top > + > + power-domains: > + maxItems: 1 > + > + resets: > + items: > + - description: video frontend 0 async reset > + - description: video frontend 1 async reset > + - description: graphic frontend 0 async reset > + - description: graphic frontend 1 async reset > + - description: video backend async reset > + > + reset-names: > + items: > + - const: vdo_fe0_async > + - const: vdo_fe1_async > + - const: gfx_fe0_async > + - const: gfx_fe1_async > + - const: vdo_be_async > + > + mediatek,gce-client-reg: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: The register of display function block to be set by gce. > + There are 4 arguments in this property, gce node, subsys id, offset and > + register size. The subsys id is defined in the gce header of each chips > + include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display > + function block. > + items: > + items: > + - description: phandle of GCE > + - description: GCE subsys id > + - description: register offset > + - description: register size > + minItems: 7 > + maxItems: 7 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - interrupts > + - power-domains > + - resets > + - mediatek,gce-client-reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/mt8195-clk.h> > + #include <dt-bindings/gce/mt8195-gce.h> > + #include <dt-bindings/memory/mt8195-memory-port.h> > + #include <dt-bindings/power/mt8195-power.h> > + #include <dt-bindings/reset/mt8195-resets.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + hdr-engine@1c114000 { > + compatible = "mediatek,mt8195-disp-ethdr"; > + reg = <0 0x1c114000 0 0x1000>, > + <0 0x1c115000 0 0x1000>, > + <0 0x1c117000 0 0x1000>, > + <0 0x1c119000 0 0x1000>, > + <0 0x1c11a000 0 0x1000>, > + <0 0x1c11b000 0 0x1000>, > + <0 0x1c11c000 0 0x1000>; > + reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1", > + "vdo_be", "adl_ds"; > + mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>, > + <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>, > + <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>, > + <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>, > + <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>, > + <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>, > + <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>; > + clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>, > + <&vdosys1 CLK_VDO1_HDR_VDO_FE0>, > + <&vdosys1 CLK_VDO1_HDR_VDO_FE1>, > + <&vdosys1 CLK_VDO1_HDR_GFX_FE0>, > + <&vdosys1 CLK_VDO1_HDR_GFX_FE1>, > + <&vdosys1 CLK_VDO1_HDR_VDO_BE>, > + <&vdosys1 CLK_VDO1_26M_SLOW>, > + <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>, > + <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>, > + <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>, > + <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>, > + <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>, > + <&topckgen CLK_TOP_ETHDR>; > + clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1", > + "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async", > + "gfx_fe0_async", "gfx_fe1_async","vdo_be_async", > + "ethdr_top"; > + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; > + iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>, > + <&iommu_vpp M4U_PORT_L3_HDR_ADL>; > + interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */ > + resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>, > + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>, > + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>, > + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>, > + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>; > + reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async", > + "gfx_fe1_async", "vdo_be_async"; > + }; > + }; > +... > -- > 2.18.0 >
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml new file mode 100644 index 000000000000..3b11e47a8834 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,ethdr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Ethdr Device + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: + ETHDR (ET High Dynamic Range) is a MediaTek internal HDR engine and is + designed for HDR video and graphics conversion in the external display path. + It handles multiple HDR input types and performs tone mapping, color + space/color format conversion, and then combine different layers, + output the required HDR or SDR signal to the subsequent display path. + This engine is composed of two video frontends, two graphic frontends, + one video backend and a mixer. ETHDR has two DMA function blocks, DS and ADL. + These two function blocks read the pre-programmed registers from DRAM and + set them to HW in the v-blanking period. + +properties: + compatible: + const: mediatek,mt8195-disp-ethdr + + reg: + maxItems: 7 + + reg-names: + items: + - const: mixer + - const: vdo_fe0 + - const: vdo_fe1 + - const: gfx_fe0 + - const: gfx_fe1 + - const: vdo_be + - const: adl_ds + + interrupts: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 2 + + clocks: + items: + - description: mixer clock + - description: video frontend 0 clock + - description: video frontend 1 clock + - description: graphic frontend 0 clock + - description: graphic frontend 1 clock + - description: video backend clock + - description: autodownload and menuload clock + - description: video frontend 0 async clock + - description: video frontend 1 async clock + - description: graphic frontend 0 async clock + - description: graphic frontend 1 async clock + - description: video backend async clock + - description: ethdr top clock + + clock-names: + items: + - const: mixer + - const: vdo_fe0 + - const: vdo_fe1 + - const: gfx_fe0 + - const: gfx_fe1 + - const: vdo_be + - const: adl_ds + - const: vdo_fe0_async + - const: vdo_fe1_async + - const: gfx_fe0_async + - const: gfx_fe1_async + - const: vdo_be_async + - const: ethdr_top + + power-domains: + maxItems: 1 + + resets: + items: + - description: video frontend 0 async reset + - description: video frontend 1 async reset + - description: graphic frontend 0 async reset + - description: graphic frontend 1 async reset + - description: video backend async reset + + reset-names: + items: + - const: vdo_fe0_async + - const: vdo_fe1_async + - const: gfx_fe0_async + - const: gfx_fe1_async + - const: vdo_be_async + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: The register of display function block to be set by gce. + There are 4 arguments in this property, gce node, subsys id, offset and + register size. The subsys id is defined in the gce header of each chips + include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display + function block. + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + minItems: 7 + maxItems: 7 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - power-domains + - resets + - mediatek,gce-client-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + #include <dt-bindings/memory/mt8195-memory-port.h> + #include <dt-bindings/power/mt8195-power.h> + #include <dt-bindings/reset/mt8195-resets.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + hdr-engine@1c114000 { + compatible = "mediatek,mt8195-disp-ethdr"; + reg = <0 0x1c114000 0 0x1000>, + <0 0x1c115000 0 0x1000>, + <0 0x1c117000 0 0x1000>, + <0 0x1c119000 0 0x1000>, + <0 0x1c11a000 0 0x1000>, + <0 0x1c11b000 0 0x1000>, + <0 0x1c11c000 0 0x1000>; + reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1", + "vdo_be", "adl_ds"; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>; + clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE0>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE1>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE0>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE1>, + <&vdosys1 CLK_VDO1_HDR_VDO_BE>, + <&vdosys1 CLK_VDO1_26M_SLOW>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>, + <&topckgen CLK_TOP_ETHDR>; + clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1", + "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async", + "gfx_fe0_async", "gfx_fe1_async","vdo_be_async", + "ethdr_top"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>, + <&iommu_vpp M4U_PORT_L3_HDR_ADL>; + interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */ + resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>; + reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async", + "gfx_fe1_async", "vdo_be_async"; + }; + }; +...