| Message ID | 20230208124053.18533-1-quic_jinlmao@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | stm: class: Add MIPI OST protocol support | expand |
Hi Reviewers, Could you please help to review this patch ? Thanks Jinlong Mao On 2/8/2023 8:40 PM, Mao Jinlong wrote: > Add MIPI OST protocol support for stm to format the traces. > Framework copied from drivers/hwtracing/stm.p-sys-t.c as of > commit d69d5e83110f ("stm class: Add MIPI SyS-T protocol > support"). > > Signed-off-by: Tingwei Zhang <quic_tingweiz@quicinc.com> > Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com> > --- > drivers/hwtracing/stm/Kconfig | 14 +++++ > drivers/hwtracing/stm/Makefile | 2 + > drivers/hwtracing/stm/p_ost.c | 95 ++++++++++++++++++++++++++++++++++ > 3 files changed, 111 insertions(+) > create mode 100644 drivers/hwtracing/stm/p_ost.c > > diff --git a/drivers/hwtracing/stm/Kconfig b/drivers/hwtracing/stm/Kconfig > index aad594fe79cc..0b52901125f7 100644 > --- a/drivers/hwtracing/stm/Kconfig > +++ b/drivers/hwtracing/stm/Kconfig > @@ -41,6 +41,20 @@ config STM_PROTO_SYS_T > > If you don't know what this is, say N. > > +config STM_PROTO_OST > + tristate "MIPI OST STM framing protocol driver" > + default CONFIG_STM > + help > + This is an implementation of MIPI OST protocol to be used > + over the STP transport. In addition to the data payload, it > + also carries additional metadata for entity, better > + means of trace source identification, etc. > + > + The receiving side must be able to decode this protocol in > + addition to the MIPI STP, in order to extract the data. > + > + If you don't know what this is, say N. > + > config STM_DUMMY > tristate "Dummy STM driver" > help > diff --git a/drivers/hwtracing/stm/Makefile b/drivers/hwtracing/stm/Makefile > index 1692fcd29277..715fc721891e 100644 > --- a/drivers/hwtracing/stm/Makefile > +++ b/drivers/hwtracing/stm/Makefile > @@ -5,9 +5,11 @@ stm_core-y := core.o policy.o > > obj-$(CONFIG_STM_PROTO_BASIC) += stm_p_basic.o > obj-$(CONFIG_STM_PROTO_SYS_T) += stm_p_sys-t.o > +obj-$(CONFIG_STM_PROTO_OST) += stm_p_ost.o > > stm_p_basic-y := p_basic.o > stm_p_sys-t-y := p_sys-t.o > +stm_p_ost-y := p_ost.o > > obj-$(CONFIG_STM_DUMMY) += dummy_stm.o > > diff --git a/drivers/hwtracing/stm/p_ost.c b/drivers/hwtracing/stm/p_ost.c > new file mode 100644 > index 000000000000..2ca1a3fda57f > --- /dev/null > +++ b/drivers/hwtracing/stm/p_ost.c > @@ -0,0 +1,95 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copied from drivers/hwtracing/stm.p-sys-t.c as of commit d69d5e83110f > + * ("stm class: Add MIPI SyS-T protocol support"). > + * > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. > + * Copyright (c) 2020 The Linux Foundation. All rights reserved. > + * Copyright (c) 2018, Intel Corporation. > + * > + * MIPI OST framing protocol for STM devices. > + */ > + > +#include <linux/configfs.h> > +#include <linux/module.h> > +#include <linux/device.h> > +#include <linux/slab.h> > +#include <linux/stm.h> > +#include <linux/sched/clock.h> > +#include "stm.h" > + > +#define OST_TOKEN_STARTSIMPLE (0x10) > +#define OST_VERSION_MIPI1 (0x10 << 8) > +#define OST_ENTITY_FTRACE (0x01 << 16) > +#define OST_CONTROL_PROTOCOL (0x0 << 24) > + > +#define DATA_HEADER (OST_TOKEN_STARTSIMPLE | OST_VERSION_MIPI1 | \ > + OST_ENTITY_FTRACE | OST_CONTROL_PROTOCOL) > + > +#define STM_MAKE_VERSION(ma, mi) ((ma << 8) | mi) > +#define STM_HEADER_MAGIC (0x5953) > + > +static ssize_t notrace ost_write(struct stm_data *data, > + struct stm_output *output, unsigned int chan, > + const char *buf, size_t count) > +{ > + unsigned int c = output->channel + chan; > + unsigned int m = output->master; > + const unsigned char nil = 0; > + u32 header = DATA_HEADER; > + u8 trc_hdr[24]; > + ssize_t sz; > + > + /* > + * STP framing rules for OST frames: > + * * the first packet of the OST frame is marked; > + * * the last packet is a FLAG. > + */ > + /* Message layout: HEADER / DATA / TAIL */ > + /* HEADER */ > + > + sz = data->packet(data, m, c, STP_PACKET_DATA, STP_PACKET_MARKED, > + 4, (u8 *)&header); > + if (sz <= 0) > + return sz; > + *(uint16_t *)(trc_hdr) = STM_MAKE_VERSION(0, 3); > + *(uint16_t *)(trc_hdr + 2) = STM_HEADER_MAGIC; > + *(uint32_t *)(trc_hdr + 4) = raw_smp_processor_id(); > + *(uint64_t *)(trc_hdr + 8) = sched_clock(); > + *(uint64_t *)(trc_hdr + 16) = task_tgid_nr(get_current()); > + sz = stm_data_write(data, m, c, false, trc_hdr, sizeof(trc_hdr)); > + if (sz <= 0) > + return sz; > + > + /* DATA */ > + sz = stm_data_write(data, m, c, false, buf, count); > + > + /* TAIL */ > + if (sz > 0) > + data->packet(data, m, c, STP_PACKET_FLAG, > + STP_PACKET_TIMESTAMPED, 0, &nil); > + > + return sz; > +} > + > +static const struct stm_protocol_driver ost_pdrv = { > + .owner = THIS_MODULE, > + .name = "p_ost", > + .write = ost_write, > +}; > + > +static int ost_stm_init(void) > +{ > + return stm_register_protocol(&ost_pdrv); > +} > + > +static void ost_stm_exit(void) > +{ > + stm_unregister_protocol(&ost_pdrv); > +} > + > +module_init(ost_stm_init); > +module_exit(ost_stm_exit); > + > +MODULE_LICENSE("GPL"); > +MODULE_DESCRIPTION("MIPI Open System Trace STM framing protocol driver");
Mao Jinlong <quic_jinlmao@quicinc.com> writes: > Add MIPI OST protocol support for stm to format the traces. Missing an explanation of what OST is, what it's used for, how it is different from the SyS-T and others. > Framework copied from drivers/hwtracing/stm.p-sys-t.c as of You mean stm/p_sys-t.c. Also, it's not a framework, it's a driver. > commit d69d5e83110f ("stm class: Add MIPI SyS-T protocol > support"). Why is this significant? > diff --git a/drivers/hwtracing/stm/p_ost.c b/drivers/hwtracing/stm/p_ost.c > new file mode 100644 > index 000000000000..2ca1a3fda57f > --- /dev/null > +++ b/drivers/hwtracing/stm/p_ost.c > @@ -0,0 +1,95 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copied from drivers/hwtracing/stm.p-sys-t.c as of commit d69d5e83110f > + * ("stm class: Add MIPI SyS-T protocol support"). Same as in the commit message. [...] > +#define OST_TOKEN_STARTSIMPLE (0x10) > +#define OST_VERSION_MIPI1 (0x10 << 8) > +#define OST_ENTITY_FTRACE (0x01 << 16) > +#define OST_CONTROL_PROTOCOL (0x0 << 24) These could use an explanation. > +#define DATA_HEADER (OST_TOKEN_STARTSIMPLE | OST_VERSION_MIPI1 | \ > + OST_ENTITY_FTRACE | OST_CONTROL_PROTOCOL) Does this mean that everything is ftrace? Because it's not. > + > +#define STM_MAKE_VERSION(ma, mi) ((ma << 8) | mi) > +#define STM_HEADER_MAGIC (0x5953) > + > +static ssize_t notrace ost_write(struct stm_data *data, > + struct stm_output *output, unsigned int chan, > + const char *buf, size_t count) > +{ > + unsigned int c = output->channel + chan; > + unsigned int m = output->master; > + const unsigned char nil = 0; > + u32 header = DATA_HEADER; > + u8 trc_hdr[24]; > + ssize_t sz; > + > + /* > + * STP framing rules for OST frames: > + * * the first packet of the OST frame is marked; > + * * the last packet is a FLAG. Which in your case is also timestamped. > + */ > + /* Message layout: HEADER / DATA / TAIL */ > + /* HEADER */ > + > + sz = data->packet(data, m, c, STP_PACKET_DATA, STP_PACKET_MARKED, > + 4, (u8 *)&header); The /* HEADER */ comment applies to the above line, so it should probably be directly before it. > + if (sz <= 0) > + return sz; > + *(uint16_t *)(trc_hdr) = STM_MAKE_VERSION(0, 3); > + *(uint16_t *)(trc_hdr + 2) = STM_HEADER_MAGIC; > + *(uint32_t *)(trc_hdr + 4) = raw_smp_processor_id(); > + *(uint64_t *)(trc_hdr + 8) = sched_clock(); Why sched_clock()? It should, among other things, be called with interrupts disabled, which is not the case here. > + *(uint64_t *)(trc_hdr + 16) = task_tgid_nr(get_current()); Is there a reason why trc_hdr is not a struct? Thanks, -- Alex
Hi Alexande, On 3/3/2023 2:05 AM, Alexander Shishkin wrote: > Mao Jinlong <quic_jinlmao@quicinc.com> writes: > >> Add MIPI OST protocol support for stm to format the traces. > Missing an explanation of what OST is, what it's used for, how it is > different from the SyS-T and others. I will updae the explanation in next version. > >> Framework copied from drivers/hwtracing/stm.p-sys-t.c as of > You mean stm/p_sys-t.c. Also, it's not a framework, it's a driver. The driver refers to code structure of p_sys-t driver. So, add this comments after internal review. > >> commit d69d5e83110f ("stm class: Add MIPI SyS-T protocol >> support"). > Why is this significant? > >> diff --git a/drivers/hwtracing/stm/p_ost.c b/drivers/hwtracing/stm/p_ost.c >> new file mode 100644 >> index 000000000000..2ca1a3fda57f >> --- /dev/null >> +++ b/drivers/hwtracing/stm/p_ost.c >> @@ -0,0 +1,95 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * Copied from drivers/hwtracing/stm.p-sys-t.c as of commit d69d5e83110f >> + * ("stm class: Add MIPI SyS-T protocol support"). > Same as in the commit message. > > [...] > >> +#define OST_TOKEN_STARTSIMPLE (0x10) >> +#define OST_VERSION_MIPI1 (0x10 << 8) >> +#define OST_ENTITY_FTRACE (0x01 << 16) >> +#define OST_CONTROL_PROTOCOL (0x0 << 24) > These could use an explanation. I will add the explanation. >> +#define DATA_HEADER (OST_TOKEN_STARTSIMPLE | OST_VERSION_MIPI1 | \ >> + OST_ENTITY_FTRACE | OST_CONTROL_PROTOCOL) > Does this mean that everything is ftrace? Because it's not. Only ftrace is supported in p_ost now. Other header type will be added later. > >> + >> +#define STM_MAKE_VERSION(ma, mi) ((ma << 8) | mi) >> +#define STM_HEADER_MAGIC (0x5953) >> + >> +static ssize_t notrace ost_write(struct stm_data *data, >> + struct stm_output *output, unsigned int chan, >> + const char *buf, size_t count) >> +{ >> + unsigned int c = output->channel + chan; >> + unsigned int m = output->master; >> + const unsigned char nil = 0; >> + u32 header = DATA_HEADER; >> + u8 trc_hdr[24]; >> + ssize_t sz; >> + >> + /* >> + * STP framing rules for OST frames: >> + * * the first packet of the OST frame is marked; >> + * * the last packet is a FLAG. > Which in your case is also timestamped. I will add the comments. > >> + */ >> + /* Message layout: HEADER / DATA / TAIL */ >> + /* HEADER */ >> + >> + sz = data->packet(data, m, c, STP_PACKET_DATA, STP_PACKET_MARKED, >> + 4, (u8 *)&header); > The /* HEADER */ comment applies to the above line, so it should > probably be directly before it. Got it. > >> + if (sz <= 0) >> + return sz; >> + *(uint16_t *)(trc_hdr) = STM_MAKE_VERSION(0, 3); >> + *(uint16_t *)(trc_hdr + 2) = STM_HEADER_MAGIC; >> + *(uint32_t *)(trc_hdr + 4) = raw_smp_processor_id(); >> + *(uint64_t *)(trc_hdr + 8) = sched_clock(); > Why sched_clock()? It should, among other things, be called with > interrupts disabled, which is not the case here. I will check. If it is not necessary here, I will remove it. > >> + *(uint64_t *)(trc_hdr + 16) = task_tgid_nr(get_current()); > Is there a reason why trc_hdr is not a struct? No particular reason here. > > Thanks, > -- > Alex
On 3/7/2023 9:26 PM, Jinlong Mao wrote: > Hi Alexander, Sorry, correct the typo. > > On 3/3/2023 2:05 AM, Alexander Shishkin wrote: >> Mao Jinlong <quic_jinlmao@quicinc.com> writes: >> >>> Add MIPI OST protocol support for stm to format the traces. >> Missing an explanation of what OST is, what it's used for, how it is >> different from the SyS-T and others. > I will updae the explanation in next version. >> >>> Framework copied from drivers/hwtracing/stm.p-sys-t.c as of >> You mean stm/p_sys-t.c. Also, it's not a framework, it's a driver. > > The driver refers to code structure of p_sys-t driver. So, add this > comments after > internal review. > >> >>> commit d69d5e83110f ("stm class: Add MIPI SyS-T protocol >>> support"). >> Why is this significant? >> >>> diff --git a/drivers/hwtracing/stm/p_ost.c >>> b/drivers/hwtracing/stm/p_ost.c >>> new file mode 100644 >>> index 000000000000..2ca1a3fda57f >>> --- /dev/null >>> +++ b/drivers/hwtracing/stm/p_ost.c >>> @@ -0,0 +1,95 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copied from drivers/hwtracing/stm.p-sys-t.c as of commit >>> d69d5e83110f >>> + * ("stm class: Add MIPI SyS-T protocol support"). >> Same as in the commit message. >> >> [...] >> >>> +#define OST_TOKEN_STARTSIMPLE (0x10) >>> +#define OST_VERSION_MIPI1 (0x10 << 8) >>> +#define OST_ENTITY_FTRACE (0x01 << 16) >>> +#define OST_CONTROL_PROTOCOL (0x0 << 24) >> These could use an explanation. > I will add the explanation. >>> +#define DATA_HEADER (OST_TOKEN_STARTSIMPLE | OST_VERSION_MIPI1 | \ >>> + OST_ENTITY_FTRACE | OST_CONTROL_PROTOCOL) >> Does this mean that everything is ftrace? Because it's not. > Only ftrace is supported in p_ost now. Other header type will be added > later. >> >>> + >>> +#define STM_MAKE_VERSION(ma, mi) ((ma << 8) | mi) >>> +#define STM_HEADER_MAGIC (0x5953) >>> + >>> +static ssize_t notrace ost_write(struct stm_data *data, >>> + struct stm_output *output, unsigned int chan, >>> + const char *buf, size_t count) >>> +{ >>> + unsigned int c = output->channel + chan; >>> + unsigned int m = output->master; >>> + const unsigned char nil = 0; >>> + u32 header = DATA_HEADER; >>> + u8 trc_hdr[24]; >>> + ssize_t sz; >>> + >>> + /* >>> + * STP framing rules for OST frames: >>> + * * the first packet of the OST frame is marked; >>> + * * the last packet is a FLAG. >> Which in your case is also timestamped. > I will add the comments. >> >>> + */ >>> + /* Message layout: HEADER / DATA / TAIL */ >>> + /* HEADER */ >>> + >>> + sz = data->packet(data, m, c, STP_PACKET_DATA, STP_PACKET_MARKED, >>> + 4, (u8 *)&header); >> The /* HEADER */ comment applies to the above line, so it should >> probably be directly before it. > Got it. >> >>> + if (sz <= 0) >>> + return sz; >>> + *(uint16_t *)(trc_hdr) = STM_MAKE_VERSION(0, 3); >>> + *(uint16_t *)(trc_hdr + 2) = STM_HEADER_MAGIC; >>> + *(uint32_t *)(trc_hdr + 4) = raw_smp_processor_id(); >>> + *(uint64_t *)(trc_hdr + 8) = sched_clock(); >> Why sched_clock()? It should, among other things, be called with >> interrupts disabled, which is not the case here. > I will check. If it is not necessary here, I will remove it. >> >>> + *(uint64_t *)(trc_hdr + 16) = task_tgid_nr(get_current()); >> Is there a reason why trc_hdr is not a struct? > No particular reason here. >> >> Thanks, >> -- >> Alex
diff --git a/drivers/hwtracing/stm/Kconfig b/drivers/hwtracing/stm/Kconfig index aad594fe79cc..0b52901125f7 100644 --- a/drivers/hwtracing/stm/Kconfig +++ b/drivers/hwtracing/stm/Kconfig @@ -41,6 +41,20 @@ config STM_PROTO_SYS_T If you don't know what this is, say N. +config STM_PROTO_OST + tristate "MIPI OST STM framing protocol driver" + default CONFIG_STM + help + This is an implementation of MIPI OST protocol to be used + over the STP transport. In addition to the data payload, it + also carries additional metadata for entity, better + means of trace source identification, etc. + + The receiving side must be able to decode this protocol in + addition to the MIPI STP, in order to extract the data. + + If you don't know what this is, say N. + config STM_DUMMY tristate "Dummy STM driver" help diff --git a/drivers/hwtracing/stm/Makefile b/drivers/hwtracing/stm/Makefile index 1692fcd29277..715fc721891e 100644 --- a/drivers/hwtracing/stm/Makefile +++ b/drivers/hwtracing/stm/Makefile @@ -5,9 +5,11 @@ stm_core-y := core.o policy.o obj-$(CONFIG_STM_PROTO_BASIC) += stm_p_basic.o obj-$(CONFIG_STM_PROTO_SYS_T) += stm_p_sys-t.o +obj-$(CONFIG_STM_PROTO_OST) += stm_p_ost.o stm_p_basic-y := p_basic.o stm_p_sys-t-y := p_sys-t.o +stm_p_ost-y := p_ost.o obj-$(CONFIG_STM_DUMMY) += dummy_stm.o diff --git a/drivers/hwtracing/stm/p_ost.c b/drivers/hwtracing/stm/p_ost.c new file mode 100644 index 000000000000..2ca1a3fda57f --- /dev/null +++ b/drivers/hwtracing/stm/p_ost.c @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copied from drivers/hwtracing/stm.p-sys-t.c as of commit d69d5e83110f + * ("stm class: Add MIPI SyS-T protocol support"). + * + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2020 The Linux Foundation. All rights reserved. + * Copyright (c) 2018, Intel Corporation. + * + * MIPI OST framing protocol for STM devices. + */ + +#include <linux/configfs.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/slab.h> +#include <linux/stm.h> +#include <linux/sched/clock.h> +#include "stm.h" + +#define OST_TOKEN_STARTSIMPLE (0x10) +#define OST_VERSION_MIPI1 (0x10 << 8) +#define OST_ENTITY_FTRACE (0x01 << 16) +#define OST_CONTROL_PROTOCOL (0x0 << 24) + +#define DATA_HEADER (OST_TOKEN_STARTSIMPLE | OST_VERSION_MIPI1 | \ + OST_ENTITY_FTRACE | OST_CONTROL_PROTOCOL) + +#define STM_MAKE_VERSION(ma, mi) ((ma << 8) | mi) +#define STM_HEADER_MAGIC (0x5953) + +static ssize_t notrace ost_write(struct stm_data *data, + struct stm_output *output, unsigned int chan, + const char *buf, size_t count) +{ + unsigned int c = output->channel + chan; + unsigned int m = output->master; + const unsigned char nil = 0; + u32 header = DATA_HEADER; + u8 trc_hdr[24]; + ssize_t sz; + + /* + * STP framing rules for OST frames: + * * the first packet of the OST frame is marked; + * * the last packet is a FLAG. + */ + /* Message layout: HEADER / DATA / TAIL */ + /* HEADER */ + + sz = data->packet(data, m, c, STP_PACKET_DATA, STP_PACKET_MARKED, + 4, (u8 *)&header); + if (sz <= 0) + return sz; + *(uint16_t *)(trc_hdr) = STM_MAKE_VERSION(0, 3); + *(uint16_t *)(trc_hdr + 2) = STM_HEADER_MAGIC; + *(uint32_t *)(trc_hdr + 4) = raw_smp_processor_id(); + *(uint64_t *)(trc_hdr + 8) = sched_clock(); + *(uint64_t *)(trc_hdr + 16) = task_tgid_nr(get_current()); + sz = stm_data_write(data, m, c, false, trc_hdr, sizeof(trc_hdr)); + if (sz <= 0) + return sz; + + /* DATA */ + sz = stm_data_write(data, m, c, false, buf, count); + + /* TAIL */ + if (sz > 0) + data->packet(data, m, c, STP_PACKET_FLAG, + STP_PACKET_TIMESTAMPED, 0, &nil); + + return sz; +} + +static const struct stm_protocol_driver ost_pdrv = { + .owner = THIS_MODULE, + .name = "p_ost", + .write = ost_write, +}; + +static int ost_stm_init(void) +{ + return stm_register_protocol(&ost_pdrv); +} + +static void ost_stm_exit(void) +{ + stm_unregister_protocol(&ost_pdrv); +} + +module_init(ost_stm_init); +module_exit(ost_stm_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MIPI Open System Trace STM framing protocol driver");
Add MIPI OST protocol support for stm to format the traces. Framework copied from drivers/hwtracing/stm.p-sys-t.c as of commit d69d5e83110f ("stm class: Add MIPI SyS-T protocol support"). Signed-off-by: Tingwei Zhang <quic_tingweiz@quicinc.com> Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com> --- drivers/hwtracing/stm/Kconfig | 14 +++++ drivers/hwtracing/stm/Makefile | 2 + drivers/hwtracing/stm/p_ost.c | 95 ++++++++++++++++++++++++++++++++++ 3 files changed, 111 insertions(+) create mode 100644 drivers/hwtracing/stm/p_ost.c