Message ID | 20230222053153.3658345-7-suraj.kandpal@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Enable YCbCr420 format for VDSC | expand |
> -----Original Message----- > From: Kandpal, Suraj <suraj.kandpal@intel.com> > Sent: Wednesday, February 22, 2023 11:02 AM > To: dri-devel@lists.freedesktop.org; intel-gfx@lists.freedesktop.org > Cc: Shankar, Uma <uma.shankar@intel.com>; Nautiyal, Ankit K > <ankit.k.nautiyal@intel.com>; Kandpal, Suraj <suraj.kandpal@intel.com> > Subject: [PATCH 6/7] drm/i915/vdsc: Check slice design requirement > > Add function to check if slice design requirements are being met as defined in Bspec: > 49259 in the section Slice Design Requirement > > --v7 > -remove full bspec link [Jani] > -rename intel_dsc_check_slice_design_req to intel_dsc_slice_dimensions_valid > [Jani] > > --v8 > -fix condition to check if slice width and height are of two -fix minimum pixel in slice > condition > > --v10 > -condition should be < rather then >= [Uma] Looks Good to me. Reviewed-by: Uma Shankar <uma.shankar@intel.com> > Cc: Uma Shankar <uma.shankar@intel.com> > Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> > --- > drivers/gpu/drm/i915/display/intel_vdsc.c | 32 +++++++++++++++++++++++ > 1 file changed, 32 insertions(+) > > diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c > b/drivers/gpu/drm/i915/display/intel_vdsc.c > index 32997c9773aa..a9585f493318 100644 > --- a/drivers/gpu/drm/i915/display/intel_vdsc.c > +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c > @@ -447,6 +447,29 @@ calculate_rc_params(struct rc_parameters *rc, > } > } > > +static int intel_dsc_slice_dimensions_valid(struct intel_crtc_state *pipe_config, > + struct drm_dsc_config *vdsc_cfg) { > + if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_RGB || > + pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) { > + if (vdsc_cfg->slice_height > 4095) > + return -EINVAL; > + if (vdsc_cfg->slice_height * vdsc_cfg->slice_width < 15000) > + return -EINVAL; > + } else if (pipe_config->output_format == > INTEL_OUTPUT_FORMAT_YCBCR420) { > + if (vdsc_cfg->slice_width % 2) > + return -EINVAL; > + if (vdsc_cfg->slice_height % 2) > + return -EINVAL; > + if (vdsc_cfg->slice_height > 4094) > + return -EINVAL; > + if (vdsc_cfg->slice_height * vdsc_cfg->slice_width < 30000) > + return -EINVAL; > + } > + > + return 0; > +} > + > int intel_dsc_compute_params(struct intel_crtc_state *pipe_config) { > struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); > @@ -455,11 +478,20 @@ int intel_dsc_compute_params(struct intel_crtc_state > *pipe_config) > u16 compressed_bpp = pipe_config->dsc.compressed_bpp; > const struct rc_parameters *rc_params; > struct rc_parameters *rc = NULL; > + int err; > u8 i = 0; > > vdsc_cfg->pic_width = pipe_config->hw.adjusted_mode.crtc_hdisplay; > vdsc_cfg->slice_width = DIV_ROUND_UP(vdsc_cfg->pic_width, > pipe_config->dsc.slice_count); > + > + err = intel_dsc_slice_dimensions_valid(pipe_config, vdsc_cfg); > + > + if (err) { > + drm_dbg_kms(&dev_priv->drm, "Slice dimension requirements not > met\n"); > + return err; > + } > + > /* > * According to DSC 1.2 specs if colorspace is YCbCr then convert_rgb is 0 > * else 1 > -- > 2.25.1
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c index 32997c9773aa..a9585f493318 100644 --- a/drivers/gpu/drm/i915/display/intel_vdsc.c +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c @@ -447,6 +447,29 @@ calculate_rc_params(struct rc_parameters *rc, } } +static int intel_dsc_slice_dimensions_valid(struct intel_crtc_state *pipe_config, + struct drm_dsc_config *vdsc_cfg) +{ + if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_RGB || + pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) { + if (vdsc_cfg->slice_height > 4095) + return -EINVAL; + if (vdsc_cfg->slice_height * vdsc_cfg->slice_width < 15000) + return -EINVAL; + } else if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) { + if (vdsc_cfg->slice_width % 2) + return -EINVAL; + if (vdsc_cfg->slice_height % 2) + return -EINVAL; + if (vdsc_cfg->slice_height > 4094) + return -EINVAL; + if (vdsc_cfg->slice_height * vdsc_cfg->slice_width < 30000) + return -EINVAL; + } + + return 0; +} + int intel_dsc_compute_params(struct intel_crtc_state *pipe_config) { struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); @@ -455,11 +478,20 @@ int intel_dsc_compute_params(struct intel_crtc_state *pipe_config) u16 compressed_bpp = pipe_config->dsc.compressed_bpp; const struct rc_parameters *rc_params; struct rc_parameters *rc = NULL; + int err; u8 i = 0; vdsc_cfg->pic_width = pipe_config->hw.adjusted_mode.crtc_hdisplay; vdsc_cfg->slice_width = DIV_ROUND_UP(vdsc_cfg->pic_width, pipe_config->dsc.slice_count); + + err = intel_dsc_slice_dimensions_valid(pipe_config, vdsc_cfg); + + if (err) { + drm_dbg_kms(&dev_priv->drm, "Slice dimension requirements not met\n"); + return err; + } + /* * According to DSC 1.2 specs if colorspace is YCbCr then convert_rgb is 0 * else 1
Add function to check if slice design requirements are being met as defined in Bspec: 49259 in the section Slice Design Requirement --v7 -remove full bspec link [Jani] -rename intel_dsc_check_slice_design_req to intel_dsc_slice_dimensions_valid [Jani] --v8 -fix condition to check if slice width and height are of two -fix minimum pixel in slice condition --v10 -condition should be < rather then >= [Uma] Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> --- drivers/gpu/drm/i915/display/intel_vdsc.c | 32 +++++++++++++++++++++++ 1 file changed, 32 insertions(+)