| Message ID | 20230308051835.276552-1-s-vadapalli@ti.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net-next,v2] dt-bindings: net: ti: k3-am654-cpsw-nuss: Document Serdes PHY | expand |
On 08/03/2023 06:18, Siddharth Vadapalli wrote: > Update bindings to include Serdes PHY as an optional PHY, in addition to > the existing CPSW MAC's PHY. The CPSW MAC's PHY is required while the > Serdes PHY is optional. The Serdes PHY handle has to be provided only > when the Serdes is being configured in a Single-Link protocol. Using the > name "serdes-phy" to represent the Serdes PHY handle, the am65-cpsw-nuss > driver can obtain the Serdes PHY and request the Serdes to be > configured. > > Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> > --- > > Hello, > > This patch corresponds to the Serdes PHY bindings that were missed out in > the series at: > https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@ti.com/ > This was pointed out at: > https://lore.kernel.org/r/CAMuHMdW5atq-FuLEL3htuE3t2uO86anLL3zeY7n1RqqMP_rH1g@mail.gmail.com/ > > Changes from v1: > 1. Describe phys property with minItems, items and description. > 2. Use minItems and items in phy-names. > 3. Remove the description in phy-names. > > v1: > https://lore.kernel.org/r/20230306094750.159657-1-s-vadapalli@ti.com/ > > .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 14 ++++++++++++-- > 1 file changed, 12 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml > index 900063411a20..0fb48bb6a041 100644 > --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml > +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml > @@ -126,8 +126,18 @@ properties: > description: CPSW port number > > phys: > - maxItems: 1 > - description: phandle on phy-gmii-sel PHY > + minItems: 1 > + items: > + - description: CPSW MAC's PHY. > + - description: Serdes PHY. Serdes PHY is required only if > + the Serdes has to be configured in the > + Single-Link configuration. > + > + phy-names: > + minItems: 1 > + items: > + - const: mac-phy > + - const: serdes-phy Drop "phy" suffixes. Best regards, Krzysztof
Hello Krzysztof, On 08/03/23 14:04, Krzysztof Kozlowski wrote: > On 08/03/2023 06:18, Siddharth Vadapalli wrote: >> Update bindings to include Serdes PHY as an optional PHY, in addition to >> the existing CPSW MAC's PHY. The CPSW MAC's PHY is required while the >> Serdes PHY is optional. The Serdes PHY handle has to be provided only >> when the Serdes is being configured in a Single-Link protocol. Using the >> name "serdes-phy" to represent the Serdes PHY handle, the am65-cpsw-nuss >> driver can obtain the Serdes PHY and request the Serdes to be >> configured. >> >> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> >> --- >> >> Hello, >> >> This patch corresponds to the Serdes PHY bindings that were missed out in >> the series at: >> https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@ti.com/ >> This was pointed out at: >> https://lore.kernel.org/r/CAMuHMdW5atq-FuLEL3htuE3t2uO86anLL3zeY7n1RqqMP_rH1g@mail.gmail.com/ >> >> Changes from v1: >> 1. Describe phys property with minItems, items and description. >> 2. Use minItems and items in phy-names. >> 3. Remove the description in phy-names. >> >> v1: >> https://lore.kernel.org/r/20230306094750.159657-1-s-vadapalli@ti.com/ >> >> .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 14 ++++++++++++-- >> 1 file changed, 12 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >> index 900063411a20..0fb48bb6a041 100644 >> --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >> @@ -126,8 +126,18 @@ properties: >> description: CPSW port number >> >> phys: >> - maxItems: 1 >> - description: phandle on phy-gmii-sel PHY >> + minItems: 1 >> + items: >> + - description: CPSW MAC's PHY. >> + - description: Serdes PHY. Serdes PHY is required only if >> + the Serdes has to be configured in the >> + Single-Link configuration. >> + >> + phy-names: >> + minItems: 1 >> + items: >> + - const: mac-phy >> + - const: serdes-phy > > Drop "phy" suffixes. The am65-cpsw driver fetches the Serdes PHY by looking for the string "serdes-phy". Therefore, modifying the string will require changing the driver's code as well. Please let me know if it is absolutely necessary to drop the phy suffix. If so, I will post a new series with the changes involving dt-bindings changes and the driver changes. Regards, Siddharth.
On 08/03/2023 09:38, Siddharth Vadapalli wrote: > Hello Krzysztof, > > On 08/03/23 14:04, Krzysztof Kozlowski wrote: >> On 08/03/2023 06:18, Siddharth Vadapalli wrote: >>> Update bindings to include Serdes PHY as an optional PHY, in addition to >>> the existing CPSW MAC's PHY. The CPSW MAC's PHY is required while the >>> Serdes PHY is optional. The Serdes PHY handle has to be provided only >>> when the Serdes is being configured in a Single-Link protocol. Using the >>> name "serdes-phy" to represent the Serdes PHY handle, the am65-cpsw-nuss >>> driver can obtain the Serdes PHY and request the Serdes to be >>> configured. >>> >>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> >>> --- >>> >>> Hello, >>> >>> This patch corresponds to the Serdes PHY bindings that were missed out in >>> the series at: >>> https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@ti.com/ >>> This was pointed out at: >>> https://lore.kernel.org/r/CAMuHMdW5atq-FuLEL3htuE3t2uO86anLL3zeY7n1RqqMP_rH1g@mail.gmail.com/ >>> >>> Changes from v1: >>> 1. Describe phys property with minItems, items and description. >>> 2. Use minItems and items in phy-names. >>> 3. Remove the description in phy-names. >>> >>> v1: >>> https://lore.kernel.org/r/20230306094750.159657-1-s-vadapalli@ti.com/ >>> >>> .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 14 ++++++++++++-- >>> 1 file changed, 12 insertions(+), 2 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >>> index 900063411a20..0fb48bb6a041 100644 >>> --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >>> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >>> @@ -126,8 +126,18 @@ properties: >>> description: CPSW port number >>> >>> phys: >>> - maxItems: 1 >>> - description: phandle on phy-gmii-sel PHY >>> + minItems: 1 >>> + items: >>> + - description: CPSW MAC's PHY. >>> + - description: Serdes PHY. Serdes PHY is required only if >>> + the Serdes has to be configured in the >>> + Single-Link configuration. >>> + >>> + phy-names: >>> + minItems: 1 >>> + items: >>> + - const: mac-phy >>> + - const: serdes-phy >> >> Drop "phy" suffixes. > > The am65-cpsw driver fetches the Serdes PHY by looking for the string > "serdes-phy". Therefore, modifying the string will require changing the driver's > code as well. Please let me know if it is absolutely necessary to drop the phy > suffix. If so, I will post a new series with the changes involving dt-bindings > changes and the driver changes. Why the driver uses some properties before adding them to the binding? And is it correct method of adding ABI? You add incorrect properties without documentation and then use this as an argument "driver already does it"? Best regards, Krzysztof
Hello Krzysztof, On 08/03/23 18:04, Krzysztof Kozlowski wrote: > On 08/03/2023 09:38, Siddharth Vadapalli wrote: >> Hello Krzysztof, >> >> On 08/03/23 14:04, Krzysztof Kozlowski wrote: >>> On 08/03/2023 06:18, Siddharth Vadapalli wrote: >>>> Update bindings to include Serdes PHY as an optional PHY, in addition to >>>> the existing CPSW MAC's PHY. The CPSW MAC's PHY is required while the >>>> Serdes PHY is optional. The Serdes PHY handle has to be provided only >>>> when the Serdes is being configured in a Single-Link protocol. Using the >>>> name "serdes-phy" to represent the Serdes PHY handle, the am65-cpsw-nuss >>>> driver can obtain the Serdes PHY and request the Serdes to be >>>> configured. >>>> >>>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> >>>> --- >>>> >>>> Hello, >>>> >>>> This patch corresponds to the Serdes PHY bindings that were missed out in >>>> the series at: >>>> https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@ti.com/ >>>> This was pointed out at: >>>> https://lore.kernel.org/r/CAMuHMdW5atq-FuLEL3htuE3t2uO86anLL3zeY7n1RqqMP_rH1g@mail.gmail.com/ >>>> >>>> Changes from v1: >>>> 1. Describe phys property with minItems, items and description. >>>> 2. Use minItems and items in phy-names. >>>> 3. Remove the description in phy-names. >>>> >>>> v1: >>>> https://lore.kernel.org/r/20230306094750.159657-1-s-vadapalli@ti.com/ >>>> >>>> .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 14 ++++++++++++-- >>>> 1 file changed, 12 insertions(+), 2 deletions(-) >>>> >>>> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >>>> index 900063411a20..0fb48bb6a041 100644 >>>> --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >>>> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >>>> @@ -126,8 +126,18 @@ properties: >>>> description: CPSW port number >>>> >>>> phys: >>>> - maxItems: 1 >>>> - description: phandle on phy-gmii-sel PHY >>>> + minItems: 1 >>>> + items: >>>> + - description: CPSW MAC's PHY. >>>> + - description: Serdes PHY. Serdes PHY is required only if >>>> + the Serdes has to be configured in the >>>> + Single-Link configuration. >>>> + >>>> + phy-names: >>>> + minItems: 1 >>>> + items: >>>> + - const: mac-phy >>>> + - const: serdes-phy >>> >>> Drop "phy" suffixes. >> >> The am65-cpsw driver fetches the Serdes PHY by looking for the string >> "serdes-phy". Therefore, modifying the string will require changing the driver's >> code as well. Please let me know if it is absolutely necessary to drop the phy >> suffix. If so, I will post a new series with the changes involving dt-bindings >> changes and the driver changes. > > Why the driver uses some properties before adding them to the binding? I missed adding the bindings for the Serdes PHY as a part of the series mentioned in the section below the tearline of the patch. With this patch, I am attempting to fix it. > > And is it correct method of adding ABI? You add incorrect properties > without documentation and then use this as an argument "driver already > does it"? I apologize if my earlier comment appeared to justify the usage of "serdes-phy" based on the driver already using it. I did not mean it in that sense. I simply meant to ask if dropping "phy" suffixes was a suggestion or a rule. In that context, I felt that if it was a suggestion, I would prefer retaining the names with the "phy" suffixes, since the driver is already using it. Additionally, I also mentioned in my earlier comment that if it is necessary to drop the "phy" suffix, then I will do so and add another patch to change the string the driver looks for as well. I shall take it that dropping "phy" suffixes is a rule/necessity. With this, I will post the v3 series making this change, along with the patch to update the string the driver looks for. Regards, Siddharth.
On 09/03/2023 05:18, Siddharth Vadapalli wrote: > Hello Krzysztof, > > On 08/03/23 18:04, Krzysztof Kozlowski wrote: >> On 08/03/2023 09:38, Siddharth Vadapalli wrote: >>> Hello Krzysztof, >>> >>> On 08/03/23 14:04, Krzysztof Kozlowski wrote: >>>> On 08/03/2023 06:18, Siddharth Vadapalli wrote: >>>>> Update bindings to include Serdes PHY as an optional PHY, in addition to >>>>> the existing CPSW MAC's PHY. The CPSW MAC's PHY is required while the >>>>> Serdes PHY is optional. The Serdes PHY handle has to be provided only >>>>> when the Serdes is being configured in a Single-Link protocol. Using the >>>>> name "serdes-phy" to represent the Serdes PHY handle, the am65-cpsw-nuss >>>>> driver can obtain the Serdes PHY and request the Serdes to be >>>>> configured. >>>>> >>>>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> >>>>> --- >>>>> >>>>> Hello, >>>>> >>>>> This patch corresponds to the Serdes PHY bindings that were missed out in >>>>> the series at: >>>>> https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@ti.com/ >>>>> This was pointed out at: >>>>> https://lore.kernel.org/r/CAMuHMdW5atq-FuLEL3htuE3t2uO86anLL3zeY7n1RqqMP_rH1g@mail.gmail.com/ >>>>> >>>>> Changes from v1: >>>>> 1. Describe phys property with minItems, items and description. >>>>> 2. Use minItems and items in phy-names. >>>>> 3. Remove the description in phy-names. >>>>> >>>>> v1: >>>>> https://lore.kernel.org/r/20230306094750.159657-1-s-vadapalli@ti.com/ >>>>> >>>>> .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 14 ++++++++++++-- >>>>> 1 file changed, 12 insertions(+), 2 deletions(-) >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >>>>> index 900063411a20..0fb48bb6a041 100644 >>>>> --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >>>>> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >>>>> @@ -126,8 +126,18 @@ properties: >>>>> description: CPSW port number >>>>> >>>>> phys: >>>>> - maxItems: 1 >>>>> - description: phandle on phy-gmii-sel PHY >>>>> + minItems: 1 >>>>> + items: >>>>> + - description: CPSW MAC's PHY. >>>>> + - description: Serdes PHY. Serdes PHY is required only if >>>>> + the Serdes has to be configured in the >>>>> + Single-Link configuration. >>>>> + >>>>> + phy-names: >>>>> + minItems: 1 >>>>> + items: >>>>> + - const: mac-phy >>>>> + - const: serdes-phy >>>> >>>> Drop "phy" suffixes. >>> >>> The am65-cpsw driver fetches the Serdes PHY by looking for the string >>> "serdes-phy". Therefore, modifying the string will require changing the driver's >>> code as well. Please let me know if it is absolutely necessary to drop the phy >>> suffix. If so, I will post a new series with the changes involving dt-bindings >>> changes and the driver changes. >> >> Why the driver uses some properties before adding them to the binding? > > I missed adding the bindings for the Serdes PHY as a part of the series > mentioned in the section below the tearline of the patch. With this patch, I am > attempting to fix it. > >> >> And is it correct method of adding ABI? You add incorrect properties >> without documentation and then use this as an argument "driver already >> does it"? > > I apologize if my earlier comment appeared to justify the usage of "serdes-phy" > based on the driver already using it. I did not mean it in that sense. I simply > meant to ask if dropping "phy" suffixes was a suggestion or a rule. In that > context, I felt that if it was a suggestion, I would prefer retaining the names > with the "phy" suffixes, since the driver is already using it. Additionally, I > also mentioned in my earlier comment that if it is necessary to drop the "phy" > suffix, then I will do so and add another patch to change the string the driver > looks for as well. > > I shall take it that dropping "phy" suffixes is a rule/necessity. With this, I > will post the v3 series making this change, along with the patch to update the > string the driver looks for. Drop the "phy" suffix. It's a new binding. "phy" as suffix for "phy" is useless and for new bindings it should be dropped. If you submitted driver changes without bindings, which document the ABI, it's not good, but also not a reason for me for exceptions. Best regards, Krzysztof
Hello Krzysztof, On 09/03/23 11:51, Krzysztof Kozlowski wrote: > On 09/03/2023 05:18, Siddharth Vadapalli wrote: >> Hello Krzysztof, >> >> On 08/03/23 18:04, Krzysztof Kozlowski wrote: >>> On 08/03/2023 09:38, Siddharth Vadapalli wrote: >>>> Hello Krzysztof, >>>> >>>> On 08/03/23 14:04, Krzysztof Kozlowski wrote: >>>>> On 08/03/2023 06:18, Siddharth Vadapalli wrote: >>>>>> Update bindings to include Serdes PHY as an optional PHY, in addition to >>>>>> the existing CPSW MAC's PHY. The CPSW MAC's PHY is required while the >>>>>> Serdes PHY is optional. The Serdes PHY handle has to be provided only >>>>>> when the Serdes is being configured in a Single-Link protocol. Using the >>>>>> name "serdes-phy" to represent the Serdes PHY handle, the am65-cpsw-nuss >>>>>> driver can obtain the Serdes PHY and request the Serdes to be >>>>>> configured. >>>>>> >>>>>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> >>>>>> --- >>>>>> >>>>>> Hello, >>>>>> >>>>>> This patch corresponds to the Serdes PHY bindings that were missed out in >>>>>> the series at: >>>>>> https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@ti.com/ >>>>>> This was pointed out at: >>>>>> https://lore.kernel.org/r/CAMuHMdW5atq-FuLEL3htuE3t2uO86anLL3zeY7n1RqqMP_rH1g@mail.gmail.com/ >>>>>> >>>>>> Changes from v1: >>>>>> 1. Describe phys property with minItems, items and description. >>>>>> 2. Use minItems and items in phy-names. >>>>>> 3. Remove the description in phy-names. >>>>>> >>>>>> v1: >>>>>> https://lore.kernel.org/r/20230306094750.159657-1-s-vadapalli@ti.com/ >>>>>> >>>>>> .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 14 ++++++++++++-- >>>>>> 1 file changed, 12 insertions(+), 2 deletions(-) >>>>>> >>>>>> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >>>>>> index 900063411a20..0fb48bb6a041 100644 >>>>>> --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >>>>>> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml >>>>>> @@ -126,8 +126,18 @@ properties: >>>>>> description: CPSW port number >>>>>> >>>>>> phys: >>>>>> - maxItems: 1 >>>>>> - description: phandle on phy-gmii-sel PHY >>>>>> + minItems: 1 >>>>>> + items: >>>>>> + - description: CPSW MAC's PHY. >>>>>> + - description: Serdes PHY. Serdes PHY is required only if >>>>>> + the Serdes has to be configured in the >>>>>> + Single-Link configuration. >>>>>> + >>>>>> + phy-names: >>>>>> + minItems: 1 >>>>>> + items: >>>>>> + - const: mac-phy >>>>>> + - const: serdes-phy >>>>> >>>>> Drop "phy" suffixes. >>>> >>>> The am65-cpsw driver fetches the Serdes PHY by looking for the string >>>> "serdes-phy". Therefore, modifying the string will require changing the driver's >>>> code as well. Please let me know if it is absolutely necessary to drop the phy >>>> suffix. If so, I will post a new series with the changes involving dt-bindings >>>> changes and the driver changes. >>> >>> Why the driver uses some properties before adding them to the binding? >> >> I missed adding the bindings for the Serdes PHY as a part of the series >> mentioned in the section below the tearline of the patch. With this patch, I am >> attempting to fix it. >> >>> >>> And is it correct method of adding ABI? You add incorrect properties >>> without documentation and then use this as an argument "driver already >>> does it"? >> >> I apologize if my earlier comment appeared to justify the usage of "serdes-phy" >> based on the driver already using it. I did not mean it in that sense. I simply >> meant to ask if dropping "phy" suffixes was a suggestion or a rule. In that >> context, I felt that if it was a suggestion, I would prefer retaining the names >> with the "phy" suffixes, since the driver is already using it. Additionally, I >> also mentioned in my earlier comment that if it is necessary to drop the "phy" >> suffix, then I will do so and add another patch to change the string the driver >> looks for as well. >> >> I shall take it that dropping "phy" suffixes is a rule/necessity. With this, I >> will post the v3 series making this change, along with the patch to update the >> string the driver looks for. > > Drop the "phy" suffix. > > It's a new binding. "phy" as suffix for "phy" is useless and for new > bindings it should be dropped. If you submitted driver changes without > bindings, which document the ABI, it's not good, but also not a reason > for me for exceptions. Thank you for clarifying. I will post the v3 series dropping the "phy" suffix and also include the patch to change the name used in the driver to refer to the Serdes PHY. Regards, Siddharth.
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 900063411a20..0fb48bb6a041 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -126,8 +126,18 @@ properties: description: CPSW port number phys: - maxItems: 1 - description: phandle on phy-gmii-sel PHY + minItems: 1 + items: + - description: CPSW MAC's PHY. + - description: Serdes PHY. Serdes PHY is required only if + the Serdes has to be configured in the + Single-Link configuration. + + phy-names: + minItems: 1 + items: + - const: mac-phy + - const: serdes-phy label: description: label associated with this port
Update bindings to include Serdes PHY as an optional PHY, in addition to the existing CPSW MAC's PHY. The CPSW MAC's PHY is required while the Serdes PHY is optional. The Serdes PHY handle has to be provided only when the Serdes is being configured in a Single-Link protocol. Using the name "serdes-phy" to represent the Serdes PHY handle, the am65-cpsw-nuss driver can obtain the Serdes PHY and request the Serdes to be configured. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> --- Hello, This patch corresponds to the Serdes PHY bindings that were missed out in the series at: https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@ti.com/ This was pointed out at: https://lore.kernel.org/r/CAMuHMdW5atq-FuLEL3htuE3t2uO86anLL3zeY7n1RqqMP_rH1g@mail.gmail.com/ Changes from v1: 1. Describe phys property with minItems, items and description. 2. Use minItems and items in phy-names. 3. Remove the description in phy-names. v1: https://lore.kernel.org/r/20230306094750.159657-1-s-vadapalli@ti.com/ .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)