Message ID | 8f139c773de274311c8ca63a47d6b207c30913e2.1677150607.git.chiaen_wu@richtek.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Add MediaTek MT6370 PMIC support | expand |
Il 23/02/23 12:23, ChiaEn Wu ha scritto: > From: ChiYuan Huang <cy_huang@richtek.com> > > The MediaTek MT6370 is a highly-integrated smart power management IC, > which includes a single cell Li-Ion/Li-Polymer switching battery > charger, a USB Type-C & Power Delivery (PD) controller, dual > Flash LED current sources, a RGB LED driver, a backlight WLED driver, > a display bias driver and a general LDO for portable devices. > > Add support for the MediaTek MT6370 Current Sink Type LED Indicator > driver. It can control four channels current-sink RGB LEDs with 3 modes: > constant current, PWM, and breath mode. > > Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> > Co-developed-by: Alice Chen <alice_chen@richtek.com> > Signed-off-by: Alice Chen <alice_chen@richtek.com> > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> > Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
On Thu, 23 Feb 2023, ChiaEn Wu wrote: > From: ChiYuan Huang <cy_huang@richtek.com> > > The MediaTek MT6370 is a highly-integrated smart power management IC, > which includes a single cell Li-Ion/Li-Polymer switching battery > charger, a USB Type-C & Power Delivery (PD) controller, dual > Flash LED current sources, a RGB LED driver, a backlight WLED driver, > a display bias driver and a general LDO for portable devices. > > Add support for the MediaTek MT6370 Current Sink Type LED Indicator > driver. It can control four channels current-sink RGB LEDs with 3 modes: > constant current, PWM, and breath mode. > > Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> > Co-developed-by: Alice Chen <alice_chen@richtek.com> > Signed-off-by: Alice Chen <alice_chen@richtek.com> > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> > Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> > --- > v17 > - Update the year of Copyright from 2022 to 2023 > > --- > drivers/leds/rgb/Kconfig | 13 + > drivers/leds/rgb/Makefile | 1 + > drivers/leds/rgb/leds-mt6370-rgb.c | 1009 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 1023 insertions(+) > create mode 100644 drivers/leds/rgb/leds-mt6370-rgb.c In generally, this is really nicely done. Great job. Just a few niggles, then you'll be good to go. > diff --git a/drivers/leds/rgb/Kconfig b/drivers/leds/rgb/Kconfig > index 204cf47..7d86bb2 100644 > --- a/drivers/leds/rgb/Kconfig > +++ b/drivers/leds/rgb/Kconfig > @@ -26,4 +26,17 @@ config LEDS_QCOM_LPG > > If compiled as a module, the module will be named leds-qcom-lpg. > > +config LEDS_MT6370_RGB > + tristate "LED Support for MediaTek MT6370 PMIC" > + depends on MFD_MT6370 > + select LINEAR_RANGE > + help > + Say Y here to enable support for MT6370_RGB LED device. > + In MT6370, there are four channel current-sink LED drivers that > + support hardware pattern for constant current, PWM, and breath mode. > + Isink4 channel can also be used as a CHG_VIN power good indicator. > + > + This driver can also be built as a module. If so, the module > + will be called "leds-mt6370-rgb". > + > endif # LEDS_CLASS_MULTICOLOR > diff --git a/drivers/leds/rgb/Makefile b/drivers/leds/rgb/Makefile > index 0675bc0..8c01daf 100644 > --- a/drivers/leds/rgb/Makefile > +++ b/drivers/leds/rgb/Makefile > @@ -2,3 +2,4 @@ > > obj-$(CONFIG_LEDS_PWM_MULTICOLOR) += leds-pwm-multicolor.o > obj-$(CONFIG_LEDS_QCOM_LPG) += leds-qcom-lpg.o > +obj-$(CONFIG_LEDS_MT6370_RGB) += leds-mt6370-rgb.o > diff --git a/drivers/leds/rgb/leds-mt6370-rgb.c b/drivers/leds/rgb/leds-mt6370-rgb.c > new file mode 100644 > index 00000000..185d5d7 > --- /dev/null > +++ b/drivers/leds/rgb/leds-mt6370-rgb.c > @@ -0,0 +1,1009 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (C) 2023 Richtek Technology Corp. > + * > + * Authors: > + * ChiYuan Huang <cy_huang@richtek.com> > + * Alice Chen <alice_chen@richtek.com> > + */ > + > +#include <linux/bitops.h> > +#include <linux/kernel.h> > +#include <linux/leds.h> > +#include <linux/led-class-multicolor.h> > +#include <linux/linear_range.h> > +#include <linux/mod_devicetable.h> > +#include <linux/module.h> > +#include <linux/mutex.h> > +#include <linux/platform_device.h> > +#include <linux/property.h> > +#include <linux/regmap.h> > +#include <linux/util_macros.h> > + > +#include <asm/unaligned.h> > + > +enum { > + MT6370_LED_ISNK1 = 0, > + MT6370_LED_ISNK2, > + MT6370_LED_ISNK3, > + MT6370_LED_ISNK4, > + MT6370_MAX_LEDS > +}; > + > +enum mt6370_led_mode { > + MT6370_LED_PWM_MODE = 0, > + MT6370_LED_BREATH_MODE, > + MT6370_LED_REG_MODE, > + MT6370_LED_MAX_MODE > +}; > + > +enum mt6370_led_field { > + F_RGB_EN = 0, > + F_CHGIND_EN, > + F_LED1_CURR, > + F_LED2_CURR, > + F_LED3_CURR, > + F_LED4_CURR, > + F_LED1_MODE, > + F_LED2_MODE, > + F_LED3_MODE, > + F_LED4_MODE, > + F_LED1_DUTY, > + F_LED2_DUTY, > + F_LED3_DUTY, > + F_LED4_DUTY, > + F_LED1_FREQ, > + F_LED2_FREQ, > + F_LED3_FREQ, > + F_LED4_FREQ, > + F_MAX_FIELDS > +}; > + > +enum mt6370_led_ranges { > + R_LED123_CURR = 0, > + R_LED4_CURR, > + R_LED_TRFON, > + R_LED_TOFF, > + R_MAX_RANGES > +}; > + > +enum mt6370_pattern { > + P_LED_TR1 = 0, > + P_LED_TR2, > + P_LED_TF1, > + P_LED_TF2, > + P_LED_TON, > + P_LED_TOFF, > + P_MAX_PATTERNS > +}; > + > +#define MT6370_REG_DEV_INFO 0x100 > +#define MT6370_REG_RGB1_DIM 0x182 > +#define MT6370_REG_RGB2_DIM 0x183 > +#define MT6370_REG_RGB3_DIM 0x184 > +#define MT6370_REG_RGB_EN 0x185 > +#define MT6370_REG_RGB1_ISNK 0x186 > +#define MT6370_REG_RGB2_ISNK 0x187 > +#define MT6370_REG_RGB3_ISNK 0x188 > +#define MT6370_REG_RGB1_TR 0x189 > +#define MT6370_REG_RGB_CHRIND_DIM 0x192 > +#define MT6370_REG_RGB_CHRIND_CTRL 0x193 > +#define MT6370_REG_RGB_CHRIND_TR 0x194 > + > +#define MT6372_REG_RGB_EN 0x182 > +#define MT6372_REG_RGB1_ISNK 0x183 > +#define MT6372_REG_RGB2_ISNK 0x184 > +#define MT6372_REG_RGB3_ISNK 0x185 > +#define MT6372_REG_RGB4_ISNK 0x186 > +#define MT6372_REG_RGB1_DIM 0x187 > +#define MT6372_REG_RGB2_DIM 0x188 > +#define MT6372_REG_RGB3_DIM 0x189 > +#define MT6372_REG_RGB4_DIM 0x18A > +#define MT6372_REG_RGB12_FREQ 0x18B > +#define MT6372_REG_RGB34_FREQ 0x18C > +#define MT6372_REG_RGB1_TR 0x18D > + > +#define MT6370_VENID_MASK GENMASK(7, 4) Vendor? Defines should be self documenting. What does this save over "VENDOR_ID"? > +#define MT6370_CHEN_BIT(id) BIT(MT6370_LED_ISNK4 - id) > +#define MT6370_VIRTUAL_MULTICOLOR 5 > +#define MC_CHANNEL_NUM 3 > +#define MT6370_PWM_DUTY (BIT(5) - 1) > +#define MT6372_PWM_DUTY (BIT(8) - 1) > + > +struct mt6370_led { > + /* > + * If the color of the LED in DT is set to > + * - 'LED_COLOR_ID_RGB' > + * - 'LED_COLOR_ID_MULTI' > + * The member 'index' of this struct will be set to > + * 'MT6370_VIRTUAL_MULTICOLOR'. > + * If so, this LED will choose 'struct led_classdev_mc mc' to use. > + * Instead, if the member 'index' of this struct is set to > + * 'MT6370_LED_ISNK1' ~ 'MT6370_LED_ISNK4', then this LED will choose > + * 'struct led_classdev isink' to use. > + */ > + union { > + struct led_classdev isink; > + struct led_classdev_mc mc; > + }; > + struct mt6370_priv *priv; > + enum led_default_state default_state; > + u32 index; > +}; > + > +struct mt6370_pdata { > + const unsigned int *tfreq; > + unsigned int tfreq_len; > + u16 reg_rgb1_tr; > + s16 reg_rgb_chrind_tr; > + u8 pwm_duty; > +}; > + > +struct mt6370_priv { > + /* Per LED access lock */ > + struct mutex lock; > + struct regmap *regmap; > + struct regmap_field *fields[F_MAX_FIELDS]; > + const struct reg_field *reg_fields; > + const struct linear_range *ranges; > + struct reg_cfg *reg_cfgs; > + const struct mt6370_pdata *pdata; > + unsigned int leds_count; > + unsigned int leds_active; > + struct mt6370_led leds[]; > +}; > + > +static const struct reg_field common_reg_fields[F_MAX_FIELDS] = { > + [F_RGB_EN] = REG_FIELD(MT6370_REG_RGB_EN, 4, 7), > + [F_CHGIND_EN] = REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 7, 7), > + [F_LED1_CURR] = REG_FIELD(MT6370_REG_RGB1_ISNK, 0, 2), > + [F_LED2_CURR] = REG_FIELD(MT6370_REG_RGB2_ISNK, 0, 2), > + [F_LED3_CURR] = REG_FIELD(MT6370_REG_RGB3_ISNK, 0, 2), > + [F_LED4_CURR] = REG_FIELD(MT6370_REG_RGB_CHRIND_CTRL, 0, 1), > + [F_LED1_MODE] = REG_FIELD(MT6370_REG_RGB1_DIM, 5, 6), > + [F_LED2_MODE] = REG_FIELD(MT6370_REG_RGB2_DIM, 5, 6), > + [F_LED3_MODE] = REG_FIELD(MT6370_REG_RGB3_DIM, 5, 6), > + [F_LED4_MODE] = REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 5, 6), > + [F_LED1_DUTY] = REG_FIELD(MT6370_REG_RGB1_DIM, 0, 4), > + [F_LED2_DUTY] = REG_FIELD(MT6370_REG_RGB2_DIM, 0, 4), > + [F_LED3_DUTY] = REG_FIELD(MT6370_REG_RGB3_DIM, 0, 4), > + [F_LED4_DUTY] = REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 0, 4), > + [F_LED1_FREQ] = REG_FIELD(MT6370_REG_RGB1_ISNK, 3, 5), > + [F_LED2_FREQ] = REG_FIELD(MT6370_REG_RGB2_ISNK, 3, 5), > + [F_LED3_FREQ] = REG_FIELD(MT6370_REG_RGB3_ISNK, 3, 5), > + [F_LED4_FREQ] = REG_FIELD(MT6370_REG_RGB_CHRIND_CTRL, 2, 4), > +}; > + > +static const struct reg_field mt6372_reg_fields[F_MAX_FIELDS] = { > + [F_RGB_EN] = REG_FIELD(MT6372_REG_RGB_EN, 4, 7), > + [F_CHGIND_EN] = REG_FIELD(MT6372_REG_RGB_EN, 3, 3), > + [F_LED1_CURR] = REG_FIELD(MT6372_REG_RGB1_ISNK, 0, 3), > + [F_LED2_CURR] = REG_FIELD(MT6372_REG_RGB2_ISNK, 0, 3), > + [F_LED3_CURR] = REG_FIELD(MT6372_REG_RGB3_ISNK, 0, 3), > + [F_LED4_CURR] = REG_FIELD(MT6372_REG_RGB4_ISNK, 0, 3), > + [F_LED1_MODE] = REG_FIELD(MT6372_REG_RGB1_ISNK, 6, 7), > + [F_LED2_MODE] = REG_FIELD(MT6372_REG_RGB2_ISNK, 6, 7), > + [F_LED3_MODE] = REG_FIELD(MT6372_REG_RGB3_ISNK, 6, 7), > + [F_LED4_MODE] = REG_FIELD(MT6372_REG_RGB4_ISNK, 6, 7), > + [F_LED1_DUTY] = REG_FIELD(MT6372_REG_RGB1_DIM, 0, 7), > + [F_LED2_DUTY] = REG_FIELD(MT6372_REG_RGB2_DIM, 0, 7), > + [F_LED3_DUTY] = REG_FIELD(MT6372_REG_RGB3_DIM, 0, 7), > + [F_LED4_DUTY] = REG_FIELD(MT6372_REG_RGB4_DIM, 0, 7), > + [F_LED1_FREQ] = REG_FIELD(MT6372_REG_RGB12_FREQ, 5, 7), > + [F_LED2_FREQ] = REG_FIELD(MT6372_REG_RGB12_FREQ, 2, 4), > + [F_LED3_FREQ] = REG_FIELD(MT6372_REG_RGB34_FREQ, 5, 7), > + [F_LED4_FREQ] = REG_FIELD(MT6372_REG_RGB34_FREQ, 2, 4), > +}; > + > +/* Current unit: microamp, time unit: millisecond */ > +static const struct linear_range common_led_ranges[R_MAX_RANGES] = { > + [R_LED123_CURR] = { 4000, 1, 6, 4000 }, > + [R_LED4_CURR] = { 2000, 1, 3, 2000 }, > + [R_LED_TRFON] = { 125, 0, 15, 200 }, > + [R_LED_TOFF] = { 250, 0, 15, 400 }, > +}; > + > +static const struct linear_range mt6372_led_ranges[R_MAX_RANGES] = { > + [R_LED123_CURR] = { 2000, 1, 14, 2000 }, > + [R_LED4_CURR] = { 2000, 1, 14, 2000 }, > + [R_LED_TRFON] = { 125, 0, 15, 250 }, > + [R_LED_TOFF] = { 250, 0, 15, 500 }, > +}; > + > +static const unsigned int common_tfreqs[] = { > + 10000, 5000, 2000, 1000, 500, 200, 5, 1, > +}; > + > +static const unsigned int mt6372_tfreqs[] = { > + 8000, 4000, 2000, 1000, 500, 250, 8, 4, > +}; > + > +static const struct mt6370_pdata common_pdata = { > + .tfreq = common_tfreqs, > + .tfreq_len = ARRAY_SIZE(common_tfreqs), > + .pwm_duty = MT6370_PWM_DUTY, > + .reg_rgb1_tr = MT6370_REG_RGB1_TR, > + .reg_rgb_chrind_tr = MT6370_REG_RGB_CHRIND_TR, > +}; > + > +static const struct mt6370_pdata mt6372_pdata = { > + .tfreq = mt6372_tfreqs, > + .tfreq_len = ARRAY_SIZE(mt6372_tfreqs), > + .pwm_duty = MT6372_PWM_DUTY, > + .reg_rgb1_tr = MT6372_REG_RGB1_TR, > + .reg_rgb_chrind_tr = -1, > +}; > + > +static enum mt6370_led_field mt6370_get_led_current_field(unsigned int led_no) > +{ > + switch (led_no) { > + case MT6370_LED_ISNK1: > + return F_LED1_CURR; > + case MT6370_LED_ISNK2: > + return F_LED2_CURR; > + case MT6370_LED_ISNK3: > + return F_LED3_CURR; > + default: > + return F_LED4_CURR; > + } > +} > + > +static int mt6370_set_led_brightness(struct mt6370_priv *priv, > + unsigned int led_no, unsigned int level) > +{ > + enum mt6370_led_field sel_field; > + > + sel_field = mt6370_get_led_current_field(led_no); > + > + return regmap_field_write(priv->fields[sel_field], level); > +} > + > +static int mt6370_get_led_brightness(struct mt6370_priv *priv, > + unsigned int led_no, unsigned int *level) > +{ > + enum mt6370_led_field sel_field; > + > + sel_field = mt6370_get_led_current_field(led_no); > + > + return regmap_field_read(priv->fields[sel_field], level); > +} > + > +static int mt6370_set_led_duty(struct mt6370_priv *priv, unsigned int led_no, > + unsigned int ton, unsigned int toff) > +{ > + const struct mt6370_pdata *pdata = priv->pdata; > + enum mt6370_led_field sel_field; > + unsigned int divisor, ratio; > + > + divisor = pdata->pwm_duty; > + ratio = ton * divisor / (ton + toff); > + > + switch (led_no) { > + case MT6370_LED_ISNK1: > + sel_field = F_LED1_DUTY; > + break; > + case MT6370_LED_ISNK2: > + sel_field = F_LED2_DUTY; > + break; > + case MT6370_LED_ISNK3: > + sel_field = F_LED3_DUTY; > + break; > + default: > + sel_field = F_LED4_DUTY; > + break; > + } > + > + return regmap_field_write(priv->fields[sel_field], ratio); > +} > + > +static int mt6370_set_led_freq(struct mt6370_priv *priv, unsigned int led_no, > + unsigned int ton, unsigned int toff) > +{ > + const struct mt6370_pdata *pdata = priv->pdata; > + enum mt6370_led_field sel_field; > + unsigned int tfreq_len = pdata->tfreq_len; > + unsigned int tsum, sel; > + > + tsum = ton + toff; > + > + if (tsum > pdata->tfreq[0] || tsum < pdata->tfreq[tfreq_len - 1]) > + return -EOPNOTSUPP; > + > + sel = find_closest_descending(tsum, pdata->tfreq, tfreq_len); > + > + switch (led_no) { > + case MT6370_LED_ISNK1: > + sel_field = F_LED1_FREQ; > + break; > + case MT6370_LED_ISNK2: > + sel_field = F_LED2_FREQ; > + break; > + case MT6370_LED_ISNK3: > + sel_field = F_LED3_FREQ; > + break; > + default: > + sel_field = F_LED4_FREQ; > + break; > + } > + > + return regmap_field_write(priv->fields[sel_field], sel); > +} > + > +static void mt6370_get_breath_reg_base(struct mt6370_priv *priv, > + unsigned int led_no, unsigned int *base) > +{ > + const struct mt6370_pdata *pdata = priv->pdata; > + > + if (pdata->reg_rgb_chrind_tr < 0) { > + *base = pdata->reg_rgb1_tr + led_no * 3; > + return; > + } > + > + switch (led_no) { > + case MT6370_LED_ISNK1: > + case MT6370_LED_ISNK2: > + case MT6370_LED_ISNK3: > + *base = pdata->reg_rgb1_tr + led_no * 3; > + break; > + default: > + *base = pdata->reg_rgb_chrind_tr; > + break; > + } > +} > + > +static int mt6370_gen_breath_pattern(struct mt6370_priv *priv, > + struct led_pattern *pattern, u32 len, > + u8 *pattern_val, u32 val_len) > +{ > + enum mt6370_led_ranges sel_range; > + struct led_pattern *curr; > + unsigned int sel; > + u32 val = 0; > + int i; > + > + if (len < P_MAX_PATTERNS && val_len < P_MAX_PATTERNS / 2) > + return -EINVAL; > + > + /* > + * Pattern list > + * tr1: byte 0, b'[7: 4] Perhaps this is standard formatting and I'm just not aware of it, but the space is throwing me and making me think twice. Does this mean bits 7 through 4, so b'11110000? > + * tr2: byte 0, b'[3: 0] > + * tf1: byte 1, b'[7: 4] > + * tf2: byte 1, b'[3: 0] > + * ton: byte 2, b'[7: 4] > + * toff: byte 2, b'[3: 0] > + */ > + for (i = 0; i < P_MAX_PATTERNS; i++) { > + curr = pattern + i; > + > + sel_range = i == P_LED_TOFF ? R_LED_TOFF : R_LED_TRFON; > + > + linear_range_get_selector_within(priv->ranges + sel_range, > + curr->delta_t, &sel); > + > + if (i % 2) { > + val |= sel; > + } else { > + val <<= 8; > + val |= sel << 4; > + } > + } > + > + put_unaligned_be24(val, pattern_val); > + > + return 0; > +} > + > +static int mt6370_set_led_mode(struct mt6370_priv *priv, unsigned int led_no, > + enum mt6370_led_mode mode) > +{ > + enum mt6370_led_field sel_field; > + > + switch (led_no) { > + case MT6370_LED_ISNK1: > + sel_field = F_LED1_MODE; > + break; > + case MT6370_LED_ISNK2: > + sel_field = F_LED2_MODE; > + break; > + case MT6370_LED_ISNK3: > + sel_field = F_LED3_MODE; > + break; > + default: > + sel_field = F_LED4_MODE; > + break; > + } > + > + return regmap_field_write(priv->fields[sel_field], mode); > +} > + > +static int mt6370_mc_brightness_set(struct led_classdev *lcdev, > + enum led_brightness level) > +{ > + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev); > + struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc); > + struct mt6370_priv *priv = led->priv; > + struct mc_subled *subled; > + unsigned int enable, disable; > + int i, ret; > + > + mutex_lock(&priv->lock); > + > + led_mc_calc_color_components(mccdev, level); > + > + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); > + if (ret) > + goto out_unlock; > + > + disable = enable; > + > + for (i = 0; i < mccdev->num_colors; i++) { > + u32 brightness; > + > + subled = mccdev->subled_info + i; > + brightness = min(subled->brightness, lcdev->max_brightness); > + disable &= ~MT6370_CHEN_BIT(subled->channel); > + > + if (level == 0) { > + enable &= ~MT6370_CHEN_BIT(subled->channel); > + > + ret = mt6370_set_led_mode(priv, subled->channel, > + MT6370_LED_REG_MODE); Please unify your line-wrap strategy. In some places you are using the full 100-chars allowable and in many others, you line-wrap early. Please go through the entire file and unwrap to 100-chars where appropriate. You'll see what I mean as you re-read the file with this in mind. > + if (ret) > + goto out_unlock; > + > + continue; > + } > + > + if (brightness == 0) { > + enable &= ~MT6370_CHEN_BIT(subled->channel); > + continue; > + } > + > + enable |= MT6370_CHEN_BIT(subled->channel); > + > + ret = mt6370_set_led_brightness(priv, subled->channel, > + brightness); > + if (ret) > + goto out_unlock; > + } > + > + ret = regmap_field_write(priv->fields[F_RGB_EN], disable); > + if (ret) > + goto out_unlock; > + > + ret = regmap_field_write(priv->fields[F_RGB_EN], enable); > + > +out_unlock: > + mutex_unlock(&priv->lock); > + > + return ret; > +} > + > +static int mt6370_mc_blink_set(struct led_classdev *lcdev, > + unsigned long *delay_on, > + unsigned long *delay_off) > +{ > + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev); > + struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc); > + struct mt6370_priv *priv = led->priv; > + struct mc_subled *subled; > + unsigned int enable, disable; > + int i, ret; > + > + mutex_lock(&priv->lock); > + > + if (!*delay_on && !*delay_off) > + *delay_on = *delay_off = 500; > + > + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); > + if (ret) > + goto out_unlock; > + > + disable = enable; > + > + for (i = 0; i < mccdev->num_colors; i++) { > + subled = mccdev->subled_info + i; > + > + disable &= ~MT6370_CHEN_BIT(subled->channel); > + > + ret = mt6370_set_led_duty(priv, subled->channel, *delay_on, > + *delay_off); > + if (ret) > + goto out_unlock; > + > + ret = mt6370_set_led_freq(priv, subled->channel, *delay_on, > + *delay_off); > + if (ret) > + goto out_unlock; > + > + ret = mt6370_set_led_mode(priv, subled->channel, > + MT6370_LED_PWM_MODE); > + if (ret) > + goto out_unlock; > + } > + > + /* Toggle to make pattern timing the same */ > + ret = regmap_field_write(priv->fields[F_RGB_EN], disable); > + if (ret) > + goto out_unlock; > + > + ret = regmap_field_write(priv->fields[F_RGB_EN], enable); > + > +out_unlock: > + mutex_unlock(&priv->lock); > + > + return ret; > +} > + > +static int mt6370_mc_pattern_set(struct led_classdev *lcdev, > + struct led_pattern *pattern, u32 len, int repeat) > +{ > + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev); > + struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc); > + struct mt6370_priv *priv = led->priv; > + struct mc_subled *subled; > + unsigned int reg_base, enable, disable; > + u8 params[P_MAX_PATTERNS / 2]; > + int i, ret; > + > + mutex_lock(&priv->lock); > + > + ret = mt6370_gen_breath_pattern(priv, pattern, len, params, > + sizeof(params)); > + if (ret) > + goto out_unlock; > + > + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); > + if (ret) > + goto out_unlock; > + > + disable = enable; > + > + for (i = 0; i < mccdev->num_colors; i++) { > + subled = mccdev->subled_info + i; > + > + mt6370_get_breath_reg_base(priv, subled->channel, ®_base); > + disable &= ~MT6370_CHEN_BIT(subled->channel); > + > + ret = regmap_raw_write(priv->regmap, reg_base, params, > + sizeof(params)); > + if (ret) > + goto out_unlock; > + > + ret = mt6370_set_led_mode(priv, subled->channel, > + MT6370_LED_BREATH_MODE); > + if (ret) > + goto out_unlock; > + } > + > + /* Toggle to make pattern timing be the same */ > + ret = regmap_field_write(priv->fields[F_RGB_EN], disable); > + if (ret) > + goto out_unlock; > + > + ret = regmap_field_write(priv->fields[F_RGB_EN], enable); > + > +out_unlock: > + mutex_unlock(&priv->lock); > + > + return ret; > +} > + > +static inline int mt6370_mc_pattern_clear(struct led_classdev *lcdev) > +{ > + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev); > + struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc); > + struct mt6370_priv *priv = led->priv; > + struct mc_subled *subled; > + int i, ret; > + > + mutex_lock(&led->priv->lock); > + > + for (i = 0; i < mccdev->num_colors; i++) { > + subled = mccdev->subled_info + i; > + > + ret = mt6370_set_led_mode(priv, subled->channel, > + MT6370_LED_REG_MODE); > + if (ret) > + break; > + } > + > + mutex_unlock(&led->priv->lock); > + > + return ret; > +} > + > +static int mt6370_isnk_brightness_set(struct led_classdev *lcdev, > + enum led_brightness level) > +{ > + struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink); > + struct mt6370_priv *priv = led->priv; > + unsigned int enable; > + int ret; > + > + mutex_lock(&priv->lock); > + > + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); > + if (ret) > + goto out_unlock; > + > + if (level == 0) { > + enable &= ~MT6370_CHEN_BIT(led->index); > + > + ret = mt6370_set_led_mode(priv, led->index, > + MT6370_LED_REG_MODE); > + if (ret) > + goto out_unlock; > + } else { > + enable |= MT6370_CHEN_BIT(led->index); > + > + ret = mt6370_set_led_brightness(priv, led->index, level); > + if (ret) > + goto out_unlock; > + } > + > + ret = regmap_field_write(priv->fields[F_RGB_EN], enable); > + > +out_unlock: > + mutex_unlock(&priv->lock); > + > + return ret; > +} > + > +static int mt6370_isnk_blink_set(struct led_classdev *lcdev, > + unsigned long *delay_on, > + unsigned long *delay_off) > +{ > + struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink); > + struct mt6370_priv *priv = led->priv; > + int ret; > + > + mutex_lock(&priv->lock); > + > + if (!*delay_on && !*delay_off) > + *delay_on = *delay_off = 500; > + > + ret = mt6370_set_led_duty(priv, led->index, *delay_on, *delay_off); > + if (ret) > + goto out_unlock; > + > + ret = mt6370_set_led_freq(priv, led->index, *delay_on, *delay_off); > + if (ret) > + goto out_unlock; > + > + ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_PWM_MODE); > + > +out_unlock: > + mutex_unlock(&priv->lock); > + > + return ret; > +} > + > +static int mt6370_isnk_pattern_set(struct led_classdev *lcdev, > + struct led_pattern *pattern, u32 len, > + int repeat) > +{ > + struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink); > + struct mt6370_priv *priv = led->priv; > + unsigned int reg_base; > + u8 params[P_MAX_PATTERNS / 2]; > + int ret; > + > + mutex_lock(&priv->lock); > + > + ret = mt6370_gen_breath_pattern(priv, pattern, len, params, > + sizeof(params)); > + if (ret) > + goto out_unlock; > + > + mt6370_get_breath_reg_base(priv, led->index, ®_base); > + > + ret = regmap_raw_write(priv->regmap, reg_base, params, sizeof(params)); > + if (ret) > + goto out_unlock; > + > + ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_BREATH_MODE); > + > +out_unlock: > + mutex_unlock(&priv->lock); > + > + return ret; > +} > + > +static inline int mt6370_isnk_pattern_clear(struct led_classdev *lcdev) > +{ > + struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink); > + struct mt6370_priv *priv = led->priv; > + int ret; > + > + mutex_lock(&led->priv->lock); > + ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_REG_MODE); > + mutex_unlock(&led->priv->lock); > + > + return ret; > +} > + > +static int mt6370_init_led_properties(struct device *dev, > + struct mt6370_led *led, > + struct led_init_data *init_data) > +{ > + struct mt6370_priv *priv = led->priv; > + struct led_classdev *lcdev; > + struct fwnode_handle *child; > + enum mt6370_led_ranges sel_range; > + u32 max_uA, max_level; > + int ret; > + > + if (led->index == MT6370_VIRTUAL_MULTICOLOR) { Rather than having these huge if-else statements, please consider using a sub-function. > + struct mc_subled *sub_led; > + u32 num_color = 0; > + > + sub_led = devm_kcalloc(dev, MC_CHANNEL_NUM, sizeof(*sub_led), > + GFP_KERNEL); > + if (!sub_led) > + return -ENOMEM; > + > + fwnode_for_each_child_node(init_data->fwnode, child) { > + u32 reg, color; > + > + ret = fwnode_property_read_u32(child, "reg", ®); > + if (ret || reg > MT6370_LED_ISNK3 || > + priv->leds_active & BIT(reg)) { > + fwnode_handle_put(child); > + return -EINVAL; > + } > + > + ret = fwnode_property_read_u32(child, "color", &color); > + if (ret) { > + fwnode_handle_put(child); > + return dev_err_probe(dev, ret, "LED %d, no color specified\n", > + led->index); > + } > + > + priv->leds_active |= BIT(reg); > + sub_led[num_color].color_index = color; > + sub_led[num_color].channel = reg; > + sub_led[num_color].intensity = 0; > + num_color++; > + } > + > + if (num_color < 2) > + return dev_err_probe(dev, -EINVAL, > + "Multicolor must include 2 or more LED channels\n"); > + > + led->mc.num_colors = num_color; > + led->mc.subled_info = sub_led; > + > + lcdev = &led->mc.led_cdev; > + lcdev->brightness_set_blocking = mt6370_mc_brightness_set; > + lcdev->blink_set = mt6370_mc_blink_set; > + lcdev->pattern_set = mt6370_mc_pattern_set; > + lcdev->pattern_clear = mt6370_mc_pattern_clear; > + } else { > + lcdev = &led->isink; > + lcdev->brightness_set_blocking = mt6370_isnk_brightness_set; > + lcdev->blink_set = mt6370_isnk_blink_set; > + lcdev->pattern_set = mt6370_isnk_pattern_set; > + lcdev->pattern_clear = mt6370_isnk_pattern_clear; > + } > + > + ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp", > + &max_uA); > + if (ret) { > + dev_warn(dev, "Not specified led-max-microamp, config to the minimum\n"); > + max_uA = 0; > + } > + > + if (led->index == MT6370_LED_ISNK4) > + sel_range = R_LED4_CURR; > + else > + sel_range = R_LED123_CURR; > + > + linear_range_get_selector_within(priv->ranges + sel_range, max_uA, > + &max_level); > + > + lcdev->max_brightness = max_level; > + > + led->default_state = led_init_default_state_get(init_data->fwnode); > + > + return 0; > +} > + > +static int mt6370_isnk_init_default_state(struct mt6370_led *led) > +{ > + struct mt6370_priv *priv = led->priv; > + unsigned int enable, level; > + int ret; > + > + ret = mt6370_get_led_brightness(priv, led->index, &level); > + if (ret) > + return ret; > + > + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); > + if (ret) > + return ret; > + > + if (!(enable & MT6370_CHEN_BIT(led->index))) > + level = 0; > + > + switch (led->default_state) { > + case LEDS_DEFSTATE_ON: > + led->isink.brightness = led->isink.max_brightness; > + break; > + case LEDS_DEFSTATE_KEEP: > + led->isink.brightness = min(level, led->isink.max_brightness); > + break; > + default: > + led->isink.brightness = 0; > + break; > + } > + > + return mt6370_isnk_brightness_set(&led->isink, led->isink.brightness); > +} > + > +static int mt6370_led_register(struct device *dev, struct mt6370_led *led, > + struct led_init_data *init_data) > +{ > + struct mt6370_priv *priv = led->priv; > + int ret; > + > + if (led->index == MT6370_VIRTUAL_MULTICOLOR) { This too could be split into separate functions to tidy things up a little. > + ret = mt6370_mc_brightness_set(&led->mc.led_cdev, 0); > + if (ret) > + return dev_err_probe(dev, ret, "Couldn't set multicolor brightness\n"); > + > + ret = devm_led_classdev_multicolor_register_ext(dev, &led->mc, > + init_data); > + if (ret) > + return dev_err_probe(dev, ret, "Couldn't register multicolor\n"); > + } else { > + if (led->index == MT6370_LED_ISNK4) { > + ret = regmap_field_write(priv->fields[F_CHGIND_EN], 1); > + if (ret) > + return dev_err_probe(dev, ret, "Failed to set CHRIND to SW\n"); > + } > + > + ret = mt6370_isnk_init_default_state(led); > + if (ret) > + return dev_err_probe(dev, ret, "Failed to init %d isnk state\n", > + led->index); > + > + ret = devm_led_classdev_register_ext(dev, &led->isink, > + init_data); > + if (ret) > + return dev_err_probe(dev, ret, "Couldn't register isink %d\n", led->index); > + } > + > + return 0; > +} > + > +static int mt6370_check_vendor_info(struct mt6370_priv *priv) > +{ > + unsigned int devinfo, vid; > + int ret; > + > + ret = regmap_read(priv->regmap, MT6370_REG_DEV_INFO, &devinfo); > + if (ret) > + return ret; > + > + vid = FIELD_GET(MT6370_VENID_MASK, devinfo); > + if (vid == 0x9 || vid == 0xb) { Are there nice human readable associates of these (vendor?) IDS? > + priv->reg_fields = mt6372_reg_fields; > + priv->ranges = mt6372_led_ranges; > + priv->pdata = &mt6372_pdata; > + } else { > + /* Common for MT6370/71 */ > + priv->reg_fields = common_reg_fields; > + priv->ranges = common_led_ranges; > + priv->pdata = &common_pdata; > + } > + > + return 0; > +} > + > +static int mt6370_leds_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct mt6370_priv *priv; > + struct fwnode_handle *child; > + size_t count; > + unsigned int i = 0; > + int ret; > + > + count = device_get_child_node_count(dev); > + if (!count || count > MT6370_MAX_LEDS) > + return dev_err_probe(dev, -EINVAL, > + "No child node or node count over max LED number %zu\n", > + count); > + > + priv = devm_kzalloc(dev, struct_size(priv, leds, count), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + priv->leds_count = count; > + mutex_init(&priv->lock); > + > + priv->regmap = dev_get_regmap(dev->parent, NULL); > + if (!priv->regmap) > + return dev_err_probe(dev, -ENODEV, "Failed to get parent regmap\n"); > + > + ret = mt6370_check_vendor_info(priv); > + if (ret) > + return dev_err_probe(dev, ret, "Failed to check vendor info\n"); > + > + ret = devm_regmap_field_bulk_alloc(dev, priv->regmap, priv->fields, > + priv->reg_fields, F_MAX_FIELDS); > + if (ret) > + return dev_err_probe(dev, ret, "Failed to allocate regmap field\n"); > + > + device_for_each_child_node(dev, child) { > + struct mt6370_led *led = priv->leds + i++; > + struct led_init_data init_data = { .fwnode = child }; > + u32 reg, color; > + > + ret = fwnode_property_read_u32(child, "reg", ®); > + if (ret) { > + fwnode_handle_put(child); > + return dev_err_probe(dev, ret, "Failed to parse reg property\n"); > + } > + > + if (reg >= MT6370_MAX_LEDS) { > + fwnode_handle_put(child); > + return dev_err_probe(dev, -EINVAL, "Error reg property number\n"); > + } > + > + ret = fwnode_property_read_u32(child, "color", &color); > + if (ret) { > + fwnode_handle_put(child); > + return dev_err_probe(dev, ret, "Failed to parse color property\n"); > + } > + > + if (color == LED_COLOR_ID_RGB || color == LED_COLOR_ID_MULTI) > + reg = MT6370_VIRTUAL_MULTICOLOR; > + > + if (priv->leds_active & BIT(reg)) { > + fwnode_handle_put(child); > + return dev_err_probe(dev, -EINVAL, "Duplicate reg property\n"); > + } > + > + priv->leds_active |= BIT(reg); > + > + led->index = reg; > + led->priv = priv; > + > + ret = mt6370_init_led_properties(dev, led, &init_data); > + if (ret) { > + fwnode_handle_put(child); I count 6 calls to fwnode_handle_put() here. Please use a goto to divert the error handling to the bottom of the function where you call fwnode_handle_put() just once. > + return ret; > + } > + > + ret = mt6370_led_register(dev, led, &init_data); > + if (ret) { > + fwnode_handle_put(child); > + return ret; > + } > + } > + > + return 0; > +} > + > +static const struct of_device_id mt6370_rgbled_device_table[] = { > + { .compatible = "mediatek,mt6370-indicator" }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, mt6370_rgbled_device_table); > + > +static struct platform_driver mt6370_rgbled_driver = { > + .driver = { > + .name = "mt6370-indicator", > + .of_match_table = mt6370_rgbled_device_table, > + }, > + .probe = mt6370_leds_probe, > +}; > +module_platform_driver(mt6370_rgbled_driver); > + > +MODULE_AUTHOR("Alice Chen <alice_chen@richtek.com>"); > +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); > +MODULE_DESCRIPTION("MediaTek MT6370 RGB LED Driver"); > +MODULE_LICENSE("GPL"); > -- > 2.7.4 >
Hi, Lee: Thanks's for the reviewing. To prevent the misunderstanding, reply as below. No reply means will do. On Sun, Mar 05, 2023 at 08:55:33AM +0000, Lee Jones wrote: > On Thu, 23 Feb 2023, ChiaEn Wu wrote: > > > From: ChiYuan Huang <cy_huang@richtek.com> > > > > The MediaTek MT6370 is a highly-integrated smart power management IC, > > which includes a single cell Li-Ion/Li-Polymer switching battery > > charger, a USB Type-C & Power Delivery (PD) controller, dual > > Flash LED current sources, a RGB LED driver, a backlight WLED driver, > > a display bias driver and a general LDO for portable devices. > > > > Add support for the MediaTek MT6370 Current Sink Type LED Indicator > > driver. It can control four channels current-sink RGB LEDs with 3 modes: > > constant current, PWM, and breath mode. > > > > Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> > > Co-developed-by: Alice Chen <alice_chen@richtek.com> > > Signed-off-by: Alice Chen <alice_chen@richtek.com> > > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> > > Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> > > --- > > v17 > > - Update the year of Copyright from 2022 to 2023 > > > > --- > > drivers/leds/rgb/Kconfig | 13 + > > drivers/leds/rgb/Makefile | 1 + > > drivers/leds/rgb/leds-mt6370-rgb.c | 1009 ++++++++++++++++++++++++++++++++++++ > > 3 files changed, 1023 insertions(+) > > create mode 100644 drivers/leds/rgb/leds-mt6370-rgb.c > > In generally, this is really nicely done. Great job. > > Just a few niggles, then you'll be good to go. > > > diff --git a/drivers/leds/rgb/Kconfig b/drivers/leds/rgb/Kconfig > > index 204cf47..7d86bb2 100644 > > --- a/drivers/leds/rgb/Kconfig > > +++ b/drivers/leds/rgb/Kconfig > > @@ -26,4 +26,17 @@ config LEDS_QCOM_LPG > > > > If compiled as a module, the module will be named leds-qcom-lpg. > > > > +config LEDS_MT6370_RGB > > + tristate "LED Support for MediaTek MT6370 PMIC" > > + depends on MFD_MT6370 > > + select LINEAR_RANGE > > + help > > + Say Y here to enable support for MT6370_RGB LED device. > > + In MT6370, there are four channel current-sink LED drivers that > > + support hardware pattern for constant current, PWM, and breath mode. > > + Isink4 channel can also be used as a CHG_VIN power good indicator. > > + > > + This driver can also be built as a module. If so, the module > > + will be called "leds-mt6370-rgb". > > + > > endif # LEDS_CLASS_MULTICOLOR > > diff --git a/drivers/leds/rgb/Makefile b/drivers/leds/rgb/Makefile > > index 0675bc0..8c01daf 100644 > > --- a/drivers/leds/rgb/Makefile > > +++ b/drivers/leds/rgb/Makefile > > @@ -2,3 +2,4 @@ > > > > obj-$(CONFIG_LEDS_PWM_MULTICOLOR) += leds-pwm-multicolor.o > > obj-$(CONFIG_LEDS_QCOM_LPG) += leds-qcom-lpg.o > > +obj-$(CONFIG_LEDS_MT6370_RGB) += leds-mt6370-rgb.o > > diff --git a/drivers/leds/rgb/leds-mt6370-rgb.c b/drivers/leds/rgb/leds-mt6370-rgb.c > > new file mode 100644 > > index 00000000..185d5d7 > > --- /dev/null > > +++ b/drivers/leds/rgb/leds-mt6370-rgb.c > > @@ -0,0 +1,1009 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright (C) 2023 Richtek Technology Corp. > > + * > > + * Authors: > > + * ChiYuan Huang <cy_huang@richtek.com> > > + * Alice Chen <alice_chen@richtek.com> > > + */ > > + > > +#include <linux/bitops.h> > > +#include <linux/kernel.h> > > +#include <linux/leds.h> > > +#include <linux/led-class-multicolor.h> > > +#include <linux/linear_range.h> > > +#include <linux/mod_devicetable.h> > > +#include <linux/module.h> > > +#include <linux/mutex.h> > > +#include <linux/platform_device.h> > > +#include <linux/property.h> > > +#include <linux/regmap.h> > > +#include <linux/util_macros.h> > > + > > +#include <asm/unaligned.h> > > + > > +enum { > > + MT6370_LED_ISNK1 = 0, > > + MT6370_LED_ISNK2, > > + MT6370_LED_ISNK3, > > + MT6370_LED_ISNK4, > > + MT6370_MAX_LEDS > > +}; > > + > > +enum mt6370_led_mode { > > + MT6370_LED_PWM_MODE = 0, > > + MT6370_LED_BREATH_MODE, > > + MT6370_LED_REG_MODE, > > + MT6370_LED_MAX_MODE > > +}; > > + > > +enum mt6370_led_field { > > + F_RGB_EN = 0, > > + F_CHGIND_EN, > > + F_LED1_CURR, > > + F_LED2_CURR, > > + F_LED3_CURR, > > + F_LED4_CURR, > > + F_LED1_MODE, > > + F_LED2_MODE, > > + F_LED3_MODE, > > + F_LED4_MODE, > > + F_LED1_DUTY, > > + F_LED2_DUTY, > > + F_LED3_DUTY, > > + F_LED4_DUTY, > > + F_LED1_FREQ, > > + F_LED2_FREQ, > > + F_LED3_FREQ, > > + F_LED4_FREQ, > > + F_MAX_FIELDS > > +}; > > + > > +enum mt6370_led_ranges { > > + R_LED123_CURR = 0, > > + R_LED4_CURR, > > + R_LED_TRFON, > > + R_LED_TOFF, > > + R_MAX_RANGES > > +}; > > + > > +enum mt6370_pattern { > > + P_LED_TR1 = 0, > > + P_LED_TR2, > > + P_LED_TF1, > > + P_LED_TF2, > > + P_LED_TON, > > + P_LED_TOFF, > > + P_MAX_PATTERNS > > +}; > > + > > +#define MT6370_REG_DEV_INFO 0x100 > > +#define MT6370_REG_RGB1_DIM 0x182 > > +#define MT6370_REG_RGB2_DIM 0x183 > > +#define MT6370_REG_RGB3_DIM 0x184 > > +#define MT6370_REG_RGB_EN 0x185 > > +#define MT6370_REG_RGB1_ISNK 0x186 > > +#define MT6370_REG_RGB2_ISNK 0x187 > > +#define MT6370_REG_RGB3_ISNK 0x188 > > +#define MT6370_REG_RGB1_TR 0x189 > > +#define MT6370_REG_RGB_CHRIND_DIM 0x192 > > +#define MT6370_REG_RGB_CHRIND_CTRL 0x193 > > +#define MT6370_REG_RGB_CHRIND_TR 0x194 > > + > > +#define MT6372_REG_RGB_EN 0x182 > > +#define MT6372_REG_RGB1_ISNK 0x183 > > +#define MT6372_REG_RGB2_ISNK 0x184 > > +#define MT6372_REG_RGB3_ISNK 0x185 > > +#define MT6372_REG_RGB4_ISNK 0x186 > > +#define MT6372_REG_RGB1_DIM 0x187 > > +#define MT6372_REG_RGB2_DIM 0x188 > > +#define MT6372_REG_RGB3_DIM 0x189 > > +#define MT6372_REG_RGB4_DIM 0x18A > > +#define MT6372_REG_RGB12_FREQ 0x18B > > +#define MT6372_REG_RGB34_FREQ 0x18C > > +#define MT6372_REG_RGB1_TR 0x18D > > + > > +#define MT6370_VENID_MASK GENMASK(7, 4) > > Vendor? Defines should be self documenting. > > What does this save over "VENDOR_ID"? > So 'MT6370_VENDOR_ID_MASK'? And will define all used VENDOR_ID. > > +#define MT6370_CHEN_BIT(id) BIT(MT6370_LED_ISNK4 - id) > > +#define MT6370_VIRTUAL_MULTICOLOR 5 > > +#define MC_CHANNEL_NUM 3 > > +#define MT6370_PWM_DUTY (BIT(5) - 1) > > +#define MT6372_PWM_DUTY (BIT(8) - 1) > > + > > +struct mt6370_led { > > + /* > > + * If the color of the LED in DT is set to > > + * - 'LED_COLOR_ID_RGB' > > + * - 'LED_COLOR_ID_MULTI' > > + * The member 'index' of this struct will be set to > > + * 'MT6370_VIRTUAL_MULTICOLOR'. > > + * If so, this LED will choose 'struct led_classdev_mc mc' to use. > > + * Instead, if the member 'index' of this struct is set to > > + * 'MT6370_LED_ISNK1' ~ 'MT6370_LED_ISNK4', then this LED will choose > > + * 'struct led_classdev isink' to use. > > + */ > > + union { > > + struct led_classdev isink; > > + struct led_classdev_mc mc; > > + }; > > + struct mt6370_priv *priv; > > + enum led_default_state default_state; > > + u32 index; > > +}; > > + > > +struct mt6370_pdata { > > + const unsigned int *tfreq; > > + unsigned int tfreq_len; > > + u16 reg_rgb1_tr; > > + s16 reg_rgb_chrind_tr; > > + u8 pwm_duty; > > +}; > > + > > +struct mt6370_priv { > > + /* Per LED access lock */ > > + struct mutex lock; > > + struct regmap *regmap; > > + struct regmap_field *fields[F_MAX_FIELDS]; > > + const struct reg_field *reg_fields; > > + const struct linear_range *ranges; > > + struct reg_cfg *reg_cfgs; > > + const struct mt6370_pdata *pdata; > > + unsigned int leds_count; > > + unsigned int leds_active; > > + struct mt6370_led leds[]; > > +}; > > + > > +static const struct reg_field common_reg_fields[F_MAX_FIELDS] = { > > + [F_RGB_EN] = REG_FIELD(MT6370_REG_RGB_EN, 4, 7), > > + [F_CHGIND_EN] = REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 7, 7), > > + [F_LED1_CURR] = REG_FIELD(MT6370_REG_RGB1_ISNK, 0, 2), > > + [F_LED2_CURR] = REG_FIELD(MT6370_REG_RGB2_ISNK, 0, 2), > > + [F_LED3_CURR] = REG_FIELD(MT6370_REG_RGB3_ISNK, 0, 2), > > + [F_LED4_CURR] = REG_FIELD(MT6370_REG_RGB_CHRIND_CTRL, 0, 1), > > + [F_LED1_MODE] = REG_FIELD(MT6370_REG_RGB1_DIM, 5, 6), > > + [F_LED2_MODE] = REG_FIELD(MT6370_REG_RGB2_DIM, 5, 6), > > + [F_LED3_MODE] = REG_FIELD(MT6370_REG_RGB3_DIM, 5, 6), > > + [F_LED4_MODE] = REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 5, 6), > > + [F_LED1_DUTY] = REG_FIELD(MT6370_REG_RGB1_DIM, 0, 4), > > + [F_LED2_DUTY] = REG_FIELD(MT6370_REG_RGB2_DIM, 0, 4), > > + [F_LED3_DUTY] = REG_FIELD(MT6370_REG_RGB3_DIM, 0, 4), > > + [F_LED4_DUTY] = REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 0, 4), > > + [F_LED1_FREQ] = REG_FIELD(MT6370_REG_RGB1_ISNK, 3, 5), > > + [F_LED2_FREQ] = REG_FIELD(MT6370_REG_RGB2_ISNK, 3, 5), > > + [F_LED3_FREQ] = REG_FIELD(MT6370_REG_RGB3_ISNK, 3, 5), > > + [F_LED4_FREQ] = REG_FIELD(MT6370_REG_RGB_CHRIND_CTRL, 2, 4), > > +}; > > + > > +static const struct reg_field mt6372_reg_fields[F_MAX_FIELDS] = { > > + [F_RGB_EN] = REG_FIELD(MT6372_REG_RGB_EN, 4, 7), > > + [F_CHGIND_EN] = REG_FIELD(MT6372_REG_RGB_EN, 3, 3), > > + [F_LED1_CURR] = REG_FIELD(MT6372_REG_RGB1_ISNK, 0, 3), > > + [F_LED2_CURR] = REG_FIELD(MT6372_REG_RGB2_ISNK, 0, 3), > > + [F_LED3_CURR] = REG_FIELD(MT6372_REG_RGB3_ISNK, 0, 3), > > + [F_LED4_CURR] = REG_FIELD(MT6372_REG_RGB4_ISNK, 0, 3), > > + [F_LED1_MODE] = REG_FIELD(MT6372_REG_RGB1_ISNK, 6, 7), > > + [F_LED2_MODE] = REG_FIELD(MT6372_REG_RGB2_ISNK, 6, 7), > > + [F_LED3_MODE] = REG_FIELD(MT6372_REG_RGB3_ISNK, 6, 7), > > + [F_LED4_MODE] = REG_FIELD(MT6372_REG_RGB4_ISNK, 6, 7), > > + [F_LED1_DUTY] = REG_FIELD(MT6372_REG_RGB1_DIM, 0, 7), > > + [F_LED2_DUTY] = REG_FIELD(MT6372_REG_RGB2_DIM, 0, 7), > > + [F_LED3_DUTY] = REG_FIELD(MT6372_REG_RGB3_DIM, 0, 7), > > + [F_LED4_DUTY] = REG_FIELD(MT6372_REG_RGB4_DIM, 0, 7), > > + [F_LED1_FREQ] = REG_FIELD(MT6372_REG_RGB12_FREQ, 5, 7), > > + [F_LED2_FREQ] = REG_FIELD(MT6372_REG_RGB12_FREQ, 2, 4), > > + [F_LED3_FREQ] = REG_FIELD(MT6372_REG_RGB34_FREQ, 5, 7), > > + [F_LED4_FREQ] = REG_FIELD(MT6372_REG_RGB34_FREQ, 2, 4), > > +}; > > + > > +/* Current unit: microamp, time unit: millisecond */ > > +static const struct linear_range common_led_ranges[R_MAX_RANGES] = { > > + [R_LED123_CURR] = { 4000, 1, 6, 4000 }, > > + [R_LED4_CURR] = { 2000, 1, 3, 2000 }, > > + [R_LED_TRFON] = { 125, 0, 15, 200 }, > > + [R_LED_TOFF] = { 250, 0, 15, 400 }, > > +}; > > + > > +static const struct linear_range mt6372_led_ranges[R_MAX_RANGES] = { > > + [R_LED123_CURR] = { 2000, 1, 14, 2000 }, > > + [R_LED4_CURR] = { 2000, 1, 14, 2000 }, > > + [R_LED_TRFON] = { 125, 0, 15, 250 }, > > + [R_LED_TOFF] = { 250, 0, 15, 500 }, > > +}; > > + > > +static const unsigned int common_tfreqs[] = { > > + 10000, 5000, 2000, 1000, 500, 200, 5, 1, > > +}; > > + > > +static const unsigned int mt6372_tfreqs[] = { > > + 8000, 4000, 2000, 1000, 500, 250, 8, 4, > > +}; > > + > > +static const struct mt6370_pdata common_pdata = { > > + .tfreq = common_tfreqs, > > + .tfreq_len = ARRAY_SIZE(common_tfreqs), > > + .pwm_duty = MT6370_PWM_DUTY, > > + .reg_rgb1_tr = MT6370_REG_RGB1_TR, > > + .reg_rgb_chrind_tr = MT6370_REG_RGB_CHRIND_TR, > > +}; > > + > > +static const struct mt6370_pdata mt6372_pdata = { > > + .tfreq = mt6372_tfreqs, > > + .tfreq_len = ARRAY_SIZE(mt6372_tfreqs), > > + .pwm_duty = MT6372_PWM_DUTY, > > + .reg_rgb1_tr = MT6372_REG_RGB1_TR, > > + .reg_rgb_chrind_tr = -1, > > +}; > > + > > +static enum mt6370_led_field mt6370_get_led_current_field(unsigned int led_no) > > +{ > > + switch (led_no) { > > + case MT6370_LED_ISNK1: > > + return F_LED1_CURR; > > + case MT6370_LED_ISNK2: > > + return F_LED2_CURR; > > + case MT6370_LED_ISNK3: > > + return F_LED3_CURR; > > + default: > > + return F_LED4_CURR; > > + } > > +} > > + > > +static int mt6370_set_led_brightness(struct mt6370_priv *priv, > > + unsigned int led_no, unsigned int level) > > +{ > > + enum mt6370_led_field sel_field; > > + > > + sel_field = mt6370_get_led_current_field(led_no); > > + > > + return regmap_field_write(priv->fields[sel_field], level); > > +} > > + > > +static int mt6370_get_led_brightness(struct mt6370_priv *priv, > > + unsigned int led_no, unsigned int *level) > > +{ > > + enum mt6370_led_field sel_field; > > + > > + sel_field = mt6370_get_led_current_field(led_no); > > + > > + return regmap_field_read(priv->fields[sel_field], level); > > +} > > + > > +static int mt6370_set_led_duty(struct mt6370_priv *priv, unsigned int led_no, > > + unsigned int ton, unsigned int toff) > > +{ > > + const struct mt6370_pdata *pdata = priv->pdata; > > + enum mt6370_led_field sel_field; > > + unsigned int divisor, ratio; > > + > > + divisor = pdata->pwm_duty; > > + ratio = ton * divisor / (ton + toff); > > + > > + switch (led_no) { > > + case MT6370_LED_ISNK1: > > + sel_field = F_LED1_DUTY; > > + break; > > + case MT6370_LED_ISNK2: > > + sel_field = F_LED2_DUTY; > > + break; > > + case MT6370_LED_ISNK3: > > + sel_field = F_LED3_DUTY; > > + break; > > + default: > > + sel_field = F_LED4_DUTY; > > + break; > > + } > > + > > + return regmap_field_write(priv->fields[sel_field], ratio); > > +} > > + > > +static int mt6370_set_led_freq(struct mt6370_priv *priv, unsigned int led_no, > > + unsigned int ton, unsigned int toff) > > +{ > > + const struct mt6370_pdata *pdata = priv->pdata; > > + enum mt6370_led_field sel_field; > > + unsigned int tfreq_len = pdata->tfreq_len; > > + unsigned int tsum, sel; > > + > > + tsum = ton + toff; > > + > > + if (tsum > pdata->tfreq[0] || tsum < pdata->tfreq[tfreq_len - 1]) > > + return -EOPNOTSUPP; > > + > > + sel = find_closest_descending(tsum, pdata->tfreq, tfreq_len); > > + > > + switch (led_no) { > > + case MT6370_LED_ISNK1: > > + sel_field = F_LED1_FREQ; > > + break; > > + case MT6370_LED_ISNK2: > > + sel_field = F_LED2_FREQ; > > + break; > > + case MT6370_LED_ISNK3: > > + sel_field = F_LED3_FREQ; > > + break; > > + default: > > + sel_field = F_LED4_FREQ; > > + break; > > + } > > + > > + return regmap_field_write(priv->fields[sel_field], sel); > > +} > > + > > +static void mt6370_get_breath_reg_base(struct mt6370_priv *priv, > > + unsigned int led_no, unsigned int *base) > > +{ > > + const struct mt6370_pdata *pdata = priv->pdata; > > + > > + if (pdata->reg_rgb_chrind_tr < 0) { > > + *base = pdata->reg_rgb1_tr + led_no * 3; > > + return; > > + } > > + > > + switch (led_no) { > > + case MT6370_LED_ISNK1: > > + case MT6370_LED_ISNK2: > > + case MT6370_LED_ISNK3: > > + *base = pdata->reg_rgb1_tr + led_no * 3; > > + break; > > + default: > > + *base = pdata->reg_rgb_chrind_tr; > > + break; > > + } > > +} > > + > > +static int mt6370_gen_breath_pattern(struct mt6370_priv *priv, > > + struct led_pattern *pattern, u32 len, > > + u8 *pattern_val, u32 val_len) > > +{ > > + enum mt6370_led_ranges sel_range; > > + struct led_pattern *curr; > > + unsigned int sel; > > + u32 val = 0; > > + int i; > > + > > + if (len < P_MAX_PATTERNS && val_len < P_MAX_PATTERNS / 2) > > + return -EINVAL; > > + > > + /* > > + * Pattern list > > + * tr1: byte 0, b'[7: 4] > > Perhaps this is standard formatting and I'm just not aware of it, but > the space is throwing me and making me think twice. Does this mean bits > 7 through 4, so b'11110000? > Yes. like as you said. Sorry for the redudant space make you confused. I'm not sure whether it's a standard formating or not. Sometimes, in datasheet, we'll use this format to represent the bitfield for functions. Your format is also good for it. And which one is preferable? > > + * tr2: byte 0, b'[3: 0] > > + * tf1: byte 1, b'[7: 4] > > + * tf2: byte 1, b'[3: 0] > > + * ton: byte 2, b'[7: 4] > > + * toff: byte 2, b'[3: 0] > > + */ > > + for (i = 0; i < P_MAX_PATTERNS; i++) { > > + curr = pattern + i; > > + > > + sel_range = i == P_LED_TOFF ? R_LED_TOFF : R_LED_TRFON; > > + > > + linear_range_get_selector_within(priv->ranges + sel_range, > > + curr->delta_t, &sel); > > + > > + if (i % 2) { > > + val |= sel; > > + } else { > > + val <<= 8; > > + val |= sel << 4; > > + } > > + } > > + > > + put_unaligned_be24(val, pattern_val); > > + > > + return 0; > > +} > > + > > +static int mt6370_set_led_mode(struct mt6370_priv *priv, unsigned int led_no, > > + enum mt6370_led_mode mode) > > +{ > > + enum mt6370_led_field sel_field; > > + > > + switch (led_no) { > > + case MT6370_LED_ISNK1: > > + sel_field = F_LED1_MODE; > > + break; > > + case MT6370_LED_ISNK2: > > + sel_field = F_LED2_MODE; > > + break; > > + case MT6370_LED_ISNK3: > > + sel_field = F_LED3_MODE; > > + break; > > + default: > > + sel_field = F_LED4_MODE; > > + break; > > + } > > + > > + return regmap_field_write(priv->fields[sel_field], mode); > > +} > > + > > +static int mt6370_mc_brightness_set(struct led_classdev *lcdev, > > + enum led_brightness level) > > +{ > > + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev); > > + struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc); > > + struct mt6370_priv *priv = led->priv; > > + struct mc_subled *subled; > > + unsigned int enable, disable; > > + int i, ret; > > + > > + mutex_lock(&priv->lock); > > + > > + led_mc_calc_color_components(mccdev, level); > > + > > + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); > > + if (ret) > > + goto out_unlock; > > + > > + disable = enable; > > + > > + for (i = 0; i < mccdev->num_colors; i++) { > > + u32 brightness; > > + > > + subled = mccdev->subled_info + i; > > + brightness = min(subled->brightness, lcdev->max_brightness); > > + disable &= ~MT6370_CHEN_BIT(subled->channel); > > + > > + if (level == 0) { > > + enable &= ~MT6370_CHEN_BIT(subled->channel); > > + > > + ret = mt6370_set_led_mode(priv, subled->channel, > > + MT6370_LED_REG_MODE); > > Please unify your line-wrap strategy. In some places you are using the > full 100-chars allowable and in many others, you line-wrap early. Please > go through the entire file and unwrap to 100-chars where appropriate. > > You'll see what I mean as you re-read the file with this in mind. > > > + if (ret) > > + goto out_unlock; > > + > > + continue; > > + } > > + > > + if (brightness == 0) { > > + enable &= ~MT6370_CHEN_BIT(subled->channel); > > + continue; > > + } > > + > > + enable |= MT6370_CHEN_BIT(subled->channel); > > + > > + ret = mt6370_set_led_brightness(priv, subled->channel, > > + brightness); > > + if (ret) > > + goto out_unlock; > > + } > > + > > + ret = regmap_field_write(priv->fields[F_RGB_EN], disable); > > + if (ret) > > + goto out_unlock; > > + > > + ret = regmap_field_write(priv->fields[F_RGB_EN], enable); > > + > > +out_unlock: > > + mutex_unlock(&priv->lock); > > + > > + return ret; > > +} > > + > > +static int mt6370_mc_blink_set(struct led_classdev *lcdev, > > + unsigned long *delay_on, > > + unsigned long *delay_off) > > +{ > > + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev); > > + struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc); > > + struct mt6370_priv *priv = led->priv; > > + struct mc_subled *subled; > > + unsigned int enable, disable; > > + int i, ret; > > + > > + mutex_lock(&priv->lock); > > + > > + if (!*delay_on && !*delay_off) > > + *delay_on = *delay_off = 500; > > + > > + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); > > + if (ret) > > + goto out_unlock; > > + > > + disable = enable; > > + > > + for (i = 0; i < mccdev->num_colors; i++) { > > + subled = mccdev->subled_info + i; > > + > > + disable &= ~MT6370_CHEN_BIT(subled->channel); > > + > > + ret = mt6370_set_led_duty(priv, subled->channel, *delay_on, > > + *delay_off); > > + if (ret) > > + goto out_unlock; > > + > > + ret = mt6370_set_led_freq(priv, subled->channel, *delay_on, > > + *delay_off); > > + if (ret) > > + goto out_unlock; > > + > > + ret = mt6370_set_led_mode(priv, subled->channel, > > + MT6370_LED_PWM_MODE); > > + if (ret) > > + goto out_unlock; > > + } > > + > > + /* Toggle to make pattern timing the same */ > > + ret = regmap_field_write(priv->fields[F_RGB_EN], disable); > > + if (ret) > > + goto out_unlock; > > + > > + ret = regmap_field_write(priv->fields[F_RGB_EN], enable); > > + > > +out_unlock: > > + mutex_unlock(&priv->lock); > > + > > + return ret; > > +} > > + > > +static int mt6370_mc_pattern_set(struct led_classdev *lcdev, > > + struct led_pattern *pattern, u32 len, int repeat) > > +{ > > + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev); > > + struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc); > > + struct mt6370_priv *priv = led->priv; > > + struct mc_subled *subled; > > + unsigned int reg_base, enable, disable; > > + u8 params[P_MAX_PATTERNS / 2]; > > + int i, ret; > > + > > + mutex_lock(&priv->lock); > > + > > + ret = mt6370_gen_breath_pattern(priv, pattern, len, params, > > + sizeof(params)); > > + if (ret) > > + goto out_unlock; > > + > > + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); > > + if (ret) > > + goto out_unlock; > > + > > + disable = enable; > > + > > + for (i = 0; i < mccdev->num_colors; i++) { > > + subled = mccdev->subled_info + i; > > + > > + mt6370_get_breath_reg_base(priv, subled->channel, ®_base); > > + disable &= ~MT6370_CHEN_BIT(subled->channel); > > + > > + ret = regmap_raw_write(priv->regmap, reg_base, params, > > + sizeof(params)); > > + if (ret) > > + goto out_unlock; > > + > > + ret = mt6370_set_led_mode(priv, subled->channel, > > + MT6370_LED_BREATH_MODE); > > + if (ret) > > + goto out_unlock; > > + } > > + > > + /* Toggle to make pattern timing be the same */ > > + ret = regmap_field_write(priv->fields[F_RGB_EN], disable); > > + if (ret) > > + goto out_unlock; > > + > > + ret = regmap_field_write(priv->fields[F_RGB_EN], enable); > > + > > +out_unlock: > > + mutex_unlock(&priv->lock); > > + > > + return ret; > > +} > > + > > +static inline int mt6370_mc_pattern_clear(struct led_classdev *lcdev) > > +{ > > + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev); > > + struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc); > > + struct mt6370_priv *priv = led->priv; > > + struct mc_subled *subled; > > + int i, ret; > > + > > + mutex_lock(&led->priv->lock); > > + > > + for (i = 0; i < mccdev->num_colors; i++) { > > + subled = mccdev->subled_info + i; > > + > > + ret = mt6370_set_led_mode(priv, subled->channel, > > + MT6370_LED_REG_MODE); > > + if (ret) > > + break; > > + } > > + > > + mutex_unlock(&led->priv->lock); > > + > > + return ret; > > +} > > + > > +static int mt6370_isnk_brightness_set(struct led_classdev *lcdev, > > + enum led_brightness level) > > +{ > > + struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink); > > + struct mt6370_priv *priv = led->priv; > > + unsigned int enable; > > + int ret; > > + > > + mutex_lock(&priv->lock); > > + > > + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); > > + if (ret) > > + goto out_unlock; > > + > > + if (level == 0) { > > + enable &= ~MT6370_CHEN_BIT(led->index); > > + > > + ret = mt6370_set_led_mode(priv, led->index, > > + MT6370_LED_REG_MODE); > > + if (ret) > > + goto out_unlock; > > + } else { > > + enable |= MT6370_CHEN_BIT(led->index); > > + > > + ret = mt6370_set_led_brightness(priv, led->index, level); > > + if (ret) > > + goto out_unlock; > > + } > > + > > + ret = regmap_field_write(priv->fields[F_RGB_EN], enable); > > + > > +out_unlock: > > + mutex_unlock(&priv->lock); > > + > > + return ret; > > +} > > + > > +static int mt6370_isnk_blink_set(struct led_classdev *lcdev, > > + unsigned long *delay_on, > > + unsigned long *delay_off) > > +{ > > + struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink); > > + struct mt6370_priv *priv = led->priv; > > + int ret; > > + > > + mutex_lock(&priv->lock); > > + > > + if (!*delay_on && !*delay_off) > > + *delay_on = *delay_off = 500; > > + > > + ret = mt6370_set_led_duty(priv, led->index, *delay_on, *delay_off); > > + if (ret) > > + goto out_unlock; > > + > > + ret = mt6370_set_led_freq(priv, led->index, *delay_on, *delay_off); > > + if (ret) > > + goto out_unlock; > > + > > + ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_PWM_MODE); > > + > > +out_unlock: > > + mutex_unlock(&priv->lock); > > + > > + return ret; > > +} > > + > > +static int mt6370_isnk_pattern_set(struct led_classdev *lcdev, > > + struct led_pattern *pattern, u32 len, > > + int repeat) > > +{ > > + struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink); > > + struct mt6370_priv *priv = led->priv; > > + unsigned int reg_base; > > + u8 params[P_MAX_PATTERNS / 2]; > > + int ret; > > + > > + mutex_lock(&priv->lock); > > + > > + ret = mt6370_gen_breath_pattern(priv, pattern, len, params, > > + sizeof(params)); > > + if (ret) > > + goto out_unlock; > > + > > + mt6370_get_breath_reg_base(priv, led->index, ®_base); > > + > > + ret = regmap_raw_write(priv->regmap, reg_base, params, sizeof(params)); > > + if (ret) > > + goto out_unlock; > > + > > + ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_BREATH_MODE); > > + > > +out_unlock: > > + mutex_unlock(&priv->lock); > > + > > + return ret; > > +} > > + > > +static inline int mt6370_isnk_pattern_clear(struct led_classdev *lcdev) > > +{ > > + struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink); > > + struct mt6370_priv *priv = led->priv; > > + int ret; > > + > > + mutex_lock(&led->priv->lock); > > + ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_REG_MODE); > > + mutex_unlock(&led->priv->lock); > > + > > + return ret; > > +} > > + > > +static int mt6370_init_led_properties(struct device *dev, > > + struct mt6370_led *led, > > + struct led_init_data *init_data) > > +{ > > + struct mt6370_priv *priv = led->priv; > > + struct led_classdev *lcdev; > > + struct fwnode_handle *child; > > + enum mt6370_led_ranges sel_range; > > + u32 max_uA, max_level; > > + int ret; > > + > > + if (led->index == MT6370_VIRTUAL_MULTICOLOR) { > > Rather than having these huge if-else statements, please consider using > a sub-function. > I'll rewrite this as a sub function 'mt6370_assign_multicolor_info'. start... > > + struct mc_subled *sub_led; > > + u32 num_color = 0; > > + > > + sub_led = devm_kcalloc(dev, MC_CHANNEL_NUM, sizeof(*sub_led), > > + GFP_KERNEL); > > + if (!sub_led) > > + return -ENOMEM; > > + > > + fwnode_for_each_child_node(init_data->fwnode, child) { > > + u32 reg, color; > > + > > + ret = fwnode_property_read_u32(child, "reg", ®); > > + if (ret || reg > MT6370_LED_ISNK3 || > > + priv->leds_active & BIT(reg)) { > > + fwnode_handle_put(child); > > + return -EINVAL; > > + } > > + > > + ret = fwnode_property_read_u32(child, "color", &color); > > + if (ret) { > > + fwnode_handle_put(child); > > + return dev_err_probe(dev, ret, "LED %d, no color specified\n", > > + led->index); > > + } > > + > > + priv->leds_active |= BIT(reg); > > + sub_led[num_color].color_index = color; > > + sub_led[num_color].channel = reg; > > + sub_led[num_color].intensity = 0; > > + num_color++; > > + } > > + > > + if (num_color < 2) > > + return dev_err_probe(dev, -EINVAL, > > + "Multicolor must include 2 or more LED channels\n"); > > + > > + led->mc.num_colors = num_color; > > + led->mc.subled_info = sub_led; > > + ...end > > + lcdev = &led->mc.led_cdev; > > + lcdev->brightness_set_blocking = mt6370_mc_brightness_set; > > + lcdev->blink_set = mt6370_mc_blink_set; > > + lcdev->pattern_set = mt6370_mc_pattern_set; > > + lcdev->pattern_clear = mt6370_mc_pattern_clear; > > + } else { > > + lcdev = &led->isink; > > + lcdev->brightness_set_blocking = mt6370_isnk_brightness_set; > > + lcdev->blink_set = mt6370_isnk_blink_set; > > + lcdev->pattern_set = mt6370_isnk_pattern_set; > > + lcdev->pattern_clear = mt6370_isnk_pattern_clear; > > + } > > + > > + ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp", > > + &max_uA); > > + if (ret) { > > + dev_warn(dev, "Not specified led-max-microamp, config to the minimum\n"); > > + max_uA = 0; > > + } > > + > > + if (led->index == MT6370_LED_ISNK4) > > + sel_range = R_LED4_CURR; > > + else > > + sel_range = R_LED123_CURR; > > + > > + linear_range_get_selector_within(priv->ranges + sel_range, max_uA, > > + &max_level); > > + > > + lcdev->max_brightness = max_level; > > + > > + led->default_state = led_init_default_state_get(init_data->fwnode); > > + > > + return 0; > > +} > > + > > +static int mt6370_isnk_init_default_state(struct mt6370_led *led) > > +{ > > + struct mt6370_priv *priv = led->priv; > > + unsigned int enable, level; > > + int ret; > > + > > + ret = mt6370_get_led_brightness(priv, led->index, &level); > > + if (ret) > > + return ret; > > + > > + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); > > + if (ret) > > + return ret; > > + > > + if (!(enable & MT6370_CHEN_BIT(led->index))) > > + level = 0; > > + > > + switch (led->default_state) { > > + case LEDS_DEFSTATE_ON: > > + led->isink.brightness = led->isink.max_brightness; > > + break; > > + case LEDS_DEFSTATE_KEEP: > > + led->isink.brightness = min(level, led->isink.max_brightness); > > + break; > > + default: > > + led->isink.brightness = 0; > > + break; > > + } > > + > > + return mt6370_isnk_brightness_set(&led->isink, led->isink.brightness); > > +} > > + > > +static int mt6370_led_register(struct device *dev, struct mt6370_led *led, > > + struct led_init_data *init_data) > > +{ > > + struct mt6370_priv *priv = led->priv; > > + int ret; > > + > > + if (led->index == MT6370_VIRTUAL_MULTICOLOR) { > > This too could be split into separate functions to tidy things up a > little. > Like as below? if (led->index == MT6370_VIRTUAL_MULTICOLOR) return mt6370_multicolor_led_register(....) if (led->index == MT6370_LED_ISNK4) { ..... } ret = mt6370_init_isnk_default_state(...) Since the multilor case directly return from the sub-function, else can be removed. > > + ret = mt6370_mc_brightness_set(&led->mc.led_cdev, 0); > > + if (ret) > > + return dev_err_probe(dev, ret, "Couldn't set multicolor brightness\n"); > > + > > + ret = devm_led_classdev_multicolor_register_ext(dev, &led->mc, > > + init_data); > > + if (ret) > > + return dev_err_probe(dev, ret, "Couldn't register multicolor\n"); > > + } else { > > + if (led->index == MT6370_LED_ISNK4) { > > + ret = regmap_field_write(priv->fields[F_CHGIND_EN], 1); > > + if (ret) > > + return dev_err_probe(dev, ret, "Failed to set CHRIND to SW\n"); > > + } > > + > > + ret = mt6370_isnk_init_default_state(led); > > + if (ret) > > + return dev_err_probe(dev, ret, "Failed to init %d isnk state\n", > > + led->index); > > + > > + ret = devm_led_classdev_register_ext(dev, &led->isink, > > + init_data); > > + if (ret) > > + return dev_err_probe(dev, ret, "Couldn't register isink %d\n", led->index); > > + } > > + > > + return 0; > > +} > > + > > +static int mt6370_check_vendor_info(struct mt6370_priv *priv) > > +{ > > + unsigned int devinfo, vid; > > + int ret; > > + > > + ret = regmap_read(priv->regmap, MT6370_REG_DEV_INFO, &devinfo); > > + if (ret) > > + return ret; > > + > > + vid = FIELD_GET(MT6370_VENID_MASK, devinfo); > > + if (vid == 0x9 || vid == 0xb) { > > Are there nice human readable associates of these (vendor?) IDS? > For clearly understanding, I'll define these two as 'MT6372_VENDOR_ID' and 'MT6372C_VENDOR_ID'. > > + priv->reg_fields = mt6372_reg_fields; > > + priv->ranges = mt6372_led_ranges; > > + priv->pdata = &mt6372_pdata; > > + } else { > > + /* Common for MT6370/71 */ > > + priv->reg_fields = common_reg_fields; > > + priv->ranges = common_led_ranges; > > + priv->pdata = &common_pdata; > > + } > > + > > + return 0; > > +} > > + > > +static int mt6370_leds_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct mt6370_priv *priv; > > + struct fwnode_handle *child; > > + size_t count; > > + unsigned int i = 0; > > + int ret; > > + > > + count = device_get_child_node_count(dev); > > + if (!count || count > MT6370_MAX_LEDS) > > + return dev_err_probe(dev, -EINVAL, > > + "No child node or node count over max LED number %zu\n", > > + count); > > + > > + priv = devm_kzalloc(dev, struct_size(priv, leds, count), GFP_KERNEL); > > + if (!priv) > > + return -ENOMEM; > > + > > + priv->leds_count = count; > > + mutex_init(&priv->lock); > > + > > + priv->regmap = dev_get_regmap(dev->parent, NULL); > > + if (!priv->regmap) > > + return dev_err_probe(dev, -ENODEV, "Failed to get parent regmap\n"); > > + > > + ret = mt6370_check_vendor_info(priv); > > + if (ret) > > + return dev_err_probe(dev, ret, "Failed to check vendor info\n"); > > + > > + ret = devm_regmap_field_bulk_alloc(dev, priv->regmap, priv->fields, > > + priv->reg_fields, F_MAX_FIELDS); > > + if (ret) > > + return dev_err_probe(dev, ret, "Failed to allocate regmap field\n"); > > + > > + device_for_each_child_node(dev, child) { > > + struct mt6370_led *led = priv->leds + i++; > > + struct led_init_data init_data = { .fwnode = child }; > > + u32 reg, color; > > + > > + ret = fwnode_property_read_u32(child, "reg", ®); > > + if (ret) { > > + fwnode_handle_put(child); > > + return dev_err_probe(dev, ret, "Failed to parse reg property\n"); > > + } > > + > > + if (reg >= MT6370_MAX_LEDS) { > > + fwnode_handle_put(child); > > + return dev_err_probe(dev, -EINVAL, "Error reg property number\n"); > > + } > > + > > + ret = fwnode_property_read_u32(child, "color", &color); > > + if (ret) { > > + fwnode_handle_put(child); > > + return dev_err_probe(dev, ret, "Failed to parse color property\n"); > > + } > > + > > + if (color == LED_COLOR_ID_RGB || color == LED_COLOR_ID_MULTI) > > + reg = MT6370_VIRTUAL_MULTICOLOR; > > + > > + if (priv->leds_active & BIT(reg)) { > > + fwnode_handle_put(child); > > + return dev_err_probe(dev, -EINVAL, "Duplicate reg property\n"); > > + } > > + > > + priv->leds_active |= BIT(reg); > > + > > + led->index = reg; > > + led->priv = priv; > > + > > + ret = mt6370_init_led_properties(dev, led, &init_data); > > + if (ret) { > > + fwnode_handle_put(child); > > I count 6 calls to fwnode_handle_put() here. > > Please use a goto to divert the error handling to the bottom of the > function where you call fwnode_handle_put() just once. > > > + return ret; > > + } > > + > > + ret = mt6370_led_register(dev, led, &init_data); > > + if (ret) { > > + fwnode_handle_put(child); > > + return ret; > > + } > > + } > > + > > + return 0; > > +} > > + > > +static const struct of_device_id mt6370_rgbled_device_table[] = { > > + { .compatible = "mediatek,mt6370-indicator" }, > > + {} > > +}; > > +MODULE_DEVICE_TABLE(of, mt6370_rgbled_device_table); > > + > > +static struct platform_driver mt6370_rgbled_driver = { > > + .driver = { > > + .name = "mt6370-indicator", > > + .of_match_table = mt6370_rgbled_device_table, > > + }, > > + .probe = mt6370_leds_probe, > > +}; > > +module_platform_driver(mt6370_rgbled_driver); > > + > > +MODULE_AUTHOR("Alice Chen <alice_chen@richtek.com>"); > > +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); > > +MODULE_DESCRIPTION("MediaTek MT6370 RGB LED Driver"); > > +MODULE_LICENSE("GPL"); > > -- > > 2.7.4 > > > > -- > Lee Jones [李琼斯]
On Tue, 07 Mar 2023, ChiYuan Huang wrote: > Hi, Lee: > > Thanks's for the reviewing. > To prevent the misunderstanding, reply as below. > No reply means will do. > > On Sun, Mar 05, 2023 at 08:55:33AM +0000, Lee Jones wrote: > > On Thu, 23 Feb 2023, ChiaEn Wu wrote: > > > > > From: ChiYuan Huang <cy_huang@richtek.com> > > > > > > The MediaTek MT6370 is a highly-integrated smart power management IC, > > > which includes a single cell Li-Ion/Li-Polymer switching battery > > > charger, a USB Type-C & Power Delivery (PD) controller, dual > > > Flash LED current sources, a RGB LED driver, a backlight WLED driver, > > > a display bias driver and a general LDO for portable devices. > > > > > > Add support for the MediaTek MT6370 Current Sink Type LED Indicator > > > driver. It can control four channels current-sink RGB LEDs with 3 modes: > > > constant current, PWM, and breath mode. > > > > > > Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> > > > Co-developed-by: Alice Chen <alice_chen@richtek.com> > > > Signed-off-by: Alice Chen <alice_chen@richtek.com> > > > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> > > > Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> > > > --- > > > v17 > > > - Update the year of Copyright from 2022 to 2023 > > > > > > --- > > > drivers/leds/rgb/Kconfig | 13 + > > > drivers/leds/rgb/Makefile | 1 + > > > drivers/leds/rgb/leds-mt6370-rgb.c | 1009 ++++++++++++++++++++++++++++++++++++ > > > 3 files changed, 1023 insertions(+) > > > create mode 100644 drivers/leds/rgb/leds-mt6370-rgb.c [...] > > > +static int mt6370_gen_breath_pattern(struct mt6370_priv *priv, > > > + struct led_pattern *pattern, u32 len, > > > + u8 *pattern_val, u32 val_len) > > > +{ > > > + enum mt6370_led_ranges sel_range; > > > + struct led_pattern *curr; > > > + unsigned int sel; > > > + u32 val = 0; > > > + int i; > > > + > > > + if (len < P_MAX_PATTERNS && val_len < P_MAX_PATTERNS / 2) > > > + return -EINVAL; > > > + > > > + /* > > > + * Pattern list > > > + * tr1: byte 0, b'[7: 4] > > > > Perhaps this is standard formatting and I'm just not aware of it, but > > the space is throwing me and making me think twice. Does this mean bits > > 7 through 4, so b'11110000? > > > Yes. like as you said. Sorry for the redudant space make you confused. > I'm not sure whether it's a standard formating or not. > Sometimes, in datasheet, we'll use this format to represent the bitfield for functions. > Your format is also good for it. > And which one is preferable? Since neither of us are sure, just take the space out for now please. > > > + * tr2: byte 0, b'[3: 0] > > > + * tf1: byte 1, b'[7: 4] > > > + * tf2: byte 1, b'[3: 0] > > > + * ton: byte 2, b'[7: 4] > > > + * toff: byte 2, b'[3: 0] > > > + */ > > > + for (i = 0; i < P_MAX_PATTERNS; i++) { > > > + curr = pattern + i; > > > + > > > + sel_range = i == P_LED_TOFF ? R_LED_TOFF : R_LED_TRFON; > > > + > > > + linear_range_get_selector_within(priv->ranges + sel_range, > > > + curr->delta_t, &sel); > > > + > > > + if (i % 2) { > > > + val |= sel; > > > + } else { > > > + val <<= 8; > > > + val |= sel << 4; > > > + } > > > + } [...] > > > +static int mt6370_led_register(struct device *dev, struct mt6370_led *led, > > > + struct led_init_data *init_data) > > > +{ > > > + struct mt6370_priv *priv = led->priv; > > > + int ret; > > > + > > > + if (led->index == MT6370_VIRTUAL_MULTICOLOR) { > > > > This too could be split into separate functions to tidy things up a > > little. > > > Like as below? > > if (led->index == MT6370_VIRTUAL_MULTICOLOR) > return mt6370_multicolor_led_register(....) > > if (led->index == MT6370_LED_ISNK4) { > ..... > } > > ret = mt6370_init_isnk_default_state(...) Yes, that kind of thing. > Since the multilor case directly return from the sub-function, else can be removed. > > > + ret = mt6370_mc_brightness_set(&led->mc.led_cdev, 0); > > > + if (ret) > > > + return dev_err_probe(dev, ret, "Couldn't set multicolor brightness\n"); > > > + > > > + ret = devm_led_classdev_multicolor_register_ext(dev, &led->mc, > > > + init_data); > > > + if (ret) > > > + return dev_err_probe(dev, ret, "Couldn't register multicolor\n"); > > > + } else { > > > + if (led->index == MT6370_LED_ISNK4) { > > > + ret = regmap_field_write(priv->fields[F_CHGIND_EN], 1); > > > + if (ret) > > > + return dev_err_probe(dev, ret, "Failed to set CHRIND to SW\n"); > > > + } > > > + > > > + ret = mt6370_isnk_init_default_state(led); > > > + if (ret) > > > + return dev_err_probe(dev, ret, "Failed to init %d isnk state\n", > > > + led->index); > > > + > > > + ret = devm_led_classdev_register_ext(dev, &led->isink, > > > + init_data); > > > + if (ret) > > > + return dev_err_probe(dev, ret, "Couldn't register isink %d\n", led->index); > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +static int mt6370_check_vendor_info(struct mt6370_priv *priv) > > > +{ > > > + unsigned int devinfo, vid; > > > + int ret; > > > + > > > + ret = regmap_read(priv->regmap, MT6370_REG_DEV_INFO, &devinfo); > > > + if (ret) > > > + return ret; > > > + > > > + vid = FIELD_GET(MT6370_VENID_MASK, devinfo); > > > + if (vid == 0x9 || vid == 0xb) { > > > > Are there nice human readable associates of these (vendor?) IDS? > > > For clearly understanding, I'll define these two as 'MT6372_VENDOR_ID' and 'MT6372C_VENDOR_ID'. Much better, thank you. -- Lee Jones [李琼斯]
diff --git a/drivers/leds/rgb/Kconfig b/drivers/leds/rgb/Kconfig index 204cf47..7d86bb2 100644 --- a/drivers/leds/rgb/Kconfig +++ b/drivers/leds/rgb/Kconfig @@ -26,4 +26,17 @@ config LEDS_QCOM_LPG If compiled as a module, the module will be named leds-qcom-lpg. +config LEDS_MT6370_RGB + tristate "LED Support for MediaTek MT6370 PMIC" + depends on MFD_MT6370 + select LINEAR_RANGE + help + Say Y here to enable support for MT6370_RGB LED device. + In MT6370, there are four channel current-sink LED drivers that + support hardware pattern for constant current, PWM, and breath mode. + Isink4 channel can also be used as a CHG_VIN power good indicator. + + This driver can also be built as a module. If so, the module + will be called "leds-mt6370-rgb". + endif # LEDS_CLASS_MULTICOLOR diff --git a/drivers/leds/rgb/Makefile b/drivers/leds/rgb/Makefile index 0675bc0..8c01daf 100644 --- a/drivers/leds/rgb/Makefile +++ b/drivers/leds/rgb/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_LEDS_PWM_MULTICOLOR) += leds-pwm-multicolor.o obj-$(CONFIG_LEDS_QCOM_LPG) += leds-qcom-lpg.o +obj-$(CONFIG_LEDS_MT6370_RGB) += leds-mt6370-rgb.o diff --git a/drivers/leds/rgb/leds-mt6370-rgb.c b/drivers/leds/rgb/leds-mt6370-rgb.c new file mode 100644 index 00000000..185d5d7 --- /dev/null +++ b/drivers/leds/rgb/leds-mt6370-rgb.c @@ -0,0 +1,1009 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2023 Richtek Technology Corp. + * + * Authors: + * ChiYuan Huang <cy_huang@richtek.com> + * Alice Chen <alice_chen@richtek.com> + */ + +#include <linux/bitops.h> +#include <linux/kernel.h> +#include <linux/leds.h> +#include <linux/led-class-multicolor.h> +#include <linux/linear_range.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/util_macros.h> + +#include <asm/unaligned.h> + +enum { + MT6370_LED_ISNK1 = 0, + MT6370_LED_ISNK2, + MT6370_LED_ISNK3, + MT6370_LED_ISNK4, + MT6370_MAX_LEDS +}; + +enum mt6370_led_mode { + MT6370_LED_PWM_MODE = 0, + MT6370_LED_BREATH_MODE, + MT6370_LED_REG_MODE, + MT6370_LED_MAX_MODE +}; + +enum mt6370_led_field { + F_RGB_EN = 0, + F_CHGIND_EN, + F_LED1_CURR, + F_LED2_CURR, + F_LED3_CURR, + F_LED4_CURR, + F_LED1_MODE, + F_LED2_MODE, + F_LED3_MODE, + F_LED4_MODE, + F_LED1_DUTY, + F_LED2_DUTY, + F_LED3_DUTY, + F_LED4_DUTY, + F_LED1_FREQ, + F_LED2_FREQ, + F_LED3_FREQ, + F_LED4_FREQ, + F_MAX_FIELDS +}; + +enum mt6370_led_ranges { + R_LED123_CURR = 0, + R_LED4_CURR, + R_LED_TRFON, + R_LED_TOFF, + R_MAX_RANGES +}; + +enum mt6370_pattern { + P_LED_TR1 = 0, + P_LED_TR2, + P_LED_TF1, + P_LED_TF2, + P_LED_TON, + P_LED_TOFF, + P_MAX_PATTERNS +}; + +#define MT6370_REG_DEV_INFO 0x100 +#define MT6370_REG_RGB1_DIM 0x182 +#define MT6370_REG_RGB2_DIM 0x183 +#define MT6370_REG_RGB3_DIM 0x184 +#define MT6370_REG_RGB_EN 0x185 +#define MT6370_REG_RGB1_ISNK 0x186 +#define MT6370_REG_RGB2_ISNK 0x187 +#define MT6370_REG_RGB3_ISNK 0x188 +#define MT6370_REG_RGB1_TR 0x189 +#define MT6370_REG_RGB_CHRIND_DIM 0x192 +#define MT6370_REG_RGB_CHRIND_CTRL 0x193 +#define MT6370_REG_RGB_CHRIND_TR 0x194 + +#define MT6372_REG_RGB_EN 0x182 +#define MT6372_REG_RGB1_ISNK 0x183 +#define MT6372_REG_RGB2_ISNK 0x184 +#define MT6372_REG_RGB3_ISNK 0x185 +#define MT6372_REG_RGB4_ISNK 0x186 +#define MT6372_REG_RGB1_DIM 0x187 +#define MT6372_REG_RGB2_DIM 0x188 +#define MT6372_REG_RGB3_DIM 0x189 +#define MT6372_REG_RGB4_DIM 0x18A +#define MT6372_REG_RGB12_FREQ 0x18B +#define MT6372_REG_RGB34_FREQ 0x18C +#define MT6372_REG_RGB1_TR 0x18D + +#define MT6370_VENID_MASK GENMASK(7, 4) +#define MT6370_CHEN_BIT(id) BIT(MT6370_LED_ISNK4 - id) +#define MT6370_VIRTUAL_MULTICOLOR 5 +#define MC_CHANNEL_NUM 3 +#define MT6370_PWM_DUTY (BIT(5) - 1) +#define MT6372_PWM_DUTY (BIT(8) - 1) + +struct mt6370_led { + /* + * If the color of the LED in DT is set to + * - 'LED_COLOR_ID_RGB' + * - 'LED_COLOR_ID_MULTI' + * The member 'index' of this struct will be set to + * 'MT6370_VIRTUAL_MULTICOLOR'. + * If so, this LED will choose 'struct led_classdev_mc mc' to use. + * Instead, if the member 'index' of this struct is set to + * 'MT6370_LED_ISNK1' ~ 'MT6370_LED_ISNK4', then this LED will choose + * 'struct led_classdev isink' to use. + */ + union { + struct led_classdev isink; + struct led_classdev_mc mc; + }; + struct mt6370_priv *priv; + enum led_default_state default_state; + u32 index; +}; + +struct mt6370_pdata { + const unsigned int *tfreq; + unsigned int tfreq_len; + u16 reg_rgb1_tr; + s16 reg_rgb_chrind_tr; + u8 pwm_duty; +}; + +struct mt6370_priv { + /* Per LED access lock */ + struct mutex lock; + struct regmap *regmap; + struct regmap_field *fields[F_MAX_FIELDS]; + const struct reg_field *reg_fields; + const struct linear_range *ranges; + struct reg_cfg *reg_cfgs; + const struct mt6370_pdata *pdata; + unsigned int leds_count; + unsigned int leds_active; + struct mt6370_led leds[]; +}; + +static const struct reg_field common_reg_fields[F_MAX_FIELDS] = { + [F_RGB_EN] = REG_FIELD(MT6370_REG_RGB_EN, 4, 7), + [F_CHGIND_EN] = REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 7, 7), + [F_LED1_CURR] = REG_FIELD(MT6370_REG_RGB1_ISNK, 0, 2), + [F_LED2_CURR] = REG_FIELD(MT6370_REG_RGB2_ISNK, 0, 2), + [F_LED3_CURR] = REG_FIELD(MT6370_REG_RGB3_ISNK, 0, 2), + [F_LED4_CURR] = REG_FIELD(MT6370_REG_RGB_CHRIND_CTRL, 0, 1), + [F_LED1_MODE] = REG_FIELD(MT6370_REG_RGB1_DIM, 5, 6), + [F_LED2_MODE] = REG_FIELD(MT6370_REG_RGB2_DIM, 5, 6), + [F_LED3_MODE] = REG_FIELD(MT6370_REG_RGB3_DIM, 5, 6), + [F_LED4_MODE] = REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 5, 6), + [F_LED1_DUTY] = REG_FIELD(MT6370_REG_RGB1_DIM, 0, 4), + [F_LED2_DUTY] = REG_FIELD(MT6370_REG_RGB2_DIM, 0, 4), + [F_LED3_DUTY] = REG_FIELD(MT6370_REG_RGB3_DIM, 0, 4), + [F_LED4_DUTY] = REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 0, 4), + [F_LED1_FREQ] = REG_FIELD(MT6370_REG_RGB1_ISNK, 3, 5), + [F_LED2_FREQ] = REG_FIELD(MT6370_REG_RGB2_ISNK, 3, 5), + [F_LED3_FREQ] = REG_FIELD(MT6370_REG_RGB3_ISNK, 3, 5), + [F_LED4_FREQ] = REG_FIELD(MT6370_REG_RGB_CHRIND_CTRL, 2, 4), +}; + +static const struct reg_field mt6372_reg_fields[F_MAX_FIELDS] = { + [F_RGB_EN] = REG_FIELD(MT6372_REG_RGB_EN, 4, 7), + [F_CHGIND_EN] = REG_FIELD(MT6372_REG_RGB_EN, 3, 3), + [F_LED1_CURR] = REG_FIELD(MT6372_REG_RGB1_ISNK, 0, 3), + [F_LED2_CURR] = REG_FIELD(MT6372_REG_RGB2_ISNK, 0, 3), + [F_LED3_CURR] = REG_FIELD(MT6372_REG_RGB3_ISNK, 0, 3), + [F_LED4_CURR] = REG_FIELD(MT6372_REG_RGB4_ISNK, 0, 3), + [F_LED1_MODE] = REG_FIELD(MT6372_REG_RGB1_ISNK, 6, 7), + [F_LED2_MODE] = REG_FIELD(MT6372_REG_RGB2_ISNK, 6, 7), + [F_LED3_MODE] = REG_FIELD(MT6372_REG_RGB3_ISNK, 6, 7), + [F_LED4_MODE] = REG_FIELD(MT6372_REG_RGB4_ISNK, 6, 7), + [F_LED1_DUTY] = REG_FIELD(MT6372_REG_RGB1_DIM, 0, 7), + [F_LED2_DUTY] = REG_FIELD(MT6372_REG_RGB2_DIM, 0, 7), + [F_LED3_DUTY] = REG_FIELD(MT6372_REG_RGB3_DIM, 0, 7), + [F_LED4_DUTY] = REG_FIELD(MT6372_REG_RGB4_DIM, 0, 7), + [F_LED1_FREQ] = REG_FIELD(MT6372_REG_RGB12_FREQ, 5, 7), + [F_LED2_FREQ] = REG_FIELD(MT6372_REG_RGB12_FREQ, 2, 4), + [F_LED3_FREQ] = REG_FIELD(MT6372_REG_RGB34_FREQ, 5, 7), + [F_LED4_FREQ] = REG_FIELD(MT6372_REG_RGB34_FREQ, 2, 4), +}; + +/* Current unit: microamp, time unit: millisecond */ +static const struct linear_range common_led_ranges[R_MAX_RANGES] = { + [R_LED123_CURR] = { 4000, 1, 6, 4000 }, + [R_LED4_CURR] = { 2000, 1, 3, 2000 }, + [R_LED_TRFON] = { 125, 0, 15, 200 }, + [R_LED_TOFF] = { 250, 0, 15, 400 }, +}; + +static const struct linear_range mt6372_led_ranges[R_MAX_RANGES] = { + [R_LED123_CURR] = { 2000, 1, 14, 2000 }, + [R_LED4_CURR] = { 2000, 1, 14, 2000 }, + [R_LED_TRFON] = { 125, 0, 15, 250 }, + [R_LED_TOFF] = { 250, 0, 15, 500 }, +}; + +static const unsigned int common_tfreqs[] = { + 10000, 5000, 2000, 1000, 500, 200, 5, 1, +}; + +static const unsigned int mt6372_tfreqs[] = { + 8000, 4000, 2000, 1000, 500, 250, 8, 4, +}; + +static const struct mt6370_pdata common_pdata = { + .tfreq = common_tfreqs, + .tfreq_len = ARRAY_SIZE(common_tfreqs), + .pwm_duty = MT6370_PWM_DUTY, + .reg_rgb1_tr = MT6370_REG_RGB1_TR, + .reg_rgb_chrind_tr = MT6370_REG_RGB_CHRIND_TR, +}; + +static const struct mt6370_pdata mt6372_pdata = { + .tfreq = mt6372_tfreqs, + .tfreq_len = ARRAY_SIZE(mt6372_tfreqs), + .pwm_duty = MT6372_PWM_DUTY, + .reg_rgb1_tr = MT6372_REG_RGB1_TR, + .reg_rgb_chrind_tr = -1, +}; + +static enum mt6370_led_field mt6370_get_led_current_field(unsigned int led_no) +{ + switch (led_no) { + case MT6370_LED_ISNK1: + return F_LED1_CURR; + case MT6370_LED_ISNK2: + return F_LED2_CURR; + case MT6370_LED_ISNK3: + return F_LED3_CURR; + default: + return F_LED4_CURR; + } +} + +static int mt6370_set_led_brightness(struct mt6370_priv *priv, + unsigned int led_no, unsigned int level) +{ + enum mt6370_led_field sel_field; + + sel_field = mt6370_get_led_current_field(led_no); + + return regmap_field_write(priv->fields[sel_field], level); +} + +static int mt6370_get_led_brightness(struct mt6370_priv *priv, + unsigned int led_no, unsigned int *level) +{ + enum mt6370_led_field sel_field; + + sel_field = mt6370_get_led_current_field(led_no); + + return regmap_field_read(priv->fields[sel_field], level); +} + +static int mt6370_set_led_duty(struct mt6370_priv *priv, unsigned int led_no, + unsigned int ton, unsigned int toff) +{ + const struct mt6370_pdata *pdata = priv->pdata; + enum mt6370_led_field sel_field; + unsigned int divisor, ratio; + + divisor = pdata->pwm_duty; + ratio = ton * divisor / (ton + toff); + + switch (led_no) { + case MT6370_LED_ISNK1: + sel_field = F_LED1_DUTY; + break; + case MT6370_LED_ISNK2: + sel_field = F_LED2_DUTY; + break; + case MT6370_LED_ISNK3: + sel_field = F_LED3_DUTY; + break; + default: + sel_field = F_LED4_DUTY; + break; + } + + return regmap_field_write(priv->fields[sel_field], ratio); +} + +static int mt6370_set_led_freq(struct mt6370_priv *priv, unsigned int led_no, + unsigned int ton, unsigned int toff) +{ + const struct mt6370_pdata *pdata = priv->pdata; + enum mt6370_led_field sel_field; + unsigned int tfreq_len = pdata->tfreq_len; + unsigned int tsum, sel; + + tsum = ton + toff; + + if (tsum > pdata->tfreq[0] || tsum < pdata->tfreq[tfreq_len - 1]) + return -EOPNOTSUPP; + + sel = find_closest_descending(tsum, pdata->tfreq, tfreq_len); + + switch (led_no) { + case MT6370_LED_ISNK1: + sel_field = F_LED1_FREQ; + break; + case MT6370_LED_ISNK2: + sel_field = F_LED2_FREQ; + break; + case MT6370_LED_ISNK3: + sel_field = F_LED3_FREQ; + break; + default: + sel_field = F_LED4_FREQ; + break; + } + + return regmap_field_write(priv->fields[sel_field], sel); +} + +static void mt6370_get_breath_reg_base(struct mt6370_priv *priv, + unsigned int led_no, unsigned int *base) +{ + const struct mt6370_pdata *pdata = priv->pdata; + + if (pdata->reg_rgb_chrind_tr < 0) { + *base = pdata->reg_rgb1_tr + led_no * 3; + return; + } + + switch (led_no) { + case MT6370_LED_ISNK1: + case MT6370_LED_ISNK2: + case MT6370_LED_ISNK3: + *base = pdata->reg_rgb1_tr + led_no * 3; + break; + default: + *base = pdata->reg_rgb_chrind_tr; + break; + } +} + +static int mt6370_gen_breath_pattern(struct mt6370_priv *priv, + struct led_pattern *pattern, u32 len, + u8 *pattern_val, u32 val_len) +{ + enum mt6370_led_ranges sel_range; + struct led_pattern *curr; + unsigned int sel; + u32 val = 0; + int i; + + if (len < P_MAX_PATTERNS && val_len < P_MAX_PATTERNS / 2) + return -EINVAL; + + /* + * Pattern list + * tr1: byte 0, b'[7: 4] + * tr2: byte 0, b'[3: 0] + * tf1: byte 1, b'[7: 4] + * tf2: byte 1, b'[3: 0] + * ton: byte 2, b'[7: 4] + * toff: byte 2, b'[3: 0] + */ + for (i = 0; i < P_MAX_PATTERNS; i++) { + curr = pattern + i; + + sel_range = i == P_LED_TOFF ? R_LED_TOFF : R_LED_TRFON; + + linear_range_get_selector_within(priv->ranges + sel_range, + curr->delta_t, &sel); + + if (i % 2) { + val |= sel; + } else { + val <<= 8; + val |= sel << 4; + } + } + + put_unaligned_be24(val, pattern_val); + + return 0; +} + +static int mt6370_set_led_mode(struct mt6370_priv *priv, unsigned int led_no, + enum mt6370_led_mode mode) +{ + enum mt6370_led_field sel_field; + + switch (led_no) { + case MT6370_LED_ISNK1: + sel_field = F_LED1_MODE; + break; + case MT6370_LED_ISNK2: + sel_field = F_LED2_MODE; + break; + case MT6370_LED_ISNK3: + sel_field = F_LED3_MODE; + break; + default: + sel_field = F_LED4_MODE; + break; + } + + return regmap_field_write(priv->fields[sel_field], mode); +} + +static int mt6370_mc_brightness_set(struct led_classdev *lcdev, + enum led_brightness level) +{ + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev); + struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc); + struct mt6370_priv *priv = led->priv; + struct mc_subled *subled; + unsigned int enable, disable; + int i, ret; + + mutex_lock(&priv->lock); + + led_mc_calc_color_components(mccdev, level); + + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); + if (ret) + goto out_unlock; + + disable = enable; + + for (i = 0; i < mccdev->num_colors; i++) { + u32 brightness; + + subled = mccdev->subled_info + i; + brightness = min(subled->brightness, lcdev->max_brightness); + disable &= ~MT6370_CHEN_BIT(subled->channel); + + if (level == 0) { + enable &= ~MT6370_CHEN_BIT(subled->channel); + + ret = mt6370_set_led_mode(priv, subled->channel, + MT6370_LED_REG_MODE); + if (ret) + goto out_unlock; + + continue; + } + + if (brightness == 0) { + enable &= ~MT6370_CHEN_BIT(subled->channel); + continue; + } + + enable |= MT6370_CHEN_BIT(subled->channel); + + ret = mt6370_set_led_brightness(priv, subled->channel, + brightness); + if (ret) + goto out_unlock; + } + + ret = regmap_field_write(priv->fields[F_RGB_EN], disable); + if (ret) + goto out_unlock; + + ret = regmap_field_write(priv->fields[F_RGB_EN], enable); + +out_unlock: + mutex_unlock(&priv->lock); + + return ret; +} + +static int mt6370_mc_blink_set(struct led_classdev *lcdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev); + struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc); + struct mt6370_priv *priv = led->priv; + struct mc_subled *subled; + unsigned int enable, disable; + int i, ret; + + mutex_lock(&priv->lock); + + if (!*delay_on && !*delay_off) + *delay_on = *delay_off = 500; + + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); + if (ret) + goto out_unlock; + + disable = enable; + + for (i = 0; i < mccdev->num_colors; i++) { + subled = mccdev->subled_info + i; + + disable &= ~MT6370_CHEN_BIT(subled->channel); + + ret = mt6370_set_led_duty(priv, subled->channel, *delay_on, + *delay_off); + if (ret) + goto out_unlock; + + ret = mt6370_set_led_freq(priv, subled->channel, *delay_on, + *delay_off); + if (ret) + goto out_unlock; + + ret = mt6370_set_led_mode(priv, subled->channel, + MT6370_LED_PWM_MODE); + if (ret) + goto out_unlock; + } + + /* Toggle to make pattern timing the same */ + ret = regmap_field_write(priv->fields[F_RGB_EN], disable); + if (ret) + goto out_unlock; + + ret = regmap_field_write(priv->fields[F_RGB_EN], enable); + +out_unlock: + mutex_unlock(&priv->lock); + + return ret; +} + +static int mt6370_mc_pattern_set(struct led_classdev *lcdev, + struct led_pattern *pattern, u32 len, int repeat) +{ + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev); + struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc); + struct mt6370_priv *priv = led->priv; + struct mc_subled *subled; + unsigned int reg_base, enable, disable; + u8 params[P_MAX_PATTERNS / 2]; + int i, ret; + + mutex_lock(&priv->lock); + + ret = mt6370_gen_breath_pattern(priv, pattern, len, params, + sizeof(params)); + if (ret) + goto out_unlock; + + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); + if (ret) + goto out_unlock; + + disable = enable; + + for (i = 0; i < mccdev->num_colors; i++) { + subled = mccdev->subled_info + i; + + mt6370_get_breath_reg_base(priv, subled->channel, ®_base); + disable &= ~MT6370_CHEN_BIT(subled->channel); + + ret = regmap_raw_write(priv->regmap, reg_base, params, + sizeof(params)); + if (ret) + goto out_unlock; + + ret = mt6370_set_led_mode(priv, subled->channel, + MT6370_LED_BREATH_MODE); + if (ret) + goto out_unlock; + } + + /* Toggle to make pattern timing be the same */ + ret = regmap_field_write(priv->fields[F_RGB_EN], disable); + if (ret) + goto out_unlock; + + ret = regmap_field_write(priv->fields[F_RGB_EN], enable); + +out_unlock: + mutex_unlock(&priv->lock); + + return ret; +} + +static inline int mt6370_mc_pattern_clear(struct led_classdev *lcdev) +{ + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev); + struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc); + struct mt6370_priv *priv = led->priv; + struct mc_subled *subled; + int i, ret; + + mutex_lock(&led->priv->lock); + + for (i = 0; i < mccdev->num_colors; i++) { + subled = mccdev->subled_info + i; + + ret = mt6370_set_led_mode(priv, subled->channel, + MT6370_LED_REG_MODE); + if (ret) + break; + } + + mutex_unlock(&led->priv->lock); + + return ret; +} + +static int mt6370_isnk_brightness_set(struct led_classdev *lcdev, + enum led_brightness level) +{ + struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink); + struct mt6370_priv *priv = led->priv; + unsigned int enable; + int ret; + + mutex_lock(&priv->lock); + + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); + if (ret) + goto out_unlock; + + if (level == 0) { + enable &= ~MT6370_CHEN_BIT(led->index); + + ret = mt6370_set_led_mode(priv, led->index, + MT6370_LED_REG_MODE); + if (ret) + goto out_unlock; + } else { + enable |= MT6370_CHEN_BIT(led->index); + + ret = mt6370_set_led_brightness(priv, led->index, level); + if (ret) + goto out_unlock; + } + + ret = regmap_field_write(priv->fields[F_RGB_EN], enable); + +out_unlock: + mutex_unlock(&priv->lock); + + return ret; +} + +static int mt6370_isnk_blink_set(struct led_classdev *lcdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink); + struct mt6370_priv *priv = led->priv; + int ret; + + mutex_lock(&priv->lock); + + if (!*delay_on && !*delay_off) + *delay_on = *delay_off = 500; + + ret = mt6370_set_led_duty(priv, led->index, *delay_on, *delay_off); + if (ret) + goto out_unlock; + + ret = mt6370_set_led_freq(priv, led->index, *delay_on, *delay_off); + if (ret) + goto out_unlock; + + ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_PWM_MODE); + +out_unlock: + mutex_unlock(&priv->lock); + + return ret; +} + +static int mt6370_isnk_pattern_set(struct led_classdev *lcdev, + struct led_pattern *pattern, u32 len, + int repeat) +{ + struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink); + struct mt6370_priv *priv = led->priv; + unsigned int reg_base; + u8 params[P_MAX_PATTERNS / 2]; + int ret; + + mutex_lock(&priv->lock); + + ret = mt6370_gen_breath_pattern(priv, pattern, len, params, + sizeof(params)); + if (ret) + goto out_unlock; + + mt6370_get_breath_reg_base(priv, led->index, ®_base); + + ret = regmap_raw_write(priv->regmap, reg_base, params, sizeof(params)); + if (ret) + goto out_unlock; + + ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_BREATH_MODE); + +out_unlock: + mutex_unlock(&priv->lock); + + return ret; +} + +static inline int mt6370_isnk_pattern_clear(struct led_classdev *lcdev) +{ + struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink); + struct mt6370_priv *priv = led->priv; + int ret; + + mutex_lock(&led->priv->lock); + ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_REG_MODE); + mutex_unlock(&led->priv->lock); + + return ret; +} + +static int mt6370_init_led_properties(struct device *dev, + struct mt6370_led *led, + struct led_init_data *init_data) +{ + struct mt6370_priv *priv = led->priv; + struct led_classdev *lcdev; + struct fwnode_handle *child; + enum mt6370_led_ranges sel_range; + u32 max_uA, max_level; + int ret; + + if (led->index == MT6370_VIRTUAL_MULTICOLOR) { + struct mc_subled *sub_led; + u32 num_color = 0; + + sub_led = devm_kcalloc(dev, MC_CHANNEL_NUM, sizeof(*sub_led), + GFP_KERNEL); + if (!sub_led) + return -ENOMEM; + + fwnode_for_each_child_node(init_data->fwnode, child) { + u32 reg, color; + + ret = fwnode_property_read_u32(child, "reg", ®); + if (ret || reg > MT6370_LED_ISNK3 || + priv->leds_active & BIT(reg)) { + fwnode_handle_put(child); + return -EINVAL; + } + + ret = fwnode_property_read_u32(child, "color", &color); + if (ret) { + fwnode_handle_put(child); + return dev_err_probe(dev, ret, "LED %d, no color specified\n", + led->index); + } + + priv->leds_active |= BIT(reg); + sub_led[num_color].color_index = color; + sub_led[num_color].channel = reg; + sub_led[num_color].intensity = 0; + num_color++; + } + + if (num_color < 2) + return dev_err_probe(dev, -EINVAL, + "Multicolor must include 2 or more LED channels\n"); + + led->mc.num_colors = num_color; + led->mc.subled_info = sub_led; + + lcdev = &led->mc.led_cdev; + lcdev->brightness_set_blocking = mt6370_mc_brightness_set; + lcdev->blink_set = mt6370_mc_blink_set; + lcdev->pattern_set = mt6370_mc_pattern_set; + lcdev->pattern_clear = mt6370_mc_pattern_clear; + } else { + lcdev = &led->isink; + lcdev->brightness_set_blocking = mt6370_isnk_brightness_set; + lcdev->blink_set = mt6370_isnk_blink_set; + lcdev->pattern_set = mt6370_isnk_pattern_set; + lcdev->pattern_clear = mt6370_isnk_pattern_clear; + } + + ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp", + &max_uA); + if (ret) { + dev_warn(dev, "Not specified led-max-microamp, config to the minimum\n"); + max_uA = 0; + } + + if (led->index == MT6370_LED_ISNK4) + sel_range = R_LED4_CURR; + else + sel_range = R_LED123_CURR; + + linear_range_get_selector_within(priv->ranges + sel_range, max_uA, + &max_level); + + lcdev->max_brightness = max_level; + + led->default_state = led_init_default_state_get(init_data->fwnode); + + return 0; +} + +static int mt6370_isnk_init_default_state(struct mt6370_led *led) +{ + struct mt6370_priv *priv = led->priv; + unsigned int enable, level; + int ret; + + ret = mt6370_get_led_brightness(priv, led->index, &level); + if (ret) + return ret; + + ret = regmap_field_read(priv->fields[F_RGB_EN], &enable); + if (ret) + return ret; + + if (!(enable & MT6370_CHEN_BIT(led->index))) + level = 0; + + switch (led->default_state) { + case LEDS_DEFSTATE_ON: + led->isink.brightness = led->isink.max_brightness; + break; + case LEDS_DEFSTATE_KEEP: + led->isink.brightness = min(level, led->isink.max_brightness); + break; + default: + led->isink.brightness = 0; + break; + } + + return mt6370_isnk_brightness_set(&led->isink, led->isink.brightness); +} + +static int mt6370_led_register(struct device *dev, struct mt6370_led *led, + struct led_init_data *init_data) +{ + struct mt6370_priv *priv = led->priv; + int ret; + + if (led->index == MT6370_VIRTUAL_MULTICOLOR) { + ret = mt6370_mc_brightness_set(&led->mc.led_cdev, 0); + if (ret) + return dev_err_probe(dev, ret, "Couldn't set multicolor brightness\n"); + + ret = devm_led_classdev_multicolor_register_ext(dev, &led->mc, + init_data); + if (ret) + return dev_err_probe(dev, ret, "Couldn't register multicolor\n"); + } else { + if (led->index == MT6370_LED_ISNK4) { + ret = regmap_field_write(priv->fields[F_CHGIND_EN], 1); + if (ret) + return dev_err_probe(dev, ret, "Failed to set CHRIND to SW\n"); + } + + ret = mt6370_isnk_init_default_state(led); + if (ret) + return dev_err_probe(dev, ret, "Failed to init %d isnk state\n", + led->index); + + ret = devm_led_classdev_register_ext(dev, &led->isink, + init_data); + if (ret) + return dev_err_probe(dev, ret, "Couldn't register isink %d\n", led->index); + } + + return 0; +} + +static int mt6370_check_vendor_info(struct mt6370_priv *priv) +{ + unsigned int devinfo, vid; + int ret; + + ret = regmap_read(priv->regmap, MT6370_REG_DEV_INFO, &devinfo); + if (ret) + return ret; + + vid = FIELD_GET(MT6370_VENID_MASK, devinfo); + if (vid == 0x9 || vid == 0xb) { + priv->reg_fields = mt6372_reg_fields; + priv->ranges = mt6372_led_ranges; + priv->pdata = &mt6372_pdata; + } else { + /* Common for MT6370/71 */ + priv->reg_fields = common_reg_fields; + priv->ranges = common_led_ranges; + priv->pdata = &common_pdata; + } + + return 0; +} + +static int mt6370_leds_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mt6370_priv *priv; + struct fwnode_handle *child; + size_t count; + unsigned int i = 0; + int ret; + + count = device_get_child_node_count(dev); + if (!count || count > MT6370_MAX_LEDS) + return dev_err_probe(dev, -EINVAL, + "No child node or node count over max LED number %zu\n", + count); + + priv = devm_kzalloc(dev, struct_size(priv, leds, count), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->leds_count = count; + mutex_init(&priv->lock); + + priv->regmap = dev_get_regmap(dev->parent, NULL); + if (!priv->regmap) + return dev_err_probe(dev, -ENODEV, "Failed to get parent regmap\n"); + + ret = mt6370_check_vendor_info(priv); + if (ret) + return dev_err_probe(dev, ret, "Failed to check vendor info\n"); + + ret = devm_regmap_field_bulk_alloc(dev, priv->regmap, priv->fields, + priv->reg_fields, F_MAX_FIELDS); + if (ret) + return dev_err_probe(dev, ret, "Failed to allocate regmap field\n"); + + device_for_each_child_node(dev, child) { + struct mt6370_led *led = priv->leds + i++; + struct led_init_data init_data = { .fwnode = child }; + u32 reg, color; + + ret = fwnode_property_read_u32(child, "reg", ®); + if (ret) { + fwnode_handle_put(child); + return dev_err_probe(dev, ret, "Failed to parse reg property\n"); + } + + if (reg >= MT6370_MAX_LEDS) { + fwnode_handle_put(child); + return dev_err_probe(dev, -EINVAL, "Error reg property number\n"); + } + + ret = fwnode_property_read_u32(child, "color", &color); + if (ret) { + fwnode_handle_put(child); + return dev_err_probe(dev, ret, "Failed to parse color property\n"); + } + + if (color == LED_COLOR_ID_RGB || color == LED_COLOR_ID_MULTI) + reg = MT6370_VIRTUAL_MULTICOLOR; + + if (priv->leds_active & BIT(reg)) { + fwnode_handle_put(child); + return dev_err_probe(dev, -EINVAL, "Duplicate reg property\n"); + } + + priv->leds_active |= BIT(reg); + + led->index = reg; + led->priv = priv; + + ret = mt6370_init_led_properties(dev, led, &init_data); + if (ret) { + fwnode_handle_put(child); + return ret; + } + + ret = mt6370_led_register(dev, led, &init_data); + if (ret) { + fwnode_handle_put(child); + return ret; + } + } + + return 0; +} + +static const struct of_device_id mt6370_rgbled_device_table[] = { + { .compatible = "mediatek,mt6370-indicator" }, + {} +}; +MODULE_DEVICE_TABLE(of, mt6370_rgbled_device_table); + +static struct platform_driver mt6370_rgbled_driver = { + .driver = { + .name = "mt6370-indicator", + .of_match_table = mt6370_rgbled_device_table, + }, + .probe = mt6370_leds_probe, +}; +module_platform_driver(mt6370_rgbled_driver); + +MODULE_AUTHOR("Alice Chen <alice_chen@richtek.com>"); +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); +MODULE_DESCRIPTION("MediaTek MT6370 RGB LED Driver"); +MODULE_LICENSE("GPL");