| Message ID | 20230308082800.3008-2-minda.chen@starfivetech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add JH7110 USB driver support | expand |
On Wed, 08 Mar 2023 16:27:58 +0800, Minda Chen wrote: > Add StarFive JH7110 SoC USB 3.0 phy dt-binding. > USB controller is cadence USB 3.0 IP. > > Signed-off-by: Minda Chen <minda.chen@starfivetech.com> > --- > .../bindings/phy/starfive,jh7110-usb-phy.yaml | 158 ++++++++++++++++++ > 1 file changed, 158 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dtb: usb@10100000: phy-names:1: 'anyOf' conditional failed, one must be fixed: 'cdns3,usb2-phy' was expected 'cdns3,usb3-phy' was expected From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/cdns,usb3.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dtb: usb@10100000: 'phys' is a dependency of 'phy-names' From schema: /usr/local/lib/python3.10/dist-packages/dtschema/schemas/phy/phy-consumer.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230308082800.3008-2-minda.chen@starfivetech.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Wed, Mar 08, 2023 at 04:27:58PM +0800, Minda Chen wrote: > Add StarFive JH7110 SoC USB 3.0 phy dt-binding. > USB controller is cadence USB 3.0 IP. > > Signed-off-by: Minda Chen <minda.chen@starfivetech.com> > --- > .../bindings/phy/starfive,jh7110-usb-phy.yaml | 158 ++++++++++++++++++ > 1 file changed, 158 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml > > diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml > new file mode 100644 > index 000000000000..daa88d065deb > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml Filename should match the compatible. The filename seems more correct than the compatible... > @@ -0,0 +1,158 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: StarFive USB 2.0 and 3.0 PHY > + > +maintainers: > + - Minda Chen<minda.chen@starfivetech.com> > + > +properties: > + compatible: > + items: > + - const: starfive,jh7110-usb What's the USB controller called? > + > + reg: > + maxItems: 2 > + > + reg-names: > + items: > + - const: usb3 > + - const: usb2 > + > + clocks: > + items: > + - description: usb 125m clock > + - description: app 125m clock > + - description: lpm clock > + - description: stb clock > + - description: apb clock > + - description: axi clock > + - description: utmi apb clock > + > + clock-names: > + items: > + - const: usb_125m > + - const: usb0_app_125 > + - const: usb0_lpm > + - const: usb0_stb > + - const: usb0_apb > + - const: usb0_axi > + - const: usb0_utmi_apb usb_ and usb0_ is redundant, drop. > + > + resets: > + items: > + - description: USB0_PWRUP reset > + - description: USB0_APB reset > + - description: USB0_AXI reset > + - description: USB0_UTMI_APB reset > + > + starfive,sys-syscon: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + items: > + items: Are there multiple entries of phandle+offset because this says there are. You want '- items:' here to limit it to 1 phandle+offset. > + - description: phandle to System Register Controller sys_syscon node. > + - description: offset of SYS_SYSCONSAIF__SYSCFG register for USB. > + description: > + The phandle to System Register Controller syscon node and the offset > + of SYS_SYSCONSAIF__SYSCFG register for USB. > + > + starfive,stg-syscon: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + items: > + items: Same here. > + - description: phandle to System Register Controller stg_syscon node. > + - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for USB. > + - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for USB. > + - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for USB. > + - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for USB. > + description: > + The phandle to System Register Controller syscon node and the offset > + of STG_SYSCONSAIF__SYSCFG register for USB. Total 4 regsisters offset > + for USB. > + > + dr_mode: Usually this belongs in the controller node. > + description: PHY mode. > + enum: > + - host > + - peripheral > + - otg > + > + "#address-cells": > + maximum: 2 > + > + "#size-cells": > + maximum: 2 > + > + ranges: true > + > + starfive,usb2-only: > + type: boolean > + description: Set USB using usb 2.0 phy. Supprt USB 2.0 only The 'maximum-speed' property in the controller should be enough. Why is this needed. Being a PHY, you are missing #phy-cells. > + > +required: > + - compatible > + - reg > + - reg-names > + - clocks > + - clock-names > + - resets > + - starfive,sys-syscon > + - starfive,stg-syscon > + - dr_mode > + - "#address-cells" > + - "#size-cells" > + - ranges > + > +patternProperties: > + "^usb@[0-9a-f]+$": > + type: object > + description: | > + usbphy node should have '1' usb controller subnode. > + It could be Cadence USB3 DRD controller. > + Cadence USB3 should follow the bindings specified in > + Documentation/devicetree/bindings/usb/cdns,usb3.yaml Why is the controller a child of the phy? > + > +additionalProperties: false > + > +examples: > + - | > + usbphy@10200000 { > + compatible = "starfive,jh7110-usb"; > + reg = <0x10210000 0x1000>, > + <0x10200000 0x1000>; > + reg-names = "usb3", "usb2"; > + clocks = <&syscrg 95>, > + <&stgcrg 6>, > + <&stgcrg 4>, > + <&stgcrg 5>, > + <&stgcrg 1>, > + <&stgcrg 3>, > + <&stgcrg 2>; > + clock-names = "usb_125m", "usb0_app_125", "usb0_lpm", > + "usb0_stb", "usb0_apb", "usb0_axi", "usb0_utmi_apb"; > + resets = <&stgcrg 10>, > + <&stgcrg 8>, > + <&stgcrg 7>, > + <&stgcrg 9>; > + starfive,stg-syscon = <&stg_syscon 0x4 0xc4 0x148 0x1f4>; > + starfive,sys-syscon = <&sys_syscon 0x18>; > + dr_mode = "host"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + usb@10100000 { > + compatible = "cdns,usb3"; This needs a platform specific compatible. > + reg = <0x10100000 0x10000>, > + <0x10110000 0x10000>, > + <0x10120000 0x10000>; > + reg-names = "otg", "xhci", "dev"; > + interrupts = <100>, <108>, <110>; > + interrupt-names = "host", "peripheral", "otg"; > + phy-names = "cdns3,usb3-phy", "cnds3,usb2-phy"; > + maximum-speed = "super-speed"; > + }; > + }; > -- > 2.17.1 >
On 2023/3/8 22:06, Rob Herring wrote: > > On Wed, 08 Mar 2023 16:27:58 +0800, Minda Chen wrote: >> Add StarFive JH7110 SoC USB 3.0 phy dt-binding. >> USB controller is cadence USB 3.0 IP. >> >> Signed-off-by: Minda Chen <minda.chen@starfivetech.com> >> --- >> .../bindings/phy/starfive,jh7110-usb-phy.yaml | 158 ++++++++++++++++++ >> 1 file changed, 158 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml >> > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dtb: usb@10100000: phy-names:1: 'anyOf' conditional failed, one must be fixed: > 'cdns3,usb2-phy' was expected > 'cdns3,usb3-phy' was expected > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/cdns,usb3.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dtb: usb@10100000: 'phys' is a dependency of 'phy-names' > From schema: /usr/local/lib/python3.10/dist-packages/dtschema/schemas/phy/phy-consumer.yaml > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230308082800.3008-2-minda.chen@starfivetech.com > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. > I am sorry about this, I just run dtbs_check, not dt_binding_check. Next version I will fix it.
On 2023/3/9 2:12, Rob Herring wrote: > On Wed, Mar 08, 2023 at 04:27:58PM +0800, Minda Chen wrote: >> Add StarFive JH7110 SoC USB 3.0 phy dt-binding. >> USB controller is cadence USB 3.0 IP. >> >> Signed-off-by: Minda Chen <minda.chen@starfivetech.com> >> --- >> .../bindings/phy/starfive,jh7110-usb-phy.yaml | 158 ++++++++++++++++++ >> 1 file changed, 158 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml >> >> diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml >> new file mode 100644 >> index 000000000000..daa88d065deb >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml > > Filename should match the compatible. The filename seems more correct > than the compatible... > [1] jh7110 USB dts configure is similar to Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml But we have PHY (10200000). So I will add Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml as a wrap level. starfive,jh7110-usb-phy.yaml contains only phy setting. >> @@ -0,0 +1,158 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: StarFive USB 2.0 and 3.0 PHY >> + >> +maintainers: >> + - Minda Chen<minda.chen@starfivetech.com> >> + >> +properties: >> + compatible: >> + items: >> + - const: starfive,jh7110-usb > > What's the USB controller called? > I will change to "starfive,jh7110-usb-phy" >> + >> + reg: >> + maxItems: 2 >> + >> + reg-names: >> + items: >> + - const: usb3 >> + - const: usb2 >> + >> + clocks: >> + items: >> + - description: usb 125m clock >> + - description: app 125m clock >> + - description: lpm clock >> + - description: stb clock >> + - description: apb clock >> + - description: axi clock >> + - description: utmi apb clock >> + >> + clock-names: >> + items: >> + - const: usb_125m >> + - const: usb0_app_125 >> + - const: usb0_lpm >> + - const: usb0_stb >> + - const: usb0_apb >> + - const: usb0_axi >> + - const: usb0_utmi_apb > > usb_ and usb0_ is redundant, drop. > ok >> + >> + resets: >> + items: >> + - description: USB0_PWRUP reset >> + - description: USB0_APB reset >> + - description: USB0_AXI reset >> + - description: USB0_UTMI_APB reset >> + >> + starfive,sys-syscon: >> + $ref: /schemas/types.yaml#/definitions/phandle-array >> + items: >> + items: > ok > Are there multiple entries of phandle+offset because this says there > are. You want '- items:' here to limit it to 1 phandle+offset. > >> + - description: phandle to System Register Controller sys_syscon node. >> + - description: offset of SYS_SYSCONSAIF__SYSCFG register for USB. >> + description: >> + The phandle to System Register Controller syscon node and the offset >> + of SYS_SYSCONSAIF__SYSCFG register for USB. >> + >> + starfive,stg-syscon: >> + $ref: /schemas/types.yaml#/definitions/phandle-array >> + items: >> + items: > > Same here. > ok >> + - description: phandle to System Register Controller stg_syscon node. >> + - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for USB. >> + - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for USB. >> + - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for USB. >> + - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for USB. >> + description: >> + The phandle to System Register Controller syscon node and the offset >> + of STG_SYSCONSAIF__SYSCFG register for USB. Total 4 regsisters offset >> + for USB. >> + >> + dr_mode: > > Usually this belongs in the controller node. > cdns3 usb controller IP default set to host mode. If cdns3 usb controller "dr_mode" set to "peripheral", cdns3 controller can't be registered. in driver/usb/cdns3/core.c 132 } else if (cdns->dr_mode != dr_mode) { 133 dev_err(dev, "Incorrect DRD configuration\n"); 134 return -EINVAL; 135 } If dr_mode is not set in int wrap level, peripheral mode can not be work. And I see other USB PHY contain dr-mode setting. >> + description: PHY mode. >> + enum: >> + - host >> + - peripheral >> + - otg >> + >> + "#address-cells": >> + maximum: 2 >> + >> + "#size-cells": >> + maximum: 2 >> + >> + ranges: true >> + >> + starfive,usb2-only: >> + type: boolean >> + description: Set USB using usb 2.0 phy. Supprt USB 2.0 only > > The 'maximum-speed' property in the controller should be enough. Why is > this needed. > maybe I can delete this setting. > Being a PHY, you are missing #phy-cells. > ok >> + >> +required: >> + - compatible >> + - reg >> + - reg-names >> + - clocks >> + - clock-names >> + - resets >> + - starfive,sys-syscon >> + - starfive,stg-syscon >> + - dr_mode >> + - "#address-cells" >> + - "#size-cells" >> + - ranges >> + >> +patternProperties: >> + "^usb@[0-9a-f]+$": >> + type: object >> + description: | >> + usbphy node should have '1' usb controller subnode. >> + It could be Cadence USB3 DRD controller. >> + Cadence USB3 should follow the bindings specified in >> + Documentation/devicetree/bindings/usb/cdns,usb3.yaml > > Why is the controller a child of the phy? > same as [1]. I will change this . >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + usbphy@10200000 { >> + compatible = "starfive,jh7110-usb"; >> + reg = <0x10210000 0x1000>, >> + <0x10200000 0x1000>; >> + reg-names = "usb3", "usb2"; >> + clocks = <&syscrg 95>, >> + <&stgcrg 6>, >> + <&stgcrg 4>, >> + <&stgcrg 5>, >> + <&stgcrg 1>, >> + <&stgcrg 3>, >> + <&stgcrg 2>; >> + clock-names = "usb_125m", "usb0_app_125", "usb0_lpm", >> + "usb0_stb", "usb0_apb", "usb0_axi", "usb0_utmi_apb"; >> + resets = <&stgcrg 10>, >> + <&stgcrg 8>, >> + <&stgcrg 7>, >> + <&stgcrg 9>; >> + starfive,stg-syscon = <&stg_syscon 0x4 0xc4 0x148 0x1f4>; >> + starfive,sys-syscon = <&sys_syscon 0x18>; >> + dr_mode = "host"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + usb@10100000 { >> + compatible = "cdns,usb3"; > > This needs a platform specific compatible. > same as [1] >> + reg = <0x10100000 0x10000>, >> + <0x10110000 0x10000>, >> + <0x10120000 0x10000>; >> + reg-names = "otg", "xhci", "dev"; >> + interrupts = <100>, <108>, <110>; >> + interrupt-names = "host", "peripheral", "otg"; >> + phy-names = "cdns3,usb3-phy", "cnds3,usb2-phy"; >> + maximum-speed = "super-speed"; >> + }; >> + }; >> -- >> 2.17.1 >>
On 08/03/2023 09:27, Minda Chen wrote: > Add StarFive JH7110 SoC USB 3.0 phy dt-binding. > USB controller is cadence USB 3.0 IP. Subject: drop second/last, redundant "binding". The "dt-bindings" prefix is already stating that these are bindings. > > Signed-off-by: Minda Chen <minda.chen@starfivetech.com> > --- > .../bindings/phy/starfive,jh7110-usb-phy.yaml | 158 ++++++++++++++++++ > 1 file changed, 158 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml > > diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml > new file mode 100644 > index 000000000000..daa88d065deb > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml > @@ -0,0 +1,158 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: StarFive USB 2.0 and 3.0 PHY > + > +maintainers: > + - Minda Chen<minda.chen@starfivetech.com> Missing space > + > +properties: > + compatible: > + items: Drop items, it's just one item. > + - const: starfive,jh7110-usb > + > + reg: > + maxItems: 2 > + > + reg-names: > + items: > + - const: usb3 > + - const: usb2 > + > + clocks: > + items: > + - description: usb 125m clock > + - description: app 125m clock > + - description: lpm clock > + - description: stb clock > + - description: apb clock > + - description: axi clock > + - description: utmi apb clock > + > + clock-names: > + items: > + - const: usb_125m > + - const: usb0_app_125 > + - const: usb0_lpm > + - const: usb0_stb > + - const: usb0_apb > + - const: usb0_axi > + - const: usb0_utmi_apb > + > + resets: > + items: > + - description: USB0_PWRUP reset > + - description: USB0_APB reset > + - description: USB0_AXI reset > + - description: USB0_UTMI_APB reset > + > + starfive,sys-syscon: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + items: > + items: > + - description: phandle to System Register Controller sys_syscon node. > + - description: offset of SYS_SYSCONSAIF__SYSCFG register for USB. > + description: > + The phandle to System Register Controller syscon node and the offset > + of SYS_SYSCONSAIF__SYSCFG register for USB. > + > + starfive,stg-syscon: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + items: > + items: > + - description: phandle to System Register Controller stg_syscon node. > + - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for USB. > + - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for USB. > + - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for USB. > + - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for USB. > + description: > + The phandle to System Register Controller syscon node and the offset > + of STG_SYSCONSAIF__SYSCFG register for USB. Total 4 regsisters offset > + for USB. > + > + dr_mode: > + description: PHY mode. > + enum: > + - host > + - peripheral > + - otg > + > + "#address-cells": > + maximum: 2 > + > + "#size-cells": > + maximum: 2 > + > + ranges: true > + > + starfive,usb2-only: > + type: boolean > + description: Set USB using usb 2.0 phy. Supprt USB 2.0 only > + > +required: > + - compatible > + - reg > + - reg-names > + - clocks > + - clock-names > + - resets > + - starfive,sys-syscon > + - starfive,stg-syscon > + - dr_mode > + - "#address-cells" > + - "#size-cells" > + - ranges > + > +patternProperties: This goes before required block > + "^usb@[0-9a-f]+$": > + type: object > + description: | > + usbphy node should have '1' usb controller subnode. > + It could be Cadence USB3 DRD controller. > + Cadence USB3 should follow the bindings specified in > + Documentation/devicetree/bindings/usb/cdns,usb3.yaml $ref instead of free form text Best regards, Krzysztof
On 2023/3/9 18:07, Krzysztof Kozlowski wrote: > On 08/03/2023 09:27, Minda Chen wrote: >> Add StarFive JH7110 SoC USB 3.0 phy dt-binding. >> USB controller is cadence USB 3.0 IP. > > Subject: drop second/last, redundant "binding". The "dt-bindings" prefix > is already stating that these are bindings. > >> >> Signed-off-by: Minda Chen <minda.chen@starfivetech.com> >> --- >> .../bindings/phy/starfive,jh7110-usb-phy.yaml | 158 ++++++++++++++++++ >> 1 file changed, 158 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml >> >> diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml >> new file mode 100644 >> index 000000000000..daa88d065deb >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml >> @@ -0,0 +1,158 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: StarFive USB 2.0 and 3.0 PHY >> + >> +maintainers: >> + - Minda Chen<minda.chen@starfivetech.com> > > Missing space > >> + >> +properties: >> + compatible: >> + items: > > Drop items, it's just one item. > > >> + - const: starfive,jh7110-usb >> + >> + reg: >> + maxItems: 2 >> + >> + reg-names: >> + items: >> + - const: usb3 >> + - const: usb2 >> + >> + clocks: >> + items: >> + - description: usb 125m clock >> + - description: app 125m clock >> + - description: lpm clock >> + - description: stb clock >> + - description: apb clock >> + - description: axi clock >> + - description: utmi apb clock >> + >> + clock-names: >> + items: >> + - const: usb_125m >> + - const: usb0_app_125 >> + - const: usb0_lpm >> + - const: usb0_stb >> + - const: usb0_apb >> + - const: usb0_axi >> + - const: usb0_utmi_apb >> + >> + resets: >> + items: >> + - description: USB0_PWRUP reset >> + - description: USB0_APB reset >> + - description: USB0_AXI reset >> + - description: USB0_UTMI_APB reset >> + >> + starfive,sys-syscon: >> + $ref: /schemas/types.yaml#/definitions/phandle-array >> + items: >> + items: >> + - description: phandle to System Register Controller sys_syscon node. >> + - description: offset of SYS_SYSCONSAIF__SYSCFG register for USB. >> + description: >> + The phandle to System Register Controller syscon node and the offset >> + of SYS_SYSCONSAIF__SYSCFG register for USB. >> + >> + starfive,stg-syscon: >> + $ref: /schemas/types.yaml#/definitions/phandle-array >> + items: >> + items: >> + - description: phandle to System Register Controller stg_syscon node. >> + - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for USB. >> + - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for USB. >> + - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for USB. >> + - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for USB. >> + description: >> + The phandle to System Register Controller syscon node and the offset >> + of STG_SYSCONSAIF__SYSCFG register for USB. Total 4 regsisters offset >> + for USB. >> + >> + dr_mode: >> + description: PHY mode. >> + enum: >> + - host >> + - peripheral >> + - otg >> + >> + "#address-cells": >> + maximum: 2 >> + >> + "#size-cells": >> + maximum: 2 >> + >> + ranges: true >> + >> + starfive,usb2-only: >> + type: boolean >> + description: Set USB using usb 2.0 phy. Supprt USB 2.0 only >> + >> +required: >> + - compatible >> + - reg >> + - reg-names >> + - clocks >> + - clock-names >> + - resets >> + - starfive,sys-syscon >> + - starfive,stg-syscon >> + - dr_mode >> + - "#address-cells" >> + - "#size-cells" >> + - ranges >> + >> +patternProperties: > > This goes before required block > >> + "^usb@[0-9a-f]+$": >> + type: object >> + description: | >> + usbphy node should have '1' usb controller subnode. >> + It could be Cadence USB3 DRD controller. >> + Cadence USB3 should follow the bindings specified in >> + Documentation/devicetree/bindings/usb/cdns,usb3.yaml > > $ref instead of free form text > > ok, thanks. Next version I will follow the comments to change. > Best regards, > Krzysztof >
diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml new file mode 100644 index 000000000000..daa88d065deb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive USB 2.0 and 3.0 PHY + +maintainers: + - Minda Chen<minda.chen@starfivetech.com> + +properties: + compatible: + items: + - const: starfive,jh7110-usb + + reg: + maxItems: 2 + + reg-names: + items: + - const: usb3 + - const: usb2 + + clocks: + items: + - description: usb 125m clock + - description: app 125m clock + - description: lpm clock + - description: stb clock + - description: apb clock + - description: axi clock + - description: utmi apb clock + + clock-names: + items: + - const: usb_125m + - const: usb0_app_125 + - const: usb0_lpm + - const: usb0_stb + - const: usb0_apb + - const: usb0_axi + - const: usb0_utmi_apb + + resets: + items: + - description: USB0_PWRUP reset + - description: USB0_APB reset + - description: USB0_AXI reset + - description: USB0_UTMI_APB reset + + starfive,sys-syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle to System Register Controller sys_syscon node. + - description: offset of SYS_SYSCONSAIF__SYSCFG register for USB. + description: + The phandle to System Register Controller syscon node and the offset + of SYS_SYSCONSAIF__SYSCFG register for USB. + + starfive,stg-syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle to System Register Controller stg_syscon node. + - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for USB. + - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for USB. + - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for USB. + - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for USB. + description: + The phandle to System Register Controller syscon node and the offset + of STG_SYSCONSAIF__SYSCFG register for USB. Total 4 regsisters offset + for USB. + + dr_mode: + description: PHY mode. + enum: + - host + - peripheral + - otg + + "#address-cells": + maximum: 2 + + "#size-cells": + maximum: 2 + + ranges: true + + starfive,usb2-only: + type: boolean + description: Set USB using usb 2.0 phy. Supprt USB 2.0 only + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - resets + - starfive,sys-syscon + - starfive,stg-syscon + - dr_mode + - "#address-cells" + - "#size-cells" + - ranges + +patternProperties: + "^usb@[0-9a-f]+$": + type: object + description: | + usbphy node should have '1' usb controller subnode. + It could be Cadence USB3 DRD controller. + Cadence USB3 should follow the bindings specified in + Documentation/devicetree/bindings/usb/cdns,usb3.yaml + +additionalProperties: false + +examples: + - | + usbphy@10200000 { + compatible = "starfive,jh7110-usb"; + reg = <0x10210000 0x1000>, + <0x10200000 0x1000>; + reg-names = "usb3", "usb2"; + clocks = <&syscrg 95>, + <&stgcrg 6>, + <&stgcrg 4>, + <&stgcrg 5>, + <&stgcrg 1>, + <&stgcrg 3>, + <&stgcrg 2>; + clock-names = "usb_125m", "usb0_app_125", "usb0_lpm", + "usb0_stb", "usb0_apb", "usb0_axi", "usb0_utmi_apb"; + resets = <&stgcrg 10>, + <&stgcrg 8>, + <&stgcrg 7>, + <&stgcrg 9>; + starfive,stg-syscon = <&stg_syscon 0x4 0xc4 0x148 0x1f4>; + starfive,sys-syscon = <&sys_syscon 0x18>; + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usb@10100000 { + compatible = "cdns,usb3"; + reg = <0x10100000 0x10000>, + <0x10110000 0x10000>, + <0x10120000 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <100>, <108>, <110>; + interrupt-names = "host", "peripheral", "otg"; + phy-names = "cdns3,usb3-phy", "cnds3,usb2-phy"; + maximum-speed = "super-speed"; + }; + };
Add StarFive JH7110 SoC USB 3.0 phy dt-binding. USB controller is cadence USB 3.0 IP. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> --- .../bindings/phy/starfive,jh7110-usb-phy.yaml | 158 ++++++++++++++++++ 1 file changed, 158 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml