| Message ID | 20230310202922.2459680-10-martin.blumenstingl@googlemail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | rtw88: Add SDIO support | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
> -----Original Message----- > From: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > Sent: Saturday, March 11, 2023 4:29 AM > To: linux-wireless@vger.kernel.org > Cc: Yan-Hsuan Chuang <tony0620emma@gmail.com>; Kalle Valo <kvalo@kernel.org>; Ulf Hansson > <ulf.hansson@linaro.org>; linux-kernel@vger.kernel.org; netdev@vger.kernel.org; > linux-mmc@vger.kernel.org; Chris Morgan <macroalpha82@gmail.com>; Nitin Gupta <nitin.gupta981@gmail.com>; > Neo Jou <neojou@gmail.com>; Ping-Ke Shih <pkshih@realtek.com>; Jernej Skrabec <jernej.skrabec@gmail.com>; > Martin Blumenstingl <martin.blumenstingl@googlemail.com> > Subject: [PATCH v2 RFC 9/9] wifi: rtw88: Add support for the SDIO based RTL8821CS chipset > > Wire up RTL8821CS chipset support using the new rtw88 SDIO HCI code as > well as the existing RTL8821C chipset code. > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > --- > Changes since v1: > - use /* ... */ style for copyright comments > > > drivers/net/wireless/realtek/rtw88/Kconfig | 11 ++++++ > drivers/net/wireless/realtek/rtw88/Makefile | 3 ++ > .../net/wireless/realtek/rtw88/rtw8821cs.c | 35 +++++++++++++++++++ > 3 files changed, 49 insertions(+) > create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8821cs.c > [...] > diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821cs.c > b/drivers/net/wireless/realtek/rtw88/rtw8821cs.c > new file mode 100644 > index 000000000000..7ad7c13ac9e6 > --- /dev/null > +++ b/drivers/net/wireless/realtek/rtw88/rtw8821cs.c > @@ -0,0 +1,35 @@ > +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause > +/* Copyright(c) Martin Blumenstingl <martin.blumenstingl@googlemail.com> > + */ > + > +#include <linux/mmc/sdio_func.h> > +#include <linux/mmc/sdio_ids.h> > +#include <linux/module.h> > +#include "sdio.h" > +#include "rtw8821c.h" nit: alphabetic order I run sparse/smatch with this patchset, and smatch warns: 1. drivers/net/wireless/realtek/rtw88/mac.c:313 rtw_mac_power_switch() error: uninitialized symbol 'imr'. This should be a false-alarm, but just initialize imr to 0 to avoid this. 2. drivers/net/wireless/realtek/rtw88/sdio.c:136 rtw_sdio_read_indirect_bytes() error: uninitialized symbol 'ret'. This should be a false-alarm too. I guess it considers 'count = 0' is possible. Ping-Ke
On Fri, Mar 10, 2023 at 09:29:22PM +0100, Martin Blumenstingl wrote: > Wire up RTL8821CS chipset support using the new rtw88 SDIO HCI code as > well as the existing RTL8821C chipset code. > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > --- > Changes since v1: > - use /* ... */ style for copyright comments > > > drivers/net/wireless/realtek/rtw88/Kconfig | 11 ++++++ > drivers/net/wireless/realtek/rtw88/Makefile | 3 ++ > .../net/wireless/realtek/rtw88/rtw8821cs.c | 35 +++++++++++++++++++ > 3 files changed, 49 insertions(+) > create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8821cs.c > > diff --git a/drivers/net/wireless/realtek/rtw88/Kconfig b/drivers/net/wireless/realtek/rtw88/Kconfig > index 6b65da81127f..29eb2f8e0eb7 100644 > --- a/drivers/net/wireless/realtek/rtw88/Kconfig > +++ b/drivers/net/wireless/realtek/rtw88/Kconfig > @@ -133,6 +133,17 @@ config RTW88_8821CE > > 802.11ac PCIe wireless network adapter > > +config RTW88_8821CS > + tristate "Realtek 8821CS SDIO wireless network adapter" > + depends on MMC > + select RTW88_CORE > + select RTW88_SDIO > + select RTW88_8821C > + help > + Select this option will enable support for 8821CS chipset > + > + 802.11ac SDIO wireless network adapter > + > config RTW88_8821CU > tristate "Realtek 8821CU USB wireless network adapter" > depends on USB > diff --git a/drivers/net/wireless/realtek/rtw88/Makefile b/drivers/net/wireless/realtek/rtw88/Makefile > index 6105c2745bda..82979b30ae8d 100644 > --- a/drivers/net/wireless/realtek/rtw88/Makefile > +++ b/drivers/net/wireless/realtek/rtw88/Makefile > @@ -59,6 +59,9 @@ rtw88_8821c-objs := rtw8821c.o rtw8821c_table.o > obj-$(CONFIG_RTW88_8821CE) += rtw88_8821ce.o > rtw88_8821ce-objs := rtw8821ce.o > > +obj-$(CONFIG_RTW88_8821CS) += rtw88_8821cs.o > +rtw88_8821cs-objs := rtw8821cs.o > + > obj-$(CONFIG_RTW88_8821CU) += rtw88_8821cu.o > rtw88_8821cu-objs := rtw8821cu.o > > diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821cs.c b/drivers/net/wireless/realtek/rtw88/rtw8821cs.c > new file mode 100644 > index 000000000000..7ad7c13ac9e6 > --- /dev/null > +++ b/drivers/net/wireless/realtek/rtw88/rtw8821cs.c > @@ -0,0 +1,35 @@ > +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause > +/* Copyright(c) Martin Blumenstingl <martin.blumenstingl@googlemail.com> > + */ > + > +#include <linux/mmc/sdio_func.h> > +#include <linux/mmc/sdio_ids.h> > +#include <linux/module.h> > +#include "sdio.h" > +#include "rtw8821c.h" > + > +static const struct sdio_device_id rtw_8821cs_id_table[] = { > + { > + SDIO_DEVICE(SDIO_VENDOR_ID_REALTEK, > + SDIO_DEVICE_ID_REALTEK_RTW8821CS), > + .driver_data = (kernel_ulong_t)&rtw8821c_hw_spec, > + }, > + {} > +}; > +MODULE_DEVICE_TABLE(sdio, rtw_8821cs_id_table); > + > +static struct sdio_driver rtw_8821cs_driver = { > + .name = "rtw_8821cs", > + .probe = rtw_sdio_probe, > + .remove = rtw_sdio_remove, > + .id_table = rtw_8821cs_id_table, > + .drv = { > + .pm = &rtw_sdio_pm_ops, > + .shutdown = rtw_sdio_shutdown, > + } > +}; > +module_sdio_driver(rtw_8821cs_driver); > + > +MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); > +MODULE_DESCRIPTION("Realtek 802.11ac wireless 8821cs driver"); > +MODULE_LICENSE("Dual BSD/GPL"); > -- > 2.39.2 > Overall it works well for me, but when I resume from suspend I get the following filling up my dmesg: rtw_8821cs mmc3:0001:1: sdio read8 failed (0x86): -110 So suspend/resume seems to be an issue, but otherwise it works well for me. Chris Morgan
Hi Chris, On Thu, Mar 16, 2023 at 8:59 PM Chris Morgan <macroalpha82@gmail.com> wrote: [...] > > +MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); > > +MODULE_DESCRIPTION("Realtek 802.11ac wireless 8821cs driver"); > > +MODULE_LICENSE("Dual BSD/GPL"); > > -- > > 2.39.2 > > > > Overall it works well for me, but when I resume from suspend I get the > following filling up my dmesg: > > rtw_8821cs mmc3:0001:1: sdio read8 failed (0x86): -110 > > So suspend/resume seems to be an issue, but otherwise it works well > for me. Thanks for reporting this issue! I have a fix in my local tree and I'm testing it currently. If you want to try it for yourself (before I send an updated series) you can just replace one function in sdio.c: static int __maybe_unused rtw_sdio_suspend(struct device *dev) { struct sdio_func *func = dev_to_sdio_func(dev); struct ieee80211_hw *hw = dev_get_drvdata(dev); struct rtw_dev *rtwdev = hw->priv; int ret; ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); if (ret) rtw_err(rtwdev, "Failed to host PM flag MMC_PM_KEEP_POWER"); return ret; } Best regards, Martin
diff --git a/drivers/net/wireless/realtek/rtw88/Kconfig b/drivers/net/wireless/realtek/rtw88/Kconfig index 6b65da81127f..29eb2f8e0eb7 100644 --- a/drivers/net/wireless/realtek/rtw88/Kconfig +++ b/drivers/net/wireless/realtek/rtw88/Kconfig @@ -133,6 +133,17 @@ config RTW88_8821CE 802.11ac PCIe wireless network adapter +config RTW88_8821CS + tristate "Realtek 8821CS SDIO wireless network adapter" + depends on MMC + select RTW88_CORE + select RTW88_SDIO + select RTW88_8821C + help + Select this option will enable support for 8821CS chipset + + 802.11ac SDIO wireless network adapter + config RTW88_8821CU tristate "Realtek 8821CU USB wireless network adapter" depends on USB diff --git a/drivers/net/wireless/realtek/rtw88/Makefile b/drivers/net/wireless/realtek/rtw88/Makefile index 6105c2745bda..82979b30ae8d 100644 --- a/drivers/net/wireless/realtek/rtw88/Makefile +++ b/drivers/net/wireless/realtek/rtw88/Makefile @@ -59,6 +59,9 @@ rtw88_8821c-objs := rtw8821c.o rtw8821c_table.o obj-$(CONFIG_RTW88_8821CE) += rtw88_8821ce.o rtw88_8821ce-objs := rtw8821ce.o +obj-$(CONFIG_RTW88_8821CS) += rtw88_8821cs.o +rtw88_8821cs-objs := rtw8821cs.o + obj-$(CONFIG_RTW88_8821CU) += rtw88_8821cu.o rtw88_8821cu-objs := rtw8821cu.o diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821cs.c b/drivers/net/wireless/realtek/rtw88/rtw8821cs.c new file mode 100644 index 000000000000..7ad7c13ac9e6 --- /dev/null +++ b/drivers/net/wireless/realtek/rtw88/rtw8821cs.c @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* Copyright(c) Martin Blumenstingl <martin.blumenstingl@googlemail.com> + */ + +#include <linux/mmc/sdio_func.h> +#include <linux/mmc/sdio_ids.h> +#include <linux/module.h> +#include "sdio.h" +#include "rtw8821c.h" + +static const struct sdio_device_id rtw_8821cs_id_table[] = { + { + SDIO_DEVICE(SDIO_VENDOR_ID_REALTEK, + SDIO_DEVICE_ID_REALTEK_RTW8821CS), + .driver_data = (kernel_ulong_t)&rtw8821c_hw_spec, + }, + {} +}; +MODULE_DEVICE_TABLE(sdio, rtw_8821cs_id_table); + +static struct sdio_driver rtw_8821cs_driver = { + .name = "rtw_8821cs", + .probe = rtw_sdio_probe, + .remove = rtw_sdio_remove, + .id_table = rtw_8821cs_id_table, + .drv = { + .pm = &rtw_sdio_pm_ops, + .shutdown = rtw_sdio_shutdown, + } +}; +module_sdio_driver(rtw_8821cs_driver); + +MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); +MODULE_DESCRIPTION("Realtek 802.11ac wireless 8821cs driver"); +MODULE_LICENSE("Dual BSD/GPL");
Wire up RTL8821CS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8821C chipset code. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- Changes since v1: - use /* ... */ style for copyright comments drivers/net/wireless/realtek/rtw88/Kconfig | 11 ++++++ drivers/net/wireless/realtek/rtw88/Makefile | 3 ++ .../net/wireless/realtek/rtw88/rtw8821cs.c | 35 +++++++++++++++++++ 3 files changed, 49 insertions(+) create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8821cs.c