| Message ID | 20230128053504.2099620-2-bhupesh.sharma@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [1/2] remoteproc: qcom: pas: Add sm6115 remoteprocs | expand |
On 28/01/2023 06:35, Bhupesh Sharma wrote: > This documents the aDSP, cDSP and MPSS DSPs present > on the SM6115 SoC. This should be patch #1 - before you start using compatibles. Subject: drop second/last, redundant "yaml file". The "dt-bindings" prefix is already stating that these are bindings and their expected format. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Sat, 28 Jan 2023 11:05:04 +0530, Bhupesh Sharma wrote: > This documents the aDSP, cDSP and MPSS DSPs present > on the SM6115 SoC. > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > .../bindings/remoteproc/qcom,sm6115-pas.yaml | 143 ++++++++++++++++++ > 1 file changed, 143 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/remoteproc/qcom,pas-common.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.example.dtb: remoteproc@ab00000: False schema does not allow {'compatible': ['qcom,sm6115-adsp-pas'], 'reg': [[179306496, 256]], 'clocks': [[4294967295, 0]], 'clock-names': ['xo'], 'firmware-name': ['qcom/sm6115/adsp.mdt'], 'interrupts-extended': [[4294967295, 0, 282, 1], [4294967295, 0, 1], [4294967295, 1, 1], [4294967295, 2, 1], [4294967295, 3, 1]], 'interrupt-names': ['wdog', 'fatal', 'ready', 'handover', 'stop-ack'], 'memory-region': [[4294967295]], 'power-domains': [[4294967295, 6], [4294967295, 7]], 'qcom,smem-states': [[4294967295, 0]], 'qcom,smem-state-names': ['stop'], 'glink-edge': {'interrupts': [[0, 277, 1]], 'label': ['lpass'], 'qcom,remote-pid': [[2]], 'mboxes': [[4294967295, 8]]}, '$nodename': ['remoteproc@ab00000']} From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.example.dtb: remoteproc@ab00000: Unevaluated properties are not allowed ('glink-edge', 'qcom,smem-state-names', 'qcom,smem-states' were unexpected) From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230128053504.2099620-2-bhupesh.sharma@linaro.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 28/01/2023 15:20, Rob Herring wrote: > > On Sat, 28 Jan 2023 11:05:04 +0530, Bhupesh Sharma wrote: >> This documents the aDSP, cDSP and MPSS DSPs present >> on the SM6115 SoC. >> >> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> >> --- >> .../bindings/remoteproc/qcom,sm6115-pas.yaml | 143 ++++++++++++++++++ >> 1 file changed, 143 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml >> > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > ./Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/remoteproc/qcom,pas-common.yaml This is expected - the qcom,pas-common.yaml is in remoteproc repo. Best regards, Krzysztof
On Sun, Jan 29, 2023 at 12:08:34PM +0100, Krzysztof Kozlowski wrote: > On 28/01/2023 15:20, Rob Herring wrote: > > > > On Sat, 28 Jan 2023 11:05:04 +0530, Bhupesh Sharma wrote: > >> This documents the aDSP, cDSP and MPSS DSPs present > >> on the SM6115 SoC. > >> > >> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > >> --- > >> .../bindings/remoteproc/qcom,sm6115-pas.yaml | 143 ++++++++++++++++++ > >> 1 file changed, 143 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml > >> > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > > > yamllint warnings/errors: > > > > dtschema/dtc warnings/errors: > > ./Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/remoteproc/qcom,pas-common.yaml > > This is expected - the qcom,pas-common.yaml is in remoteproc repo. Where is that dependency mentioned in this patch? If not mentioned, I will mention it for you with the error report. Rob
On 28/01/2023 06:35, Bhupesh Sharma wrote: > This documents the aDSP, cDSP and MPSS DSPs present > on the SM6115 SoC. > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > .../bindings/remoteproc/qcom,sm6115-pas.yaml | 143 ++++++++++++++++++ > 1 file changed, 143 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml > > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml > new file mode 100644 > index 000000000000..f5d1fa9f45f1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml > @@ -0,0 +1,143 @@ > +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/remoteproc/qcom,sm6115-pas.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm SM6115 Peripheral Authentication Service > + > +maintainers: > + - Bhupesh Sharma <bhupesh.sharma@linaro.org> > + > +description: > + Qualcomm SM6115 SoC Peripheral Authentication Service loads and boots > + firmware on the Qualcomm DSP Hexagon cores. > + > +properties: > + compatible: > + enum: > + - qcom,sm6115-adsp-pas > + - qcom,sm6115-cdsp-pas > + - qcom,sm6115-mpss-pas > + > + reg: > + maxItems: 1 > + > + clocks: > + items: > + - description: XO clock > + > + clock-names: > + items: > + - const: xo > + > + memory-region: > + minItems: 1 maxItems instead > + description: Reference to the reserved-memory for the Hexagon core > + > + smd-edge: false > + > + firmware-name: > + $ref: /schemas/types.yaml#/definitions/string > + description: Firmware name for the Hexagon core > + > +required: > + - compatible > + - reg also memory-region Best regards, Krzysztof
Hi Krzysztof, On 3/9/23 1:56 PM, Krzysztof Kozlowski wrote: > On 28/01/2023 06:35, Bhupesh Sharma wrote: >> This documents the aDSP, cDSP and MPSS DSPs present >> on the SM6115 SoC. >> >> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> >> --- >> .../bindings/remoteproc/qcom,sm6115-pas.yaml | 143 ++++++++++++++++++ >> 1 file changed, 143 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml >> >> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml >> new file mode 100644 >> index 000000000000..f5d1fa9f45f1 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml >> @@ -0,0 +1,143 @@ >> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/remoteproc/qcom,sm6115-pas.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm SM6115 Peripheral Authentication Service >> + >> +maintainers: >> + - Bhupesh Sharma <bhupesh.sharma@linaro.org> >> + >> +description: >> + Qualcomm SM6115 SoC Peripheral Authentication Service loads and boots >> + firmware on the Qualcomm DSP Hexagon cores. >> + >> +properties: >> + compatible: >> + enum: >> + - qcom,sm6115-adsp-pas >> + - qcom,sm6115-cdsp-pas >> + - qcom,sm6115-mpss-pas >> + >> + reg: >> + maxItems: 1 >> + >> + clocks: >> + items: >> + - description: XO clock >> + >> + clock-names: >> + items: >> + - const: xo >> + >> + memory-region: >> + minItems: 1 > > maxItems instead > >> + description: Reference to the reserved-memory for the Hexagon core >> + >> + smd-edge: false >> + >> + firmware-name: >> + $ref: /schemas/types.yaml#/definitions/string >> + description: Firmware name for the Hexagon core >> + >> +required: >> + - compatible >> + - reg > > also memory-region Since this patch was already picked up by Bjorn, I will send a fix as per your suggestion as a separate patch shortly. Thanks, Bhupesh
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml new file mode 100644 index 000000000000..f5d1fa9f45f1 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,sm6115-pas.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6115 Peripheral Authentication Service + +maintainers: + - Bhupesh Sharma <bhupesh.sharma@linaro.org> + +description: + Qualcomm SM6115 SoC Peripheral Authentication Service loads and boots + firmware on the Qualcomm DSP Hexagon cores. + +properties: + compatible: + enum: + - qcom,sm6115-adsp-pas + - qcom,sm6115-cdsp-pas + - qcom,sm6115-mpss-pas + + reg: + maxItems: 1 + + clocks: + items: + - description: XO clock + + clock-names: + items: + - const: xo + + memory-region: + minItems: 1 + description: Reference to the reserved-memory for the Hexagon core + + smd-edge: false + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: Firmware name for the Hexagon core + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/remoteproc/qcom,pas-common.yaml# + - if: + properties: + compatible: + enum: + - qcom,sm6115-adsp-pas + - qcom,sm6115-cdsp-pas + then: + properties: + interrupts: + maxItems: 5 + interrupt-names: + maxItems: 5 + else: + properties: + interrupts: + minItems: 6 + interrupt-names: + minItems: 6 + + - if: + properties: + compatible: + enum: + - qcom,sm6115-cdsp-pas + - qcom,sm6115-mpss-pas + then: + properties: + power-domains: + items: + - description: CX power domain + power-domain-names: + items: + - const: cx + + - if: + properties: + compatible: + enum: + - qcom,sm6115-adsp-pas + then: + properties: + power-domains: + items: + - description: LPI CX power domain + - description: LPI MX power domain + power-domain-names: + items: + - const: lcx + - const: lmx + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + remoteproc@ab00000 { + compatible = "qcom,sm6115-adsp-pas"; + reg = <0x0ab00000 0x100>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + firmware-name = "qcom/sm6115/adsp.mdt"; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + memory-region = <&pil_adsp_mem>; + + power-domains = <&rpmpd SM6115_VDD_LPI_CX>, + <&rpmpd SM6115_VDD_LPI_MX>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + + /* ... */ + + }; + };
This documents the aDSP, cDSP and MPSS DSPs present on the SM6115 SoC. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- .../bindings/remoteproc/qcom,sm6115-pas.yaml | 143 ++++++++++++++++++ 1 file changed, 143 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml