diff mbox series

[v2,2/2] arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio

Message ID 20230214171505.224602-2-ahalaney@redhat.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/2] dt-bindings: net: snps,dwmac: Fix snps,reset-delays-us dependency | expand

Commit Message

Andrew Halaney Feb. 14, 2023, 5:15 p.m. UTC
The deprecated property is named snps,reset-gpio, but this devicetree
used snps,reset-gpios instead which results in the reset not being used
and the following make dtbs_check error:

    ./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
        From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml

Use the preferred method of defining the reset gpio in the phy node
itself. Note that this drops the 10 us pre-delay, but prior this wasn't
used at all and a pre-delay doesn't make much sense in this context so
it should be fine.

Fixes: 8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---

Changes since v1:
    * Moved the reset into the ethernet-phy node itself instead of
      fixing the deprecated usage (for that reason I did not collect
      Fabio's review tag)

 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski Feb. 16, 2023, 8:26 a.m. UTC | #1
On 14/02/2023 18:15, Andrew Halaney wrote:
> The deprecated property is named snps,reset-gpio, but this devicetree
> used snps,reset-gpios instead which results in the reset not being used
> and the following make dtbs_check error:
> 
>     ./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
>         From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml
> 
> Use the preferred method of defining the reset gpio in the phy node
> itself. Note that this drops the 10 us pre-delay, but prior this wasn't
> used at all and a pre-delay doesn't make much sense in this context so
> it should be fine.
> 
> Fixes: 8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
> Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
> ---

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Shawn Guo March 14, 2023, 12:58 a.m. UTC | #2
On Tue, Feb 14, 2023 at 11:15:05AM -0600, Andrew Halaney wrote:
> The deprecated property is named snps,reset-gpio, but this devicetree
> used snps,reset-gpios instead which results in the reset not being used
> and the following make dtbs_check error:
> 
>     ./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
>         From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml
> 
> Use the preferred method of defining the reset gpio in the phy node
> itself. Note that this drops the 10 us pre-delay, but prior this wasn't
> used at all and a pre-delay doesn't make much sense in this context so
> it should be fine.
> 
> Fixes: 8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
> Signed-off-by: Andrew Halaney <ahalaney@redhat.com>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 1bcf228a22b8..852420349c01 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -121,8 +121,6 @@  &eqos {
 	phy-handle = <&ethphy0>;
 	nvmem-cells = <&fec_mac1>;
 	nvmem-cell-names = "mac-address";
-	snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
-	snps,reset-delays-us = <10 20 200000>;
 	status = "okay";
 
 	mdio {
@@ -136,6 +134,9 @@  ethphy0: ethernet-phy@0 {
 			eee-broken-1000t;
 			qca,disable-smarteee;
 			qca,disable-hibernation-mode;
+			reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
 			vddio-supply = <&vddio0>;
 
 			vddio0: vddio-regulator {