| Message ID | 20230206-topic-sm8450-upstream-dp-controller-v4-2-dca33f531e0d@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: add DP Controller to SM8350 & SM8450 DTS | expand |
On 9.03.2023 10:19, Neil Armstrong wrote: > The first QMP PHY is an USB3/DP combo phy, switch to the newly > documented bindings and register the clocks to the GCC > and DISPCC controllers. > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #SM8350-HDK > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/sm8350.dtsi | 42 +++++++++++++----------------------- > 1 file changed, 15 insertions(+), 27 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi > index 1c97e28da6ad..94e85313f15d 100644 > --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi > @@ -13,6 +13,7 @@ > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/interconnect/qcom,sm8350.h> > #include <dt-bindings/mailbox/qcom-ipcc.h> > +#include <dt-bindings/phy/phy-qcom-qmp.h> > #include <dt-bindings/power/qcom-rpmpd.h> > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > #include <dt-bindings/thermal/thermal.h> > @@ -653,7 +654,7 @@ gcc: clock-controller@100000 { > <&ufs_mem_phy_lanes 0>, > <&ufs_mem_phy_lanes 1>, > <&ufs_mem_phy_lanes 2>, > - <0>, > + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, > <0>; > }; > > @@ -2125,37 +2126,24 @@ usb_2_hsphy: phy@88e4000 { > resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; > }; > > - usb_1_qmpphy: phy-wrapper@88e9000 { > - compatible = "qcom,sm8350-qmp-usb3-phy"; > - reg = <0 0x088e9000 0 0x200>, > - <0 0x088e8000 0 0x20>; > - status = "disabled"; > - #address-cells = <2>; > - #size-cells = <2>; > - ranges; > + usb_1_qmpphy: phy@88e9000 { > + compatible = "qcom,sm8350-qmp-usb3-dp-phy"; > + reg = <0 0x088e8000 0 0x3000>; > > clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, > <&rpmhcc RPMH_CXO_CLK>, > - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; > - clock-names = "aux", "ref_clk_src", "com_aux"; > + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, > + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; > + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; > > resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, > <&gcc GCC_USB3_PHY_PRIM_BCR>; > reset-names = "phy", "common"; > > - usb_1_ssphy: phy@88e9200 { > - reg = <0 0x088e9200 0 0x200>, > - <0 0x088e9400 0 0x200>, > - <0 0x088e9c00 0 0x400>, > - <0 0x088e9600 0 0x200>, > - <0 0x088e9800 0 0x200>, > - <0 0x088e9a00 0 0x100>; > - #phy-cells = <0>; > - #clock-cells = <0>; > - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; > - clock-names = "pipe0"; > - clock-output-names = "usb3_phy_pipe_clk_src"; > - }; > + #clock-cells = <1>; > + #phy-cells = <1>; > + > + status = "disabled"; > }; > > usb_2_qmpphy: phy-wrapper@88eb000 { > @@ -2258,7 +2246,7 @@ usb_1_dwc3: usb@a600000 { > iommus = <&apps_smmu 0x0 0x0>; > snps,dis_u2_susphy_quirk; > snps,dis_enblslpm_quirk; > - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; > + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; > phy-names = "usb2-phy", "usb3-phy"; > }; > }; > @@ -2623,8 +2611,8 @@ dispcc: clock-controller@af00000 { > clocks = <&rpmhcc RPMH_CXO_CLK>, > <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>, > <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, > - <0>, > - <0>; > + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, > + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; > clock-names = "bi_tcxo", > "dsi0_phy_pll_out_byteclk", > "dsi0_phy_pll_out_dsiclk", >
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 1c97e28da6ad..94e85313f15d 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/thermal/thermal.h> @@ -653,7 +654,7 @@ gcc: clock-controller@100000 { <&ufs_mem_phy_lanes 0>, <&ufs_mem_phy_lanes 1>, <&ufs_mem_phy_lanes 2>, - <0>, + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>; }; @@ -2125,37 +2126,24 @@ usb_2_hsphy: phy@88e4000 { resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sm8350-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x20>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sm8350-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; }; usb_2_qmpphy: phy-wrapper@88eb000 { @@ -2258,7 +2246,7 @@ usb_1_dwc3: usb@a600000 { iommus = <&apps_smmu 0x0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -2623,8 +2611,8 @@ dispcc: clock-controller@af00000 { clocks = <&rpmhcc RPMH_CXO_CLK>, <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <0>, - <0>; + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk",