| Message ID | 20230317055203.2366868-3-xu.yang_2@nxp.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 451b15ed138ec15bffbebb58a00ebdd884c3e659 |
| Headers | show |
| Series | None | expand |
On Fri, Mar 17, 2023 at 01:52:03PM +0800, Xu Yang wrote: > The user may call role_store() when driver is handling > ci_handle_id_switch() which is triggerred by otg event or power lost > event. Unfortunately, the controller may go into chaos in this case. > Fix this by protecting it with mutex lock. > > Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") > cc: <stable@vger.kernel.org> > Acked-by: Peter Chen <peter.chen@kernel.org> > Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > > --- > changes since v1: > - modify description for mutex member > - wrap role variable in ci_handle_id_switch() too There are 2 "v2 2/2" patches here, which one is correct? Can you send a v3 with just the needed patches? thanks, greg k-h
> -----Original Message----- > From: Greg KH <gregkh@linuxfoundation.org> > Sent: Friday, March 17, 2023 2:02 PM > To: Xu Yang <xu.yang_2@nxp.com> > Cc: peter.chen@kernel.org; linux-usb@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>; Jun Li <jun.li@nxp.com> > Subject: [EXT] Re: [PATCH RESEND v2 2/2] usb: chipidea: core: fix possible concurrent when switch role > > Caution: EXT Email > > On Fri, Mar 17, 2023 at 01:52:03PM +0800, Xu Yang wrote: > > The user may call role_store() when driver is handling > > ci_handle_id_switch() which is triggerred by otg event or power lost > > event. Unfortunately, the controller may go into chaos in this case. > > Fix this by protecting it with mutex lock. > > > > Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") > > cc: <stable@vger.kernel.org> > > Acked-by: Peter Chen <peter.chen@kernel.org> > > Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > > > > --- > > changes since v1: > > - modify description for mutex member > > - wrap role variable in ci_handle_id_switch() too > > There are 2 "v2 2/2" patches here, which one is correct? Sorry, it's my mistake. > > Can you send a v3 with just the needed patches? V3 has been sent. Thanks, Xu Yang > > thanks, > > greg k-h
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 005c67cb3afb..f210b7489fd5 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -208,6 +208,7 @@ struct hw_bank { * @in_lpm: if the core in low power mode * @wakeup_int: if wakeup interrupt occur * @rev: The revision number for controller + * @mutex: protect code from concorrent running when doing role switch */ struct ci_hdrc { struct device *dev; @@ -260,6 +261,7 @@ struct ci_hdrc { bool in_lpm; bool wakeup_int; enum ci_revision rev; + struct mutex mutex; }; static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index eae4bf865a8e..d1d252c87e4f 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -987,8 +987,12 @@ static ssize_t role_store(struct device *dev, if (role == CI_ROLE_END) return -EINVAL; - if (role == ci->role) + mutex_lock(&ci->mutex); + + if (role == ci->role) { + mutex_unlock(&ci->mutex); return n; + } pm_runtime_get_sync(dev); disable_irq(ci->irq); @@ -998,6 +1002,7 @@ static ssize_t role_store(struct device *dev, ci_handle_vbus_change(ci); enable_irq(ci->irq); pm_runtime_put_sync(dev); + mutex_unlock(&ci->mutex); return (ret == 0) ? n : ret; } @@ -1033,6 +1038,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) return -ENOMEM; spin_lock_init(&ci->lock); + mutex_init(&ci->mutex); ci->dev = dev; ci->platdata = dev_get_platdata(dev); ci->imx28_write_fix = !!(ci->platdata->flags & diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index 622c3b68aa1e..f5490f2a5b6b 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -167,8 +167,10 @@ static int hw_wait_vbus_lower_bsv(struct ci_hdrc *ci) void ci_handle_id_switch(struct ci_hdrc *ci) { - enum ci_role role = ci_otg_role(ci); + enum ci_role role; + mutex_lock(&ci->mutex); + role = ci_otg_role(ci); if (role != ci->role) { dev_dbg(ci->dev, "switching from %s to %s\n", ci_role(ci)->name, ci->roles[role]->name); @@ -198,6 +200,7 @@ void ci_handle_id_switch(struct ci_hdrc *ci) if (role == CI_ROLE_GADGET) ci_handle_vbus_change(ci); } + mutex_unlock(&ci->mutex); } /** * ci_otg_work - perform otg (vbus/id) event handle
The user may call role_store() when driver is handling ci_handle_id_switch() which is triggerred by otg event or power lost event. Unfortunately, the controller may go into chaos in this case. Fix this by protecting it with mutex lock. Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> --- changes since v1: - modify description for mutex member - wrap role variable in ci_handle_id_switch() too --- drivers/usb/chipidea/ci.h | 2 ++ drivers/usb/chipidea/core.c | 8 +++++++- drivers/usb/chipidea/otg.c | 5 ++++- 3 files changed, 13 insertions(+), 2 deletions(-)