diff mbox series

[2/3] spi: atmel-quadspi: Free resources even if runtime resume failed in .remove()

Message ID 20230317084232.142257-3-u.kleine-koenig@pengutronix.de (mailing list archive)
State Accepted
Commit 9448bc1dee65f86c0fe64d9dea8b410af0586886
Headers show
Series spi: atmel-quadspi: Convert to platform remove callback returning void | expand

Commit Message

Uwe Kleine-König March 17, 2023, 8:42 a.m. UTC
An early error exit in atmel_qspi_remove() doesn't prevent the device
unbind. So this results in an spi controller with an unbound parent
and unmapped register space (because devm_ioremap_resource() is undone).
So using the remaining spi controller probably results in an oops.

Instead unregister the controller unconditionally and only skip hardware
access and clk disable.

Also add a warning about resume failing and return zero unconditionally.
The latter has the only effect to suppress a less helpful error message by
the spi core.

Fixes: 4a2f83b7f780 ("spi: atmel-quadspi: add runtime pm support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/atmel-quadspi.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

Comments

Tudor Ambarus March 17, 2023, 10:15 a.m. UTC | #1
On 3/17/23 08:42, Uwe Kleine-König wrote:
> An early error exit in atmel_qspi_remove() doesn't prevent the device
> unbind. So this results in an spi controller with an unbound parent
> and unmapped register space (because devm_ioremap_resource() is undone).
> So using the remaining spi controller probably results in an oops.
> 
> Instead unregister the controller unconditionally and only skip hardware
> access and clk disable.
> 
> Also add a warning about resume failing and return zero unconditionally.
> The latter has the only effect to suppress a less helpful error message by
> the spi core.
> 
> Fixes: 4a2f83b7f780 ("spi: atmel-quadspi: add runtime pm support")
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>

> ---
>  drivers/spi/atmel-quadspi.c | 24 +++++++++++++++++-------
>  1 file changed, 17 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
> index 0c6f80ddea57..713a4d6700fd 100644
> --- a/drivers/spi/atmel-quadspi.c
> +++ b/drivers/spi/atmel-quadspi.c
> @@ -706,18 +706,28 @@ static int atmel_qspi_remove(struct platform_device *pdev)
>  	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
>  	int ret;
>  
> -	ret = pm_runtime_resume_and_get(&pdev->dev);
> -	if (ret < 0)
> -		return ret;
> -
>  	spi_unregister_controller(ctrl);
> -	atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR);
> +
> +	ret = pm_runtime_get_sync(&pdev->dev);
> +	if (ret >= 0) {
> +		atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR);
> +		clk_disable(aq->qspick);
> +		clk_disable(aq->pclk);
> +	} else {
> +		/*
> +		 * atmel_qspi_runtime_{suspend,resume} just disable and enable
> +		 * the two clks respectively. So after resume failed these are
> +		 * off, and we skip hardware access and disabling these clks again.
> +		 */
> +		dev_warn(&pdev->dev, "Failed to resume device on remove\n");
> +	}
> +
> +	clk_unprepare(aq->qspick);
> +	clk_unprepare(aq->pclk);
>  
>  	pm_runtime_disable(&pdev->dev);
>  	pm_runtime_put_noidle(&pdev->dev);
>  
> -	clk_disable_unprepare(aq->qspick);
> -	clk_disable_unprepare(aq->pclk);
>  	return 0;
>  }
>
diff mbox series

Patch

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index 0c6f80ddea57..713a4d6700fd 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -706,18 +706,28 @@  static int atmel_qspi_remove(struct platform_device *pdev)
 	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
 	int ret;
 
-	ret = pm_runtime_resume_and_get(&pdev->dev);
-	if (ret < 0)
-		return ret;
-
 	spi_unregister_controller(ctrl);
-	atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR);
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret >= 0) {
+		atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR);
+		clk_disable(aq->qspick);
+		clk_disable(aq->pclk);
+	} else {
+		/*
+		 * atmel_qspi_runtime_{suspend,resume} just disable and enable
+		 * the two clks respectively. So after resume failed these are
+		 * off, and we skip hardware access and disabling these clks again.
+		 */
+		dev_warn(&pdev->dev, "Failed to resume device on remove\n");
+	}
+
+	clk_unprepare(aq->qspick);
+	clk_unprepare(aq->pclk);
 
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
 
-	clk_disable_unprepare(aq->qspick);
-	clk_disable_unprepare(aq->pclk);
 	return 0;
 }