| Message ID | 20230316172214.3899786-1-neeraj.sanjaykale@nxp.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for NXP bluetooth chipsets | expand |
Hi Neeraj, On Thu, Mar 16, 2023 at 10:22 AM Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> wrote: > > This patch adds a driver for NXP bluetooth chipsets. > > The driver is based on H4 protocol, and uses serdev APIs. It supports host > to chip power save feature, which is signalled by the host by asserting > break over UART TX lines, to put the chip into sleep state. > > To support this feature, break_ctl has also been added to serdev-tty along > with a new serdev API serdev_device_break_ctl(). > > This driver is capable of downloading firmware into the chip over UART. > > The document specifying device tree bindings for this driver is also > included in this patch series. > > Neeraj Sanjay Kale (4): > serdev: Replace all instances of ENOTSUPP with EOPNOTSUPP > serdev: Add method to assert break signal over tty UART port > dt-bindings: net: bluetooth: Add NXP bluetooth support > Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets > > .../net/bluetooth/nxp,88w8987-bt.yaml | 45 + > MAINTAINERS | 7 + > drivers/bluetooth/Kconfig | 12 + > drivers/bluetooth/Makefile | 1 + > drivers/bluetooth/btnxpuart.c | 1297 +++++++++++++++++ > drivers/tty/serdev/core.c | 17 +- > drivers/tty/serdev/serdev-ttyport.c | 16 +- > include/linux/serdev.h | 10 +- > 8 files changed, 1398 insertions(+), 7 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml > create mode 100644 drivers/bluetooth/btnxpuart.c > > -- > 2.34.1 If there are no new comments to be addressed by the end of the day I'm planning to merge this into bluetooth-next.
On Fri, Mar 17, 2023 at 01:00:11PM -0700, Luiz Augusto von Dentz wrote: > Hi Neeraj, > > On Thu, Mar 16, 2023 at 10:22 AM Neeraj Sanjay Kale > <neeraj.sanjaykale@nxp.com> wrote: > > > > This patch adds a driver for NXP bluetooth chipsets. > > > > The driver is based on H4 protocol, and uses serdev APIs. It supports host > > to chip power save feature, which is signalled by the host by asserting > > break over UART TX lines, to put the chip into sleep state. > > > > To support this feature, break_ctl has also been added to serdev-tty along > > with a new serdev API serdev_device_break_ctl(). > > > > This driver is capable of downloading firmware into the chip over UART. > > > > The document specifying device tree bindings for this driver is also > > included in this patch series. > > > > Neeraj Sanjay Kale (4): > > serdev: Replace all instances of ENOTSUPP with EOPNOTSUPP > > serdev: Add method to assert break signal over tty UART port > > dt-bindings: net: bluetooth: Add NXP bluetooth support > > Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets > > > > .../net/bluetooth/nxp,88w8987-bt.yaml | 45 + > > MAINTAINERS | 7 + > > drivers/bluetooth/Kconfig | 12 + > > drivers/bluetooth/Makefile | 1 + > > drivers/bluetooth/btnxpuart.c | 1297 +++++++++++++++++ > > drivers/tty/serdev/core.c | 17 +- > > drivers/tty/serdev/serdev-ttyport.c | 16 +- > > include/linux/serdev.h | 10 +- > > 8 files changed, 1398 insertions(+), 7 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml > > create mode 100644 drivers/bluetooth/btnxpuart.c > > > > -- > > 2.34.1 > > If there are no new comments to be addressed by the end of the day I'm > planning to merge this into bluetooth-next. FWIIW, as someone involved in the review of this series, I am fine with that. Even though I have only supplied tags for some of the patches; those for which I feel that it is appropriate.
Hi Simon, On Fri, Mar 17, 2023 at 1:42 PM Simon Horman <simon.horman@corigine.com> wrote: > > On Fri, Mar 17, 2023 at 01:00:11PM -0700, Luiz Augusto von Dentz wrote: > > Hi Neeraj, > > > > On Thu, Mar 16, 2023 at 10:22 AM Neeraj Sanjay Kale > > <neeraj.sanjaykale@nxp.com> wrote: > > > > > > This patch adds a driver for NXP bluetooth chipsets. > > > > > > The driver is based on H4 protocol, and uses serdev APIs. It supports host > > > to chip power save feature, which is signalled by the host by asserting > > > break over UART TX lines, to put the chip into sleep state. > > > > > > To support this feature, break_ctl has also been added to serdev-tty along > > > with a new serdev API serdev_device_break_ctl(). > > > > > > This driver is capable of downloading firmware into the chip over UART. > > > > > > The document specifying device tree bindings for this driver is also > > > included in this patch series. > > > > > > Neeraj Sanjay Kale (4): > > > serdev: Replace all instances of ENOTSUPP with EOPNOTSUPP > > > serdev: Add method to assert break signal over tty UART port > > > dt-bindings: net: bluetooth: Add NXP bluetooth support > > > Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets > > > > > > .../net/bluetooth/nxp,88w8987-bt.yaml | 45 + > > > MAINTAINERS | 7 + > > > drivers/bluetooth/Kconfig | 12 + > > > drivers/bluetooth/Makefile | 1 + > > > drivers/bluetooth/btnxpuart.c | 1297 +++++++++++++++++ > > > drivers/tty/serdev/core.c | 17 +- > > > drivers/tty/serdev/serdev-ttyport.c | 16 +- > > > include/linux/serdev.h | 10 +- > > > 8 files changed, 1398 insertions(+), 7 deletions(-) > > > create mode 100644 Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml > > > create mode 100644 drivers/bluetooth/btnxpuart.c > > > > > > -- > > > 2.34.1 > > > > If there are no new comments to be addressed by the end of the day I'm > > planning to merge this into bluetooth-next. > > FWIIW, as someone involved in the review of this series, I am fine with that. > Even though I have only supplied tags for some of the patches; > those for which I feel that it is appropriate. Thanks for the feedback and the review as well.
Hello: This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>: On Thu, 16 Mar 2023 22:52:10 +0530 you wrote: > This patch adds a driver for NXP bluetooth chipsets. > > The driver is based on H4 protocol, and uses serdev APIs. It supports host > to chip power save feature, which is signalled by the host by asserting > break over UART TX lines, to put the chip into sleep state. > > To support this feature, break_ctl has also been added to serdev-tty along > with a new serdev API serdev_device_break_ctl(). > > [...] Here is the summary with links: - [v13,1/4] serdev: Replace all instances of ENOTSUPP with EOPNOTSUPP https://git.kernel.org/bluetooth/bluetooth-next/c/d227f286d259 - [v13,2/4] serdev: Add method to assert break signal over tty UART port https://git.kernel.org/bluetooth/bluetooth-next/c/5ea260df53c2 - [v13,3/4] dt-bindings: net: bluetooth: Add NXP bluetooth support https://git.kernel.org/bluetooth/bluetooth-next/c/02986ce4a4fe - [v13,4/4] Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets https://git.kernel.org/bluetooth/bluetooth-next/c/3e662aa4453a You are awesome, thank you!