Message ID | 20230319191814.22067-2-ansuelsmth@gmail.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | net: Add basic LED support for switch/phy | expand |
On Sun, Mar 19, 2023 at 08:18:00PM +0100, Christian Marangi wrote: > Move qca8k_port_to_phy() to qca8k header as it's useful for future > reference in Switch LEDs module since the same logic is applied to get > the right index of the switch port. > Make it inline as it's simple function that just decrease the port. > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > Reviewed-by: Andrew Lunn <andrew@lunn.ch> > --- Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c index 55df4479ea30..459ea687444a 100644 --- a/drivers/net/dsa/qca/qca8k-8xxx.c +++ b/drivers/net/dsa/qca/qca8k-8xxx.c @@ -772,21 +772,6 @@ qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy, return ret; } -static u32 -qca8k_port_to_phy(int port) -{ - /* From Andrew Lunn: - * Port 0 has no internal phy. - * Port 1 has an internal PHY at MDIO address 0. - * Port 2 has an internal PHY at MDIO address 1. - * ... - * Port 5 has an internal PHY at MDIO address 4. - * Port 6 has no internal PHY. - */ - - return port - 1; -} - static int qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask) { diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h index 7996975d29d3..dd7deb9095d3 100644 --- a/drivers/net/dsa/qca/qca8k.h +++ b/drivers/net/dsa/qca/qca8k.h @@ -421,6 +421,20 @@ struct qca8k_fdb { u8 mac[6]; }; +static inline u32 qca8k_port_to_phy(int port) +{ + /* From Andrew Lunn: + * Port 0 has no internal phy. + * Port 1 has an internal PHY at MDIO address 0. + * Port 2 has an internal PHY at MDIO address 1. + * ... + * Port 5 has an internal PHY at MDIO address 4. + * Port 6 has no internal PHY. + */ + + return port - 1; +} + /* Common setup function */ extern const struct qca8k_mib_desc ar8327_mib[]; extern const struct regmap_access_table qca8k_readable_table;